THE PLAYLIST DIRECTIONS ARE NOT WORKING FOR ME

I FOLLOWED THE DIRECTIONS AS STATED AND CANNOT SEEM TO CREATE A PLAYLIST WHICH WAS LOST (1300 FIDDLE TUNES) WHEN I TRANSFERRED FROM DELL TO IMAC.  I WILL REBUILD IT BUT THE DIRECTIONS DON'T SEEM TO WORK.  I HAVE NOW CREATED TWO NEW FILES AND TUNES WILL NOT BE DRAGGED IN NOR SIT ON THE RIGHT WHILE MY VOLULME OF TUNES LOADS UP TO CHOOSE WHICH TO DRAG.  ALSO, I WONDER HOW I CAN GET RID OF THAT STAR RATING, SEEMS JUVENILE.  I USE GENRE TO PUT THE KEY OF THE TUNE, SURPRISED YOU HAVE NO KEY COLUMN.  SOME OF US UTILIZE THE KEY THAT THE TUNES ARE IN.

Hi Kate,
First, just so you know, all caps is the equivalent of yelling....figured you weren't aware of that.
Display your Sidebar to see your playlists and the music at the same time - click on View in the Menu Bar at the top, and click on Show Sidebar.
No way to get rid of the Star Rating - ignore it. I never even notice it because it it meaningless to me....
As for the Key issue, use one of the other sort columns to assign a Key to your music - click on a song, or select a group of songs (click on first one, then use the Shift Key plus the down arrow to select a consecutive group, or click on a song, then use the Command Key and click to select songs that are not consecutive)
Then, once selected, click on File and Get Info. You will get a message asking if you want to edit information for multiple items - say Yes.
Use the Grouping field to type in your Key. Or you can go to the Video tab and use the Show field. When you are editing multiple items, all of the fields are empty, but many of them are used by the system, so you don't want to randomly select a field to put your own info into . The two I suggested are "user" fields, so they are safe. If you want to see what else if available, select a single song and look at the Get Info tabs. Do that for several so you get a good sense of where the empty fields are.
Once you have assinged the value for your key, click OK.
Then you will want that new criteria to show in your Music window, so click on View and Show View Options, and check the box for the field that you used to assign the Key.
Hope this helps!
Cheers,
GB

Similar Messages

  • I have a Excel file which has lots of PDFs embed as a link.  When i converting to PDF the embed links are not working. Please help to slove this issue.

    I have a Excel file which has lots of PDFs embed as a link.  When i converting to PDF the embed links are not working. Please help to slove this issue.e

    I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

  • On certain sites (like chats), the shift symbols are not working correctly.

    On certain sites (like chats), the shift symbols are not working correctly, but shift+letters works fine. I've tried changing the set keyboard language, as well as the character encoding, but nothing works. I don't have this problem in IE.

    Hello there.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your issue, I'm not sure if this is the case, but there is a little know keyboard shortcut to change the keyboard language on Windows. And it's very annoying, since it's easily triggered. I don't know exactly which one it is, but I think it's CTRL+SHIFT, the ones on the right. I suggest you ask Microsoft for support on this one. Firefox doesn't control keyboard languages.

  • I had to get a new keyboard and now the keys in the upper row are not working appropriately. How can I fix this problem?

    My keyboard stopped working so I went to the apple store to replace it with another one. Now I am back home and the keys at the very top are not working correctly (volumn  F12 shows the dashboard, F11 takes the screen up and away, F8 pause button shows spaces, etc.). What should I do to correct this problem - I assume I probably need to download some type of softwear but what? I have a Mac OS X  Version 10.5.8 desktop - 2.66 GHz Intel Core 2 Duo processor.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • Alerts are not working for Site collections in a content database

    Hi,
    We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
    or changes happen in the list/document library.
    We have tried with Immediate as well as scheduled alerts both are not working.
    FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
    Any help would be appreciated.
    Thanks
    Ramkumar

    Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
    job-immediate-alerts
    job-daily-alerts
    job-weekly-alerts
    Please check this wiki -
    Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Quartz filters are not working (for PDF)

    It seems that quartz filters are not working for me under Mountin Lion. I have tried to export, print, etc everything in Preview, Automator, ColorSync. It simply won't apply the filters to my PDFs.
    Anyone experienced similar issues? Is it a known bug?

    I kinda have the same problem, except its only my custom filters that aren´t working in ColorSynch. The other filters get applied as usual, but I can not change any of the preformed filters within ColorSynch, and the "live update from filter inspector" doesn´t work if I try to apply changes or use my custom filters.
    The custom filters I have, were created prior to my upgrade from snow leopard to moutain lion.
    I´ve understood that there has been multiple problems with the filters in lion ++
    If there isn´t a quick fix to this, does anybody know of any programs I can use to apply filters without having to buy Adobe Pro, my use is not for simply decreasing file size, but mostly for editing colors prior to prinitng. And its  not sufficient to use the preformed filters unfortunately.

  • My ipod 3g hung up in the middle of a song and when i restarted it, the downloaded apps are not working

    my ipod 3g hung up in the middle of a song and when i restarted it, the downloaded apps are not working

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - The remaining items in:
    iOS: Troubleshooting applications purchased from the App Store

  • SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

    H/W: SPA3000
    F/W: 3.1.20(GW)
    Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
    Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
    Dial "17474743246#" which works for gw1.
    Dial "#17474743246" which also works for gw1.
    Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
    It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
    Is there any way to specify Interdigit Short Timer with <:@gw0>?
    BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
    S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
    The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

    IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
    I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • The figure links are not working

    The figure links are not working in the latest ADE 4.0.3. The same ePUB figure links are worked perfectly in ADE 3.0.

    Your navigation is covering some of your links. You should send the image to the back & or crop it to just the red box.
    How I create navigation menus:
    http://jeffnitschke.com/Video.html

  • I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? Thanks

    Question
    I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? Thanks

    Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
    P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that...

  • The internal speakers are not working on my macbook pro

    the internal speakers are not working on my macbook pro

    Are they selected under System Preferences>Sound? Or do you see something such as "Digital Output" listed instead of "Internal Speakers"?
    It may be that your digital out switch is 'stuck.' This usually happens after using headphones and you can usually see a red light coming from the audio out port. You can 'fix' this by plugging and unplugging a headphone jack repeatedly until the switch is reset.
    Clinton

  • Push notifications for the social networking are not working. How to fix it?

    Try to solve the problem of push notifications of social networking apps which are not working on my iphone 4. Fix it please..!

    If you go to settings-->general-->accessibility then scroll down you'll see "increase contrast." Turn that off and your control center and notification center should become more transparent. I had the same problem and that's how I fixed it! Hope it works :)

  • The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

    Hi everyone.
    I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf ,  (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
    I follow the instructions of that document carefully:
    I go to: PeopleTools -> Web Profile -> Web Profile Configuration
        2. Then I choose the Web Profile: "Development".
        3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to  the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
        4. Stop the Web Domain and Clear cache.
        5. Start the Web Domain again.
    After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
    I tried many combinations with the ctx parameters URL but it does not work yet. 
    I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
    According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter,  Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
    Thanks for you help and feedback.

    2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
    The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
    Also, you can use multiple ctx parameters:
    E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
    This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

  • Time series functions are not working for fragmented logical table sources?

    If i remove that fragmented logical table sources, then its working fine.
    if any body know the reason, please let me know.
    thanks and regards,
    krishna

    Hi,
    is because the time series function are not supported for the framentation content, see the content of the oracle support:
    The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
    Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
    Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
    Regards,
    Gianluca

Maybe you are looking for

  • My Macbook doesn't recognise the startup disk

    I started having problems with Yosemite and lion (installed in the same hard drive, different partitions) so i erase all and instal mavericks, the macbook is late 2009 stock but i don't have startup disk, when i install mavericks it tells me that won

  • Import COM.dll in java source?

    Is there a way to import a DLL from a COM-object into java source code? And if so, how does it work?

  • Disappearing mouse pointer

    What's wrong? My mouse pointer hides from me.

  • Is this the best it can do?

    I just burned out a 12 minute movie thru IDVD and got 14 flash frames, either white, or where a photo from elsewhere pops up for a moment. I burned an IPhoto slideshow to a Quick Time Movie, then put that into an IDVD project at Professional Quality.

  • P6.2.1 upgrade to P6.7.0 database version miss match

    Hello, I was using Primavera 6.21 and i made an upgrade to Primavera 6.7.0 When i run my PMDB data base the following message pops: The application and database versions do not match. Click Exit to close the application. Primavera P6 7.0.0 Expected d