The primary key for field could not be filled.

Greetings ALL !!
We are trying to uplaod data to LSUPPLIER from R/3,we noticed that one piece of code was not working fine and had edited the code and replicated the Datsasource in BI.When I trigger the load Via UI I get the data to PSA succefully but when the program runs to write the data to the infoobject Supplier I encounter the above status in UI.I tried deleteing the Master data completly from the table of the infoobjects but nothign is achived.
Can someone please suggest what can be the issue?
Surbhi

HI Divyesh
The DS is Lsupplier only and not SUpplier
Surbhi

Similar Messages

The attibutes SID table(s) could not be filled

Hi,
I have a problem during the transport of an infoobject with master data. There are some fields time dependent and some other not. The transport goes in error with the following message:
"The attibutes SID table(s) could not be filled"
I tried to reactivate the infoobject but nothing changes.
Any ideas?
Thanks,
Gianluca

I have again this error. I have an inconsistent master data in quality environment (the 2 SID tables P and Q are empty). When I transport the infoobject in quality without modifications, transport is ok. When I add a NAVIGABLE attribute, the transport goes in error and the message:
"The attibutes SID table(s) could not be filled"
is shown. Does anyone know if there exist a method for regenerate the sid tables? (I mean the values contained in the sid tables).
Or I am obligate to delete the master data values?
Thanks!

Unable to Install FP13, IE11, W7. The notice "The Activex Control for FP could not be registered"

Please Help

Use the MSI installer: http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_ 13_active_x.msi
It cures this.

The attributes SID table(s) could not be filled

I am trying to change an attribute to a navigational attribute for 0MAT_PLANT and I am receiving this error upon activation. I have tried the following:
1) Deleting Master Data and reactivating
2) Program RSDMD_CHECKPRG_ALL
3) Activating in the background
4) Fill Attribute SID Table
When I try to fill the attribute SID table, I get a SQL error.
SQL Error: "/BI03503" in R3DBWDATA type *FILE not found. MSGI D= Job=753132/DBW00/WP14
Can someone tell me how to correct this error?

Likely there was data in these tables, and DB system can't adjust the table with changes you have done.
If you can, try dropping all master data for the IOBJ and then reactivate.
If this doesn't work or is not feasible, identify which table is having this issue (/BIxxxx), display it in SE11, go to utilities-->Database object --> Database utility; on the next screen try to do a Activate and Adjust Database (first with save data, and if unsuccessful then with Delete data option).

Rebuilding the Primary Key Index for an IOT

Good afternoon everyone
I am having some difficulty rebuilding an IOT. Specifically, I am trying to move the IOT from one tablespace to another. From DBA_SEGMENTS, it appears the primary Key for the IOT is what needs to be rebuilt. When I query DBA_TABLES, it shows the same name as the Index that I need to build. When I attempt to move the table to another tablespace, I get INVALID OPTION on the Alter table.
ALTER TABLE <owner>.<table name> MOVE TABLESPACE <new tablespace name>;
I have also tried
ALTER INDEX <owner>.<index name> REBUILD TABLEAPCE <new tablespace name>;
Can someone point me in the right direction as the SQL documentation is not as good as I thought for this.

OK. Here are the three tables in question. I think the problem with these three tables is they have user-defined data types, essentially nullifying the use of ONLINE for the move option. I'm thinking I will have to export, create the table and then import.
If anyone has any other options, i'm open do a conversation.
OWNER TABLE_NAME IOT_NAME TABLESPACE_NAME
NGDEV_SOAINFRA SYS_IOT_OVER_76044 AQ$_IP_QTAB_G NGDEV_SOAINFRA
NGDEV_SOAINFRA SYS_IOT_OVER_76119 AQ$_EDN_EVENT_QUEUE_TABLE_G NGDEV_SOAINFRA
NGDEV_SOAINFRA SYS_IOT_OVER_76148 AQ$_EDN_OAOO_DELIVERY_TABLE_G NGDEV_SOAINFRA
3 rows selected.
CMPW_DBA:orcl> alter table ngdev_soainfra.aq$_ip_qtab_g move tablespace soa_suite_data_01 overflow tablespace soa_suite_data_01;
alter table ngdev_soainfra.aq$_ip_qtab_g move tablespace soa_suite_data_01 overflow tablespace soa_suite_data_01
ERROR at line 1:
ORA-24005: Inappropriate utilities used to perform DDL on AQ table NGDEV_SOAINFRA.AQ$_IP_QTAB_G
Elapsed: 00:00:00.03
CMPW_DBA:orcl> alter table ngdev_soainfra.aq$_ip_qtab_g move online tablespace soa_suite_data_01 overflow tablespace soa_suite_data_
01;
alter table ngdev_soainfra.aq$_ip_qtab_g move online tablespace soa_suite_data_01 overflow tablespace soa_suite_data_01
ERROR at line 1:
ORA-24005: Inappropriate utilities used to perform DDL on AQ table NGDEV_SOAINFRA.AQ$_IP_QTAB_G

Database Copy can't copy primary key for tables

When I use Tools->Database Copy Wizard to copy my existing schema (for example: azteca_KSMMS) to a brand new schema (azteca), I find the primary key for some of the tables can't be copied, also the views seem not valid under the new schema (azteca). Please give me your comments about that. Thanks for your help.
Kevin

For example I have a table called workorder, it has a primary key with name (CW_PKEY_519, on WORKORDERID column) from the source schema (azteca_KSMMS). After I database copy to new schema azteca, the primary key lost. The data of workorder and other indexes have been copied to azteca schema.
Kevin

EM Jobs Service is down (fatal). Reason - "Reason for delay could not be determined"

Hi all -
I'm having a problem with my em jobs service. It's listed as down. Severity is "Fatal". For the incident creation DATE it has the following:
"Reason for delay could not be established."
Note that it's the DATE column where it ways that the reason could not be established. Under "message" it has Dec 28, 2013 8:46:29 PM.
Target Name
Target Type
Severity
Message
Incident Creation Date
Incident Last updated Date
Escalation Level
EM Jobs Service
EM Service
Dec 28, 2013 8:46:29 PM
Reason for delay could not be established.
Jan 27, 2014 7:48:44 PM
None
Does anyone have any clue as to why this is happening and/or how to fix it?
Thanks,
Tom

Hi,
Follow the below steps
1. Click on Repository Database Target in Cloud Control
2. Navigate to : Administration -> "Oracle Scheduler" -> Home -> click on "Oracle Scheduler" it will return, "Scheduler Jobs"
3. Check that the scheduled jobs are running at their correct schedules. Check if the "EM_JOBS_STEP_SCHED" job is disabled.
4. Select "EM_JOBS_STEP_SCHED" and click on "Edit job Definition" ensure that the job status is "enabled". Then click apply.
5. Check the "EM Jobs Service" status , it should now be shown as UP.
Also
1. Login to 12c Console, Targets --> All Targets --> EM Jobs Service
2, click on Monitoring Configuration tab
3. click on System Configuration
In the Availability Definition screen, under Key Component column, check all the check boxes
4. Similarly, in the System Configuration screen, under Key Component column, check all the check boxes
Wait for 5 minutes and then check the status of the target again.
Regards,
Rahul

Primary Key for DSO (2LIS_11_VAKON)

Dear all:
I have to create a Standard DSO out of 2LIS_11_VAKON Datasource. My question is how do I define the Primary Key for this DSO...
I mean: (Doc.Number + Pos.Number) is enough?. or do I need some extra(s) field(s) in the Primary Key?
Regards.

Hi
I have to create a Standard DSO out of 2LIS_11_VAKON Datasource. My question is how do I define the Primary Key for this DSO...
I mean: (Doc.Number + Pos.Number) is enough?. or do I need some extra(s) field(s) in the Primary Key?
You can Install the Standard content You cannot Create any Standard DSO.
You can Create a customized DSO . Though the DSO is a Table There is no need of Primery Key Function here. Hope You are Talking about Data Fields and Key Fields.
But there is a Standard DSO FOR 0SD_O05 Order: Condition Data.. you can install the same.
Both fields are needed to report analytical data based on your criteria.
http://help.sap.com/saphelp_nw70/helpdata/EN/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm

Primary Key for a view?

Hi everybody,
I am wondering if there is such thing as primary key for a view? Assuming, that my view is based on a single table and it's just a subset of columns (some of them renamed) including PK of the table it's based on.
The reason for my question is this - we're using Reverse POCO generator which automatically generates C# Model class and Configuration file for our tables and views. For the view is lists all the columns as a key and therefore I obviously can not use normal
way of updating that view. I posted that as an issue here https://efreversepoco.codeplex.com/workitem/115 but I am thinking there is no such thing as the "primary key" for a view.
The query used to generate the classes is extremely complex already but may be it can be modified to get the PK ?
SELECT [Extent1].[SchemaName],
[Extent1].[Name] AS TableName,
[Extent1].[TABLE_TYPE] AS TableType,
[UnionAll1].[Ordinal],
[UnionAll1].[Name] AS ColumnName,
[UnionAll1].[IsNullable],
[UnionAll1].[TypeName],
ISNULL([UnionAll1].[MaxLength],0) AS MaxLength,
ISNULL([UnionAll1].[Precision], 0) AS Precision,
ISNULL([UnionAll1].[Default], '') AS [Default],
ISNULL([UnionAll1].[DateTimePrecision], '') AS [DateTimePrecision],
ISNULL([UnionAll1].[Scale], 0) AS Scale,
[UnionAll1].[IsIdentity],
[UnionAll1].[IsStoreGenerated],
CASE WHEN ([Project5].[C2] IS NULL) THEN CAST(0 AS BIT)
ELSE [Project5].[C2]
END AS PrimaryKey
FROM (
SELECT QUOTENAME(TABLE_SCHEMA) + QUOTENAME(TABLE_NAME) [Id],
TABLE_SCHEMA [SchemaName],
TABLE_NAME [Name],
TABLE_TYPE
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE IN ('BASE TABLE', 'VIEW')
) AS [Extent1]
INNER JOIN (
SELECT [Extent2].[Id] AS [Id],
[Extent2].[Name] AS [Name],
[Extent2].[Ordinal] AS [Ordinal],
[Extent2].[IsNullable] AS [IsNullable],
[Extent2].[TypeName] AS [TypeName],
[Extent2].[MaxLength] AS [MaxLength],
[Extent2].[Precision] AS [Precision],
[Extent2].[Default],
[Extent2].[DateTimePrecision] AS [DateTimePrecision],
[Extent2].[Scale] AS [Scale],
[Extent2].[IsIdentity] AS [IsIdentity],
[Extent2].[IsStoreGenerated] AS [IsStoreGenerated],
0 AS [C1],
[Extent2].[ParentId] AS [ParentId]
FROM (
SELECT QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) + QUOTENAME(c.COLUMN_NAME) [Id],
QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) [ParentId],
c.COLUMN_NAME [Name],
c.ORDINAL_POSITION [Ordinal],
CAST(CASE c.IS_NULLABLE
WHEN 'YES' THEN 1
WHEN 'NO' THEN 0
ELSE 0
END AS BIT) [IsNullable],
CASE WHEN c.DATA_TYPE IN ('varchar', 'nvarchar', 'varbinary')
AND c.CHARACTER_MAXIMUM_LENGTH = -1 THEN c.DATA_TYPE + '(max)'
ELSE c.DATA_TYPE
END AS [TypeName],
c.CHARACTER_MAXIMUM_LENGTH [MaxLength],
CAST(c.NUMERIC_PRECISION AS INTEGER) [Precision],
CAST(c.DATETIME_PRECISION AS INTEGER) [DateTimePrecision],
CAST(c.NUMERIC_SCALE AS INTEGER) [Scale],
c.COLLATION_CATALOG [CollationCatalog],
c.COLLATION_SCHEMA [CollationSchema],
c.COLLATION_NAME [CollationName],
c.CHARACTER_SET_CATALOG [CharacterSetCatalog],
c.CHARACTER_SET_SCHEMA [CharacterSetSchema],
c.CHARACTER_SET_NAME [CharacterSetName],
CAST(0 AS BIT) AS [IsMultiSet],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)), c.COLUMN_NAME, 'IsIdentity') AS BIT) AS [IsIdentity],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)), c.COLUMN_NAME, 'IsComputed')
| CASE WHEN c.DATA_TYPE = 'timestamp' THEN 1
ELSE 0
END AS BIT) AS [IsStoreGenerated],
c.COLUMN_DEFAULT AS [Default]
FROM INFORMATION_SCHEMA.COLUMNS c
INNER JOIN INFORMATION_SCHEMA.TABLES t
ON c.TABLE_CATALOG = t.TABLE_CATALOG
AND c.TABLE_SCHEMA = t.TABLE_SCHEMA
AND c.TABLE_NAME = t.TABLE_NAME
AND t.TABLE_TYPE IN ('BASE TABLE', 'VIEW')
) AS [Extent2]
UNION ALL
SELECT [Extent3].[Id] AS [Id],
[Extent3].[Name] AS [Name],
[Extent3].[Ordinal] AS [Ordinal],
[Extent3].[IsNullable] AS [IsNullable],
[Extent3].[TypeName] AS [TypeName],
[Extent3].[MaxLength] AS [MaxLength],
[Extent3].[Precision] AS [Precision],
[Extent3].[Default],
[Extent3].[DateTimePrecision] AS [DateTimePrecision],
[Extent3].[Scale] AS [Scale],
[Extent3].[IsIdentity] AS [IsIdentity],
[Extent3].[IsStoreGenerated] AS [IsStoreGenerated],
6 AS [C1],
[Extent3].[ParentId] AS [ParentId]
FROM (
SELECT QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) + QUOTENAME(c.COLUMN_NAME) [Id],
QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) [ParentId],
c.COLUMN_NAME [Name],
c.ORDINAL_POSITION [Ordinal],
CAST(CASE c.IS_NULLABLE
WHEN 'YES' THEN 1
WHEN 'NO' THEN 0
ELSE 0
END AS BIT) [IsNullable],
CASE WHEN c.DATA_TYPE IN ('varchar', 'nvarchar', 'varbinary')
AND c.CHARACTER_MAXIMUM_LENGTH = -1 THEN c.DATA_TYPE + '(max)'
ELSE c.DATA_TYPE
END AS [TypeName],
c.CHARACTER_MAXIMUM_LENGTH [MaxLength],
CAST(c.NUMERIC_PRECISION AS INTEGER) [Precision],
CAST(c.DATETIME_PRECISION AS INTEGER) AS [DateTimePrecision],
CAST(c.NUMERIC_SCALE AS INTEGER) [Scale],
c.COLLATION_CATALOG [CollationCatalog],
c.COLLATION_SCHEMA [CollationSchema],
c.COLLATION_NAME [CollationName],
c.CHARACTER_SET_CATALOG [CharacterSetCatalog],
c.CHARACTER_SET_SCHEMA [CharacterSetSchema],
c.CHARACTER_SET_NAME [CharacterSetName],
CAST(0 AS BIT) AS [IsMultiSet],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)), c.COLUMN_NAME, 'IsIdentity') AS BIT) AS [IsIdentity],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)), c.COLUMN_NAME, 'IsComputed')
| CASE WHEN c.DATA_TYPE = 'timestamp' THEN 1
ELSE 0
END AS BIT) AS [IsStoreGenerated],
c.COLUMN_DEFAULT [Default]
FROM INFORMATION_SCHEMA.COLUMNS c
INNER JOIN INFORMATION_SCHEMA.VIEWS v
ON c.TABLE_CATALOG = v.TABLE_CATALOG
AND c.TABLE_SCHEMA = v.TABLE_SCHEMA
AND c.TABLE_NAME = v.TABLE_NAME
WHERE NOT (
v.TABLE_SCHEMA = 'dbo'
AND v.TABLE_NAME IN ('syssegments', 'sysconstraints')
AND SUBSTRING(CAST(SERVERPROPERTY('productversion') AS VARCHAR(20)), 1, 1) = 8
) AS [Extent3]
) AS [UnionAll1]
ON (0 = [UnionAll1].[C1])
AND ([Extent1].[Id] = [UnionAll1].[ParentId])
LEFT OUTER JOIN (
SELECT [UnionAll2].[Id] AS [C1],
CAST(1 AS BIT) AS [C2]
FROM (
SELECT QUOTENAME(tc.CONSTRAINT_SCHEMA) + QUOTENAME(tc.CONSTRAINT_NAME) [Id],
QUOTENAME(tc.TABLE_SCHEMA) + QUOTENAME(tc.TABLE_NAME) [ParentId],
tc.CONSTRAINT_NAME [Name],
tc.CONSTRAINT_TYPE [ConstraintType],
CAST(CASE tc.IS_DEFERRABLE
WHEN 'NO' THEN 0
ELSE 1
END AS BIT) [IsDeferrable],
CAST(CASE tc.INITIALLY_DEFERRED
WHEN 'NO' THEN 0
ELSE 1
END AS BIT) [IsInitiallyDeferred]
FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS tc
WHERE tc.TABLE_NAME IS NOT NULL
) AS [Extent4]
INNER JOIN (
SELECT 7 AS [C1],
[Extent5].[ConstraintId] AS [ConstraintId],
[Extent6].[Id] AS [Id]
FROM (
SELECT QUOTENAME(CONSTRAINT_SCHEMA) + QUOTENAME(CONSTRAINT_NAME) [ConstraintId],
QUOTENAME(TABLE_SCHEMA) + QUOTENAME(TABLE_NAME) + QUOTENAME(COLUMN_NAME) [ColumnId]
FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE
) AS [Extent5]
INNER JOIN (
SELECT QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) + QUOTENAME(c.COLUMN_NAME) [Id],
QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) [ParentId],
c.COLUMN_NAME [Name],
c.ORDINAL_POSITION [Ordinal],
CAST(CASE c.IS_NULLABLE
WHEN 'YES' THEN 1
WHEN 'NO' THEN 0
ELSE 0
END AS BIT) [IsNullable],
CASE WHEN c.DATA_TYPE IN ('varchar', 'nvarchar', 'varbinary')
AND c.CHARACTER_MAXIMUM_LENGTH = -1 THEN c.DATA_TYPE + '(max)'
ELSE c.DATA_TYPE
END AS [TypeName],
c.CHARACTER_MAXIMUM_LENGTH [MaxLength],
CAST(c.NUMERIC_PRECISION AS INTEGER) [Precision],
CAST(c.DATETIME_PRECISION AS INTEGER) [DateTimePrecision],
CAST(c.NUMERIC_SCALE AS INTEGER) [Scale],
c.COLLATION_CATALOG [CollationCatalog],
c.COLLATION_SCHEMA [CollationSchema],
c.COLLATION_NAME [CollationName],
c.CHARACTER_SET_CATALOG [CharacterSetCatalog],
c.CHARACTER_SET_SCHEMA [CharacterSetSchema],
c.CHARACTER_SET_NAME [CharacterSetName],
CAST(0 AS BIT) AS [IsMultiSet],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)),
c.COLUMN_NAME, 'IsIdentity') AS BIT) AS [IsIdentity],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)),
c.COLUMN_NAME, 'IsComputed')
| CASE WHEN c.DATA_TYPE = 'timestamp' THEN 1
ELSE 0
END AS BIT) AS [IsStoreGenerated],
c.COLUMN_DEFAULT AS [Default]
FROM INFORMATION_SCHEMA.COLUMNS c
INNER JOIN INFORMATION_SCHEMA.TABLES t
ON c.TABLE_CATALOG = t.TABLE_CATALOG
AND c.TABLE_SCHEMA = t.TABLE_SCHEMA
AND c.TABLE_NAME = t.TABLE_NAME
AND t.TABLE_TYPE IN ('BASE TABLE', 'VIEW')
) AS [Extent6]
ON [Extent6].[Id] = [Extent5].[ColumnId]
UNION ALL
SELECT 11 AS [C1],
[Extent7].[ConstraintId] AS [ConstraintId],
[Extent8].[Id] AS [Id]
FROM (
SELECT CAST( NULL AS NVARCHAR (1)) [ConstraintId], CAST( NULL AS NVARCHAR (MAX)) [ColumnId] WHERE 1= 2
) AS [Extent7]
INNER JOIN (
SELECT QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) + QUOTENAME(c.COLUMN_NAME) [Id],
QUOTENAME(c.TABLE_SCHEMA) + QUOTENAME(c.TABLE_NAME) [ParentId],
c.COLUMN_NAME [Name],
c.ORDINAL_POSITION [Ordinal],
CAST(CASE c.IS_NULLABLE
WHEN 'YES' THEN 1
WHEN 'NO' THEN 0
ELSE 0
END AS BIT) [IsNullable],
CASE WHEN c.DATA_TYPE IN ('varchar', 'nvarchar', 'varbinary')
AND c.CHARACTER_MAXIMUM_LENGTH = -1 THEN c.DATA_TYPE + '(max)'
ELSE c.DATA_TYPE
END AS [TypeName],
c.CHARACTER_MAXIMUM_LENGTH [MaxLength],
CAST(c.NUMERIC_PRECISION AS INTEGER) [Precision],
CAST(c.DATETIME_PRECISION AS INTEGER) AS [DateTimePrecision],
CAST(c.NUMERIC_SCALE AS INTEGER) [Scale],
c.COLLATION_CATALOG [CollationCatalog],
c.COLLATION_SCHEMA [CollationSchema],
c.COLLATION_NAME [CollationName],
c.CHARACTER_SET_CATALOG [CharacterSetCatalog],
c.CHARACTER_SET_SCHEMA [CharacterSetSchema],
c.CHARACTER_SET_NAME [CharacterSetName],
CAST(0 AS BIT) AS [IsMultiSet],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)),
c.COLUMN_NAME, 'IsIdentity') AS BIT) AS [IsIdentity],
CAST(COLUMNPROPERTY(OBJECT_ID(QUOTENAME(c.TABLE_SCHEMA) + '.' + QUOTENAME(c.TABLE_NAME)),
c.COLUMN_NAME, 'IsComputed')
| CASE WHEN c.DATA_TYPE = 'timestamp' THEN 1
ELSE 0
END AS BIT) AS [IsStoreGenerated],
c.COLUMN_DEFAULT [Default]
FROM INFORMATION_SCHEMA.COLUMNS c
INNER JOIN INFORMATION_SCHEMA.VIEWS v
ON c.TABLE_CATALOG = v.TABLE_CATALOG
AND c.TABLE_SCHEMA = v.TABLE_SCHEMA
AND c.TABLE_NAME = v.TABLE_NAME
WHERE NOT (
v.TABLE_SCHEMA = 'dbo'
AND v.TABLE_NAME IN ('syssegments', 'sysconstraints')
AND SUBSTRING(CAST(SERVERPROPERTY('productversion') AS VARCHAR(20)), 1, 1) = 8
) AS [Extent8]
ON [Extent8].[Id] = [Extent7].[ColumnId]
) AS [UnionAll2]
ON (7 = [UnionAll2].[C1])
AND ([Extent4].[Id] = [UnionAll2].[ConstraintId])
WHERE [Extent4].[ConstraintType] = N'PRIMARY KEY'
) AS [Project5]
ON [UnionAll1].[Id] = [Project5].[C1]
WHERE NOT ([Extent1].[Name] IN ('EdmMetadata', '__MigrationHistory'));
Thanks in advance.
UPDATE. I made a quick Google search and found this
http://stackoverflow.com/questions/1013333/entity-framework-and-sql-server-view/2715299#2715299
It sounds as an interesting idea to try although I am not sure it will work with POCO Generator. But I'm going to try it now anyway.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

UPDATE. Changing my view to be
USE [SiriusSQL_SysManager]
GO
/****** Object: View [dbo].[SiriusV_SalesPointsLicensesList] Script Date: 4/30/2015 1:28:54 PM ******/
DROP VIEW [dbo].[SiriusV_SalesPointsLicensesList]
GO
/****** Object: View [dbo].[SiriusV_SalesPointsLicensesList] Script Date: 4/30/2015 1:28:54 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create view [dbo].[SiriusV_SalesPointsLicensesList]
as
select ISNULL(salespoint,'') as Salespoint
, CAST(loc_suffix as smallint) as Id
, CAST(descrip as varchar(25)) as [Description]
, cast(mode as tinyint) as Mode
, cast(is_access as bit) as AccessWare
, cast(is_adv_inv as bit) as AdvInventory
, cast(is_cw_crdt as bit) as CardwareCredit
, cast(is_debit as bit) as DebitWare
, cast(is_dir_net as bit) as DirectNet
, cast(is_fbquick as bit) as FBQuickService
, cast(is_fbtable as bit) as FBTableService
, cast(is_grpschd as bit) as ResourceScheduling
, cast(is_guests as bit) as Guests
, cast(is_pass as bit) as PassWare
, cast(is_pms as bit) as PMSInterface
, cast(is_rental as bit) as RentWare
, cast(is_dual as bit) as DualBook
, cast(is_pod as bit) as PodBook
, cast(is_private as bit) as PrivateBook
, cast(is_resrv as bit) as Reservations
, cast(is_teesht as bit) as TeeSheet
, cast(is_rungk as bit) as RunGKInSales
, cast(is_resseat as bit) as ReservedSeating
, cast(is_kcashls as bit) as KioskCashless
, cast(is_ksales as bit) as KioskSales
, cast(is_kwilcal as bit) as KioskWillCall
, cast(is_payplan as bit) as PaymentPlan
, cast(is_test as bit) as Test
from dbo.sales_pt
where hidden = 0 ;
GO
worked!!! I now have just salespoint as the Key.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to get the Primary key from Synonym

Hi ,
I want to get the Primary Keys for my tables . I used
java.sql.DatabaseMetaData databasemetadata = connection.getMetaData();
    ResultSet rs = databasemetadata.getTables(null, null, "%", null);
rs.next();
    System.out.println(" TABLE_CAT "+ rs.getString(1));
    System.out.println(" TABLE_SCHEM "+rs.getString(2));
    System.out.println(" TABLE_NAME "+rs.getString(3));
    System.out.println(" TABLE_TYPE "+rs.getString(4));
    System.out.println(" REMARKS "+rs.getString(5)); gives :
TABLE_CAT null
TABLE_SCHEM PROGRESS
TABLE_NAME ApplicConv
TABLE_TYPE SYNONYM
REMARKS null
Now if I use :
rs = databasemetadata.getPrimaryKeys(null,"PROGRESS","Applicconv");
System.out.println("Is result set Non empty "+rs.next()); gives :
Is ResultSet non empty false .
Can you tell me why this result is empty? Is it because of my table is a Synonym?
If it is Synonym how to get the primary key ?

You can use DatabaseMetaData#getPrimaryKeys.

I cannot install Flashplayer 10.2.152.32. I get the message that :The Active X for Flashplayer could

I cannot install Flashplayer 10.2.152.32. I get the message that :The Active X for Flashplayer could not be registered. The problem started when I "stupidly" accepted the upgrade on Feb 18, 2011. It has not worked since. I have tried every suggestion including all the older suggestions on this community forum, without success. I am using ie8 xp2002 sp3. I am almost going to give up. Please help.

Hi Lee,
"You’re probably thinking this sounds like an administrator issue. However, I’m the only user and Windows 7 is registered to me – which should make me the only administrator."
You are correct but to a point. I thought so too, however, like you, I am "second in command"...under myself.
I was in the same situation and tried others' successful workarounds. Nope. Actually, an ongoing frustration for a few months to no avail...until I came across this link, http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ this-installation-package-could-not-be-opened/40c3cf33-b155-4dc7-b21e-ca5acce105 f3. It shows you how to access the Administrator login, literally. It worked for me.
This is from a Microsoft support page (SJ has probably been alerted, so I don't have much time, LOL). I did not want to hit that "final" option and reinstall Win 7. The first time was trying enough and I was about to give in.
" I’ve scanned a Microsoft forum for iTunes download/installation problems. Most answers on the forum refer to a system32 error appearing when they attempt to install itunes64bit.exe on Vista or Windows 7."
I was opposite on this one. What led me to think it wasn't the above was seeing this user " ` " , also known as Accent grave. The Users first file is labeled " ` " and has a little gold lock on it. When I scanned Task Manager, under Processes Tab, the User Name column showed " ` " attached to certain processes. I knew it was me, but did not realize it was the Alpha me
I cannot say if the system automatically did this or I or Alpha (I'm blaming Alpha). If there is a way to change this I do not know, and if I should. Either way, I will do some more research and pray another personality isn't isn't lurking about
Hope this helps you.
Ss

How to create entity for the table which is not having the primary key

Hi,
Is it possible to create an entity for the table which is not having the primary key.
I have to write a method in my session bean and that method must use this entity.
any websites for this.

If you are talking about processes launched from a JVM (running outside), Process is available.
If you are talking about processes already running outside of a JVM, you could roll-your-own class to provide similar functionality as Process. This approach would be platform dependent, backed by the platform's I/O scripting and therefore limited to what the platform supports for process manipulation, e.g. Linux/Unix capabilities far exceed Windows.

Exception: non-read-only mapping defined for the primary key field

Hello.
I'm new to Oracle and I created Java EE Web Project.
And I created entities from tableA, tableB, tableC from my database.
tableA has foreign key to tableB and has unidirectional Many-to-One relationship. tableC has two primary keys and one of these is foreign key to primary key in tableA. tableC also has unidirection Many-to-One relationship to tableA.
Then I created session bean and data control from it, in design window, created read-only table from tableA.
And I selected columns in tableA and also in tableB.
I ran the application and saw the following exception in log window.
Local Exception Stack:
Exception [EclipseLink-46] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.DescriptorException
Exception Description: There should be one non-read-only mapping defined for the primary key field [tableC.tableA_ID].
Descriptor: RelationalDescriptor(mypack.tableC --> [DatabaseTable(tableC)])
tableA_ID is a primary key in tableA.
How can I solve this error?
Please help me.
Edited by: 900471 on 2011. 12. 3 오전 5:32
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:34

There are not enough details to be sure since you have not provided the mappings. From just the error, it looks like you are using the tableC.tableA_ID field as the foreign key in the ManyToOne relationship to A, but have marked it as insertable=false, writeable=false, meaning that it cannot be updated or used for inserts.
Either make it writable (set the settings to true), or add another basic mapping/attribute in the entity for TableC that maps to the field which you can use to set when you insert a new tableC entity. A simple example is available at
http://wiki.eclipse.org/EclipseLink/Examples/JPA/2.0/DerivedIdentifiers
Best Regards,
Chris

Am not getting the primary key of the enity but the value 0 for first eleme

Hi everyone , I have used the primary key of an entity to create a selectonechoice in my page. But when I select from the combo box am gettting the value of the first element as 0 second as 1....
How to I get the value of the primary key itself...
Thanks you for your kind cooperation .
Regards
Lutchumaya

Hi,
0 is the index of the value in the selectOne Choice
See
http://groundside.com/blog/DuncanMills.php?title=adf_the_list_binding_value_problem&more=1&c=1&tb=1&pb=1
for how to retrieve the actual value
Frank

How can I obtain the primary key of a table for an entity relation?

hello everybody
I am doing a consultation to a table in my data base, good this table has alone two fields, the first one is the code or pk and the second one is the description, to be presisos they are names of city and code.
From the beginning!!: This method this one in another class that is a Dialog that is going to call to the class SelecPlace ();
SelecPlace sl = new SelecPlace();
public void capturarLugar(){ // Simple void method in the mentioned class
        String place = txtProcedencia.getText() ; // a JTextField
        sl.executeStatement(place) ;
    }ok, now we see part of the code of the class SelectPlace
public class SelecPlace extends AbstractTableModel{
    Connection con = null;
    Statement sentencia = null ;
    ResultSet rs = null;
    ResultSetMetaData rsmd = null ;
    String[] nameColum = {} ;
    Vector datos = new Vector() ;
    public SelecPlace() { }
    public void executeStatement(String query){
      try{
         con = DBManager.getConnection() ;
         sentencia = con.createStatement(rs.TYPE_SCROLL_INSENSITIVE,
                                                                      rs.CONCUR_UPDATABLE) ;
         String sql = "select * from Place where descripcion like %"+query+"%'";
          rs = sentencia.executeQuery(sql) ;
          rsmd = rs.getMetaData();
          int nroColumnas = rsmd.getColumnCount() ;
          nameColum = new String[nroColumnas] ;
          //obtengo los nombres de columnas en cache
           for(int colum = 0; colum < nroColumnas; columna++){
                nameColum[colum] = rsmd.getColumnLabel(columna + 1) ;
           datos = new Vector();
            while(rs.next()){
                Vector newRow = new Vector();
                for(int i = 0; i < getColumnCount(); i++){
                newRow.addElement(rs.getObject("place_ID"));
                newRow.addElement(rs.getObject("description"));
                datos.addElement(nuevaFila);
            fireTableChanged(null);
        }catch(SQLException e){
            System.err.println(e);
            e.printStackTrace(System.err);
            System.out.println("error in statement");
        }catch(ClassNotFoundException cnfe){
            System.err.println(cnfe);
    }Ok, this code me works and I obtain in this case the field description of the table Place
Now my question is, how can I obtain the primary field of my table?
I need this value of this field that in the base of information in a bigint, and to take it to the first class before mentioned, for that I am working with a data base related

Certain duffymo and everyone!!, good I give you my scheme:
And generalizing my question, I want to obtain the value of the primary key of a table in the database, I obtain more values of the same row, but I need the primary key, and you see one with the primary key I want to turn a Long and it to insert with code java in foreign clave in another table of the database
Good of this form I believe that it would not be breaking the integrity relacional of the tables

The primary key for field could not be filled.

Similar Messages

Maybe you are looking for