The Problem is about Standard Back Button Function in the Report Program.

The Problem is about Standard Back Button Function in the Report Program.
In the Report,First call screen Then Using "write" output some information,That is ok. but In the GUI When I press back button that is standard button,it exit screen to program.
My question is how can i do When i press back button,the screen can be back forward first screen instand of exit screen to program. Thanks .

Hi,
You can define your own PF-STATUS and in that assign the function code for BACK button anything except 'BACK'.
The code would somewhat look like this:
SET PF-STATUS 'TEST'.
write : itab-col1,
itab-col2.
in the PF-STATUS 'TEST', assign the function code to BACK button as 'BCK'.
Now in your program you can use the event AT USER-COMMAND.
In this you can handle the functionality of BACK button.
Hope this helps.
Regards,
Himanshu

Similar Messages

The Problem is about Standard Back Button Function in Report Program

The Problem is about Standard Back Button Function in the Report Program.
In the Report,First call screen Then Using "write" output some information,That is ok. but In the GUI When I press back button that is standard button,it exit screen to program.
My question is how can i do When i press back button,the screen can be back forward first screen instand of exit screen to program. Thanks .

This problem is solution.I call screen using T-code and submit report In PAI,at last return to PAI.That is OK.

Re: [iPlanet-JATO] Back Button functionality

Hi Mike,
Our test environment does not include proxy server.
regards,
syam.
Please respond to [email protected]
cc:
Subject: Re: [iPlanet-JATO] Back Button functionality
Guys,
Please clarify something for me, the JATO code is commented as follows
protected void addResponseHeaders(RequestContext requestContext)
// These values should make any proxy between the client and
// server avoid caching, and ensure that pages from one user
// can never be seen by another user (if they're cached anyway)
requestContext.getResponse().addHeader("Pragma","no-cache");
requestContext.getResponse().addHeader
("Cache-Control","private");Yet you make no mention of whether your test environment includes a Proxy
Server, or does your browser
go directly to the Application Server's web server?
Can you clarify, please?
----- Original Message -----
From: <syam_reddy@p...>
Sent: Wednesday, April 25, 2001 2:59 PM
Subject: [iPlanet-JATO] Back Button functionality
>
Hi,
We observed the following difference in behaviour between JATO pages
and NetD served pages.
We have the following scenario. User will login to the
site. After login he will get a frame set. This frame set has threeframes.
Top and bottom frames are used for navigation (to switch between various
sections on the site.) .The middle frame(main frame) shows the actual
content. When the the frame set gets loaded main frame shows page1. User
will click on a link on page1. Page 2 will be loaded in main frame. Atthis
point if the user clicks on back button , with migrated application(JATO
pages) the following message appears in the main frame.
In Netscape Communicator 4.61 the following message appears in the main
frame :
Data Missing
This document resulted from a POST operation and has expired fromcache.If
you wish you can repost the form data to recreate the document by
presenting the reload button.
In IE 4.72/5.5 the following message appears in the main frame:
Warning : Page has Expired
The page you requested was created using information you submitted in a
form.This page is no longer available.As a security precaution, Internet
Explorer does not automatically resubmit your information for you. To
resubmit your information and view the web page click teh refresh button.
However, in the NetD site page1 will appear in main frame.
How do we mimic the NetD behaviour with the migrated
applications ?
We think the above behaviour with migrated Apps, is due to the
headers that are get set in Application ServletBase , see the following
code snippet :
protected void addResponseHeaders(RequestContext requestContext)
// These values should make any proxy between the client and
// server avoid caching, and ensure that pages from one user
// can never be seen by another user (if they're cached anyway)
requestContext.getResponse().addHeader("Pragma","no-cache");
requestContext.getResponse().addHeader
("Cache-Control","private");
If we comment the above code , we were able to mimic theNetD
behaviour. Are there any alternatives/thoughts on how to mimic the NetD
behaviour ?
Thanks in Advance,
syam&ravi.
[email protected]
[email protected]

OK, here's what I'm trying to do: We have, like you said, a menu
page. The pages that it goes to and the number of links are all
variable and read from the database. In NetD we were able to create
URLs in the form
pgXYZ?SPIDERSESSION=abcd
so this is what I'm trying to replicate here. So the URL that works
is
pgContactUs?GXHC_GX_jst=fc7b7e61662d6164&GXHC_gx_session_id_=cc9c6dfa5
601afa7
which I interpreted to be the equivalent of the old Netd way. Our
javascript also loads other frames of the page in the same manner.
And I believe the URL-rewritten frame sources of a frameset look like
this too.
This all worked except for the timeout problem. In theory we could
rewrite all URLs to go to a handler, but that would be...
inconvenient.

URGENT!!!!! Back Button functionality

Hi folks,
I have to implement the back button functionality in swing.I have currently 4-5 screens and i navigate through them. I have to add back button on each screen. And if it is pressed user should go to previous screen and also previous screen status should be retain.I mean the fields should be populated.
I would really appreciate if anyone can help me in this.It would be of great help anyone have code snippet.
Thanking you in advance...Its URGENT guys...
Regards
ashish

You can use Card Layout for this.

Standard BACK button

Hi all,
In IC_AGENT the standard BACK button is not working. in first screen after searching Business partner, if i go to second screen the standard "BACK" button is not filling in "BSPWD_BASICS". can any one help me how to activate standard back button.

Hi,
Check these threads it would be helpful,
"Back"-Button History in Z*Window
navigating back
How to simulate the history back/forward button (top-right) in a view
Transaction launcher: open URL in new window
Regards,
Shobhit

Getting the variant name when the report program is run in background

Hi All,
How to get the variant name for the report program when run in background? My requirement is to create an email attachement with the name 'variant.XLS', where variant = selection screen variant, when the report program is run in background. The system field SY-SLSET holds the variant name only when run online.
Any pointers to this will be highly appreciated.
Thanks and regards,
Nilesh.

Hello Nilesh,
Please find the algo:
1. Call the FM: GET_JOB_RUNTIME_INFO to get the background job details.
2. Select data from TBTCP using these details:
DATA:
FP_EVENTID   TYPE BTCEVENTID
FP_EVTPARM   TYPE BTCEVTPARM
FP_ACTIVE    TYPE BTCXPGFLAG
FP_JOBCNT    TYPE BTCJOBCNT
FP_JOBNM     TYPE BTCJOB
FP_STEPCNT   TYPE BTCSTEPCNT.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
    IMPORTING
      EVENTID                 = FP_EVENTID
      EVENTPARM               = FP_EVTPARM
      EXTERNAL_PROGRAM_ACTIVE = FP_ACTIVE
      JOBCOUNT                = FP_JOBCNT
      JOBNAME                 = FP_JOBNM
      STEPCOUNT               = FP_STEPCNT
    EXCEPTIONS
      NO_RUNTIME_INFO         = 1
      OTHERS                  = 2.
IF SY-SUBRC <> 0.
*   Error calling FM: GET_JOB_RUNTIME_INFO
ENDIF.
DATA: FP_VARIANT TYPE BTCVARIANT.
SELECT JOBNAME JOBCOUNT STEPCOUNT VARIANT
FROM   TBTCP
INTO TABLE L_IT_TBTCP
WHERE JOBNAME   = FP_JOBNM
AND    JOBCOUNT = FP_JOBCNT
AND    STEPCOUNT = FP_STEPCNT.
IF SY-SUBRC = 0.
    SORT L_IT_TBTCP BY JOBNM JOBCNT STEPCNT.
    READ TABLE L_IT_TBTCP INTO L_WA_TBTCP INDEX 1.
    IF SY-SUBRC = 0.
      FP_VARIANT = L_WA_TBTCP-VARIANT.
    ENDIF.
ENDIF.
Hope this helps.
BR,
Suhas

Vaue of sy-tcode when executing the report program in the background

Hello All,
To test and find out the value of sy-tcode when the report program is exectued in the background. I have done the below steps.
1. created a report program with the code given below.
Select option was just defiend to get the selection screen. it is of no use.
Select-options: s_name for sy-uname.
Write:/ sy-uname,sy-tcode.
2. then I created a transaction for the program to identify whether the value of sy-tcode explicitly.
3. Then I launched the transaction and in the selection screen of the program I selected the option of executing the program in the backgroung and i process the job immediately.
4 . In the spool I am able to see the correct sy-uname value but not the sy-tcode.
Where as if i am executing it in the foregroung it is giving the correct value of sy-uname and sy-tcode.
Can anybody provide me the reason as to why this is happening . that is in the backgound mode the value of sy-tcode is getting cleared.
Thanks,
Mohit

Hello,
As they say it is an SAP standard behavior, you can "hardcode" the transaction itself into the ABAP code...
ie:
if sy-batch eq 'X' "->IT MEANS THAT IT IS A BACKGROUND JOB.
w_tcode = 'Z*****'.
else.
endif.
bYE!!
Gabriel P.-

Triggering smartform output from the report program

Hi,
I have developed a new report program.The selection screen of the report program is like this.
plant:    ________
warehouse: ___________
sheet #:      _________ to _________
bay/bin:      ___________ to __________
building:     ___________ to __________
counter sheet printer: __________
Auditor sheet printer:   _________
When the data for sheet#,bay,building, counter sheet printer is given,then the counter sheet smartform has to be output on the screen.
or
When the data for sheet#,bay,building, auditor sheet printer is given,then the auditor sheet smartform has to be output on the screen.
Is it pessible to trigger the smartform from the selection screen of the report.If so can anyone send me a sample code for that.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = <smartform name>
    IMPORTING
      fm_name            = v_form_fm
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
Call Smartfrom to print the document
CALL FUNCTION v_form_fm
    EXPORTING
      p_compensation   = p_comp <--parameter list
      p_skill          =         p_skill
      p_deci_auhtority = p_da
    TABLES
      s_job            = s_job         <--select option list
      s_level          = s_level
      s_date           = s_date
        EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
declare the paramters of your selection screen in the form interface section of the smartform.
If you have a parameter in teh selection screen then declare it in the smartform as:
P_matnr     TYPE     matnr (in form interface -
                                                 >import)
If you have a select option then
S_LEVEL     LIKE <dictionary structure like a range>
this u declare it in the tables section of the form interface. For the select option , the dictionary sructures should be like a range (see RNGE_OBJID as an example). If you dont have a dictionary structure
then u need to declare it in the dictionary.
REWARD IF HELPFUL

Getting data from table control to the report program.

Hi,
I created a table control using report program and i am trying to enter data in the table control which i want to update in the DB table. How can i get the data entered in table control to the report program, so that i can update the DB table.
Please help me finding out which variable will hold the data entered in table control(dynamically).

hi,
in your table control you give some name to that table control say it_cntrl.
this only serves as the internal table to process the table control data.
like u can write like this.
loop at it_cntrl into wa_cntrl. "wa_cntrl is work area of type it_cntrl table type
......... "do your functining
end loop.
any clarification get in touch
thnks

Get the texts written in the report program

Hi
Is there any way(any table /FM) to get the texts written in the report program .

Hi
check this code...
DATA: itab TYPE string WITH HEADER LINE.
PARAMETERS: tcode TYPE tstc-tcode.
PARAMETERS: prog TYPE rs38m-programm.
IF tcode IS NOT INITIAL.
SELECT SINGLE pgmna FROM tstc INTO prog WHERE tcode = tcode.
ENDIF.
READ REPORT prog INTO itab.
INSERT REPORT 'YDEV_TEST' FROM itab.
GENERATE REPORT 'YDEV_TEST'.
SUBMIT ydev_test VIA SELECTION-SCREEN.
DELETE REPORT 'YDEV_TEST'.

ALV problems, trying to click Back button, Filtering, download (Excel)

Hi
When I try to click Back button, Filtering or download (Excel) on ALV grid this dumps appear:
Runtime Error          MOVE_TO_LIT_NOTALLOWED_NODATA
Error analysis
    The program tried to assign a new value to the field "<L_BOX>" even though
    it is protected against changes.
    The following objects are protected:
    - Character or numeric literals
    - Constants (CONSTANTS)
    - Parameters of the category IMPORTING REFERENCE for functions
      and methods
    - Untyped field symbols to which a field has not yet been assigned
      using ASSIGN
    - TABLES parameters if the corresponding actual parameter is protected
      against changes
    - USING reference parameters and CHANGING parameters for FORMs if
      the actual parameter for this is protected against changes
    - Field symbols if the field assigned using ASSIGN or ASSIGNING
      is protected against changes
    - External write accesses to READ-ONLY attributes
    - Key components of lines in internal tables of the type HASHED or
      SORTED TABLE
      SORTED TABLE.
Line SourceCde
681 * set/unset <box> of all items
682     if l_ucomm eq '&SAL' or l_ucomm eq '&ALL'.
683       if l_ucomm eq '&SAL'.
684         loop at t_outtab.
685           l_tabix = l_tabix + 1.
->>>           <l_box> = ' '.
687           modify t_outtab index l_tabix.
688         endloop.
689       endif.
690       if l_ucomm eq '&ALL'.
691         loop at t_outtab.
692           l_tabix = l_tabix + 1.
693           <l_box> = 'X'.
694           modify t_outtab index l_tabix.
695         endloop.
696       endif.
What I must check on my ALV settings:
ch_alv_layout-zebra          = 'X'.
ch_alv_layout-box_fieldname = 'SELE'.
ch_alv_layout-box_tabname    = v_nametab.
ch_alv_layout-reprep         = 'X'.
ch_alv_layout-info_fieldname = 'COLOR'. "infofield for listoutput
ch_alv_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      is_layout          = ch_alv_layout
      it_fieldcat        = ch_alv_fieldcat
      it_sort            = ch_alv_sortinfo
      i_save             = 'X'
      it_events          = ch_slis_event
    TABLES
      t_outtab           = p_control
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
Thanks in advance.

ch_alv_layout-info_fieldname = 'COLOR'. "infofield for listoutput
ch_alv_layout-colwidth_optimize = 'X'.
try commenting the above values.and also check the Fieldcatlog.
Check the issue similar issue was resolve by checking catalog and layout:
[ALV Issue solution|Re: Problem when export ALV.]
Regards,
Gurpreet

Had problem with bookmarks, history, back button and google links not working.

For the last five days i've had problems with firefox. First, i noticed that it was running incredibly slowly and then that all the links in the google search were not working. Then i noticed that neither was the history, bookmarks or back button. I went on to facebook chat to ask for help. First, I was told to reinstall firefox, which didn't work. Then i was told to do a "clean" install where you rename the old firefox folder in the programs folder so that it makes sure when it's installed that everything is new and nothing is corrupted. That didn't work either. I then disabled my antivirus software and firewall to see if that was causing the problem. It was not. Then I installed an anti-malware program to remove any adware or spywar,e which it did remove from my computer, but it didn't solve the problem. The chat person was at a loss and I don't blame him/her because so was I.
The reason I'm writing this is in case anyone else has the same problem. The only way I solved it was first by uninstalling and making sure to check the little box asking if you want all personal data and such associated with firefox also removed (which removes cookies as well) and then I finally thought to delete all the cookies from the rest of my computer also. Once all the cookies were gone and i had fully uninstalled firefox and personal data, I reinstalled it with a newly downloaded file and it is once again functioning properly. Hope this is helpful to anyone who's been ripping their hair out. :)

'''I have the same problem!!
But in my case, not just Google links.
The problem happens with all the websites links.
Please...
Help us!!
Thnx'''

Problems with Next and Back Buttons ActionScript 3.0

Hi,
I have set up a Back, Play and Next buttons in a slideshow I am making. The next and back buttons work correctly until it gets to the end.
If I press the Next button it goes back to what appears to be Frame 1 and will not go to the next slide. If I press the Back button it will then go to Frame 201 and If I press next again it will go to Frame 1. It will only go back and forth in between those frames.
If I press the Back button from the beginning it goes through the slide show correctly then it gets stuck at Frame 1. If I press next button it goes to Frame 121 and gets stuck in between 121 and 1.
I can't figure this out please help.
My code on Frame 1 is:
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent) { gotoAndPlay(2); }
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
gotoAndStop(40);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
gotoAndStop(281);
My code on Frame 40 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
gotoAndStop(121);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(1);
My code on Frame 121 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
gotoAndStop(201);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
gotoAndStop(40);
My code on Frame 201 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
gotoAndStop(281);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
gotoAndStop(121);
My code on Frame 281 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
gotoAndStop(1);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);
function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
gotoAndStop(201);

I found the solution! Flash CS5 Tutorial 6 Click On Button Go To Another Frame.avi - YouTube
I had to Convert to Keyframes each frames I wanted to jump to on the buttons layer. Then highlight the button and give each another instance name! Like forward1_btn, forward2_btn, back1_btn, back2_btn... I did that and adjusted the action-script for each button.
Frame 1
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent)
gotoAndPlay(2);
forward1_btn.addEventListener(MouseEvent.CLICK, Shoot_1);
function Shoot_1(event:MouseEvent):void
gotoAndStop(40);
back1_btn.addEventListener(MouseEvent.CLICK, Back_1);
function Back_1(event:MouseEvent):void
gotoAndStop(281);
Frame 40
forward2_btn.addEventListener(MouseEvent.CLICK, Shoot_2);
function Shoot_2(event:MouseEvent):void
gotoAndStop(121);
back5_btn.addEventListener(MouseEvent.CLICK, Back_5);
function Back_5(event:MouseEvent):void
gotoAndStop(1);
And so on...

No back button function in Metalink?

Hi.
Does anyone have a problem with the back button on the (Flash) Metalink?
Any work-arounds for this please, other than going to the non-flash html site instead.
Thank,

user11981168 wrote:
Hi.
Does anyone have a problem with the back button on the (Flash) Metalink?
Any work-arounds for this please, other than going to the non-flash html site instead.In new version (Flash), AFAIK, it is not possible.
Please read
http://www.actionscript.org/resources/articles/142/1/Enabling-a-back-button-within-flash/Page1.html
Regards
Rajesh

BACK button functionality to be changed for custom report in ITS screen

Hi all,
I am working on SRM 5.0 with INTERNAL ITS.I have created a custom report and a transaction code for the same.Now in the SRM Web menu,I have provided a link for this report.
Now i can see all the std menu options like BACK SYSTEM CANCEL as buttons in the web screen.However when i click on the BACK button,it takes me to the SAP EASY ACCESS MENU screen as we see in SAPGUI.
My reqt is that on click of the BACK button,i need to show the HOMEPAGE of the SRM.Is this possible?If so,how?
All inputs will be highly appreciated and rewarded.

Hello!
There are several possibilities how to call transaction:
- You can call it as service (that is what you do when you test it from SICF)
- You can call it through service (or alias) WEBGUI (not using service for the specific transaction to call it)
If you are calling it through WEBGUI then parameter ~SINGLETRANSACTION should be added to service (or alias) of WEBGUI. And there should be added also Log Off URL (in SICF). At this case it should navigate back to the URL which is specified in SICF.
Hope this helps!
Best regards,
Rorijs

The Problem is about Standard Back Button Function in the Report Program.

Similar Messages

Maybe you are looking for