The problem persists!

I posted this problem earlier, but havent found any solution as yet. The problem persists so I am poting the problem again. I am trying to deveop a program, using java and XML which can store contacts of a few persons(using XML) and then retrieve the contact of a certain person when asked (using java).
I have defined the schema in a file name: contactlist-schema
and the corrsponding XML file is named: contactlist.xml
I have created a java program to traverse the contactlist.xml file (document = builder.parse(new File("contactlist.xml")))
it compiles successfully, but when I try to execute it, it gives me this msg:
Parse error: Element type "contactlist" is not declared.
i am using DOM to parse the XML document, the schema is:
<?xml version = "1.0"?>
<!DOCTYPE contactlist-schema>
<Schema xmlns = "urn:schemas-microsoft-com:xml-data"
xmlns:dt = "urn:schemas-microsoft-com:datatypes">
<ElementType name = "contactlist" model = "closed">
<element type = "contact" minOccurs = "0" maxOccurs = "*"/>
</ElementType>
<ElementType name = "contact" model = "closed">
<element type = "name" minOccurs = "0" maxOccurs = "*"/>
</ElementType>
<ElementType name = "name" model = "closed">
<AttributeType name = "tel" dt:type = "string"/>
<attribute type = "tel"/>
<AttributeType name = "email" dt:type = "string"/>
<attribute type = "email"/>
</ElementType>
</Schema>
the corresponding xml file is:
<?xml version = "1.0"?>
<!DOCTYPE contactlist>
<contactlist xmlns = "x-schema:contactlist-schema.xml">
<contact>
<name>
Sarah
<tel> 0161-786-8611 </tel>
<email> [email protected] </email>
</name>
</contact>
<contact>
<name>
Anne
<tel> 0781-787-8956 </tel>
<email> [email protected] </email>
</name>
</contact>
<contact>
<name>
Zac
<tel> 0795-123-4567 </tel>
<email> [email protected] </email>
</name>
</contact>
<contact>
<name>
Lena
<tel> 0414-456-1234 </tel>
<email> [email protected] </email>
</name>
</contact>
<contact>
<name>
Lin
<tel> 0786-025-6974 </tel>
<email> [email protected] </email>
</name>
</contact>
<contact>
<name>
Emma
<tel> 0161-881-1234 </tel>
<email> [email protected] </email>
</name>
</contact>
</contactlist>
i can post my java code as well if sumbody wants to have alook at it

Should you put the complete DOCTYPE reference in (i.e including an externalId)?

Similar Messages

  • When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

    When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
    'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
    I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
    HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
    http://www.musicstudentsforhire.co.uk/musicians-samples.html
    It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

    I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

  • How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

    I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

    Have you read this post written by another forum member?
    The Sad iPod icon.
    However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

    i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
    I tries and it doesnt work!!

    What version of iPhoto? Assuming 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Unable to open external list : Error : Unable to render the data. If the problem persists, contact your web server administrator.

    Hi,
    Please note we are using SQL Server 2008 for sharepoint. Does it matter for this issue?
    Please help.
    Thanks.

    Hi,
    According to your post, my understanding is that you failed to open external list.
    Please change the External Content’s connection properties’ Authentication Mode to BDC identity.
    Then launch the SharePoint 2013 Management Shell and run the PowerShell commands to remove the error.
    Here is a similar thread for your reference:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/69d937e6-f4a3-40e0-b57f-67cddb4ed12e/sharepoint-2013-unable-to-render-the-data-if-the-problem-persists-contact-your-web-server?forum=sharepointcustomization
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)

    Hi,
    When i open my Password Reset portal then provide Username credentials in text box and click on next then asked the Securites Question Answers to me,i provide the correct Answers to the securites Question after this password reset portal asked
    me New Password and Confirm Password then click on next for resetting the password then gives below Error only for 2 Users. and all other users are working fine.
    An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000:)
    Regards
    Anil Kumar

    Anything in the event log?

  • Sharepoint ONLINE - Unable to render the data. If the problem persists, contact your web server administrator

    Hi,
    I have followed the steps in the following link:
    Make an External List from a SQL Azure table with Business Connectivity Services and Secure Store, but I keep receiving the following message when I try to access an external list:
    "Unable to render the data. If the problem persists, contact your web server administrator"
    Note: I'm using SharePoint 2013 ONLINE, and (as far as I know) I have no access to the logs & powershell.
    Any body has had the same issue before?
    Regards.
    Note: I have tried changing my ECT's connection property (through designer 2013) to BDC Identity, but I keep receiving the following error message:
    The metadata object that has Name "xxxx" has a Property with name "AuthenticationMode" and value "RevertToSelf". This value indicates that the runtime should revert to the identity of the application pool, but reverting to the
    application pool is not permitted for partitioned service applications.
    Saeed Fattahi .NET Specialist

    Try changing the External Content’s connection
    properties’ Authentication Mode to BDC identity. You will most like get an error (which I have shown below)
    Below is an error you will received. Read through
    the error carefully.
    Launch the SharePoint 2013 Management Shell
    and run the below commands
    $bcsServiceApp = Get-SPServiceApplication
    | where {$_ -match "Business Data Connectivity Service"}
    $bcsServiceApp.RevertToSelfAllowed
    = $true;
    $bcsServiceApp.Update();
    This Solved the problem for me. you can try
    Sharepoint | TechCenter franklin

  • My Atv2 is  very slow movies and shows take forever to load it plays for a few minutes then pauses again. I thought if was a problem with my wireless router but I replaced it with a new airport extreme and the problem persists. Air play is just as slow.

    My Atv2 is very slow with both AirPlay and rented and purchased content I spoke to apple rep and tried the things he suggested but the problem persists. Now it requires more lead time then the lenght of material being viewed. I haves broadband internet connection and airport extreme router so I don't think this should be a problem. Lately every time the unit goes to the screen saver an error message come up saying there was an error while loading content please try again later and you have to all over again. It is extremely frustrating. Any suggestions? What speed of transfer should I expect using AirPlay ?

    I'm having the same issue.  Ay fixes?  Bought ATV today, music streams but videos don't and mirroring doesn't work either.  Start mirror and severe lag then just drops.  Been trying for couple hours. About ready to return it.

  • Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

    Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
    Sequence of events:
    The main error message is always:
    An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
    Yesterday, I opened Disk Utility and verified the disk. Got this error:
    Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
    Starting manual backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
    Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Found 145601 files (11.88 GB) needing backup
    16.1 GB required (including padding), 620.77 GB available
    Copied Zero KB of 11.88 GB, 0 of 145601 items
    Copied 0 files (Zero KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
    Ejected Time Machine network volume.
    Starting automatic backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
    Does anyone know what the problem is here and what I should do?
    Thanks,
    Tery

    You have repaired your boot drive (which is good) but have you repaired your time machine drive?  I don't own a Time Capsule so I don't know if disk utility can operate on it.  If it can, you should repair it as well.  You may need to erase it and start a new backup.  That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

  • Error message when opening Outlook: The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.

    In an Exchange 2010 server/Outlook 2013 environment, one of our users is getting an error message every time they start Outlook. The error message says: "The operation failed. The messaging interfaces have returned an unknown error. If the problem
    persists, restart Outlook."
    The error log message details are as follow:
    System
    Provider
    [ Name]
    Microsoft Office 15 Alerts
    EventID
    300
    [ Qualifiers]
    0
    Level
    4
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2013-01-08T15:54:49.000000000Z
    EventRecordID
    655
    Channel
    OAlerts
    Computer
    Computer-Name.domain.local
    Security
    EventData
    Microsoft Outlook
    The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
    301670
    15.0.4420.1017
    xyfc
    0x8004011B
    The system is as follows:
    Size of .pst file: 2.3 GB (Unicode format so there should be plenty of space left)
    OS: Windows 7 (64-Bit)
    Application: Outlook 2013 (32-Bit)
    The user upgraded from Outlook 2010 a few months ago and the error message has only recently started appearing on startup. I thought it was a corrupt mail profile, so I have already tried creating a new mail profile, as well as the repairing tool in Outlook.
    I even tested another email account and that worked just fine. So apparently it is something wrong with the specific user's account/profile and not something wrong with the computer - since my email account worked fine on his computer.
    Any help would be greatly appreciated.

    I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message. 
    After I clicked okay I could get into Outlook.
    Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop.  The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
    laptop (so I knew it wasn't a corrupt profile).  This led me to the conclusion that it was a corrupt item(s) in my mailbox.
    To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
    narrow down which folder had the corrupt item if the problem recurred.  I'm happy to say my issue is now resolved.

  • Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

    Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes
    If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
    iTunes for Windows: Troubleshooting CD issues caused by device filters

  • My ipod touch displays message "ipod touch disabled,connect to itunes."I have held down on/of switch until apple logo appears on screen of ipod touch , but the problem persists. Any suggestions?

    My ipod touch displays message" ipod touch disabled,connect to itunes. Ipod touch does no connect with i tunes. I hold on/off switch on ipod touch until Apple log appears on the screen, but the problem persists. Any suggestions ?  I am running Itunes 10.6(7)  My Mac OS X Version is 10.5.8.

    I connected ipod touch to my IMAC while holding on/off switch as stated to by anothe community memberand problem is solved. I wasable to update and reatore.  I have been trying to solve the disable problem
    for weeks. althou you did not actually solve the problem, In time you probably would. You were on the right track  Thank you.
    This helped me
    rbrookstone

  • Creative Cloud : How to install page error "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support."

    I recently purchase a full membership student yearly plan. I was prompted to this page after my payment was confirmed - https://creative.adobe.com/products/download/creative-cloud
    However I continue to receive the error "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support."
    What is going on here?
    Is there another way to access Creative Cloud download and installation?
    Thanks.
    Robert.

    Robertdaw and MyName LOL! please utilize a different web browser.  If you continue to face difficulties then I would recommend beginning the installation process through the Creative Cloud Desktop directly.  You can find details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • I am running Windows 7  and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, 'Error occurred while installing the updates. If the problem persists, choose Tools Download Only and try instal

    I am running Windows 7 home edition and trying to update to iTunes version 10.5 (from version 10.3.1.55) and I keep getting the following error message, ‘Error occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually’ which I do only to have the same error message pop up.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

    I've been trying to download the photoshop free trial for the past three days but instead of installing a message saying "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

    try some steps such as changing browsers and turning off your firewall for downloads
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

    Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

Maybe you are looking for