The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

Similar Messages

New user - questions about email setup and synchronization

Hi,
I'm a not-particularly-techno-savvy new owner of a BlackBerry Curve 8900. My questions are:
1 I seem to only have the option to use a work email account with a BB Enterprise server and not the option to create or add an email addy. How do I resolve this?
2 I've installed the BlackBerry Desktop Manager but when I try to synchronize data from my device - organiser stuff and contacts - I get a message saying there are no applications configured, with subsequent instructions as to how to do this but I then have to choose from a huge list of folders and other stuff and have no idea what to do!
I'm really hoping someone will be kind enough to try and help as I'm floundering dreadfully.
Thanks in advance.
Jan

Jan,
When you install Desktop Manager it gives you the option to setup with an enterprise server or internet email, I can't tell from your post which you have.
However, to pick the applications to sync, assuming you have Desktop Manager 4.7,
open Desktop Manager
Click on Synchronize on the left side of the screen
On the next screen that opens, choose Synchronize under the word "Configure" (also put check marks in all the boxes that will allow you to check)
On the next screen to open choose Synchronization on the "right" side
In a couple of seconds another screen will open up where you can choose what applications to sync (calendar in Outlook, tasks in Outlook, Contacts in Outlook etc) just choose each program you need to sync and choose the program on your PC to use such as Outlook.
I also have the 8900 and it syncs with my Outlook 2003 for contacts, calendar, memo and tasks.
Hope that helps.
Steve

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Hi, I have answered no to the question about saving password for one spesific site. I have changed my mind and would like Firefox to save the password. How do I reactivate the password saver for one spesific site?

Check exception list of your Firefox password Manager and check if your site is there or not?
* http://kb.mozillazine.org/User_name_and_password_not_remembered#Password_Manager_settings

I want to ask the question about phasor measurement.

I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

Answers of the questions about verification ID? I can't remembered!

I can't remember the answers of questions about verification Id and now I can't down more music.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

HT5312 In itune I need to fill up the questions about card but i dont have credit card,what can i do?

In itunes i need to fill up the questions about card but i dont have a credit card, what can i do about that?

Hi Huyen1110,
You can use the steps in this article to create an iTunes Store account that does not use a credit or debit card for payment -
Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

The Question about stock transfer between HU-Management and WM-Management

Hi,
There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
So, My questions are:
1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
Best Regards
Boxer Du
I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

Hi,
Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
For Inbound delivery type 'HID' is maintained in this view.
Best Regards.
Some One want to discuss the details , can contact me. Thanks.

Questions about Objects, pointers, and the memory that loves them

Hey,
This is all just a theoretical discussion so do understand that the code itself is not germane to the topic.
I have been mulling over the whole object release/retain/copy thing and need to understand a bit more the real inner workings of the beast. The catalyst for this is the repetitional fervor that most books on the subject of Objective C have employed. Yet they all seem to fail in a complete explanation of the whys and wherefores so that one can determine on her own the correct implementation of this.
Let's say I have an Object. For the fun of it it is an instance of NSObject and we'll call it myObject.
When I "create" this object thusly:
NSObject *myObject = [[NSObject alloc] init];
What I, in fact get back is a pointer to the object in question, yes?
So when I "seemingly" add this object to an array like:
NSArray *myArray = [[NSArray alloc] initWithObject:myObject];
What is actually placed in the array? is it another pointer to the original object created by myObject or is it a pointer to the pointer of myObject?
The reason I ask this is because I have run into a situation where some previous instructions on the subject have caused errors. I was told that if I did something like this and then passed the array to a calling method that I could release this array and it would then be the responsibility of the calling method to handle the memory. Further more if I place an object into an array and then copy it into another object of the same type as the original then I could release the array and still have the reference to the first object in the second object. When I have done this I get unpredictable results, sometimes the original object is there and sometimes it isn't
At what point should I release the array, after it is passed to the calling method (with the use of an autorelease) or when the class that it is encapsulated in is done?
Sorry about the length of this but I can't believe that I would be the only one that would be helped by such a discussion.
MM

etresoft,
Thanks for the detailed reply. I wish I could say that I wasn't still a bit confused by this. I thought I had this down after going through the lessons. It seems to not be working in practice the way that it works in theory.
My current project is an example
In a class I have declared a couple of ivars thusly:
NSMutableString *source;
NSMutableString *destination;
@property (nonatomic, retain) NSMutableString *source;
@property (nonatomic, retain) NSMutableString *destination;
This is followed by the appropriate @synthesize directives.
in the init method for my class I have the following:
source = [[NSMutableString alloc] initWithString:@"customer"];
destination = [[NSMutableString alloc] initWithString:@"home"];
in a method triggered by a button click I have the following:
if (sender == sourcePop){
source = [sourcePop titleOfSelectedItem];
}else{
destination = [destinationPop titleOfSelectedItem];
NSLog(@"SOURCE-%@", source);
NSLog(@"DESTINATION-%@", destination);
When I run the code and change the source selection the console reads the correct value for what is in the source popupbutton and "home" for the destination. If I then change the destination popupbutton I get a crash and nothing written to the console.
Placing a breakpoint at the beginning of the "if" and running shows me that just before the crash the source ivar is reported as "out of scope." There are no release or autorelease statements for this ivar anywhere in the class. Yet if I change the line that sets the ivar to the value of the popupbutton to this:
[source = [sourcePop titleOfSelectedItem] retain];
The debugger will have the correct value for the ivar and when run normally there is no crash.
I would assume that the problem is that the ivar is being released but I am not the one releasing it. Why does this behavior happen? Shouldn't the retain count still be 1 since the @property directive has it and there is no release in the code? Or is it that the statement that sets the ivar to the value of the popup really just setting it to the pointer and it is the popup that is somehow being released?
Is there something else that I should be doing?
MM

Question about 74GB Raptor and the ubiquitous "F6"

Hey All,
I just installed my raptor and Windows XP, then SP2, etc. without any problems. I didn't press F6 before the Windows install. I'm rather disappointed with the speed of the Raptor given all the good reviews I've heard about its speed. Everything works pretty well and Windows identifies the HD. I've installed it on SATA3 in case I want to overclock. Anyway, my question is: Would reinstalling Windows but doing the whole "F6" SATA Driver install help to improve performance?
Here's my speed test results from Device Manager:
Theoretical Limit: 150
Burst Speed: 113.4
Sustained Speed: 71.3
HD is listed as WDC WD740GD-00FLA2
I have the nVidia nForce3 250 Parallel and Serial ATA Controller (v2.6) listed. I have installed newest nForce Drivers. Should I enable Command Queing? Any BIOS options that would help? Thanks!
AMD Athlon 64 3500+ 90nm Micron
MSI K8N Neo2 Platinum
WD Raptor 74GB
ATI Radeon 9800 XT
512 MB PC3200 Corsair at 2.5-3-3-6

Anyone notice performance increase or decrease of their HD when using the nVidia IDE SW drivers? particularly with a 74GB Raptor? I've also heard of burner issues when installing the IDE SW but have not used my burner yet.

Question about limiting matches and the applicability of LimitFilter?

We have a use-case were the GUI allows the users enter a string that we lookup against an index in the cache using a LikeFilter and by appending "%" to the string entered by the user (the index actually contains the first N characters converted to lowercase and the string entered by the user is converted to lower case and truncated to N positions before the lookup, we have additional logic to handle matching the truncated part of the search string etc but we can ignore this extra complexity for now).
The problem is that if the user enter few (or in the worst case zero) characters the resulting search takes a very long time (since a large number of keys are collected and sent to the client) and the client is not interested (or able) to receive all the results at once.
The LimitFilter seems useful for limiting the number of keys actually sent to the client but from what I read in other forum threads it seems like the nested filter is re-executed and the full result built on the server each time the client request a new page of say 100 keys. This sounds like it still would be time and memory consuming on the server if the underlying filter produce a HUGE number of results each time it is invoked!?
Have I misunderstood the way the Limitfilter operates or is there some other solution you can recommend to the problem?
Best Regards
Magnus

Thanks for the info!
I do however have two specific cases in mind and would like to know more about what overhead calls to "nextPage" would result in:
1. The LimitFilter wraps a AndFilter. The N first characters of a string atribute is indexed (ordered index) and LikeFilter is used with a "xxx%" substring as key together with a InFilter on a indexed integer attribute using a small (typically max 4 element) set of integers. The value range for the integer attribute is faily small (no more than like 10-15 values exists today) so this filter will not limit the search that much (even not sure an index makes much sense but that is how we do it today - how would the amount of re-calculations at nextPage be affected if I drop this index?).
2. A single EqualsFilter on an indexed integer attribute (part of the composite key) using a KeyExtractor as argument.
Ie if I for each of the cases wrap the filter in a Limitfilter (with a page size of N) how much calculations are performed the first time how much of the calculations would be repeated by Coherence each time i call nextPage?
Best Regards
Magnus

Question about Recovery CD and the Vista anytime upgrade

Hi,
I purchased a toshiba laptop about a year ago now, it came pre-installed with vista home premium.
I would like to do a complete clean of my system as its been useless lately and have not done one since i purchased.
It only came with - a product recovery disc and windows anytime upgrade.
But I'm worried because if i do a product recovery i have not got the actual vista disc it SHOULD have and will not have vista on my laptop or any of the files that toshiba put on it.
What do i do??
What does a Product Recovery disc actually have on it and do?? What is the Windows anytime upgrade disc????
I've been told by microsoft and I.T. technicians all over that i should have had a vista installation disc in the box even though the fact that it came pre-installed.
Please Help

> It only came with - a product recovery disc and windows anytime upgrade.
As you said youve got the Product Recovery disk.
This Toshiba disk contains the Toshiba image.
The image is a package and it contains Windows OS, Toshiba drivers, tools, Utilities and additional software.
The usage of the Recovery CD will set the notebook back to the factory settings!!!
Therefore just boot from the Recovery CD and follow the instruction on the screen.
Just for info:
The recovery CD will format the whole HDD but I see that a backup is not important for you.
Cheers

Question about statistics refresh and the job scheduler

Hi Everyone:
So this is the Stats job I see in dba_scheduler_jobs. Reading this it runs the 15th of every month.
SQL> select JOB_NAME, STATE, LAST_START_DATE, NEXT_RUN_DATE from dba_scheduler_jobs;
MGMT_STATS_CONFIG_JOB          SCHEDULED       01-JAN-15 01.01.01.133919 AM -05:00                                         01-FEB-15 01.01.01.100000 AM -05:00
This query shows the status job is currently running in my database.
select to_char(sysdate,'DD-MON-YYYY HH24:MI:SS') "RUNTIME", db_unique_name,
status, client_name, window_group, consumer_group
from dba_autotask_client, v$database; 2    3
RUNTIME                       DB_UNIQUE_NAME STATUS   CLIENT_NAME                         WINDOW_GROUP         CONSUMER_GROUP
21-JAN-2015 18:14:56          DELTAC          ENABLED auto optimizer stats collection     ORA$AT_WGRP_OS       ORA$AUTOTASK_STATS_GROUP
First, is there any relationship between MGMT_STATS_CONFIG_JOB in the first query and "auto optimizer stats collection" in the second query? If so, how do I find the connection?
Second, This 'auto optimizer stats collection' is show as running but I don't see it listed in dba_scheduler_jobs?
Now when I check what jobs are running.
SQL> SELECT * FROM ALL_SCHEDULER_RUNNING_JOBS;
no rows selected
It shows nothing is running. Please help explain this huge disconnect I see.
thanks
Ed

Hi this is a regular database in a linux environment. I tried associating the question in a regular rdbms community but it was greyed out.

The question about portlet customization and synchronization

Similar Messages

Maybe you are looking for