The request failed with HTTP status 404: Not Found

Hi
BPC version we are using is : 5.0.502
When we  Publish all reports using the steps below:
a. Log into BPC Web
b. Click on Available Interfaces> Select BPC for Administration
c. Under Web Admin Task Click Publish Reports
d. Select all of the reports and click the green check mark to publish the
reports.
I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
Event Type:     Error
Event Source:     OutlookSoft log
Event Category:     None
Event ID:     0
Date:          12/8/2008
Time:          11:26:42 AM
User:          N/A
Computer:     BPCAPP
Description:
==============[System Error Tracing]==============
[System  Name] : OSoftCPM
[Message Type] : ErrorMessage
[Job Name]     : AuditMgrService/SetAuditReportFiles
[DateTime]     : 12/8/2008 11:26:42 AM
[UserId]       : MMPlanning
[Exception]
    DetailMsg  : {The request failed with HTTP status 404: Not Found.}
==============[System Error Tracing  End ]==============
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
If anyone knows the resolution for the above issue, please help me.
Thanks in advance
Sajeev Abraham

Hi
Thanks for the response.
Below are the full contents of the error message pop-up.
( System.Expection: the reguest failed with HTTP status 404:Not found at
Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
[]args,sTRING[]paramnames, Boolen[]CopyBack)
at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
strApp,string strFiter)
url is given below
http://<HostName>/osoft/Admin/WebAdminMain.aspx
BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
Sql Reporting server is working.. I could connect using sql management studio.
Thanks

Similar Messages

  • Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

    I have a web page that contains a ReportViewer control.  I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control.  I have set the ReportPath and ReportServerUrl correctly.  I am
    getting an error message.
    Am I suppose to use an .rdlc file rather than a .rdl file?  Does the web server configuration need to use a certain account?
     I am getting the following error message:
    The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
    The request failed with HTTP status 404: Not Found.

    Hi bucaroov,
    The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
    Please follow these steps to solve the issue:
    Logon the Report Server machine.
    Open the Reporting Services Configuration Manager.
    Copy the Report Server URL from 'Web Services URL'.
    Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
    not available, could you please post the error message.
    Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
    For more information, please see:
    Walkthrough: Using the ReportViewer Control in Remote Mode:
    http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

    Hi,
    I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
    with HTTP status 404: Not Found."
    ================================================
    Event code: 3005 
    Event message: An unhandled exception has occurred. 
    Event time: 1/27/2015 5:56:10 PM 
    Event time (UTC): 1/27/2015 5:56:10 PM 
    Event ID: f7aedd39118845b79c17d3442a0d15a7 
    Event sequence: 54 
    Event occurrence: 1 
    Event detail code: 0 
    Application information: 
        Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107 
        Trust level: Full 
        Application Virtual Path: /ESB.Portal 
        Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\ 
        Machine name: <Machine Name> 
    Process information: 
        Process ID: 4712 
        Process name: w3wp.exe 
        Account name: NT AUTHORITY\NETWORK SERVICE 
    Exception information: 
        Exception type: TargetInvocationException 
        Exception message: Exception has been thrown by the target of an invocation.
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
       at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
       at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
       at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
       at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
       at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
       at System.Web.UI.Control.EnsureChildControls()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    The request failed with HTTP status 404: Not Found.
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
    575
       at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
    553
       at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
    46
    Request information: 
        Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx 
        Request path: /ESB.Portal/uddi/uddi.aspx 
        User host address: ::1 
        User: <domain>\<user>
        Is authenticated: True 
        Authentication Type: Negotiate 
        Thread account name: NT AUTHORITY\NETWORK SERVICE 
    Thread information: 
        Thread ID: 19 
        Thread account name: NT AUTHORITY\NETWORK SERVICE 
        Is impersonating: False 
        Stack trace:    at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
       at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
       at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
       at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
       at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
       at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
       at System.Web.UI.Control.EnsureChildControls()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Custom event details: 
    =================================
    Any idea why this is happening and what needs to be done ?
    PLEASE HELP
    Thanks & Regards
    Vikram

    Snippet from the link below:
    If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
    You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
    “%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
    Refer:
    https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
    Sarvanan's blog around this with detailed explanation:
    Configuring Exception Management Portal
    As mentioned above also
    Check Portal Configuration Settings
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • "workflow.asmx" method The request failed with HTTP status 404: Not Found.

    When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
    1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
    2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
    3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
    Error details: {"The request failed with HTTP status 404: Not Found."} "   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
    asyncCall)\r\n   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n   at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
      at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n   at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n   at System.Threading.ExecutionContext.Run(ExecutionContext
    executionContext, ContextCallback callback, Object state)\r\n   at System.Threading.ThreadHelper.ThreadStart()"

    Hi,
    For a better troubleshooting, I suggest you to do as follows:
    1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
    2. On client side you can also access Workflow.asmx from IE to see if it returns error.
    3. Check the link below:
    http://www.mail-archive.com/[email protected]/msg02092.html
    If you want to operate the workflow in Client-Side,  we can use Client Object Model in SharePoint 2010 to achieve it.
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • 'System.Exception: The request failed with HTTP Status 404

    Hi
    BPC version we are using is : 5.0.502
    When we  Publish all reports using the steps below:
    a. Log into BPC Web
    b. Click on Available Interfaces> Select BPC for Administration
    c. Under Web Admin Task Click Publish Reports
    d. Select all of the reports and click the green check mark to publish the
    reports.
    I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Below are the event log relation to this error.
    Event Type:     Error
    Event Source:     OutlookSoft log
    Event Category:     None
    Event ID:     0
    Date:          12/8/2008
    Time:          11:26:42 AM
    User:          N/A
    Computer:     BPCAPP
    Description:
    ==============[System Error Tracing]==============
    [System  Name] : OSoftCPM
    [Message Type] : ErrorMessage
    [Job Name]     : AuditMgrService/SetAuditReportFiles
    [DateTime]     : 12/8/2008 11:26:42 AM
    [UserId]       : MMPlanning
    [Exception]
        DetailMsg  : {The request failed with HTTP status 404: Not Found.}
    ==============[System Error Tracing  End ]==============
    We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
    If anyone knows the resolution for the above issue, please help me.
    Thanks in advance
    Sajeev Abraham

    Hi,
    This forum is for BI Integrated planning an BW/SEM BPS. For BPC related questions please post this message in the forum for Enterprise Performance Management (Enterprise Performance Management (SAP EPM)).
    Best regards,
    Gerd Schoeffl,
    SAP NetWeaver RIG BI

  • SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600 - The request failed with HTTP status 503: Service Unavailable

    Hi all,
    knowning that there are already a lot of posts concerning above message, I have to write an additional one as I could not find a solution on the web yet.
    Situation:
    Windows Server 2008 forest including empty root and two child domains, one child domain does have SCCM SP1 (central primary site WND) installed on W2k8 x64 machine including WSUS 3.0 SP1 => everything is working fine.
    Second child domain also contains a SCCM SP1 server  (primary site HUN) running on W2k8 x64 and is defined as child site of central site WND => everything is working fine too - except Software Updates.
    WSUS 3.0 SP1 installed on both SCCM servers by creating additional web site (not using "defautl web site") and configured ports 8530 and 8531 (SSL not used!). No proxy necessary/used. All WSUS 3.0 requirements for W2k8 are installed (IIS roles)
    Error:
    SMS_WSUS_CONFIGURATION_MANAGER - MessageID 6600:
    SMS WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "xxxx0003".
    Possible cause: WSUS Server version 3.0 SP1 and above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP1 or greater is installed. Verify that the IIS ports configured in SMS are same as those configured on the WSUS IIS website.
    wsusutil checkhealth =>OK
    downloading updates from WSUS at central site (SUSDB and WSUS folder equal in size) =>OK
    wsus admin console able to connect and configuration possible => OK
    IIS ports configured within SMS are equal to those configured for WSUS website
    SCCM config (using Configuration Manager Console) does look correct - ConfigMgr Software Update Point role properties and Software Update Point Component properties
    wcm.log does report an error: (SCCM Log files at the end.)
    "The request failed with HTTP status 503: Service Unavailable"
    IIS log files of both websites (default web site and WSUS Administration website) do not show any errors.
    Questions:
    What else should I look at? (registyr, SUSDB content,..)
    What exactly does happen during the attempt to configure the upstream server by the SMS_WSUS_Configuration_Manager component? I guess a SMS process tries to contact a webservice - would it be possible to debug in more detail ?
    And finally - Who does know the solution ?
    wcm.log:
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber) SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    Remote configuration failed on WSUS Server. SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4468 GMTDATE=Mi Jul 16 10:49:47.758 2008 ISTR0="xxxx0003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    Waiting for changes for 59 minutes SMS_WSUS_CONFIGURATION_MANAGER 16.07.2008 12:49:47 4468 (0x1174)
    wsusctrl.log (looks fine to me - is able to connect to local WSUS !):
    SMS_EXECUTIVE started SMS_WSUS_CONTROL_MANAGER as thread ID 6156 (0x180C). SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 2732 (0x0AAC)
    This is a WSUS Role as WSUS registry key exists. SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Local WSUS Server Proxy settings are correctly configured as Proxy Name  and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Waiting for changes for 0 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Timed Out... SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.0.6000.273, Major Version = 0x30000, Minor Version = 0x17700111 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Found WSUS Admin dll of assembly version Microsoft.UpdateServices.Administration, Version=3.1.6001.1, Major Version = 0x30001, Minor Version = 0x17710001 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    The installed WSUS build has the valid and supported WSUS Administration DLL assembly version (3.1.6001.65) SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Local WSUS Server Proxy settings are correctly configured as Proxy Name  and Proxy Port 80 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully connected to local WSUS server SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    There are no unhealthy WSUS Server components on WSUS Server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:01 6156 (0x180C)
    Successfully checked database connection on WSUS server xxxx0003 SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
    Waiting for changes for 57 minutes SMS_WSUS_CONTROL_MANAGER 16.07.2008 12:04:02 6156 (0x180C)
    wsyncmgr.log (as a result of being not able to configure upstream server I guess):
    STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:03:51.481 2008 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:03:51 4476 (0x117C)
    Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=xxxx0003 SITE=HUN PID=2424 TID=4476 GMTDATE=Mi Jul 16 10:08:51.636 2008 ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_SYNC_MANAGER 16.07.2008 12:08:51 4476 (0x117C)

    I just experienced the exact same scenario.  After much digging I found that csakg6so posted a fix at
    Windoows-Noob
    Run Internet Explorer as the SYSTEM account (psexec -s -d -i cmd.exe & C:\Program Files\Internet Explorrer\iexplore.exe)
    Go to internet options
    Go to conections
    Go to LAN settings
    Uncheck all boxes
    The original post said to reboot, but that wasn't necessary for me.
    After initiating a manual Software Update sync the WCM.log and WSyncMgr.log errors do not return and new updates are synchronized.

  • Problems connecting to SSRS using IReportServerCredentials, the request failed with http status 401: unauthorized

    We have a hosted SSRS server and we access it's reports using the reportviewer in an ASP.net application.
    We are getting the error: The request failed with HTTP status 401: Unauthorized. When trying to run one of the reports. I have confirmed that the login details work when logging into the report manager page directly.
    I have implemented an instance of IReportServerCredentials in a separate class (below) and I call it from the page before it tries to access the report. I'm not sure if this is all I need but can't seem to find any other info.
    I have managed to gain access connecting to the external server from my PC and accessed the report, but when I promote the code to production and run it from there on my local PC I get the unauthorized message again: the request failed with http status
    401: unauthorized
    The class:
    [Serializable]
    public sealed class MyReportServerCredentials :
    IReportServerCredentials
    public WindowsIdentity ImpersonationUser
    get
    // Use the default Windows user. Credentials will be
    // provided by the NetworkCredentials property.
    return null;
    public ICredentials NetworkCredentials
    get
    // Read the user information from the Web.config file.
    // By reading the information on demand instead of
    // storing it, the credentials will not be stored in
    // session, reducing the vulnerable surface area to the
    // Web.config file, which can be secured with an ACL.
    // User name
    string userName =
    ConfigurationManager.AppSettings
    ["MyReportViewerUser"];
    if (string.IsNullOrEmpty(userName))
    throw new Exception(
    "Missing user name from web.config file");
    // Password
    string password =
    ConfigurationManager.AppSettings
    ["MyReportViewerPassword"];
    if (string.IsNullOrEmpty(password))
    throw new Exception(
    "Missing password from web.config file");
    // Domain
    string domain =
    ConfigurationManager.AppSettings
    ["MyReportViewerDomain"];
    return new NetworkCredential(userName, password);
    public bool GetFormsCredentials(out Cookie authCookie,
    out string userName, out string password,
    out string authority)
    authCookie = null;
    userName = null;
    password = null;
    authority = null;
    // Not using form credentials
    return false;
    The call to the class, just before the report is run:
    if (GetConnection.GetConnectionString().ToString().Contains("IP of external server removed"))
    invoiceviewer.ServerReport.ReportServerCredentials = new MyReportServerCredentials();
    We have tried so many things here, we don't even care whether the server authenticates or not but it appears to be as standard. Our hosting company has also drawn a blank and changed so many settings to no ava

    Hi Nasa1999,
    According to your description, you are getting the error: The request failed with HTTP status 401: Unauthorized when you access the report using the ReportViewer in an ASP.net application.
    Regarding the 401 error, it could cause by the Service Principal Name(SPN) for the account the Reporting Services is running under hasn’t been registered when the Reporting Services is configured to use Kerberos authentication. So in your scenario,
    please check if you are using Kerberos authentication. If that is a case, please make sure SPN is configured correctly. For more information, please refer to the similar thread:
    The request failed with HTTP status 401: Unauthorized. in SSRS.
    If issue persists, please check the Reporting Service error log (default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles) around the time that the error message thrown out.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • "The request failed with HTTP status 401: Unauthorized"

    Hi,
    I'm trying to get both RSS feeds and SSRS reports on a web application which is having NTLM authentication without Kerberos. The catch is proxy setting, if I give <proxy autoDetect="false" /> in web.config of my sharepoint web
    application SSRS reports will be rendered in SQL Server Report viewer perfectly (I deploy using BIDS), but RSS viewer webpart will not display my internet feeds. If I give
    <proxy autoDetect="true" /> RSS feeds are displayed properly but SSRS report will throw the following error.
    The request failed with HTTP status 401: Unauthorized.
    Description:
    An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [WebException: The request failed with HTTP status 401: Unauthorized.]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +412862
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +300
    Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.ListRenderingExtensions() +53
    Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.ListRenderingExtensions() +207
    Microsoft.Reporting.WebForms.ServerReport.ListRenderingExtensions() +130
    Microsoft.ReportingServices.SharePoint.UI.WebParts.ActionMenu.OnPreRender(EventArgs e) +180
    System.Web.UI.Control.PreRenderRecursiveInternal() +108
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Control.PreRenderRecursiveInternal() +224
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3394
    I tried to work around this by adding proxy settings with bypass list.
    <system.net>
        <defaultProxy useDefaultCredentials="true">
          <proxy proxyaddress="http://<proxy IP address>:<port>" bypassonlocal="true" usesystemdefault="true" />
          <bypasslist>
      <add address="<my report server>" />
      <add address="http://<report server>:8080/reportserver/" /> 
      <add address="<IP of my report server>" />
          </bypasslist>
        </defaultProxy>
    </system.net>
    This makes RSS feed to work but SSRS throw the above error. I would need some advice from Microsoft on how to fix this.
    Note: My sharepoint site cannot be anonymous. I have just once service account that runs sql server service, report service, sharepoint services etc. This account is local admin on all servers, has highest access on sql box, run SSRS web service and app
    pools, etc.
    I have four servers, 2 WFE in windows load balanced, 1 app server (running Central admin and report service in sharepoint integrated mode), 1 db server hosting all content and config dbs and report server db.
    Regards,
    Manoj
    Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618

    Hi,
    Thanks to share your post.
    For the issue,
    do you mean that the error happen with the use of NTLM authentication without Kerberos? If yes, the possible cause should be the lacking of Kerberos.
     My suggestion is to implement the Kerberos authentication in your environment. You may check it and test it. For the detailed steps of implementing of the Kerberos:
    http://blogs.msdn.com/b/martinkearn/archive/2007/04/23/configuring-kerberos-for-sharepoint-2007-part-1-base-configuration-for-sharepoint.aspx.
    http://blogs.msdn.com/b/james_world/archive/2007/08/20/essential-guide-to-kerberos-in-sharepoint.aspx.
    Hope this could help you!
    Leo

  • "The request failed with HTTP Status 400: Bad Request." when running reports

    Hi,
    I installed reporting services and the install went fine.  The Reporting Services are located on a different server.  I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
    System.Net.WebException
    The request failed with HTTP status 400: Bad Request.
    Stack Trace:
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
       at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
       at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
       at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
    I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available.  If no options are availble the report just doesn't run,  I don't get and error if I select "View Report" mutiple
    times.
    If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
    One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
    Thanks

    I reviewed the topic and found a couple of steps I missed the first time around.  I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission. 
    I then uninstalled the role and reinstalled it.  I am still getting the 400 error.
    When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log).  I couldn't find anything specific related to it.  By reading a few "related" Internet posts I came accross a intial setup
    blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result.  I turned them off again. 
    Here is the tail end of the SmsAdminUI.log
    [19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
    [4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
    [15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
    [1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementBaseObject.get_wbemObject()
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
       at System.Management.ManagementBaseObject.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Error retrieving object FileType=2";
     ErrorCode = 2151811598;
     File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
     Line = 1208;
     Operation = "GetObject";
     ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
     ProviderName = "ExtnProv";
     StatusCode = 2147749890;
    \r\n
    [1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n   at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
       at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
    [1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObject.Initialize(Boolean getObject)
       at System.Management.ManagementBaseObject.get_wbemObject()
       at System.Management.PropertyData.RefreshPropertyInfo()
       at System.Management.PropertyDataCollection.get_Item(String propertyName)
       at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
       at System.Management.ManagementBaseObject.get_Item(String propertyName)
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Error retrieving object FileType=2";
     ErrorCode = 2151811598;
     File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
     Line = 1208;
     Operation = "GetObject";
     ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
     ProviderName = "ExtnProv";
     StatusCode = 2147749890;
    \r\n

  • SSRS 2012 - The request failed with HTTP status 401: Unauthorized.

    I have SSRS Reporting Services 2012 load balanced on two servers. 
    Both servers are running Windows Server 2012 R2.
    I have a Web Application that renders reports by utilizing this SSRS Reporting Services 2012. 
    When the application generates a report using load balancing I get error the message, “The request failed with HTTP status 401: Unauthorized.”
    However, using only one reporting server, the application is able to render the report just fine. 
    It seems that when the requests are shared between the servers the problem occurs.
    One solution is to configure Load Balancing with “Source IP” persistence. 
    This seems to work.  I believe this is a “sticky” session. 
    With this Load Balancing configuration, the application can render the report just fine. 
    (However, I have not done complete testing.)
    The problem occurs when calling the service ListChildren(string, bool ) on SSRS. 
    I have been researching online.  I tried modifying the registry on the servers based on online articles (see below.)
    Here are some articles I have looked at.
    http://msdn.microsoft.com/en-us/library/cc281307(v=sql.110).aspx
    http://blogs.msdn.com/b/lukaszp/archive/2008/07/18/reporting-services-http-401-unauthorized-host-headers-require-your-attention.aspx
    http://blogs.msdn.com/b/lukaszp/archive/2008/07/18/reporting-services-http-401-unauthorized-host-headers-require-your-attention.aspx
    Is there a better solution?  Will Load Balancing with “Source IP” persistence be an acceptable solution?  Is there a patch needed for the servers or SSRS?  Please let me know.

    Hi GoGladiator,
    Generally, "The request failed with HTTP status 401: Unauthorized" occurs when
    The service account used to connect to the Report Server is not authorized.
    The Reporting Services is configured to use Kerberos, however, we didn't register Service Principal Name (SPN) for the account the Reporting Services is running under.
    So, to fix this issue, we can refer to the follow steps:
    Make sure the user is able to connect to the Report Server.
    If using Kerberos authentication, please make sure SPN is configured correctly. If using Kerberos authentication, please make sure SPN is configured correctly.
    For more information about Kerberos Authentication and how to register SPN for a report server in Reporting Services, please see the articles below:
    Configure Windows Authentication on the Report Server
    Register a Service Principal Name (SPN) for a Report Server
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Getting error "The request failed with HTTP status 401: Unauthorized " for _vti_bin/Authentication.asmx

    Hi All,
    My Web application is FBA application and I am using the lists.asmx services in my custom webpart. To run this lists.asmx service in FBA enabled site we need to use Authentication.asmx service..
    I referred this link:
    http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/21867e28-75d5-42c8-850b-bfb5c5894eed .
    I wrote a code as mentioned in this article but now I am getting  error "The request failed with HTTP status 401: Unauthorized " for Authentication.asmx service itself. Can somebody help me why it is not working even everything looks
    correct?
    Thank you.
    Regards,
    Rahul Shinde.

    Hi Rahul,
    Give permissions to the user on the web application.
    Central Admin -->Application Management --> Application Security -->Policy for web application --> Select the
    web application --> Add User
    For more information, refer to
    http://microsoftdev.blogspot.com/2009/10/sharepoint-web-services-access-give.html
    http://www.codeproject.com/Articles/24244/Access-a-Forms-Based-SharePoint-Site-s-Web-Service
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • SQL Server Reporting Service 2008 R2 - The request failed with HTTP status 401: Unauthorized.

    I got the error "The request failed with HTTP status 401: Unauthorized." when I call the Reporting Service Web Service.
    The code is very simple:
    // Initialise the reporting service Web Service
    this.RSWebService = new ReportingService2010();
    // Pass windos authentication credentials to Web Service
    this.RSWebService.Credentials = System.Net.CredentialCache.DefaultCredentials;
    // List children
    List<CatalogItem> reports = this.RSWebService.ListChildren(folder, false).ToList();
    The SQL Server is installed on a different machine (say server A) from the Web server (say server B). We are using Windows Server 2003.
    The code work fine for all the scenario below:
    i) Run locally (XP) to call the web service on the sql server
    ii) Provide the Network Credentials with the username, password, and domain when calling the web service
    iii) If the web server and sql server is using same server (i.e. not distributed)
    I'm using windows authentication and impersonation. Any idea?

    Hi Raymond,
    If I understand correctly, the issue only happens in the environment that the web server is different with the SQL Server Reporting Services server. This means the web server is a remote server of the Report Server. Windows Integrated authentication is used
    in this case. When running the web page, the 401 error occurs.
    If so, it is actually a double hop issue. The double-hop problem will usually only be an issue to those of you who write some sort of web-based code (a web application or web service) that uses impersonation.
    To fix the issue, we can configure kerberos authentication for the web application and the SQL Server Reporting Services.
    Below is a great article that has delivered many solutions to fix the issue you met:
    http://odetocode.com/articles/216.aspx
    Additionally, you can read the following article to know more about double-hop:
    http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
    http://blogs.msdn.com/b/knowledgecast/archive/2007/01/31/the-double-hop-problem.aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT
    Thanks Jin. I believe this is the cause of the problem as well.
    I tried to register the SPN but unfortunately it still doesn't work. I'm not sure whether I'm using the correct SPN name.
    I have 3 reporting server instance on the SQL box. So the Web Service URL is like
    http://Server:80/VirtualDirectoryDev,
    http://Server:80/VirtualDirectoryTest  and
    http://Server:80/VirtualDirectoryStaging .
    What's the SPN I need to register?
    I tried
    Setspn -a http/Server:80/VirtualDirectoryDev domain\account
    and
    Setspn -a http/aerver:80 domain\account.
    But both of them are not working :(

  • Service Clients failing with "The request failed with HTTP status 401: Unauthorized"

    Hello,
    We have implemented a solution using the SSRS web service clients as produced by the WSDLs.  We have deployed the application on one server, and via the code we are calling the SSRS on another server (i.e., not using ReportViewer, etc.).  We do
    know that the user signed in has permissions since from the same staging server the Report Manager and Reports can both be accessed and viewed.  However, it's only when we run the application and attempt to execute a report on the remote SSRS server that
    we get the following error:
    The request failed with HTTP status 401: Unauthorized. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
    methodName, Object[] parameters) at AMC.AssetTracker.Reporting.ReportExecution.ReportExecutionService.LoadReport(String Report, String HistoryID) at AMC.AssetTracker.Reporting.Report.GetReportByteArray() at AMC.AssetTracker.Reporting.Report.get_ReportStream()
    at AMC.AssetTracker.Reporting.Report.get_GetWebUIDisplay() at AMC.AssetTracker.UserControls.AssetTrackerMain.btnGenerate_Click(Object sender, EventArgs e)
    The credentials we have tried are the DefaultCredentials.  One question I have is how do you use custom credentials if neither the DefaultCredentials or the DefaultNetworkCredentials work?  Also, this service call does have to go through an ISA
    server before reaching the SSRS server.
    Any ideas?
    Thanks.

    It sounds like Kerberos authentication is needed in your situation since it's not on the same box.
    There is a one-hop limit with NTLM authentication.
    For more info please see the link below:
    http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/452e9627-cd8e-4709-bdd0-fbafcf9fd719
    Hope this helps!
    Thanks, Michael Mei

  • Ssrs 2008 r2 The request failed with HTTP status 401: Unauthorized.

    hello,
    I created a report from one user who is owner of sharepoint site ,where sharepoint foundation site is installed.
    but when i tried to access that report from another machine with same user owner of the site ,i received the error message as
    the request failed with http status 401 unauthorized.
    please help.
    thanks

    Hi Krishnakumar_DeV,
    The Reporting Services Web service must use Windows integrated authentication in SharePoint integrated mode. If it is set to Basic, Anonymous, or otherwise, it will not function as expected, if at all.
    The HTTP 401 error may occur if the Reporting Services integration has been configured to use Windows authentication, while Kerberos authentication has not been configured correctly. In order to solve the problem, we can configure the data source to use
    stored credentials or refer to the solutions in the "5.4 The request failed with HTTP status 401: Unauthorized" section of the following article:
    http://msdn.microsoft.com/en-us/library/ee384252(v=sql.100).aspx
    Hope this helps.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Basic Authentication:The request failed with HTTP status 401: Unauthorized.

    Are there any problems with Basic Authentication? I have a test BPC 5.1 SP3 single server installation. When I set the IIS Virtual Directory to use Basic Authentication instead of Integrated Security, I get a 401 Unauthorized. It works fine when I use Integrated Security.
    Thanks,
    Stephen
    Server Error in '/OSoft' Application.
    The request failed with HTTP status 401: Unauthorized.
    System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
    [WebException: The request failed with HTTP status 401: Unauthorized.]
       OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset) +1498
       OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e) +216
       System.EventHandler.Invoke(Object sender, EventArgs e) +0
       System.Web.UI.Control.OnInit(EventArgs e) +67
       System.Web.UI.Control.InitRecursive(Control namingContainer) +241
       System.Web.UI.Page.ProcessRequestMain() +197

    This issue is not really related to SP3 upgrade it is more a problem of windows. Tos solve this issue please read the follow article from Microsoft and do the steps requested to solve this issue.
    http://support.microsoft.com/kb/926642/
    After rebooting your server your access issue using Basic authentication should be solved.
    This problem happen usually into multiserver environment.
    So I would like to know if you are using domain users with local users in the same time on that computer.
    Because even that can be a problem.
    Regards
    Sorin Radulescu

Maybe you are looking for

  • No sound on Windows XP Pro

    Because the banks will not guarantuee internetbanking under Windows XP I have installed Windows 7 on two of my Pavilions. Because I am comfortable with XP and do not want a plethora of operating systems I have rolled my Pavilion t3710.nl back to XP (

  • Automatic merging of map files in RoboHelp?

    [Hope this isn't a double post; my first attempt ended in network error and forum doesn't seem to have that post] My group is charged with developing a help system using RoboHelp 7. Output type will be WebHelp. The interface between context-sensitive

  • Problem obtaining BitmapData for a canvas via Javascript

    Hi, For my web application I have one HTML button, which is outside of flash application shown on the same page. Via Flex application I've declared callback function to be called by Javascript in this way: ExternalInterface.addCallback("cbProcessButt

  • Put the report into shape for custom step type

    Hi All, I created a custom step type and also managed to get the results logged into the report file. In the report file(See '[15 33 14][22 10 2007].xml.vi' please remove the 'vi' extension) the 'StepResult' (created by my custom step type) appears j

  • How do I switch from USA account to Australian account?

    I have an ipad