The same delivery in two document for shipment

Hello,
I wonder if there is a way to block the delivery if it is already in another document shipment. Is there any way in customizing? Because the way it is configured the system is allowing a single delivery is contained in two documents of freight transport and calculating twice.
observation - the delivery is not split.
Thanks,
Tatiane

Hi,
In standard system I'm not aware of any setting that would restrict the assignemnt of one delivery to several shipment.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5f/e411bb044411d2bf5d0000e8a7386f/frameset.htm
Since a delivery for which the billing document is to be created can be part of several shipments (for example, in the case of a transportation chain), it can happen that several shipment cost documents need to be calculated so that the billing document itself can at all be created.
I guess you have to:
- use proper selection criteria when assigning deliveries to the shipment (e.g. proper transportation planning status (VBUK-TRSTA) --> you can define variants)
- go to development (SPRO > LE > Transportation > System Modifications > User Exits for Transportation + SPRO > LE > Transportation > System Modifications > Biusiness Add-In in Transportation)
In Is-Oil there are built in checks:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/23d610419311d2ac100000e829fbfe/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Jan 19, 2010 8:53 PM

Similar Messages

Can create twice billing document for the same delivery in STO

Hi experts,
I donot have problems in Standard Sales order when I create billing doc via VF01. When I try to create another billing doc in VF01 for the same delivery it says error, as the item is already invoiced.
This is correct.
But while creating invoice for STO order, system allows me to create more than 1 billing document for the same delivery. If we accidentally or purposefully create it allows to create many.
Could you let me know where in SPRO (IMG) I can control this?
Thanks,
Pri

Hi
STO billing if it is intercompany STO followed by IV billing type you can create only once
No special settings reqd to achieve this as you bill (IV billing type) the delivery the first time, the delivery status gets completed
If Intracompany, the billing type is proforma invoice F8 and this can be created as many times as you wish as proforma doesnot update accounting
if your issue is this
Even this also if you want to restrict only once then try with copying requirenments 311 at item level (i hope standard item category NLN is used) in VTFL between header NL to F8
Regards
Raja

2 material document number having the same delivery number???

hi
is it possible to have 2 different material document numbers assigned to the same Outbound delivery number????
the situation is that one of the material document number was assigned to a particular delivery number say 'a' and deleted later on a particular date.
on the same date another material document number was created with the same delivery number 'a'.
is this possible to happen .(i.e functionally correct) ?????? bcoz i am getting such type of output in transaction "MIGO"...
PLZ HELP .POINTS WILL B AWARDED!!!

Hi,
Yes,it is possible.If you take example of partial delivery then say for example one delivery contains 10 items.Out of whixh I have delivered 4 yesterday and 6 today.This is done via creating transfer orders.Then two material documents will be created at time of PGI but they will refer to same delivery number.
Reward points if useful
Regards,
Amrish Purohit
Message was edited by:
AMRISH PUROHIT

How to Get Choices as a Dropdown from a different Column for the same Item In a Document Library?

Hello All,
I was trying to see if there is any way that we can get the choices for a Field from another filed in the same item in a Document Library.
To be specific.
I have Created a Project Document Set, Which has a Column called "Project Members" where all the members will be listed. This will be inherited to all the documents in that Project Document Set. This is used to grant Permission using Workflow.
I also have "Document Members" Column(This is only for Documents) who will be given Edit permissions to that Document using a Workflow. This can be any type of column(choice, People or Group etc) As long as I can select multiple values.
I am looking for a way to get the "Project Members"(Values or Users) as choices for "Document Members". I know this is possible in the List as you can customize in the InfoPath Form. But not sure in the Document Library.
Document Members can only be the members from the Project Members, In order to grant granular Permissions for the project And Documents using a Workflow
Document Library
Project Document Set Name
File Name
Project Members
Document Members
Project A
User1;User2;User3
Doc1
User1;User2;User4
User1;
Doc2
User1;User2;User5
User1;User2;
Doc3
User1;User2;User6
User1;User2;User3;
Project B
User5;User6;User7;
Doc1
User5;User6;User7;
User7;User5
Doc2
User5;User6;User7;
User7;User5
Doc3
User5;User6;User7;
User5;User6;User7;
Thanks for your time.

>
Jenny Karunakaran wrote:
> Hi Jung,
>
> Thanks for the reply. But I dont know how to assign value set to this attribute(i.e. Context atribute to which filter value property is bound). Can I use a supply function for this ?
>
>
> Regards,
> Jenny
No. A value set and a supply function are two completely different things. You use this Context API to populate the value set for an attribute:
IF_WD_CONTEXT_NODE_INFO=>SET_ATTRIBUTE_VALUE_SET
Value Sets are also how ByKey UI elements (like the DropDownByKey) are built. Here is a help document that discusses value sets - but in the context of the ByKey UI elements. The process is the same for creating the value set however:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bb/69b441b0133531e10000000a155106/frameset.htm

Open several PDFs in the same Reader window using tabs for each document

How do I open several PDFs in the same Reader window using tabs for each document? I'm using Reader 11.0.03 and Windows 7.

That would be a nice feature! Suggest it at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform - hopefully it will make it into Reader XII.

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Multiple hierarchial structuring for Accounts that apply at the same time to a document

Use Case:
There are 2 ways of logically grouping entities for our UCM Accounts permission:
For external Partner users (one taxonomy applies)
@Corp/Partner1, @Corp/Partner1(Region 1)   are valid accounts that can be assigned to users so that they get access to documents owned by all their Subsidiary companies or specifically their company - Partner in Region 1.
For internal users (both taxonomy applies),
@Corp/Region1, @Corp/Region 1/Partner 1(Region 1)   are valid accounts that can be assigned to be users so that they get access to documents owned by all Partners in Region1 or specifically Partner1 in Region 1.
@Corp/Partner1, @Corp/Partner1(Region 1)   are valid accounts that can be assigned to users so that they get access to documents owned by all the Subsidiary companies of Partner 1 or specifically Partner in Region 1.
Question:
At the document level in UCM, looks like only one Account structure can be tagged. Given that,
How can we deign this using Accounts so that both taxonomies are supported at the same time to provision security for both internal and external users?
Do we have to use ACLs (Role Entity ACL component) as that is the only one that seems to be support multiple roles with OR condition? If so, can we totally bypass Accounts to only use Role Entity ACLs without performance impact?

Hi user11282566
Please refer http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c05_security.htm#CSMSP569 and it makes the statement mentioned below
When accounts are used, the account becomes the primary permission to satisfy before security group permissions are applied. You can also think of a user's access to a particular document as the intersection between their account permissions and security group permissions.
Ideally, you can use any of the combination. But when you enable accounts, security model gets update like - every content should belong to some security group and account. And account should be the primary condition to satisfy before security group permissions are evaluated. So this might make you different security groups for different context based on your requirement. Please take care of this aspect.
I've not used Oracle Document Cloud yet, so cant comment on security model. Below links from a-team might provide you some pointers
http://www.ateam-oracle.com/integrating-with-documents-cloud-using-a-text-editor-as-an-example/
http://www.ateam-oracle.com/calling-oracle-documents-cloud-service-rest-apis-from-webcenter-content-custom-components/
If you''ve an instance you can sign-up for oracle document cloud and try some test cases.

My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE

My mac book gives electric shock through its entire body while being charged from AC out let. is there a solution to the problem? my other two friends are haveing the same problem who recently have purchased the same note books, its weird for APPLE products. Please give any solution.

Is the MBP properly grounded? Are you using the three prong plug? If not, do so and your problems may disappear. If not, do what SwankPeRFection suggests.
Ciao.

Can the iphone 5 support two headsets for listening to the same music on the phone?

Can the iphone 5 support two headsets for simultaneous listening to the same music on the phone?

and it will mute a wired headset when connected to bluetooth
using a wired splitter will also 1/2 the volume as well you are putting the headsets in parallel giving each only half of the current sendt from the minijack

Posting multiple goods issues against the same delivery

Hello gurus,
We are a fashion apparel company using ECC 6.0 and would like to know if it is possible to post mutliple goods issues against the same delivery?
I will explain the business requirement.
- We create a stock transport order to deliver 400 units of merchandise to on or our retail stores (STO is created and processed to a delivery).
- This information is passed down to our warehouse management system (which is not SAP)
- Our warehouse management system has the ability to split a delivery into multiple shipment when needed. For example, our warehouse may only be able to complete 250 units for our morning shipment and will therefore pick, pack and post this. This will feed back into SAP and process a 641 movement so that the units now show as "in transit". This is needed so that our stores can process the ASN and move the units into their inventory when they receive the merchandise later that day.
- During the afternoon, our warehouse will process the remaining 150 units and will ship this to our store later in the evening or next day.
Currently, we are not able to process another goods issue against a delivery as we close out the delivery during the first goods issue. We would prefer not to have to generate a new delivery for our DC and let them continue to process against the same delivery, but we are unsure how to configure this.
Any help or guideance would be extremely appreciated
Thanks in advance

Hi RJ,
First of all sorry to write such a lengthy reply,In one line if i want to summerize then it is not possible with standard SAP however we can achieve this by writing some piece of code in both the system
AS - IS
               Business process
          From business process point of view you are right that once the pick & pack is in process it is not advisable to create a new delivery document for balance quantity and share the same with WMS as then they have to create a new document in WMS and start picking based on that rather then the old delivery document number. if i am in your position then i can give a thought like this
e.g.
Delivery                                                  - 100 Unit
Shipment confirmation from WMS            -   60 Unit
Change in delievry quanity / Pick qty        -   60 Unit
Invoice from SAP                                    -   60 Unit
Second confirmation from WMS                          -   40 Unit
Change in the existing delivery quantity                -   Now here we have two option either
1) Change the delivery quantity / Pick qty to (60+40) =100 or
2) Remove the 60 and update 40 as delivery and pick quantity
Pros & Cons
if you will select option 1 then furhter invoice will happen for 100 unit which is incorrect as physically you are shipping only 40 unit
if you are selecting option 2 then the document flow is incorrect as you don't have history(in SAP) for the 60 unit which was shipped earlier
Solution ::
so in my opinion the best option is to create a seperate delivery document (store the old delviery number in one of the field of the new delivery and pass the same to custom segment of the IDoc) transmit the IDoc to WMS write the validation logic in WMS
Find the record with old deliver number in the WMS system, check the status whether it is active or inactive
if it is acitive Validate the Material + qty with the WMS record(Material + balance quantity) if both are same then pass the new deliery number to custom field of the WMS table
At the time of confirming back to the SAP, Write a piece of code in SAP that if the incoming idoc custom field(new delivery number) field is populated then ignore the orignal document number and post the document using the new delivery document number
Hope this help

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

TS2972 I have multiple libraries on the "same computer" with two different desktops, can't I share between two libraries on the same computer?

I'm trying to use home sharing to share content between libraries so some of the combined content in a given library, can be synced to an ipad. Instad of having mulitple computers, i have multiple libraries on the same computer using two desktops. How do I share within the same computer?

iTunes must be running for home sharing to work. There is no way to have home sharing running simultaniously for two users on the same computer.
Simply add the media files using File > Add File/Folder option in iTunes.

How can I have the same environment on two macs on is a macbook pro and the other a Mac mini

How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?

Forget trying to use iCloud for this - it won't do what you want. iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.

Re: Running the same (Forte) application multiple times -for different

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I can use the same account on two computers?

I can use the same account on two computers?

You can use the same serial number on two computers, given the conditions in the end-user license agreement (You cannot have Lightroom using the same serial number in use on two computers at the same time, and both installations must be for your own personal use.)

The same delivery in two document for shipment

Similar Messages

Maybe you are looking for