The Scheduler has been shutdown .. Issue

Hi Guys ,
I am on OIM Websphere + OIM 9102 and when i am trying to save the task scheduler it throws the below excpetion .
Any idea ??
ERROR WebContainer : 4 XELLERATE.SCHEDULER - Class/Method: QuartzSchedulerImpl/isTaskAlreadyPresent encounter some problems: The Scheduler has been shutdown.
org.quartz.SchedulerException: The Scheduler has been shutdown.
at org.quartz.core.QuartzScheduler.validateState(QuartzScheduler.java:498)
at org.quartz.core.QuartzScheduler.getJobDetail(QuartzScheduler.java:1063)
at org.quartz.impl.StdScheduler.getJobDetail(StdScheduler.java:485)
at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.isTaskAlreadyPresent(Unknown Source)
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.initializeScheduler(Unknown Source)
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler(Unknown Source)
at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1146)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:592)
Thanks
Suren

Hi,
I am also getting the same error.
I have written a java code for scheduler and created a jar file which contains two classes and have put it into the Schedule Task Folder.
When i try to create the scheduler and save it, it throws the below error.
FATAL,21 Jun 2010 10:00:24,529,[SCHEDULER.WEBSTARTUP],Unable to start scheduler : com/sun/jndi/ldap/ctl/SortControl
ERROR,21 Jun 2010 10:00:28,521,[XELLERATE.SCHEDULER],Class/Method: QuartzSchedulerImpl/insertScheduledTask encounter some problems: The Scheduler has been shutdown.
org.quartz.SchedulerException: The Scheduler has been shutdown.
at org.quartz.core.QuartzScheduler.validateState(QuartzScheduler.java:498)
at org.quartz.core.QuartzScheduler.scheduleJob(QuartzScheduler.java:542)
at org.quartz.impl.StdScheduler.scheduleJob(StdScheduler.java:220)
at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.ejb.SchedulerControllerBean.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.beans.SchedulerControllerSession.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.beans.SchedulerController_z4f4d2_EOImpl.insertScheduledTask(SchedulerController_z4f4d2_EOImpl.java:76)
at com.thortech.xl.dataobj.tcTSK.insertSchedulerData(Unknown Source)
at com.thortech.xl.dataobj.tcTSK.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.databeansimpl.tcDataObjectBase.save(Unknown Source)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl.save(tcTSK_3hvicq_EOImpl.java:2003)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR,21 Jun 2010 10:00:28,521,[XELLERATE.SERVER],Class/Method: tcTSK/insertSchedulerData encounter some problems: The Scheduler has been shutdown.
com.thortech.xl.scheduler.exception.SchedulerGenericException: The Scheduler has been shutdown.
at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.ejb.SchedulerControllerBean.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.beans.SchedulerControllerSession.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.beans.SchedulerController_z4f4d2_EOImpl.insertScheduledTask(SchedulerController_z4f4d2_EOImpl.java:76)
at com.thortech.xl.dataobj.tcTSK.insertSchedulerData(Unknown Source)
at com.thortech.xl.dataobj.tcTSK.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.databeansimpl.tcDataObjectBase.save(Unknown Source)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl.save(tcTSK_3hvicq_EOImpl.java:2003)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by [Nested Exception]:
org.quartz.SchedulerException: The Scheduler has been shutdown.
at org.quartz.core.QuartzScheduler.validateState(QuartzScheduler.java:498)
at org.quartz.core.QuartzScheduler.scheduleJob(QuartzScheduler.java:542)
at org.quartz.impl.StdScheduler.scheduleJob(StdScheduler.java:220)
at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.ejb.SchedulerControllerBean.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.beans.SchedulerControllerSession.insertScheduledTask(Unknown Source)
at com.thortech.xl.scheduler.beans.SchedulerController_z4f4d2_EOImpl.insertScheduledTask(SchedulerController_z4f4d2_EOImpl.java:76)
at com.thortech.xl.dataobj.tcTSK.insertSchedulerData(Unknown Source)
at com.thortech.xl.dataobj.tcTSK.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.databeansimpl.tcDataObjectBase.save(Unknown Source)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl.save(tcTSK_3hvicq_EOImpl.java:2003)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR,21 Jun 2010 10:00:28,523,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
ERROR,21 Jun 2010 10:00:28,525,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.databeansimpl.tcDataObjectBase.save(Unknown Source)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl.save(tcTSK_3hvicq_EOImpl.java:2003)
at com.thortech.xl.ejb.beans.tcTSK_3hvicq_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I am giving the correct class name in the scheduler along with the correct package structure.
Please help if someone has found any solution over this.
Thanks.

Similar Messages

OIM 9102: the Scheduler has been shutdown

Hi,
I am updating the Ad connector task for groups lookup reconciliation after a fresh installation of the connector.
I get always this message: The Scheduler has been shutdown.
How can I get rid of this problem?
The connector works fine, I can provision the user in AD.
Thanks much.
09-09-29 12:21:28,812 ERROR [XELLERATE.SCHEDULER] Class/Method: QuartzSchedulerImpl/updateScheduledTask encounter some problems: The Scheduler has been shutdown.
org.quartz.SchedulerException: The Scheduler has been shutdown.
     at org.quartz.core.QuartzScheduler.validateState(QuartzScheduler.java:536)
     at org.quartz.core.QuartzScheduler.getJobDetail(QuartzScheduler.java:1162)
     at org.quartz.impl.StdScheduler.getJobDetail(StdScheduler.java:534)
     at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.updateScheduledTask(Unknown Source)
     at com.thortech.xl.scheduler.ejb.SchedulerControllerBean.updateScheduledTask(Unknown Source)
     at com.thortech.xl.scheduler.beans.SchedulerControllerSession.updateScheduledTask(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
     at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
     at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
     at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
     at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
     at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
     at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
     at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
     at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
     at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
     at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
..

thanks, the problem was a missing package required from the SJDS connector (which must be installed as required from the manual). The problem is that I first installed both connectors and then proceed with configuration of AD connector...
Regards.

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

I cannot cancel the goods issue because the delivery has been archived

Dear Gurus,
I have cancelled the MB1C goods receipt but I cannot cancel the goods issue because the delivery has been archived. Is it possible for you to fix this batch record any other way ?
Early resposne would be appreciated !
Thanks,
Rafiq

Dear Friends,
Can u please help me out of this issue
Thanks,
Rafiq

Allocation-"No scheduling has been performed for itemu201D

I am executing the automatic allocation scenario where I have to create a purchasing list using OAPC ( TA: WRFAPC01) when I assign material and I try to release the purchasing list .I get the erroru201D No scheduling has been performed for itemu201D kindly let me know how can I correct this issue .

Hi,
You can check whether the stock is available for the particular material.
If required quantity is not available then need you to add stock for that material...
Regards,
Sudha .

Error message: ni: A frame has been dropped and the acqusition has been canceled

I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
Reto

Hello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang

Every time I download anything I get an error message stating ...could not open ....dmg because it is either not a supported file type or the file has been damaged." What do I need to do to fix this problem?

For the last month or so, every time I download anything I get an error message stating "........could not open ...... .dmg because it is either not a supported file type or because the file has been damaged...." I do not know what to do to fix this issue. Any ideas?

hmmm.... try this
basic troubleshooting:
Repair Disk Permissions http://support.apple.com/kb/PH5821
Repair Disk http://support.apple.com/kb/ht1782
reset ACLs http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

How to get that the invoice has been printed or not?

Hi Experts,
I have a issue in Printing Invoice. I have to make 2 copies of an invoice. One is Original and another is Duplicate. I have made that with copy windows. But the requirement is that when the original copy of a selected invoice has been printed then from the second time only the duplicate copy will be printed. How to do that in ABAP? How to get the information that the invoice has been printed or not?
Regards,
SURYA

Hi Surya,
Try the below approach, i think this is better than the previous approach and takes care of the print from "text menu" as well
select from z table.
if sy-subrc eq 0.
call "SMARTFORM_COPY"
else.
While calling the smartform, make sure you import the "JOB_OUTPUT_INFO" parameter,
and after you call the smartform,
call "SMARTFORM_ORIG"
exporting...
Importing...
job_output_info = w_job_output_info
exceptions...
If sy-subrc eq 0.
if w_job_output_info EQ 'X'.
update the Z table.
else.
do not update the z table
endif.
endif.
endif.
Regards,
Chen

Mac won't open some files MasterPlan.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

I had this problem of not being able to open some files a couple of years ago and eventually was able to fix it but i can't remember how. Any help would be grateful.

The following document should help: Error: Adobe Reader could not open '*.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was not correctly decoded.)
Please update this thread if your issue is resolved.
Thanks,
Shashi

[APEX 3] Requested source data of the report has been modified

Hello APEX-Friends,
I have a common problem but the situation is a bit different here. Many of you might know the "invalid set of rows requested the source data of the report has been modified" problem. Often it occurs on submit. That means, you have a report, you select rows, you do things, you submit the page and everything blews up.
This is because you enter some values into fields the report depends on and so you modify your report parameters and the source data changes.
But:
In my case I have a dynamically created report that blews up before any submits occur or values change.
My query is a union of two selects. Both query different views. Those views use a date field as parameter and some compare functions.
I read the field with a V-Function i wrapped arround the apex V Function - declared as deterministic. My date compare function is also declared deterministic (I doubt this makes any differences as it might be only important for the optimizer, but as long as I don't know exactly what APEX evaluates, I go for sure).
I ensured, that the date field is set by default with the current date (and that works, because my interactive report initially displays correct data from the current date).
So everything is deterministic and the query must return same results on subsequent calls, but APEX still throws this "source data has changed" error and I am to 99.99% sure, that this cannot be true.
And now the awesome thing about this:
If I change the value of the date field, an javascript performs a submit. The page is reloaded (without resetting pagination!) and everything works fine. I can leave the page, reenter, do things - everything works well.
But if I log into the application and directly move to the corrupted report and try to use the pagination without editing fields or submitting the page the error occurs.
Do you have any Idea what's happing there? I could try to workaround this by submitting the page the first time it's entered to trigger this "mystery submit" that gets everything working. But I would like to understand this issue and have a clean solution.
Thanks in advance,
Mike aka UniversE

Okay, I found a solution, but I do not understand it - it might be a design flaw in APEX.
I mentioned the date field that is used in the query. I also mentioned that it is set with the current date by default. I did not mention how.
There are some possibilities in APEX to do so.
1. Default-Setting in the element properties
2. Static assignment if no value is in session cache
3. Computation before header
I did the first and second.
BUT:
An interactive report seems to work as follows. A query is executed to get all rows of the report. Then a second query is executed to get the rows that shall be displayed. And the order is screwed up, I think.
1. The first report query to get all rows
2. The elements are loaded and set to default values
3. The second report query to get the display rows
And that's the reason why nothing worked. Scince I added a computation before header the date field is set before the report queries are executed and everything works all fine now.
But I think it's a design flaw. Either both queries shall be executed before Regions or afterwards but not split as field values might change when elements are loaded.
Greetings,
UniversE

Solution - Battery error is detected. Irreparable damage to the battery has been detected. Replace

I own a T61 7658 I bough on 2008, it worked great with the default power settings until October 22nd I decided to change my power profile to MAXIMUM PERFORMANCE.
Next day I received on Message Center...
10/23/2010 - Battery health is critical. With the current system settings and a full charge, your battery can provide approximately 3.0 hours of use. A new battery could provide up to an estimated 5.5 hours.
I kept using the Laptop with the Max performance until...
11/12/2010 - Battery error is detected. Irreparable damage to the battery has been detected. Replace the battery with a new one.
I have used IBM/Lenovo for years and even had used batteries for 5 years without a single issue.
I have read many posts of people having the same problem not only with T61s, but many other Lenovo models, and also read posts of Lenovo's administrators suggesting this is normal and justifying that batteries should be good for at least 12 months and after that we are on own, basically meaning we should be thankful in name of our own safety that we had that battery protection and we must replace it at our own cost and forget about it. That is a very easy way out, isn’t it.
But certainly, not only batteries with more than 12 months are failing, even new batteries are and have been replaced with multiple exchange programs posted by Lenovo in their website just as in http://download.lenovo.com/lenovo/content/batt/082009/LandingPage.html. and also in multiple MIGR battery replacement campaigns available to all online as well.
Good thing here is that Lenovo has recognized the problem and has exchange the batteries still under warranty and also few of the batteries without warranty limiting to some serial numbers on the MIGR battery replacement campaigns, but the bad side is that Lenovo is leaving behind other clients like me and many others not being selected for replacement. But I’m sure we all have a good battery but turned useless due to the Lenovo programmed safety temperature limits in the power manager and the battery board. Please let me explain.
This is my conclusion. There is nothing wrong with used or new batteries or their cells in 99% of the cases, I'm sure my battery is okay although is being turned useless by the battery protection feature on my T61.
Lenovo must recognize the problem is the settings they have programmed on the power manager and battery protection board. It is very understandable that when users select a Power Scheme that demands higher amounts of power to generate better performance on the system this also demand additional power generating heat on battery and on the power supply as the computer is running at full performance, just as happens on my ipod when watching video, or in my kid’s R/C truck when running continuously and will happen with any other battery powered device.
Therefore any scheme requiring performance is generating heat and is tripping the battery protection and this is not a client’s fault, as are we just using an available scheme provided on our Lenovo system. If the battery protection is not calibrated to support this power demand, then there is a poor design/testing of the capabilities of the system and the battery protection parameters that instruct the battery to save itself from a fire or burning … which is understandable.
The bad side is that there is not possible reset option for the end users, the only option is to buy a new battery at our own cost after the 12 months of warranty, when the cause of the problem is originated in the computer system design settings and can happen at any time, that is way, the system warned me, as in:
10/23/2010 - Battery health is critical. With the current system settings and a full charge, your battery can provide approximately 3.0 hours of use. A new battery could provide up to an estimated 5.5 hours.
The computer is saying! At maximum performance, You are using too much power, and my battery will last just 3 hrs (9 cells on my system) instead of the 5.5 hrs that should last. But not only the running time was reduced, the heat on the power supply system and Battery was also increased due to the higher power demand, the battery can not handle the demand and protect itself to prevent fire or damage.
So who has to pay for this? Can Lenovo do something about it? For us client and for future clients? This not a matter of having or not having warranty, this can happen at any time in any computer.
I'm writing this hoping to be heard and supported and I hope LENOVO provides a satisfactory solution to the issue. I'm not going to say will never buy Lenovo again I already did, I invested my money on Lenovo and with warranty or not I'm looking forward to get a decent response.
Lenovo must change the parameters for tripping battery protection probably handled at BIOS level, and to provide a reset feature to all "locked" batteries there is many people that has lost at least one battery, some other more than that.  Since even if we get a replacement, the chances  the issue will continue is there, as long as I select a high power demand scheme the problem sooner or later will be back.   Even car makers support their clients beyond the warranty if they detect that the issue compromises safety and their reputation.  Fix it.
M.Padron.

amtho, welcome to the forum,
start by looking at this site and also look at this site which is actually linked to from the first one.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:

Dear Friend
I have got below error message in the exchagne server 2013 while i tried to open the console of delegation mailbox . It was comes once i was deploy lync server 2013 in the same forest.
warning
The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control entry defines the ObjectType 'd819615a-3b9b-4738-b47e-f1bd8ee3aea4' that can't be resolved..
The access control entry defines the ObjectType 'e2d6986b-2c7f-4cda-9851-d5b5f3fb6706' that can't be resolved..
If you feel to ask to more clarification, please let me know.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Based on the description, you got warnings when you tried to click the mailbox delegation option of mailbox properties in EAC. Is it right?
Did this issue affected only one user mailbox or all of them?
From the error message, it seems that this issue is related to the corrupt permissions. Please use the
Get-MailboxPermission cmdlet to retrieve permissions on a mailbox to check result.
Best regards,
Belinda Ma
TechNet Community Support

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

I cannot "scan to computer" with my HP Officejet Pro 8600 N911g ) - The option has been enabled

I cannot "Scan to Computer" with my HP OfficeJet Pro 8600 N911g - The option has been enable in the HP Utility - but I receive a communication error message - I'm connected to the computer using a Linksys Wireless Router and I am using OS X 10.5.8 - I can print wirelesly and I can use Web Scan, so the connection is good.
How do I resolve the issue?

petergole,
To make sure we aren't dealing with a software problem lets try to uninstall with the 'scrubber option' like this:
1. Go to Applications/Hewlett Packard/ click on HP Uninstaller and click Continue
2. Highlight your device on the left pane
3. Hold the Ctrl, Opt and Cmd keys and click on Uninstall
4. There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
5. Click Continue and let it finish
Now, run a Software Update. This can be done by clicking the Apple in the top left of the screen then clicking Software Updates.
Next, let's reset the printing system:
Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Default tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Finally, use this guide to reinstall: http://goo.gl/Na4Qm
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

One song on my iPhone only plays the background music on the build-in iPhone speakers. The song has been on my phone for a while and it used to play just fine. With the headphones on it plays normally.

Please help! (I'm actually doing this for a friend but still)
All you need to know:
- iPhone 4 16GB
- iOS 6.0.3 (I think, not the latest iOS but the one before that)
- Song which started to act strange: niggas in Paris
- All songs work fine on headphones (including above)
- The song has been on the iPhone for a couple of months and used to play without any trouble
- When you play it on the iPhone's speakers you either only hear the background music, no sound at all (for a few seconds) or a weird old FM-radio noise
- Plays fine on iTunes
All help is appreciated!
Thanks.

I have this issue too. Same specs, newest OS. Happening on "O.N.E." by Yeasayer, but doesn't play the vocals through the speaker or headphone jack, unlike your issue. I just get all but the vocal track no matter what. Plays fine in iTunes. If you never get that distortion through the speaker any other time, maybe you can delete the song.
In my case, I can't delete the song through the phone since I use iTunes Match, but if you actually sync the songs/download them, that would be my first suggestion (swipe across, hit "delete."). Maybe that would work? Then resyncing or redownloading.
If not, maybe resetting or restoring may be the fix.

The Scheduler has been shutdown .. Issue

Similar Messages

Maybe you are looking for