The specified Brick has reported multiple excessive load conditions during read or write, indicating a problem with the Brick. If the problem continues

I want to know what is the reason for this alarm. and is it hardware or software issue.

I want to know what is the reason for this alarm. and is it hardware or software issue.

Similar Messages

  • How do I make Read and Write 10 Gold work with Firefox? I have the latest Firefox 10.0.1 but it keeps saying "Please upgrade your version of Mozilla Firefox. The minimum version supported by Read&Write is version 3.0."

    I just loaded Moxilla Firefox on my Windows 7 PC today and tried to use my Read and Write 10 Gold text help software but it just does not seem to work with this browser (works fine on Internet Explorer) as it keeps saying "Please upgrade your version of Mozilla Firefox.
    The minimum version supported by Read&Write is version 3.0." but this versions is higher than 3.0!

    We have a solution available for anyone needing to run Firefox 10 with Read&Write v10 Gold, please email us directly for this temporary resolution- [email protected]

  • Need a Crystal Report formula to concatenate strings during reading records

    I have a report that takes partnumbers and cross references them with other partnumbers.
    I have this information in the details
    Partnumber   XRef                          I need this as the string
    A                  B                              B
    A                  C                              B,C
    A                  D                              B,C,D
    And then start the a new string when it gets to a new partnumber.  Does anyone know how to do this?
    Thanks
    siboyd

    Hi,
    please create a formula field named "MySharedVariableTestGroupHeader" with the following code:
    shared StringVar mySharedVar := "Start";
    Then create a second formula field named "MySharedVariableTestDetails" with the following code:
    shared StringVar mySharedVar;
    mySharedVar := mySharedVar + " Next ";
    Now create a thrid formula field named "MySharedVariableTestGroupFoot" with the following code:
    shared StringVar mySharedVar;
    mySharedVar;
    Insert the newly created formula fileds in your report as follows:
    MySharedVariableTestGroupHeader -> Group header section
    MySharedVariableTestDetails -> Details section
    MySharedVariableTestGroupFoot -> Group footer section
    Watch what is displayed in your group footer.
    I hope I am able to give you an idea about what you can do by using shared variables in Crystal Reports.
    Regards,
    Stratos

  • Urgent: Please help. how to solve the time delay during buffer read and write using vc++

    I need to continuously acquire data from daqmx card, write into a file and at the same time corelate (in terms of time) the data with signals from other instruments. The current problem is that there is time delay during read and write data into buffer,thus causing misalignment of the data from multiple instruments. Is there a way to solve  the delay? or Is there a way to mark the time of the data acquisition in the buffer?  If I know the starting time (e.g. 0) of data acquisition and sampling rate (e.g. 1kHz), can I simply add 1ms to each data sample in the buffer? The current code is shown below.
    void DataCollectionWin::ConnectDAQ()
    DAQmxErrChk(DAQmxCreateTask ("", &taskHandle));
        DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0,Dev1/ai1,Dev1/ai2,Dev1/ai3,Dev1/ai4,Dev1/ai5,Dev1/ai16,Dev1/ai17,Dev1/ai18,Dev1/ai19,Dev1/ai20,Dev1/ai21,Dev1/ai6,Dev1/ai7,Dev1/ai22","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
      DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandle,"",1000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,60000));
      DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,50,0,EveryNCallback,NULL));// Every 50 samples the EveryNSamplesEvent will be trigured, to reduce time delay.
      DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,NULL));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
    int32 CVICALLBACK EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void *callbackData)
     DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,50,10.0,DAQmx_Val_GroupByScanNumber,data,50*15,&read,NULL));
       //memcpy(l_data,data,6000);
      SetEvent(hEvent);
    l_usstatus_e[0]=g_usstatus[0];// signals from other instruments that need to be corelated with the data from daq cards.
     l_optstatus_e[0]=g_optstatus[0];
     if( read>0 ) // write data into file
       //indicator=1;
     for (i=0;i<read;i++)
     {  //fprintf(datafile,"%d\t",i);
      fprintf(datafile,"%c\t",l_usstatus_s[0]);
      fprintf(datafile,"%c\t",l_usstatus_e[0]);
            fprintf(datafile,"%c\t",l_optstatus_s[0]);
      fprintf(datafile,"%c\t",l_optstatus_e[0]);
              fprintf(datafile,"%.2f\t",data[15*i]);
     //   sprintf( pszTemp, "%f", data[6*i]);
     // pListCtrl->SetItemText(0, 2, pszTemp);
        //pWnd->m_trackinglist.SetItemText(0, 2, pszTemp);
         fprintf(datafile,"%.2f\t",data[15*i+1]);
         fprintf(datafile,"%.2f\t",data[15*i+2]);

    Hello kgy,
    It is a bit of a judgment call. You should just choose the board that you think has the most to do with your issue. For example, this issue was much more focused on setting up your data acquisition task than the Measurement Studio environment/tools, so the MultifunctionDAQ board would have been the best place for it. As for moving your post to another board, I do not believe that is possible.
    Regards,
    Dan King

  • Attempted to read or write protected memory in VS2010 when i click the prin

    hi
    i can see the report in the Crystal Report Viewer
    but when i click on the print button i am geting this error message :
    Crystal Report Viewer printing error
    (Attempted to read or write protected memory. This is often an indication that other memory is corrupt).
    in some computers it working fine but in some i get this meesage
    the problem is when i click the print button
    maybe in x64 windows 7 pc the crystal report x64 is installed and the x86 install also the problem occur
    i dont know what to do
    i need solution
    thanks ...

    OS  Wind 7  32 bit
    VS  2010 
    SAP crystal  for  2010  net
    i  search about this  problem  but i don't see any  solution

  • Using the Borland Database Engine to read AND write SHARED Paradox Database Tables

    I need to read and write Paradox database tables with a C# AT THE SAME TIME AS people using the Paradox tables with legacy Paradox programs interactively.
    I think the only way to do that reliably without corrupting the tables is to use the BDE Borland Database Engine.
    Does anyone know how to do that? I found this c++ program... But I don't know how to integrate this into c#
    http://www.codeproject.com/KB/database/bdedatabase.aspx
    Is there another way to do this? Again, most important, I don't want to corrupt the paradox database.
    I can read the paradox records all day long, that is no problem, it is updating at the same time as the legacy program users..
    I also know that the whole thing needs to be updated, but that can not be done overnight.
    Thanks in advance
    Dave

    Being pretty new to programming, I am trying just to read info from Paradox tables with C#. Info is actively being updated from another program at the same time. The program I am trying to write only needs to read data. The other program does use the BDE,
    so it is already present running on the computer.
    I've been looking at code but just haven't found quite the right combination.
    Thanks. Any help is greatly appreciated.

  • How to run the same SSRS report multiple times, each time with a different parameter value?

    Hi,
    I have an SSRS report that produces a list of invoices for a single supplier (so supplier is a parameter specified at runtime). The report is based on a stored procedure in SQL. I would like to make things easier and instead of going through all suppliers
    one by one, I want to have a single action, which produces separate reports, per supplier, for all suppliers that have an outstanding invoice (so not all suppliers on the system as a whole but all suppliers that are within the result set of the stored procedure).
    I assume this would mean first executing the stored procedure to find all suppliers that have invoices at the time. And then running the report multiple times, once for each supplier, where the supplier value is used as the parameter every time. ideally
    this would open separate webpages with a single report per page. (I am creating a button in another software, which is simply launching iexplore.exe and passing a
    fixed SSRS report URL).
    What would be required? I have SQL 2012 and I am building this in Report Builder 3.0.
    Thank you!
    Dimitar
    P.S. What about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?

    What
    about still running ONE report, but every supplier starting on a new page? Is that more realistic? So supplier will not be a parameter any more, but just something that creates a new page on the report?
    Yes thats a much better option. Its very easy to generate such a report in SSRS. You dont need a parameter
    in that case but just needs to add Supplier as a grouping field in the tablix. Then add other columns and groups if required. Select option set page break after each instance of the group for first grouping (ie based on supplier field). Then report will render
    with one page per supplier. On exporting to excel also each supplier data goes to a different tab
    Here's a similar requirement I did for one of my projects
    http://visakhm.blogspot.in/2013/10/using-ssrs-to-export-sqlserver-data-to.html
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • The specified cache entry could not be loaded during initialization

    The OBIEE server is failing every few minutes of working.
    I saw in the NQServer.log:
    The specified cache entry could not be loaded during initialization.
    Cache entry, '/home/oracleadmin/OracleBIData/cache/NQS_rprt_734086_39693_00000001.TBL', is invlaid due to either non-existing file name, size does not match, exceeding maximum space limit nor exceeding maximum entry limit, and it's been removed.
    I checked the directory and there is no space limitation.
    Can someone please clarify?
    The server/Config/NQSConfig.INI is as follows:
    [ CACHE ]
    ENABLE = YES;
    DATA_STORAGE_PATHS = "/home/oraceladmin/OracleBIData/cache" 2000 MB;
    MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
    MAX_CACHE_ENTRY_SIZE = 1 MB;
    MAX_CACHE_ENTRIES = 1000;
    POPULATE_AGGREGATE_ROLLUP_HITS = NO;
    USE_ADVANCED_HIT_DETECTION = NO;
    MAX_SUBEXPR_SEARCH_DEPTH = 7;

    It's more than enough if you are using it for .tmp and .tbl files storage. Have you checked work_directory_path in NQSConfig.ini file .Is it on diffrent mount point.Usually we wil create a seperate mount point and use that as storage location.
    b. Instead of using SAPurgeAllCache() , can I add shell script which delete the files fromt the cache directory and the execute run-sa.sh?You need to understand diffrence between OBIEE rpd cache and .tbl and .tmp file. SAPurgeAllCache() will purge cache from RPD.It wont purge .tmp or .tbl files.These files will be stored in some physical location.When a report start executing .tmp file will start evoluting and after execution of report it will be purged by OBIEE server automatically.
    see this blog for some insight into this topic
    Re: TMP Files uneder /OracleBIData/tmp
    Regards,
    Sandeep

  • Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in  Micro soft tech net.

    Device not detected
    My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in  Micro soft tech net. Still the problem has not been solved

    Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
    Sorry for the multiple posts

  • How to see, if some user has done multiple login at the same time

    Hi,
    i'm looking for a tcode to see, if some user has done multiple login in a date-range.
    Regards, Dieter

    It is also dependent on your license type, as it is populated at logon - prior to any Z-coding option - which will cause a lockout if attempted an access that way.
    I recently found a cool way to detect DB triggers and updates - very obscure...
    However I also "move around" during support in projects and don't always want to kick myself out. I guess SAP can "work-it-out" from the various fields of the table to map the user behaviour.
    Personally I dont believe that all of such information is appropriate for public domain, as all the SAP_ALLers out there combined with the types of authentication options are not always responsible with the information either.
    Thankfully, SAP has added a "salt" to the password hashes now. They offer RZ11 login/password_downwards_compatibility as a workaround...
    Take a look in your system!
    Cheers,
    Julius

  • I have an iPad that has one app that loads to only 72%. Apple tells me that the app is no longer available in canada but it has content that I paid for. How do I get the app to work again?

    I have an iPad that has one app that loads to only 72%. Apple tells me that the app is no longer available in canada but it has content that I paid for. How do I get the app to work again?

    If it's not available in your country and you do not have a copy of it in iTunes backed up on your computer, you don't.

  • What is the difference of specifying affinity to span multiple caches?

    What is the difference of methods between specifying affinity to span multiple caches and specifying it on a single cache?
    Can I do it in the same way?

    Thank you for reply.
    From the Docs of Coherence we can see that the data affinity is commonly referred to the related entries is contained within a single cache. The following is some fragmentss excerpted from Coherence Docs:
    "Data affinity describes the concept of ensuring that a group of related cache entries is contained within a single cache partition. This ensures that all relevant data is managed on a single primary cache node (without compromising fault-tolerance)."
    "Affinity may span multiple caches (as long as they are managed by the same cache service, which will generally be the case)."

  • Apple has reportedly delayed the release of iOS 5.0.2

    Apple has reportedly delayed the release of iOS 5.0.2, German-language technology blog Macerkopf.de said on Monday. Rumors surfaced last week suggesting that Apple was preparing to release the update, which is expected to address poor battery life with iOS 5, out of the door before the end of this week. Macerkopf.de said iOS 5.0.2 has been delayed to fix “address-based memory leaks,” or bugs that cause apps to consume memory without releasing resources once they are no longer needed. A new release date for iOS 5.0.2 has reportedly not yet been scheduled.

    I saw  it when i searching the web again today Apple has reportedly delayed the release of iOS 5.0.2

  • HT202450 If the issue is reported multiple times, is it still covered?

    If the issue is reported multiple times, is it still covered?

    Security Software and Related Troubles
    http://support.apple.com/kb/TS3125          Basic Troubleshooting
    http://support.apple.com/kb/TS3297          Advance Troubleshooting
    http://support.apple.com/kb/ts1629          Ports List
    Basics
    Check correct date, time, and timezone.
    Log in as administrative user account
    Verifiy iTunes updated
    Update Operating System “OS” (Ms Windows, Mac OSX)
    Update Modem / Router firmware
    Update security software (Antivirus, Firewall)
    Remove Outdated Security Software (Always restart afterwards)
    Advanced
    Remove Mobile Software not used anymore
    (Motorola, Android, Nokia, Sony, Blackberry)
    Add Apple programs to firewall permissions
    Allow Ports 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999
    Permit Domains - apple.com , edgesuite.net , mzstatic.com
    Disable Security Software
    Remove Security Software (restart!)
    Delete “Hosts” file and restart, or edit and save.
    Check Browser Settings: Use SSL3, TLS1, Auto Detect, No Proxy Settings
    Reinstall itunes FOLLOWING ARTICLE while all security off / disabled or completely removed.
    http://support.apple.com/kb/HT1923
    http://support.apple.com/kb/HT1925

  • "The WmiSE service has reported an invalid current state 0." error continuouls fatched on server 2008 R2.

    hello support,
    i am using window server 2008 R2 as a web server.i saw error "The WmiSE service has reported an invalid current state 0." in system logs of event viewer, and also continuosly fatched.i want to know why it gives such kind of error and how i can
    solve it.

    Hi,
    Based on your description, I guess that you get Event ID 7016. For this Event,
    If a service is not coded correctly to appropriately handle control calls from the Service Control Manager (SCM), the SCM may log this event -- with a invalid current state value of zero (0). For more details, please refer to following article and
    check if can help you.
    Event ID 7016 — Basic Service Operations
    If anything I misunderstand or any update, please don't hesitate to let me know.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for