"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7

I am having problems where all my Windows 2003 servers cannot rpc to 2 of my Windows 7 workstations, error message is "The specified server cannot perform the requested operation".
All the machines are in workgroup environment.
Windows 7 workstations: desk1, desk2, desk3, desk4, desk5, desk6
Windows 2003 servers: server1, server2, server3, server4, server5
Windows 2008 server: server6
From any Windows 7 workstation I can rpc to any other machines,
\\desk1\d$, no problem
From any Windows 2003 server I can rpc to all the machines exception desk4 and desk5, they give the "The specified server cannot perform the requested operation". However, desk4 and desk5 can rpc to any other machines (including the Windows 2003
servers), no problem
From Windows 2008 rpc to desk4 and desk5 also no problem.
I also have no problem rpc between any of the Windows 2003 servers,
\\server2\d$ from server3, no problem.
I turned off the firewall at desk5 and desk4, just to try, but didn't help, same problem. This show firewall is not the cause of the problem.
Desk4 and Desk5 used to run Windows 2012 for 1 year and recently I downgraded them Windows 7 Professional x64. When they were running as Windows 2012, those Windows 2003 servers have no problem rpc to desk5 and desk4.
The issue is thus lying between desk4 and desk5 with Windows 2003 only\
Any suggestions?
Valuable skills are not learned, learned skills aren't valuable.

Hi,
I found a related thread and a hotfix for similar issue:
Problems Accessing Administrative Shares Remotely - Windows cannot access \\Servername\ShareName
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9807a799-bea3-46ad-92a5-732779135f98/problems-accessing-administrative-shares-remotely-windows-cannot-access-servernamesharename?forum=winserver8gen
You cannot access an administrative share on a computer after you set the SrvsvcDefaultShareInfo registry entry to configure the default share permissions for a network share
https://support.microsoft.com/kb/971277/en-us
Also please check if it is caused by security program such as antivirus program.
If you have any feedback on our support, please send to [email protected]

Similar Messages

Error 58 The specified server cannot perform the requested operation

Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?

Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Cannot perform cube view operation, null

Hi There,
Users use SmartView connect to the 11.1.1.3 cube, but get the following error:
"Cannot perform cube view operation, null"
Any advice?
Thanks

It is a stupid meanless message for the real issues. The users have suppress missing turned on on an intinal retrieve and nothing is returned. Turn off suppress missing in the options and the users should be fine.

Weblogic.management.NoAccessRuntimeException: Cannot perform the requested

Hi,
I am using WLES 4.2 with WebLogic 8.1 SP4 Portal domain.
Managed Servers are not running, Admin server starts normally, when i try to access WebLogic Admin Console i get below exception. Any idea what could be the root cause?????
weblogic.management.NoAccessRuntimeException: Cannot perform the requested operation, the request was from an anonymous user (Principal)
at weblogic.management.mbeans.custom.Cluster.getServers(Cluster.java:76)
at sun.reflect.GeneratedMethodAccessor37.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.getAttribute(DynamicMBeanImpl.java:604)
at weblogic.management.internal.ConfigurationMBeanImpl.getAttribute(ConfigurationMBeanImpl.java:179)
at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1186)
at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1156)
at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:288)
at weblogic.management.internal.MBeanProxy.getAttribute(MBeanProxy.java:610)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:442)
at weblogic.management.configuration.ClusterMBean_Stub.getServers(ClusterMBean_Stub.java:1168)
at weblogic.management.console.utils.MBeans.getServersFor(MBeans.java:692)
at weblogic.management.console.webapp._domain.__nav._jspService(__nav.java:1507)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:322)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:150)
at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:173)
at weblogic.management.console.actions.internal.ActionServlet.doGet(ActionServlet.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>

Did you ever find resolution to this? We are encountering the listed exception every 10 minutes in the logs and have yet to identify the source.

Why am I getting ExchangeWebServices Inbox Error: Error, ErrorServerBusy. The server cannot service this request right now. Try again later

I recently switched my application that uses EWS from an on-premise Exchange Server to Exchage Online through Office356.
The process worked just fine for several days, then I started getting the following errors;
Error accessing [USERNAME] email account.; ExchangeWebServices Inbox Error: Error, ErrorServerBusy, The server cannot service this request right now. Try again later. -->
This has been happening for the past 14 hours now.
I contacted my Office365 support team and they acted like they had never heard of the Exchange Web Services API, so no help there.
I can access the mailbox using the O365 web portal and I can access the mailbox account using the Outlook 2013 desktop client. The issue seems specific to EWS
My program is a Windows service, written in VB.Net. It connects to EWS, goes to the user account inbox, iterates through the inbox extracting attachments from messages, then moves the messages to a saved folder below the inbox.
I created the wrapper for EWS that I can reference in my project code using the following, run from an elevated VS2012 command prompt;
wsdl.exe /namespace:ExchangeWebServices /out:EWS.cs https://outlook.office365.com/ews/services.wsdl /username:[email protected] /password:p@ssw0rd
csc /out:EWS_E2K13_release /target:library EWS.cs
I bind to EWS in my class, using the following code;
Imports System.Net
Imports ExchangeWebServices
Public Class Exchange2013WebServiceClass
Private ExchangeBinding As New ExchangeServiceBinding
Public Sub New(ByVal userEmail As String, ByVal userPassword As String, ByVal URL As String)
ExchangeBinding.Credentials = New NetworkCredential(userEmail, userPassword)
ExchangeBinding.Url = URL
End Sub
The error that is logged gets triggered when my code makes a call to the following method;
Public Function GetInboxMessageIDs() As ArrayOfRealItemsType
Dim returnInboxMessageIds As ArrayOfRealItemsType = Nothing
Dim errMsg As String = String.Empty
'Create the request and specify the travesal type.
Dim FindItemRequest As FindItemType
FindItemRequest = New FindItemType
FindItemRequest.Traversal = ItemQueryTraversalType.Shallow
'Define which item properties are returned in the response.
Dim ItemProperties As ItemResponseShapeType
ItemProperties = New ItemResponseShapeType
ItemProperties.BaseShape = DefaultShapeNamesType.IdOnly
'Add properties shape to the request.
FindItemRequest.ItemShape = ItemProperties
'Identify which folders to search to find items.
Dim FolderIDArray(0) As DistinguishedFolderIdType
FolderIDArray(0) = New DistinguishedFolderIdType
FolderIDArray(0).Id = DistinguishedFolderIdNameType.inbox
'Add folders to the request.
FindItemRequest.ParentFolderIds = FolderIDArray
Try
'Send the request and get the response.
Dim FindItemResponse As FindItemResponseType
FindItemResponse = ExchangeBinding.FindItem(FindItemRequest)
'Get the response messages.
Dim ResponseMessage As ResponseMessageType()
ResponseMessage = FindItemResponse.ResponseMessages.Items
Dim FindItemResponseMessage As FindItemResponseMessageType
If ResponseMessage(0).ResponseClass = ResponseClassType.Success Then
FindItemResponseMessage = ResponseMessage(0)
returnInboxMessageIds = FindItemResponseMessage.RootFolder.Item
Else
'' Server error
Dim responseClassStr As String = [Enum].GetName(GetType(ExchangeWebServices.ResponseClassType), ResponseMessage(0).ResponseClass).ToString
Dim responseCodeStr As String = [Enum].GetName(GetType(ExchangeWebServices.ResponseCodeType), ResponseMessage(0).ResponseCode).ToString
Dim messageTextStr As String = ResponseMessage(0).MessageText.ToString
Dim thisErrMsg As String = String.Format("ExchangeWebServices Inbox Error: {0}, {1}, {2}", responseClassStr, responseCodeStr, messageTextStr)
errMsg = If(errMsg.Equals(String.Empty), String.Empty, errMsg & "; ") & thisErrMsg
End If
Catch ex As Exception
'errMsg = String.Join("; ", errMsg, ex.Message)
errMsg = If(errMsg.Equals(String.Empty), String.Empty, errMsg & "; ") & ex.Message
End Try
If Not errMsg.Equals(String.Empty) Then
returnInboxMessageIds = Nothing
Throw New System.Exception(errMsg)
End If
Return returnInboxMessageIds
End Function
Since the code worked just fine for several days and then suddenly stopped working with a server busy error, I have to think that this is some type of limit or throttling by EWS on the account. I process several thousand emails per day, in chunks of 300
at a time.
But I have no idea how to check for any limits exceeded. I am nowhere close to my O365 mailbox size limit. Right now, there are over 4,000 messages in my inbox, and growing.
Thanks in advance for any ideas you can offer.
Dave

All the API's EWS, MAPI, ActiveSync,Remote powershell are throttled on Office365 (based around what 1 particular user could resonably do). If you have had a read of this already i would recommend
http://msdn.microsoft.com/en-us/library/office/jj945066(v=exchg.150).aspx
You can't adjust or even find your current throttle usage so you have to try to design your code around living inside the default limits. If your using One Service Account to access multiple Mailboxes (or if that account is because used across multiple
applications) that can cause problems. In this case using EWS Impersonation is good solution as described in
http://blogs.msdn.com/b/exchangedev/archive/2012/04/19/more-throttling-changes-for-exchange-online.aspx (this basically means the Target Mailbox is charged instead of the Service Account).
Looking at the code one thing I notice missing is your don't appear to be paging the results of FindItems, also have versioned your requests to Exchagne2013. eg ". When the value of the
RequestServerVersion element indicates Exchange 2010 or an earlier version of Exchange, the server sends a failure response with error code
ErrorServerBusy. If the value of the RequestServerVersion
element indicates a version of Exchange starting with Exchange 2010 SP1
or Exchange Online, and the client is using paging, EWS may return a
partial result set instead of an error"
To Page FindItems Correctly you should use the IndexedPageViewType class and page the Items at no more the 1000 at a time eg something like
IndexedPageViewType indexedPageView = new IndexedPageViewType();
indexedPageView.BasePoint = IndexBasePointType.Beginning;
indexedPageView.Offset = 0;
indexedPageView.MaxEntriesReturned = 1000;
indexedPageView.MaxEntriesReturnedSpecified = true;
FindItemType findItemrequest = new FindItemType();
findItemrequest.Item = indexedPageView;
findItemrequest.ItemShape = new ItemResponseShapeType();
findItemrequest.ItemShape.BaseShape = DefaultShapeNamesType.IdOnly;
BasePathToElementType[] beAdditionproperties = new BasePathToElementType[3];
PathToUnindexedFieldType SubjectField = new PathToUnindexedFieldType();
SubjectField.FieldURI = UnindexedFieldURIType.itemSubject;
beAdditionproperties[0] = SubjectField;
PathToUnindexedFieldType RcvdTime = new PathToUnindexedFieldType();
RcvdTime.FieldURI = UnindexedFieldURIType.itemDateTimeReceived;
beAdditionproperties[1] = RcvdTime;
PathToUnindexedFieldType ReadStatus = new PathToUnindexedFieldType();
ReadStatus.FieldURI = UnindexedFieldURIType.messageIsRead;
beAdditionproperties[2] = ReadStatus;
findItemrequest.ItemShape.AdditionalProperties = beAdditionproperties;
DistinguishedFolderIdType[] faFolderIDArray = new DistinguishedFolderIdType[1];
faFolderIDArray[0] = new DistinguishedFolderIdType();
faFolderIDArray[0].Mailbox = new EmailAddressType();
faFolderIDArray[0].Mailbox.EmailAddress = "[email protected]";
faFolderIDArray[0].Id = DistinguishedFolderIdNameType.inbox;
bool moreAvailible = false;
findItemrequest.ParentFolderIds = faFolderIDArray;
int loopCount = 0;
do
FindItemResponseType frFindItemResponse = esb.FindItem(findItemrequest);
if (frFindItemResponse.ResponseMessages.Items[0].ResponseClass == ResponseClassType.Success)
foreach (FindItemResponseMessageType firmtMessage in frFindItemResponse.ResponseMessages.Items)
Console.WriteLine("Number of Items retreived : " + ((ArrayOfRealItemsType)firmtMessage.RootFolder.Item).Items.Length);
if (firmtMessage.RootFolder.IncludesLastItemInRange == false)
moreAvailible = true;
else
moreAvailible = false;
((IndexedPageViewType)findItemrequest.Item).Offset += ((ArrayOfRealItemsType)firmtMessage.RootFolder.Item).Items.Length;
Console.WriteLine("Offset : " + ((IndexedPageViewType)findItemrequest.Item).Offset);
if (firmtMessage.RootFolder.TotalItemsInView > 0)
foreach (ItemType miMailboxItem in ((ArrayOfRealItemsType)firmtMessage.RootFolder.Item).Items)
Console.WriteLine(miMailboxItem.Subject);
else
throw new Exception("error " + frFindItemResponse.ResponseMessages.Items[0].MessageText);
} while (moreAvailible);
The support people should be able to help you as long as you can get past the first level. The EWS Managed API has a RequestId header that gets submitted with requests
http://blogs.msdn.com/b/exchangedev/archive/2012/06/18/exchange-web-services-managed-api-1-2-1-now-released.aspx . In theory they should be able to take this and then from the Logs tell more information about why your request failed etc.
Cheers
Glen

Error:The server cannot service the request because the media type is unsupported

Hi Experts,
I have configured one IDOC to web service synchronous scenario in SAP PI 7.31 using BPM. In the webservice response step of BPM we are getting the below error.
The server cannot service the request because the media type is unsupported.
Could you please assist?

Send the same xml from SOAP UI to test the webservice. If you get the similar response, you should check with your service provider on what is the expected content/format.
May be you might have to change the content type before sending the message to webservice.

EWS The server cannot service this request right now. Try again later.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
Hi,
I do have a problem that Exchange 2013 CU7 is giving mit a "The server cannot service this request right now. Try again later." when trying to access some accounts using EWS and impersonation.
I know there might be throttling involved and for that I did make an separate policy and assigned it to the users (EWS andthe mailbox - just in case...)
Here is what I got from the EWS logs:
.007Z,f973ffeb-b1fa-4946-a9b4-acb047ea1b37,15,0,1044,21,,NTLM,true,[email protected],domain,ExchangeServicesClient/0.0.0.0,Target=None;Req=Exchange2007_SP1/Exchange2007_SP1;,192.168.0.100,EWS15MB1,EWS15MB3.domain,FindItem,200,1041,,ErrorServerBusy,[email protected],,,cc91dc21f4c542acb64f196ec47ae727,c314fd38-a24e-4bcb-992e-e009c7adcb4e,PrimaryServer,LocalTask,0,1,0,1,0,0,1,0,0,,,,,,,,,0
Max,0 Max,,,,EWS_BO,0.1067,[C],0,0,10,390,,,5,0,,6,15,695,713,,,BackEndAuthenticator=WindowsAuthenticator;TotalBERehydrationModuleLatency=0;AuthzFlags=AuthzSkipTokenGroups;FindItemQueryFilter=(True);AQS=False;MailboxTypeCacheSize=2039;S:WLM.Cl=InternalMaintenance;S:ServiceTaskMetadata.ADCount=0;S:WLM.Type=Ews;S:FCI.MBXT=Primary;S:ServiceTaskMetadata.ADLatency=0;S:WLM.Int=True;S:FCI.QS=;S:ServiceTaskMetadata.RpcCount=10;S:ServiceTaskMetadata.RpcLatency=420;S:WLM.SvcA=False;S:FCI.VF=All;S:ServiceTaskMetadata.WatsonReportCount=0;S:ServiceTaskMetadata.ServiceCommandBegin=16;S:ServiceTaskMetadata.ServiceCommandEnd=711;S:ActivityStandardMetadata.Component=Ews;S:WLM.BT=Ews;S:BudgetMetadata.MaxConn=Unlimited;S:BudgetMetadata.MaxBurst=Unlimited;S:BudgetMetadata.BeginBalance=$null;S:BudgetMetadata.Cutoff=Unlimited;S:BudgetMetadata.RechargeRate=Unlimited;S:BudgetMetadata.IsServiceAct=False;S:BudgetMetadata.LiveTime=00:00:00.2343945;S:BudgetMetadata.EndBalance=$null;S:FCI.CVT=689;S:FCI.CSIT=70;S:FCI.CSIC=0;S:FCI.CSIQ=2;S:FCI.CSISTC=2;S:FCI.CSIG=54;S:FCI.CRIT=613;S:FCI.CRIC=340;S:FCI.CRIQ=2;S:FCI.CRIG=381;S:FCI.CRIET=0;S:FCI.CRINI=160;S:FCI.CRIMBT=0;S:FCI.CRIMET=7;S:FCI.CRIMP=0;S:FCI.CRIMAR=37;S:FCI.CVU=False;Dbl:WLM.TS=713;Dbl:BudgUse.T[]=715.151611328125;I32:ADR.C[dc1]=1;F:ADR.AL[dc1]=3.1106;Dbl:CCpu.T[CMD]=312.5;I32:RPC.C[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=10;Dbl:RPC.T[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=420;I32:ROP.C[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=80768493;I32:MAPI.C[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=23;Dbl:MAPI.T[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=420;I32:MB.C[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=10;F:MB.AL[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=42;Dbl:ST.T[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=59;I32:ATE.C[dc1.domain-]=1;F:ATE.AL[dc1.domain-]=0;Dbl:STCPU.T[EWS15mb1.fb00df0b-8bdd-4dee-81a3-1696ea8bd747]=46,,ExceptionHandler_Execute=Microsoft.Exchange.Services.Core.Types.ServerBusyException:
The server cannot service this request right now. Try again later.    at Microsoft.Exchange.Services.Core.Search.NormalQueryView.ThrowIfFindCountLimitExceeded(UInt32 viewLength)    at Microsoft.Exchange.Services.Core.Search.NormalQueryView.RetrieveCalendarViewData(Object[][]
view Int32 rowsToGet)    at Microsoft.Exchange.Services.Core.Search.CalendarPageView.ApplyPostQueryPaging(Object[][] view)    at Microsoft.Exchange.Services.Core.Search.NoGrouping.IssueQuery(QueryFilter query Folder
folder SortBy[] sortBy BasePagingType paging ItemQueryTraversal traversal PropertyDefinition[] propsToFetch RequestDetailsLogger logger)    at Microsoft.Exchange.Services.Core.FindItem.FindItemsInParent(IdAndSession
folderIdAndSession)    at Microsoft.Exchange.Services.Core.FindItem.Execute()    at Microsoft.Exchange.Services.Core.ExceptionHandler`1.Execute(CreateServiceResult createServiceResult Int32 index GenerateMessageXmlForServiceError
generateErrorXml);,
And here is the throttling policy I'm using for those users.
ThrottlingPolicyScope                       : Regular
IsServiceAccount                            : False
AnonymousMaxConcurrency                     : 1
AnonymousMaxBurst                           : 120000
AnonymousRechargeRate                       :420000
AnonymousCutoffBalance                      : 720000
EasMaxConcurrency                           : 10
EasMaxBurst                                 : 480000
EasRechargeRate                             : 1800000
EasCutoffBalance                            : 600000
EasMaxDevices                               : 100
EasMaxDeviceDeletesPerMonth                 : Unlimited
EasMaxInactivityForDeviceCleanup            : Unlimited
EwsMaxConcurrency                           : Unlimited
EwsMaxBurst                                 : Unlimited
EwsRechargeRate                             : Unlimited
EwsCutoffBalance                            : Unlimited
EwsMaxSubscriptions                         : Unlimited
ImapMaxConcurrency                          : Unlimited
ImapMaxBurst                                : 3600000
ImapRechargeRate                            : 600000
ImapCutoffBalance                           : Unlimited
OutlookServiceMaxConcurrency                : 27
OutlookServiceMaxBurst                      : 300000
OutlookServiceRechargeRate                  : 900000
OutlookServiceCutoffBalance                 : 3000000
OutlookServiceMaxSubscriptions              : 5000
OutlookServiceMaxSocketConnectionsPerDevice : 4
OutlookServiceMaxSocketConnectionsPerUser   : 12
OwaMaxConcurrency                           : 20
OwaMaxBurst                                 : 480000
OwaRechargeRate                             : 1800000
OwaCutoffBalance                            : Unlimited
OwaVoiceMaxConcurrency                      : 3
OwaVoiceMaxBurst                            : 75000
OwaVoiceRechargeRate                        : 375000
OwaVoiceCutoffBalance                       : 525000
PopMaxConcurrency                           : 20
PopMaxBurst                                 : 3600000
PopRechargeRate                             : 600000
PopCutoffBalance                            : Unlimited
PowerShellMaxConcurrency                    : 18
PowerShellMaxBurst                          : Unlimited
PowerShellRechargeRate                      : Unlimited
PowerShellCutoffBalance                     : Unlimited
PowerShellMaxTenantConcurrency              :
PowerShellMaxOperations                     : Unlimited
PowerShellMaxCmdletsTimePeriod              : Unlimited
ExchangeMaxCmdlets                          : Unlimited
PowerShellMaxCmdletQueueDepth               : Unlimited
PowerShellMaxDestructiveCmdlets             : Unlimited
PowerShellMaxDestructiveCmdletsTimePeriod   : Unlimited
PowerShellMaxCmdlets                       : Unlimited
PowerShellMaxRunspaces                      : Unlimited
PowerShellMaxTenantRunspaces                :
PowerShellMaxRunspacesTimePeriod            : Unlimited
PswsMaxConcurrency                          : 18
PswsMaxRequest                              : Unlimited
PswsMaxRequestTimePeriod                    : Unlimited
RcaMaxConcurrency                           : Unlimited
RcaMaxBurst                                 : 150000
RcaRechargeRate                             : 900000
RcaCutoffBalance                            : Unlimited
CpaMaxConcurrency                           : Unlimited
CpaMaxBurst                                 : Unlimited
CpaRechargeRate                             : Unlimited
CpaCutoffBalance                            : Unlimited
MessageRateLimit                            : Unlimited
RecipientRateLimit                          : Unlimited
ForwardeeLimit                              : Unlimited
DiscoveryMaxConcurrency                     : 15
DiscoveryMaxMailboxes                       : 20000
DiscoveryMaxKeywords                        :2000
DiscoveryMaxPreviewSearchMailboxes          : 5000
DiscoveryMaxStatsSearchMailboxes            : 1000
DiscoveryPreviewSearchResultsPageSize       : 2000
DiscoveryMaxKeywordsPerPage                 : 500
DiscoveryMaxRefinerResults                  : 500
DiscoveryMaxSearchQueueDepth                : 128
DiscoverySearchTimeoutPeriod                : 30
PushNotificationMaxConcurrency              : 20
PushNotificationMaxBurst                    : Unlimited
PushNotificationRechargeRate                : Unlimited
PushNotificationCutoffBalance               : Unlimited
PushNotificationMaxBurstPerDevice           : 10
PushNotificationRechargeRatePerDevice       : 6
PushNotificationSamplingPeriodPerDevice     : 600000
EncryptionSenderMaxConcurrency             : 200
EncryptionSenderMaxBurst                    : 4800000
EncryptionSenderRechargeRate                : 18000000
EncryptionSenderCutoffBalance               : Unlimited
EncryptionRecipientMaxConcurrency           : 20
EncryptionRecipientMaxBurst                 : 480000
EncryptionRecipientRechargeRate             : 1800000
EncryptionRecipientCutoffBalance            : Unlimited
ComplianceMaxExpansionDGRecipients          : 10000
ComplianceMaxExpansionNestedDGs             : 25
IsLegacyDefault                             : False
Diagnostics                                 :
Do you have an idea how to get rid of this?
Thank you.
Regards
Carsten

Hi,
This issue occurs because the EWS monitoring detects that the limit for the requests that are from a Client Access server to a Mailbox server was reached. Therefore, the Client Access server returns an ErrorServerBusy response code to all EWS requests to
the Mailbox server.
To work around this issue, make the following changes in the Web.config file on the Client Access server, The Web.Config file is located in the following path: Drive\Program Files\Microsoft\Exchange Server\V15\ClientAccess\exchweb\ews
1.        Find the following code in the Web.config file:
<add key="MbxServerEnableConcurrencyControl" value="true" />
Change the MbxServerEnableConcurrencyControl value from true to
false.
2.        Add the following line of code into the Web.config file:
<add key="DefaultFindCountLimit" value="2000" />
<add key="MdbFairUnhealthyLatencyThreshold" value="500" />
3.        Reset IIS to check this issue.
If this issue persists, I suggest to create a new throttling policy with unlimited settings and applying the policy to those users.
New-ThrottlingPolicy EWSRCAunlimited
Get-ThrottlingPolicy EWSRCAunlimited | Set-ThrottlingPolicy -EWSPercentTimeInAD:$null -EWSFindCountLimit:$null -EWSPercentTimeInMailboxRPC:$null -EWSMaxConcurrency:$null -EWSFastSearchTimeoutInSeconds:$null -EWSMaxSubscriptions:$null -EWSPercentTimeInCAS:$null
-RCAPercentTimeInCAS:$null -RCAPercentTimeInMailboxRPC:$null -RCAMaxConcurrency:$null -RCAPercentTimeInAD:$null
Set-Mailbox username -ThrottlingPolicy EWSRCAunlimited
Best Regards.

Windows Server 2008 Server Manager - The WinRM Client Cannot Process the Request.

Hello,
I have recently purchased a Dedicated Server, and I have installed Windows Server 2008 R2. I want to use Server Manager because I don't really have that much experience with command line commands, so I wanted to use server manager, I can remotely connect
to my server but when I use Server Manager I get the error "The WinRM Client Cannot Process the Request, if the authentication scheme is different from Kerberos..." I haven't set up a domain between my PC and the Dedi, as I do not know how/or know
if this is applicable in this situation.
Thanks for your time!
Bill Gates Mate

Hi,
If you are using the non-domain management method, please refer the following article to add the trust host.
The related article:
Remoting Week: Non-Domain Remoting
http://blogs.technet.com/b/heyscriptingguy/archive/2013/11/29/remoting-week-non-domain-remoting.aspx
More third party article:
The WinRM client cannot process the request. If the authentication scheme is different
http://technico.qnownow.com/the-winrm-client-cannot-process-the-request-if-the-authentication-scheme-is-different/
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites;
therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure
that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

WINRM error : The WinRM client cannot complete the operation within the time spe cified

Dear All
Please find
We have developed a management pack on RMS which is analyzing information from linux by using module with calling winrm.
In mentioned module before calling winrm through netcat , the agent status will be controlled on target host.
But this error on specific sles host will halt the executing workflow .
This workflow will working successfully after couple of intervals and again the error coming up.
Although the workflow is halting by the mentioned error a task that used the same module is working fine without any error on that host and
This workflow is running on other instances of the discovered class correctly
(on SLES hosts sles11 and sles10 64bit) .
Error :
The WinRM client cannot complete the operation within the time spe cified. Check if the machine name is valid and is reachable over the network and firewall
exception for Windows Remote Management service is enabled. Error number: -2144108250
The WinRM client cannot complete the operation within the time specified. Check if the machine name is valid and is reachable over the network and firewall exce ption for Windows Remote Management
service is enabled.
Linux host :
SLES 10 32 bit
SP2

Hi,
Any error or warning for the operation manager log under event viewer?
Based on my research,
Possible Causes for this issue:
The host is unreachable due to incorrect name resolution, network outage, or
host outage
A network or host-based firewall is blocking TCP port 1270 connectivity to the target host
Resolutions
Verify that Management Server can ping the agent host by Fully-Qualified
Domain Name
Verify that no network firewalls or host firewall is blocking TCP port 1270
In addition, check whether you have heartbeat failures in your environment for linux, if so, please go through the below link:
OpsMgr: UNIX/Linux Heartbeat Failures After Applying KB2585542
http://operatingquadrant.com/2012/01/12/opsmgr-unixlinux-heartbeat-failures-after-applying-kb2585542/
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Error Happened at RFC Server Cannot Open the Job Batch File.

We have BW 7.0 and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
Error Happened at RFC Server Cannot Open the Job Batch File.
This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
Can anyone suggest any solutions for the above issue.
Thanks,
Naveen.

I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
More details on the wiki : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
Thanks,
Ben.

Error in Powerpoint 2011: "You don't have the permissions necessary to perform the operation"

We have a user with a new iMac running 10.7.2 that is having some strange problems with Powerpoint 2012 and who knows how many other programs. The issue is whenever these programs try to write to the user's personal network folder, which we keep on a DFS share. The error message only pops up when the user tries to save over something that already has that file name on the share. So she is always able to make file.pptx, but any subsequent "save" commands result in this error message: "You don't have the permissions necessary to perform the operation." Then, all she can do is save the file as newfile.pptx.
This doesn't happen in Word or any other files in the office suite. I've tried this both when connecting to the DFS share, and when using SMB to connect directly to the folder on the server, with no change in results. I've not tried removing/reinstalling the Office suite, because it's only powerpoint. I believe it must be something to do with her account's permissions in Active Directory, but when she uses this domain account on a Windows computer, there are no problems at all, of course.
There's a mere 3 google hits on that bolded error message, leaving me with very little to go on. Has anyone run into this before?

Hey,
I have Mac users using Office 2011 saving to CIFS shares having the exact same problem.
Like heiseheisepointed pointed out only Power Point seems to be affected. Word, Excel etc seem to work fine.
I have checked and reapplied the permissions to the share and it is not that, I believe it is something faulty in PowerPoint itself.
I also tried saving the files as ppt rather than pptx but you still get a permissions based error message.
Just wondering is eitherJeff or hbonath have any sucess in getting a fix for this?
Cheers
Genits

"The Server cannot find the document corresponding to the document id"

Periodically when we schedule a Discoverer Report (Apps EUL) we get the following error:
"The Server cannot find the document corresponding to the document id sent for open"
Months back Oracle told us to do the following as a workaround:
Log into Oracle Desktop, schedule something, then go back to OracleBI Discoverer Plus.
The error goes away.
This is an insane workaround. Has anyone seen this error and found a patch or a realistic workaround.
Thanks,
Bob

Bob.
I haven't seen this problem, but sure makes me wonder what Oracle is up to, when they essentially tell you to "give the scheduler a good slap via Disco Desktop" every now and then.
Maybe is you created an SR in Metalink you could slap them back on this one!
Russ

The report terminated with error: REP-501: The specified database cannot b

Dear All,
We are usning forms and reports 11g in weblogic . while running the reports from forms
frequently getting the error The report terminated with error: REP-501: The specified database cannot be connected..
Can anyboby help me to solve this problem

REP-501 typically means that Oracle Reports are unable to locate any available Oracle Databases. By default, Oracle Reports (similar to Oracle Forms) will only look for available databases in tnsnames.ora. Not only that, but the Reports environment by default will always look for the tnsnames.ora file in %ORACLE_INSTANCE%\config ($ORACLE_INSTANCE/config in Unix). I have seen these scenarios happen before especially if the TNS_ADMIN variable for your Forms environment variables is a directory different from %ORACLE_INSTANCE%\config. This would be the first place I would look.
If tnsnames.ora is located in %ORACLE_INSTANCE%\config, do all generated reports fail with this message or a select amount of them? If only a select amount of them, are there any similarities with these reports (e.g, size, parameters, etc.)?
Thanks,
Scott
http://pitss.com/us

Error: Request failed. unexpected response from server. the status code of response is '0' in safari browser

Hi,
I am using Javascript serializer to send server side code to javascript.
This works in IE 9, Mozilla, chrome. But fails with error in Safari as "request failed. unexpected response from server. the status code of response is '0' . status text of the response is ". null
My code is as below:
<asp:UpdatePanel ID="panLayout" runat="server">
<ContentTemplate>
<div id="divloadingImage" >
<br />
<asp:Image ID="imgLoading" runat="server" ImageUrl="/images/rotate.gif" ImageAlign="Middle" />
<br />
</div>
<div id="banner-fade" >
<ul id="carousel" class="bjqs">
</ul>
</div>
<asp:Timer ID="timerRSS" Interval="1" runat="server" ontick="timerRSS_Tick"></asp:Timer>
</ContentTemplate>
</asp:UpdatePanel>
In CS:
protected void timerRSS_Tick(object sender, EventArgs e)
DisplayImages();
divloadingImage.Visible = false;
bannerfade.Visible = true;
timerRSS.Enabled = false;
private void DisplayImages()
List<SharePointListItem> allImages = GetallImages();
JavaScriptSerializer serializer = new JavaScriptSerializer();
string json = serializer.Serialize(allImages);
string script = string.Format("<script type=\"text/javascript\">var allSliderImages={0}</script>", json);
if (!this.Page.ClientScript.IsClientScriptBlockRegistered("clientScripts"))
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScripts", script, false);
string scriptRegister = string.Format("<script type=\"text/javascript\">FetchData();</script>");
ScriptManager.RegisterClientScriptBlock(panLayout, panLayout.GetType(), "clientScriptData", scriptRegister, false);
In Javascript:
function FetchData() {
if (typeof allSliderImages !== "undefined") {
for (var i = 0; i < allSliderImages.length; i++) {
Imagesuccess(allSliderImages[i].fileleafref, allSliderImages[i].filedirref, allSliderImages[i].caption1);
var rota = $("#bannerfade");
rota.css("display", "block");
function Imagesuccess(fileLeaf, fileDir, UserCaption1) {
var ul = $('#bannerfade > ul');
var li;
var filename = fileLeaf;
var dir = fileDir;
var caption1 = UserCaption1;
var sfils = filename;
filename = dir + '/' + filename;
var imageCaptionData;
if (caption1 != null && caption1 != "") {
imageCaptionData = '<div class="HeadlineDiv">' + caption1 + '</div>';
li = $('<li>' + imageCaptionData + '<div class="SubHeadline" style="color:white;">' + '<br/></div>' + '<img src="' + filename + '"/>' + '</li>');
ul.append(li);
$('#bannerfade').bjqs({
height: 354,
width: 970,
responsive: true
Below is the data I get:
<script type="text/javascript">
var allSliderImages=[{"id":"1","Title":"Scenic","caption1":"scenic","fileleafref":"02.jpg","filedirref":"/s/Test/Library"},
{"id":"2","Title":"nature","caption1":"scenic2","fileleafref":"C034.jpg","filedirref":"/s/Test/Library"},
{"id":"3","Title":"Tiff","caption1":"Tiff","fileleafref":"test_tiff.tif","filedirref":"/s/Test/Library"}]</script>
The data is shown in all browsers except Safari. How to fix this?
Update: I have checked this link: http://sharepoint.sureshc.com/2013/07/unexpected-response-data-from-server-in.html
but that did not help.
Thanks

Hi,
From
this documentation, though SharePoint 2013 supports several commonly used web browsers including Apple Safari (latest released version), it is not guarantee
that SharePoint 2013 can run perfectly on all these browsers, “certain web browsers could cause some SharePoint 2013 functionality to be downgraded, limited, or available only through alternative steps”.
According to the code provided, it seems more relate to ASP.NET, therefore, a suggestion is that you can open a thread in ASP.NET forum, communities there will be more familiar
with this issue:
http://forums.asp.net/
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

"could not complete the requested operation" when i try to open the program

"could not complete the requested operation" when i try to open the program
what can i do
illustrator cc

accupub,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7

Similar Messages

Maybe you are looking for