The sql collation for bpc

Hi everyone,
I am installing bpc 7.0 based on sql server 2008. However, the database is also working for ERP and ERP must use the collation
"SQL_Latin1_General_CP850_BIN2". According to my experience, the collation of database for bpc is always "SQL_Latin1_General_CP1_CI_AS". who knows if bpc must use "SQL_Latin1_General_CP1_CI_AS"? Actually, I meet an error "can access 'master' database..." while installing. Thank you.

I have set up a new instance including a new database engine and a new analysis server and used the correct collation. However, after I install bpc, I check the log file, it is like the following
Installation Status
     Diagnostics: Done
     Create AppServer Database: Done
     Create Sample Database: Done
     Create Sample OLAP Database: Done
     Setup Management console: Done
     Starting BPC Send Governor Service: Error
     Starting BPC Insight Service: SKIP
Then I check the new analysis server, there isn't the apshell cube. However why the log is "Create Sample OLAP Database: Done", and why "Starting BPC Send Governor Service: Error"?

Similar Messages

How to Add the business scenario for BPC by Using BPR

Hi All,
We want to Use Solution Manager BPR for Mapping of Business Processes for BPC and for this we checked and tried the same consisting of Solution Manager 7.0, "SAP Business Objects Business Planning and Consolidation" but it shows an product version as for "SAP BPC 7.0 FOR MICROSOFT, " Only
But in Solution Manager 7.1 System it is showing for both ""SAP BPC 7.0 FOR MICROSOFT,SAP BPC 7.0 FOR SAP NET WEAVER".
Need to understand why it is not showing Netweaver in Solman 7.0 System and also for mapping this BPC in to Solution manager what are to be taken in to considerations.
Please suggest on this, your help is highly appreciated.
Thanks & Regards,

Hello Hazira,
do you have the same supportpackage level of component ST-ICO in both systems?
The BPR content is always delivered with the ST-ICO component.
Regards,
Thomas

Find out the sql query for special characters.

Hi,
I have the emp table with column name first_name.In that table i have lot records with first_name inlcudes the below mentioned special characters.
¡ , ¿, ,Ä,Å,ä,ª,À,Á,Ã,à,á,ã,å,Æ,æ,Ç,ç,È,É,Ê,Ë,è,é,ê,ë,Ì,Í,Î, Ï,ì,í,î,ï, Ñ,ñ, ô, º, Ò, Ó, Ô, Õ, Ö, Ø, ò, ó, õ, ö, ø, ß, Û, Ù, Ú, Ü,ù, ú, û, ü, ÿ,
I am looking for the records with includes the above mentioned special characters in the first_name column.
Can u please give the sql query to find out the records.
Thanks&Regards
N.Sivaraman

I am looking for the records with includes the above mentioned special characters in the first_name column.One way would be:
select emp.*
from emp,
       table (
         sys.odcivarchar2list ('¡',
                               'Ä',
                               'Å',
                               'ä',
                               'ª',
                               'À',
                               'Á',
                               'Ã',
                               'à',
                               'á',
                               'ã',
                               'å',
                               'Æ',
                               'æ',
                               'Ç',
                               'ç',
                               'È',
                               'É',
                               'Ê',
                               'Ë',
                               'è',
                               'é',
                               'ê',
                               'ë',
                               'Ì',
                               'Í',
                               'Î',
                               'Ï',
                               'ì',
                               'í',
                               'î',
                               'ï',
                               'Ñ',
                               'ñ',
                               'ô',
                               'º',
                               'Ò',
                               'Ó',
                               'Ô',
                               'Õ',
                               'Ö',
                               'Ø',
                               'ò',
                               'ó',
                               'õ',
                               'ö',
                               'ø',
                               'ß',
                               'Û',
                               'Ù',
                               'Ú',
                               'Ü',
                               'ù',
                               'ú',
                               'û',
                               'ü',
                               'ÿ'
where instr (ename, column_value) > 0

What is the SQL Standard for passing back a 0 in an Amount Field

So I have an Amount Column in my database. What is the best way and the SQL Standard to pass back a 0 if it is a <NULL>? With a COALESCE statement?
Thanks for your review and am hopeful for a reply.

This is UNBELIEVEABLE! I got rid of my TextBox13 all together...Deleted it to start from scratch. And it is still erroring on TextBox13!!! I even checked the Properties List and there is no TextBox13. What in God's name is going on here?!?!?
Am I missing something???
Hi ITBobbyP,
As to this issue, I find that this is a known issue which you can see on the link below:
http://connect.microsoft.com/SQLServer/feedback/details/649210/bids-sql-2008-r2-warnings-not-clearing
According to the Feedback, we can workaround this known issue by Re-open the project. And if Warning was in fact resolved, it will no longer show on the Business Intelligence Development Studio (BIDS) "Error List".
As to your former issue, please refer to the expression post by
Jingyang Li.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Can I change the SQL Datatype for Oracle Date?

xMII 11.5 maps Oracle's Date type to its SQL type code 91 (Date). When used in a display template, this xMII type displays only the date component (for example, "5/5/2007"), but in Oracle it holds the date and time. In Java, the java.sql.Date type also holds the time component. To get xMII to display a date/time (for example, "5/5/2007 11:23:59") you must have a SQL type code of 93 (Timestamp).
Is there any way to get my xMII widgets to show the date and time components of an Oracle Date? Is there a mapping of some kind that tells xMII which database SQL types map to which xMII SQL type codes?
-tim

In Aqua Data Studio:
SELECT CREATED_DATE_TIME, MESSAGE FROM COLLABORATION_LOG
where CREATED_DATE_TIME > to_date('01/01/07','mm/dd/yy') and site='DEM1'
order by CREATED_DATE_TIME DESC
GO
results:
CREATED_DATE_TIME   MESSAGE
5/3/2007 8:30:25 PM   (403)Access Forbidden
5/3/2007 8:30:25 PM   (403)Access Forbidden
5/3/2007 8:30:25 PM   (403)Access Forbidden
If I put the exact same SQL (without the "GO" at the end which is an Aqua Data Studio keyword) into a Fixed SQL Query in xMII and click "Test" and choose html format I get:
CREATED_DATE_TIME MESSAGE
05/03/2007 00:00:00 (403)Access Forbidden
05/03/2007 00:00:00 (403)Access Forbidden
05/03/2007 00:00:00 (403)Access Forbidden
The time component is reported as "00:00:00" in xMII which is not the desired result. I want xMII to see that column as a Timestamp which should read and sore both the date and time components in xMII.
-tim

What is the sql command for SELECT with OR condition

Hi
What is the correct sql command for doing select with or condition??
SELECT * from TempData
WHERE port = '123'
OR serialnumber = '555'
So if there is a port = 123 or if there is a serialnumber = 555, I will get a successful select.
Thanks for helping a newbie!!

Hi
What is the correct sql command for doing select with
or condition??
SELECT * from TempData
WHERE port = '123'
OR serialnumber = '555'
So if there is a port = 123 or if there is a
serialnumber = 555, I will get a successful select.
Thanks for helping a newbie!!Make sure you bracket your OR conditions
eg
SELECT * from TempData
WHERE column = 'VALUE'
and port = '123'
OR serialnumber = '555'
is read as
SELECT * from TempData
WHERE (column = 'VALUE'
and port = '123' )
OR serialnumber = '555'
which is not the same as
SELECT * from TempData
WHERE column = 'VALUE'
and ( port = '123'
OR serialnumber = '555' )

How to always hide the SQL statements for users when they run User Queries?

Hi,
from the IT dept. position, I don't want users to see and be so curious about the SQL commands.
How can I always hide the textbox of Display Query Structure?
thanks.

Hi,
Unfortunately system design has short of this function. If users are allowed to run those queries, you can not hide the query structure.
You may post a DRQ here: /community [original link is broken]
Thanks,
Gordon

Please Help with the sql below for hierarchies

Hi all.
I have a table named stg_org_hier whose data looks like this
i would like to build the hierarchy from BU,AREA,REGION,DISTRICT,TERR
There are data cyles in the data below
stg_org has this data
QTR_CD     HIER_LVL_CD CURR_RDT_ID     DISTRICT_RDT_ID
2007Q4     AREA     E0F7B00000000     E0F7B00000000
2007Q4     BU     E0F7B00000000     E0F7B00000000
2007Q4     AREA     E0F7B40000088     E0F7B40000000
2007Q4     REGION     N0F7B40400000     E0F7B40000000
2007Q4     REGION     E0F7B40700000     E0F7B40000000
2007Q4     AREA     E0F7B00000088     E0F7B00000000
2007Q4     AREA     E0F7B40000000     E0F7B00000000
2007Q4     DISTRICT     N0F6B40405C99     N0F7B40400000
2007Q4     REGION     N0F7B40400088     N0F7B40400000
2007Q4     DISTRICT     N0F7B40405M99     N0F7B40400000
2007Q4     TERR     N0F1B40405201     N0F7B40405M99
they would like to see the output in the below in the below form
QTR_CD     HIER_LVL_CD CURR_RDT_ID     DISTRICT_RDT_ID
2007Q4     BU     E0F7B00000000     E0F7B00000000
2007Q4     AREA     E0F7B00000000     E0F7B00000000
2007Q4     AREA     E0F7B00000088     E0F7B00000000
2007Q4     AREA     E0F7B40000000     E0F7B00000000
2007Q4     AREA     E0F7B40000088     E0F7B40000000
2007Q4     REGION     E0F7B40700000     E0F7B40000000
2007Q4     REGION     N0F7B40400000     E0F7B40000000
2007Q4     DISTRICT     N0F6B40405C99     N0F7B40400000
2007Q4     REGION     N0F7B40400088     N0F7B40400000
2007Q4     DISTRICT     N0F7B40405M99     N0F7B40400000
2007Q4     TERR     N0F1B40405201     N0F7B40405M99
Here is the sql i have written :
select curr_terr_rdt_id,district_rdt_id,hier_lvl_cd,level from STG_ORG_QTR_SF_HCHY
connect by prior
curr_terr_rdt_id=district_rdt_id

qtr_cd,hier_lvl_cd,curr_rdt_id, district_rdt_id
2007Q4,BU,         E0F7B00000000,E0F7B00000000
2007Q4,AREA,       E0F7B00000000,E0F7B00000000
2007Q4,AREA,       E0F7B00000088,E0F7B00000000
2007Q4,AREA,       E0F7B40000000,E0F7B00000000
2007Q4,AREA,       E0F7B40000088,E0F7B40000000
2007Q4,REGION,     E0F7B40700000,E0F7B40000000
2007Q4,REGION,     N0F7B40400000,E0F7B40000000
2007Q4,DISTRICT,   N0F6B40405C99,N0F7B40400000
2007Q4,REGION,     N0F7B40400088,N0F7B40400000
2007Q4,DISTRICT,   N0F7B40405M99,N0F7B40400000
2007Q4,TERR,       N0F1B40405201,N0F7B40405M99Not having a database at hand right now is helpful this time ;)
Indenting the data clearly shows that the hierarchy rules are being violated (cycles you are mentioning do not matter in this case):
Each node must have a unique predecessor except the root having none (in your case data on lines 3 and 4 both point to lines 1 and 2)
2007Q4,BU,         E0F7B00000000,E0F7B00000000
2007Q4,AREA,       E0F7B00000000,E0F7B00000000
       2007Q4,AREA,       E0F7B00000088,E0F7B00000000
       2007Q4,AREA,       E0F7B40000000,E0F7B00000000
              2007Q4,AREA,       E0F7B40000088,E0F7B40000000
              2007Q4,REGION,     E0F7B40700000,E0F7B40000000
              2007Q4,REGION,     N0F7B40400000,E0F7B40000000
                     2007Q4,DISTRICT,   N0F6B40405C99,N0F7B40400000
                     2007Q4,REGION,     N0F7B40400088,N0F7B40400000
                     2007Q4,DISTRICT,   N0F7B40405M99,N0F7B40400000
                            2007Q4,TERR,       N0F1B40405201,N0F7B40405M99Removing the first data line or changing it's curr_rdt_id will make hierarhical queries work (lines 1 and 2 would better not point to themself)
Regards
Etbin
Message was edited by: Etbin
user596003

How many SQL CAL for bpc 7.0 Microsoft

hello
customer asks how many Microsoft SQL Client Access Licenses he must buy to use SAP BPC 7.0 SP3 Microsoft (100 users).
As there is not any more direct access from Bpc client to SQL or Analysis services, I think 1 CAL is enough.
Could tell me if I'm right ?
Thanks.

David,
Don't you think your remark was rather uncharitable? It is true, there are a lot of people trying to mooch off of others' kindness (and as long as there are willing folks complying for whatever reasons, it is not going to change anytime soon), when it comes to hardcore technical details about a product, lot of people are at a loss as to how the things work (yours truly included - i have worked in SAP space for almost a decade and i couldn't tell you their licensing details - I never needed to do that to discharge my role as a functional consultant). I think Remy did indicate the thinking behind the question which is much more than a lot of folks do when they ask you and others to just e-mail some document etc....
I am sure you would concur.

How to write the SQL query for generating triangular numbers

Hi,
I have a table ..which stores the sequence number like this
Seq :
1000
1200
1300
1500
1800
1900
Now i want to get a result like this
1000 1000
1200 2200
1300 3500
1500 5000
1800 6800
1900 8700
how can it be achieved. I tried using Lead and lag. but only I can add the n+1 or n-1 results. Please help.

I've never heard it called 'triangular numbers' before but I think you're looking for a 'running total':
SQL> WITH data AS
2 (
3     SELECT 1000 AS num FROM dual UNION ALL
4     SELECT 1200 AS num FROM dual UNION ALL
5     SELECT 1300 AS num FROM dual UNION ALL
6     SELECT 1500 AS num FROM dual UNION ALL
7     SELECT 1800 AS num FROM dual UNION ALL
8     SELECT 1900 AS num FROM dual
9 )
10 /* END SAMPLE DATA */
11 SELECT num, SUM(num) OVER (ORDER BY num) AS running_total
12 FROM   data
13 ORDER BY 1
14 ;
       NUM RUNNING_TOTAL
      1000          1000
      1200          2200
      1300          3500
      1500          5000
      1800          6800
      1900          8700
6 rows selected.

What is the sql query for this

table Employee
EmpId
Name
MonthlySalary
DateofJoining
Suggest a sql server query to find out the employee details whose having salary greater than their yers of experiance
nravhad

Hi ,
As this seems to be a kind of lab exercise question for learning purpose , i am giving you the pseudo code which will help to solve this problem and learn.
select <the requeired columns> from employee table.
where Find the no of years between dateofjoining and current date using DATEDIFF function< monthly salary
if this is not a lab exercise problem for learning purpose , please forgive my ignorance.
Best Regards Sorna

What is the sql statement for doing this?

Hi,
I am currently doing a simple search engine that allows a user to key in a filename and display all the files' name close to keyed filename(the first two letters are the same).What is the proper sql statement to select from Document according to DocumentType and the first two letters of the filename? Am i doing it the right way? I am currently use Access 2002, dunno if it will affects me.Thanks in advance
[What i did]
String filename="doc,txt"
SELECT DocumentType from Rule where UserType='1' and Action='Search';
DocumentType=1,5,9,13,17,21,25,29,33,37,41,45 // This is all the document Type the user can see.
Next i used StringTokenizer break the DocumentType.
DocumentType[0]=1;
DocumentType[0]=5;
SELECT * from Document where DocumentType and Name <<< I want to select from Document according to DocumentType and the first two letters of the filename

One more try - from what I can follow?
If I assume you have a table named for example "UserRules"
which has fields UserID,UserType,UserAction
and has records like this that controls the document types
a user is allowed to see
UserID UserType Action
TOM 1 Search
BILL 7 Search
ROY 2 Search
And if I assume you have a table named for example "AllowedUserDocumentTypes"
which has fields UserType,DocumentTypes
and has records like this that controls the document types
a user is allowed to see
UserType DocumentTypes
1 1,3,4,5,6,19
2 7,9,12,18
3 1,19,33,27
And you have the document table which has
fields are DocNo,Name,Title,Date,Filename,DocumentType
and it has records like this
DocNo Name Title Date Filename DocumentType
12345 BILL Cars CarTypes 18
12346 ROY Trucks TruckTypes 2
12347 TOM Toys ToyTypes 17
12345 JACK Car Colors CarColors 19
12345 TOM Car Shapes CarShapes 7
Then the select statement
Select DocumentTypes from AllowedUserDocumentTypes
join UserRules where UserRules.UserType = AllowedUserDocumentTypes.UserType
and UserRules.UserID = 'ROY' and UserRules.Action = 'Search';
will return 7,9,12,18
If the DocumentType field is numeric and the user entered "CarCrap" the
select statement would have to look like this
SELECT * from Document
where left(Filename,2) = 'Ca' and DocumentType in (7,9,12,18);
If the DocumentType field is say varchar
select statement would have to look like this
SELECT * from Document
where left(Filename,2) = 'Ca' and DocumentType in ('7','9','12','18');
You will have to build these select statements related to the user.
Note you should also allow for upper and lower case differences. I
would suggest you convert the user entry into uppercase and do a select
like below
SELECT * from Document
where Ucase(left(Filename,2)) = 'CA' and DocumentType in (7,9,12,18);
This is all written from memory, not tested and I have not done this
in several years.
I was showing approximately how to build the statements before.
rykk

What can be the SQL Query for this requirement ?

Hi,
I have a table with fields like this:
ID DESC PARENT
01 ABC 02
02 ABC1 01
03 ABC2 01
04 ABC4 02
In the above table PARENT column refers to ID column , but actually in SQL query i want to have ID, DESC , and PARENTDESC (i.e., desc value of the corresponding ID)
Actual output that i need is
select ID , DESC , ?? from table where ID=someValue . Now if i provide ID=01 then output should be like this:
ID DESC PARDESC
01 ABC ABC1
Can anyone help what can be the required sql query ?
Edited by: bootstrap on Apr 29, 2011 6:15 AM

SELECT T1.ID, T1.DESC, T2.DESC
FROM TABLEA T1, TABLEA T2
WHERE T1.ID='01'
AND T2.ID = T1.PARENT;

Need the sql query for IN clause.

Hi All,
i have item data like --
IBM 200 and IBM 500
have present code like this ----select * from emp where in (IBM 200 and IBM 500);
so i need change or repalce like ('IBM 200','IBM 500')
Any body please help me out this..
Need to get out put 'IBM 200','IBM 500' from data IBM 200 and IBM 500 ...
Edited by: anbarasan on Oct 17, 2011 10:30 PM

Please consider the following when you post a question. This would help us help you better
1. New features keep coming in every oracle version so please provide Your Oracle DB Version to get the best possible answer.
You can use the following query and do a copy past of the output.
select * from v$version 2. This forum has a very good Search Feature. Please use that before posting your question. Because for most of the questions
that are asked the answer is already there.
3. We dont know your DB structure or How your Data is. So you need to let us know. The best way would be to give some sample data like this.
I have the following table called sales
with sales
as
      select 1 sales_id, 1 prod_id, 1001 inv_num, 120 qty from dual
      union all
      select 2 sales_id, 1 prod_id, 1002 inv_num, 25 qty from dual
select *
from sales 4. Rather than telling what you want in words its more easier when you give your expected output.
For example in the above sales table, I want to know the total quantity and number of invoice for each product.
The output should look like this
Prod_id   sum_qty   count_inv
1         145       2 5. When ever you get an error message post the entire error message. With the Error Number, The message and the Line number.
6. Next thing is a very important thing to remember. Please post only well formatted code. Unformatted code is very hard to read.
Your code format gets lost when you post it in the Oracle Forum. So in order to preserve it you need to
use the {noformat}{noformat} tags.
The usage of the tag is like this.
<place your code here>\
7. If you are posting a *Performance Related Question*. Please read
   {thread:id=501834} and {thread:id=863295}.
   Following those guide will be very helpful.
8. Please keep in mind that this is a public forum. Here No question is URGENT.
   So use of words like *URGENT* or *ASAP* (As Soon As Possible) are considered to be rude.

What is the sql query for the real time reports Resource Stats?

Does anyone know what the query is that the real time report tool uses for the Resource Stats page? Trying to develop a custom report that displays similar information that is updated regularly.

Hi,
009 wrote:
Hi Frank,
Just wanted your opinion on the above given SQLI'm not sure I understand it.
I added some more formatting to help me read it:
SELECT      A
,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
          OR A=LAG(A,1) OVER (ORDER BY A)
          THEN LAG(B,1) OVER (ORDER BY A)
     END B_LAG
,     B
FROM     (
     SELECT A, B
     FROM
          SELECT '1'A,'Apple' B FROM DUAL UNION ALL
          SELECT '1'A,'cat'B FROM DUAL UNION ALL
          SELECT '2'A,'bat'B FROM DUAL UNION ALL
          SELECT '3'A,'rat'B FROM DUAL UNION ALL
          SELECT '2'A,'yellow'B FROM DUAL UNION ALL
          SELECT '1'A,'pin'B FROM DUAL
     CONNECT BY PRIOR A=B
     ORDER BY A
);What is the purpose of the CONNECT BY in what you have so far?
Is the idea that you will add another CONNECT BY query, using
CONNECT BY b_lag = PRIOR b?
Do you think that will be better than using ROW_NUMBER?
Will it work if (a, b) is not unique?

The sql collation for bpc

Similar Messages

Maybe you are looking for