The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed

hi all,
i am using SQL2005 server as my database server. i am trying to connect this server in java (i mean using JDBC). i am using windows authentication to connect my sqlserver.
i have the url connection like this
DriverManager.getConnection("jdbc:sqlserver://127.0.0.1\\SQL2005/database name",username","password");
i am trying to connect the server using the above URL, but i couldn't connect it throws an error as the following.
The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed. Error: "Connection refused: connect. Verify the connection properties, check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, and that no firewall is blocking TCP connections to the port.".
could anyone plz help me to make the connection in right way.
i have tried to ping via telnet as well, even telnot not able to connect
plz help me...
thanks

Hi,
Besides Madhu mentioned, please check the TCP/IP port number of the instance of SQL Server.
1. Open SQL Server Configuration Manager, and then expand SQL Server 2005 Network Configuration.
2. Click Protocols for InstanceName, and then make sure TCP/IP is enabled in the right panel and double-click TCP/IP.
3. On the Protocol tab, notice the value of the Listen All item.
4. Click the IP Addresses tab:
If the value of Listen All is yes, the TCP/IP port number for this instance of SQL Server 2005 is the value of the TCP Dynamic Ports item under IPAll.
If the value of Listen All is no, the TCP/IP port number for this instance of SQL Server 2005 is the value of the TCP Dynamic Ports item for a specific IP address.
5. Make sure the TCP Port is 1433.
6. Click OK.
If there are any more questions, please let me know.
Thanks.
***Xiao Min Tan***Microsoft Online Community***

Similar Messages

The TCP/IP connection to the host localhost, port 1433 has failed.

Hi, im using sql server 2000,
i have declared this in my program:
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String url = "jdbc:sqlserver://localhost:1433;databaseName=Factura";
Connection conn = DriverManager.getConnection(url,"sa","");and is giving me this exception:
run:
Got an exception!
The TCP/IP connection to the host localhost, port 1433 has failed.
Error: "connect timed out.
Verify the connection properties,
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port,
and that no firewall is blocking TCP connections to the port.".
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host localhost, port 1433 has failed.
Error: "connect timed out. Verify the connection properties,
check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port,
and that no firewall is blocking TCP connections to the port.".
        at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1033)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:817)
        at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:700)
        at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:842)
        at java.sql.DriverManager.getConnection(DriverManager.java:582)
        at java.sql.DriverManager.getConnection(DriverManager.java:185)
        at factura.FacturaView.conexion(FacturaView.java:317)
        at factura.FacturaView.jTextField1KeyPressed(FacturaView.java:268)
        at factura.FacturaView.access$900(FacturaView.java:41)
        at factura.FacturaView$5.keyPressed(FacturaView.java:150)
        at java.awt.Component.processKeyEvent(Component.java:6225)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2801)
        at java.awt.Component.processEvent(Component.java:6044)
        at java.awt.Container.processEvent(Container.java:2041)
        at java.awt.Component.dispatchEventImpl(Component.java:4630)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1850)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:712)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:990)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:855)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:676)
        at java.awt.Component.dispatchEventImpl(Component.java:4502)
        at java.awt.Container.dispatchEventImpl(Container.java:2099)
        at java.awt.Window.dispatchEventImpl(Window.java:2478)
        at java.awt.Component.dispatchEvent(Component.java:4460)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
BUILD SUCCESSFUL (total time: 34 seconds)how can i solve this?
thanks..
Edited by: derok on Dec 8, 2010 1:31 PM
Edited by: derok on Dec 8, 2010 9:14 PM
Edited by: derok on Dec 11, 2010 1:51 PM
Edited by: derok on Dec 11, 2010 1:52 PM

tschodt wrote:
derok wrote:
1434 did not worked eitherWhat port is your SQL Server listening on?
List of active ports:
C:\> netstat -naboOn linux I would add -l and -t to only get listening TCP ports.netstat -nabo gave me this:
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       2004
[httpd.exe]
TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       1148
e:\windows\system32\WS2_32.dll
E:\WINDOWS\system32\RPCRT4.dll
e:\windows\system32\rpcss.dll
E:\WINDOWS\system32\svchost.exe
E:\WINDOWS\system32\ADVAPI32.dll
[svchost.exe]
TCP    0.0.0.0:443            0.0.0.0:0              LISTENING       2004
[httpd.exe]
TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
[System]
TCP    0.0.0.0:2869           0.0.0.0:0              LISTENING       1528
E:\WINDOWS\system32\httpapi.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\RPCRT4.dll
[svchost.exe]
TCP    0.0.0.0:3306           0.0.0.0:0              LISTENING       2428
[mysqld.exe]
TCP    0.0.0.0:4400           0.0.0.0:0              LISTENING       2592
[nlsvc.exe]
TCP    0.0.0.0:7511           0.0.0.0:0              LISTENING       204
[raysat_3dsmax2010_32server.exe]
TCP    127.0.0.1:1028         0.0.0.0:0              LISTENING       3080
[alg.exe]
TCP    127.0.0.1:5152         0.0.0.0:0              LISTENING       188
[jqs.exe]
TCP    192.168.0.101:139      0.0.0.0:0              LISTENING       4
[System]
TCP    127.0.0.1:5152         127.0.0.1:1163         CLOSE_WAIT      188
[jqs.exe]
TCP    192.168.0.101:2869     192.168.0.1:4563       CLOSE_WAIT      4
[System]
UDP    0.0.0.0:500            *:*                                    908
[lsass.exe]
UDP    0.0.0.0:445            *:*                                    4
[System]
UDP    0.0.0.0:4500           *:*                                    908
[lsass.exe]
UDP    0.0.0.0:1434           *:*                                    3036
[sqlbrowser.exe]
UDP    127.0.0.1:123          *:*                                    1284
e:\windows\system32\WS2_32.dll
e:\windows\system32\w32time.dll
ntdll.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    127.0.0.1:1135         *:*                                    3508
[iexplore.exe]
UDP    127.0.0.1:1040         *:*                                    1284
e:\windows\system32\WS2_32.dll
E:\WINDOWS\system32\WINHTTP.dll
E:\WINDOWS\system32\upnp.dll
E:\WINDOWS\system32\RPCRT4.dll
E:\WINDOWS\system32\ole32.dll
[svchost.exe]
UDP    127.0.0.1:44301        *:*                                    2880
[PnkBstrA.exe]
UDP    127.0.0.1:1900         *:*                                    1528
e:\windows\system32\WS2_32.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\ADVAPI32.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    192.168.0.101:1900     *:*                                    1528
e:\windows\system32\WS2_32.dll
e:\windows\system32\ssdpsrv.dll
E:\WINDOWS\system32\ADVAPI32.dll
E:\WINDOWS\system32\kernel32.dll
[svchost.exe]
UDP    192.168.0.101:137      *:*                                    4
[System]
UDP    192.168.0.101:123      *:*                                    1284
e:\windows\system32\WS2_32.dll
e:\windows\system32\w32time.dll
ntdll.dll
-- unknown component(s) --
[svchost.exe]
UDP    192.168.0.101:138      *:*                                    4
[System]Edited by: derok on Dec 10, 2010 11:04 AM
Edited by: derok on Dec 10, 2010 11:11 AM

Java.sql.SQLException: The TCP/IP connection to the host has failed.

Hello. I hope you had a happy new year! Now its back to work.
I am having a problem connecting to a remote SQL Server DB. I am using NetBeans 5.5 and the latest J2EE. I am able to see the tables in the IDE and bind objects to data. But when I run it it gets this:
java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: no further information
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:100)
at com.sun.sql.rowset.internal.CachedRowSetXReader.connect(CachedRowSetXReader.java:344)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:126)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:968)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1428)
I checked the SQL Server Configuration manager on that machine and TCP/IP connections are allowed. What else could be wrong?
Thank You.

"Connection refused" means that the client sends a packet saying "I would like to connect to port number NNNN please" to the server computer, and the server computer's OS sends the reply "there is no process listening to that port on the network interface you are using".
The database server is not running, or running but not listening to TCP/IP connections, or at a different port from what you think, or listening to only selected network interfaces (it is possible for a process to listen to a specific interface or a wildcard for all interfaces). A less likely scenario is that a firewall is sending the "connection refused" message.
First aid check list for "connection refused":
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port. You need to configure the database to accept TCP connections; the server documentation or google should explain how.
- Try "telnet server-host-name the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try telnet with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"?

The TCP/IP connection to the host has failed.

Hi everyone;
I have project with Java and Sql server 2000.My application server is Jetty.I work this tool successfully in Windows 2000 Server but I cant in XP Pro Service Pack 2.I take this message :
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
My Sql Server TCP/IP enabled and port 1433.There is problem here.Because I cant connect 1433.I tried this command.
telnet localhost 1433 .It is failed.I tried to open this port in firewall.Still problem is continue.
I am waiting for ur answer...

please help me by giving the solution.Help yourself by fixing the connection settings OR your network. The error is very clear: no connection can be made to the database. So what could it be? Wrong IP? A firewall is blocking you somewhere?
Nobody can tell you, you are the only one with access to your server settings and network environment.

ES2: The TCP/IP connection to the host has failed

A very simple error message appears against a stalled livecycle process which runs upon a flex form submission. You'd think that the connection to the server was lost.This custom process ("completion") is attempting to write out to the backend database at that time.
However,the "read" process to prepopulate the form already correctly uses the same JNDI connection. And that works. Every time.
The solution was to go into the "completion" process and move around the individual nodes, re-save and deploy again
Why is this - seems to be more problems in ES2 than we bargained for perhaps.

"Connection refused" means that the client sends a packet saying "I would like to connect to port number NNNN please" to the server computer, and the server computer's OS sends the reply "there is no process listening to that port on the network interface you are using".
The database server is not running, or running but not listening to TCP/IP connections, or at a different port from what you think, or listening to only selected network interfaces (it is possible for a process to listen to a specific interface or a wildcard for all interfaces). A less likely scenario is that a firewall is sending the "connection refused" message.
First aid check list for "connection refused":
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port. You need to configure the database to accept TCP connections; the server documentation or google should explain how.
- Try "telnet server-host-name the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try telnet with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"?

Com.microsoft.sqlserver.jdbc.SQLServerException The TCP/IP connection fail

* While executing the following JDBC code with SQLServer 2005, it throws Exception
* I dont wts wrong in my code, (Note: I have included the sqljdbc.jar in my path)
* Pls let me know the problems in my code
* Thanks, Following is my code and error
My Coding :
import java.sql.*;
public class JDBCwithJava {
     public void work() {
           // Create a variable for the connection string.
           String connectionUrl = "jdbc:sqlserver://localhost:1433;" +"databaseName=empdb";
           // Declare the JDBC objects.
           Connection con = null;
           Statement stmt = null;
           ResultSet rs = null;
           try {
                //Load the driver
              Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
              // Establish the connection.
              con = DriverManager.getConnection(connectionUrl);
              System.out.println("Database Successfully Connected...!");
              //Connection Info
              DatabaseMetaData dm = con.getMetaData();
             System.out.println("Driver Information");
             System.out.println("\t Driver Name: "+ dm.getDriverName());
             System.out.println("\t Driver Version: "+ dm.getDriverVersion ());
             System.out.println("\n Database Information ");
             System.out.println("\t Database Name: "+ dm.getDatabaseProductName());
             System.out.println("\t Database Version: "+ dm.getDatabaseProductVersion());
              // Create and execute an SQL statement that returns some data.
              String SQL = "select * from emptable";
              stmt = con.createStatement();
              rs = stmt.executeQuery(SQL);
              // Iterate through the data in the result set and display it.
              while (rs.next()) {
                 System.out.println(rs.getInt(1) + " " + rs.getString(2));
           // Handle any errors that may have occurred.
           catch (Exception e) {
              e.printStackTrace();
           finally {
              if (rs != null)
                   try {
                        rs.close();
                  catch(Exception e) {
              if (stmt != null) try { stmt.close(); } catch(Exception e) {}
              if (con != null) try { con.close(); } catch(Exception e) {}
     public static void main(String ar[]){
          JDBCwithJava call = new JDBCwithJava();
          call.work();
Error :
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at java.sql.DriverManager.getConnection(Unknown Source)
     at JDBCwithJava.work(JDBCwithJava.java:17)
     at JDBCwithJava.main(JDBCwithJava.java:58)

Do you have SQL Server on your box? Is it listening on port 1433?
I also don't see any username/password information provided to the JDBC driver.

How does the remote object connect to the correct host

i have had a small doubt on how the remote reference manages to find the correct host to call the subsequent methods after a sucessful lookup.
given a rebind or bind to the registry, the registry only stores the alias and the remote reference, now imagine a client calling a lookup on the registry would only get the remote reference, and not in which machine the remote object is found.
what i wanted to know is how does the client or atleast the remote reference returned by the registry correctly connects to the machine where the remote object is located. i dont think its stored in the stub bcos the stub is a complie time stuff.
i would be pleased to have a comprehensive answer for this.

The membership in the group communication framework is always accurate and upto date.Up to date to the moment when you check. Not up to date to the moment when you make the RMI call.
i could basically chk if this ip is available in the membership list.Complete waste of time. It doesn't matter what you check ahead of time, you are still trying to predict the future.
And you still have to deal with ConnectException etc from the actual remote method call. And the way you will deal with that in your situation is exactly the same as what you were going to do if your ahead-of-time check failed.
So just catch the exception(s) and deal with the problem there.

The TCP/IP connection was unexpectedly terminated by the server (NNTP)

I had a prior thread on this topic which was apparently closed to further posts:
http://homecommunity.cisco.com/t5/Wireless-Routers/The-TCP-IP-connection-was-unexpectedly-terminated...
so I'm opening this new thread. The problem was never solved and I could not deal with the help being offered here previously.
The problem is...
My connection to a NNTP news service which I use very frequently is reset every 10 minutes so that I get the message: The TCP/IP connection was unexpectedly terminated by the server.
I have been getting this error at least a dozen times per day for more than a year. So it has become a major annoyance and I want to fix it if possible. I wonder if there's any new insight available? I'm not a rank beginner but am far from being a router expert. I do not understand many of the router settings.
Here's a more detailed description of the problem...
After getting the error, I must then click on something else in my email client (Outlook Express) then return to click on a newsgroup under that news service, whereupon it reestablishes a valid connection for another 10 minutes. If I am active and click on various messages to read them in the newsgroup, the 10 minute timeout does not happen. It's only when I have left the connection idle without activity for 10 minutes that it times out.
This is a news server which requires an authenticated login with username and password. The same problem happens at a different news server which also requires an authenticated login with username and password. So it is not a problem unique to just one news service. It affects all news services which have an authenticated login requirement. An example news service with a sample newsgroup which has this type of problem is
news:\\news.eternal-september.org\alt.free.newsservers
It's free but you must register at http://eternal-september.org/ to use this news service.
It does not happen at open news services without any login requirements. So it is definitely related to the login requirement.
Perhaps most importantly, it does not happen if I remove the Linksys E2000 router from the circuit and connect my DSL modem directly to computer. So it is definitely a router-related problem causing this inactivity timeout every 10 minutes.
Windows XP Home SP3
Outlook Express 6
Zone Alarm 6.1.744.001
Linksys E2000 router
firmware 1.0.04 build 7
software 1.3.11006.1
connection type (WAN) DHCP
mostly the default settings used

[It is very frustrating to try to work with this board because of the short timeout invoked when editing a message! The following is what I intended to post after a bit of reflection...]
I researched this a bit and bridge mode is available via a setting in my Speedstream 4100 modem, so I don't have to call my ISP. But I'll need to research the consequences a bit more and record some variables to make sure I can get back to my current configuration. There are 3 available settings (radio buttons) in my modem...
PPP Location
WARNING
Changing these settings may interfere with your ability to connect to the Internet.
* PPP is on the modem. This is the normal mode for this modem when connected to a single computer. In this mode, the PPP session is initiated from the modem. Gateways and routers should work in this mode but their configuration may have to be changed to do so (e.g., you may need to have the gateway/router IP address changed to 192.168.1.1).
* PPP is on the computer. This mode is normally used if you need to run a PPPoE client on your PC. This mode can be used with a gateway or router which initiates a PPPoE session. To return to the DSL modem user interface you will need to directly connect your PC to the modem without any gateway or router between the modem and the PC.
* Bridged Mode (PPPoE is not used). This mode must be used if you are connecting to a non-PPPoE network. Selecting this mode will cause the modem to automatically restart.

Connection refused to host 127.0.0.1 (Lookup windows -- Linux)

Hi Folks,
Buddies I am facing a problem. My server is running at specified port on a linux machine but when I try to connect it from a windows machine i got error massage "Connection refused to host 127.0.0.1 " but it's very inscrutable message.
I made some changes in /etc/hosts file and /etc/xinetd.d/services and everything worked fine.
But now there is a question come in my mind that , Is there any alternative so we don't need to make any change in above mentioned two files.
My Changes;
/etc/host
I've added system ip and name in the first line.
/etc/xinetd.d/services
Modified services files and enabled protocol and permitted to all system who are under class three network.
Could anybody have a better idead to avoid these changes because of security issues?
--Manoj

Hi,,,Thanks
When I refer to random it is when the pc in windows in his configuration of net it has " obtain ip automatic " when the ip are fixed in the configuration of net I do not have problems of (connection refused to host:name_machine) what I need is to know that I must do to solve the problem (connection refused to host:name_machine) when in the pc they have a configuration of net of obtaining ip automaticamennte,
I dont understand when you say that..."you should always set java.rmi.server.hostname at server JVMs to the FQDN of the host, not the IP address." Where I do this ??, where I put it??, I dont understand
you can help me to know if this could solve my problem when the ip is obtained automatically
this it is my code...
public static UserPreferences systemPrefs;
static
try
Configuration cfgServer = (Configuration) Registry.lookupServer(Configuration.class);
systemPrefs = cfgServer.getSystemPreferences();
catch (Exception e)
Logger log = LoggerFactory.getLogger(AlertManagerServer.class);
log.error("Error obteniendo las preferencias para Alert Manager Client", e);
/** Puerto **/
public static final String SERVER_PORT = systemPrefs.getString(SystemModuleDescriptor.Settings.ALERTMANAGER_SERVER_PORT, "1198");
/** Server Name **/
public static final String SERVER_NAME = NotificationConstants.ALERTSERVER_NAME;
/** Client Separator **/
public static final String ALERTCLIENT_SEPARATOR = NotificationConstants.ALERTCLIENT_SEPARATOR;
* Constructor
public AbstractAlertManagerClient()
* Constructor
* @param clientName Nombre del cliente
* @throws Exception Problemas
public AbstractAlertManagerClient(String clientName)
throws Exception
launchClient(clientName);
* Subiendo el Cliente de Mensajeria
* @param clientName Nombre
* @throws ProvisioningException Problemas
public void launchClient(String clientName)
throws ProvisioningException
try
NotificationInterface notification = (NotificationInterface)Registry.lookupServer(NotificationInterface.class);
String serverIPAddress = notification.getServerIPAddress();
String serverInfo = "//" + serverIPAddress + ":" + SERVER_PORT + "/" + SERVER_NAME;
AlertManagerServerInterface server = (AlertManagerServerInterface) TransparentItemProxy.getItem( serverInfo,new Class[] { AlertManagerServerInterface.class });
AlertManagerClient client = new AlertManagerClient();
this.server = server;
this.name = setClientName(clientName);
client.server = server;
client.name = setClientName(clientName);
Object oclient1 = new Remote(this);
oclient = oclient1;
Remote.invoke(server, "registerClient", oclient1);
catch(Exception ex)
String msg = "";
msg += "[ERROR] trying com.iptotal.notification.bo.AbstractAlertManagerClient.AbstractAlertManagerClient()...subiendo Client ";
ProvisioningException pex = new ProvisioningException(ProvisioningException.ErrorCatalog.NOTIFICATION_DISPATCHING_ERROR, ex);
Logger log = LoggerFactory.getLogger(AbstractAlertManagerClient.class);
log.error(msg, pex);
throw pex;
* Registrar un Cliente
* @param client Cliente
public void registerClient(Object client)
try
String name = (String)Remote.invoke(client,"getClientName",null);
if( ! clients.containsKey(name) )
clients.put( name, client);
catch(Exception ex)
String msg = "";
msg += "[ERROR] trying com.iptotal.notification.bo.AlertManagerServer.registerClient(1) ";
Logger log = LoggerFactory.getLogger(AlertManagerServer.class);
log.error(msg + " " + ex.getMessage()); // VA: para que no salgan en el log los stacktrace del CAJO no route to host
Really Thank you for the help that you can offer me

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

The attempt to connect to the server on port 80 failed code error 12029

This error while playback of webapplication in the open script used for the load testing
I need some solution to solve this issue
The attempt to connect to the server on port 80 failed. Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
Error in section Run at line (script.java:37). The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT.
     at oracle.oats.scripting.modules.http.api.ThinBrowser.createResponseFromHttpJob(ThinBrowser.java:306)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:217)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:183)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:635)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1823)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2333)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2300)
     at script.run(script.java:37)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:262)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:632)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at oracle.oats.lbrowser.http.RSyncConnection.connect(RSyncConnection.java:480)
     at oracle.oats.lbrowser.http.RSyncConnection.runCurrentJob(RSyncConnection.java:871)
     at oracle.oats.lbrowser.http.RSyncConnection.IRBrowserConnection_doJob(RSyncConnection.java:201)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:899)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:833)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:798)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:212)
     ... 9 more
14:57:18,531 ERROR [1] Iteration 1 failed at line (script.java:37). The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT.
     at oracle.oats.scripting.modules.http.api.ThinBrowser.createResponseFromHttpJob(ThinBrowser.java:306)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:217)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:183)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:635)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1823)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2333)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2300)
     at script.run(script.java:37)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:262)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:632)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at oracle.oats.lbrowser.http.RSyncConnection.connect(RSyncConnection.java:480)
     at oracle.oats.lbrowser.http.RSyncConnection.runCurrentJob(RSyncConnection.java:871)
     at oracle.oats.lbrowser.http.RSyncConnection.IRBrowserConnection_doJob(RSyncConnection.java:201)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:899)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:833)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:798)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:212)
Edited by: user8692266 on Feb 10, 2010 1:47 AM
Edited by: user8692266 on Feb 10, 2010 1:47 AM

Hi
I'm guessing that you are going trough a proxy, if so you need to set your proxy setting for playback:
View -> OpenScript preferences -> Playback -> HTTP and enter the proxy settings.
Regards
Alex

The system cannot connect to the Application Server

Hello Everybody,
I have a problem when connecting to my BPC Application.
I get the following error when trying to open BPC:
"The system cannot connect to the (http://xxxxxx) Application Server. Verify that you have specified a valid Application server name, or see if the application server is unavailable at this time."
We have to reboot the application server to have acces again to the application.
The osoft website was also unavailable.
The server diagnosotic was OK.
And when consulting the tblLogs table I found this message:
==============[System Error Tracing]==============
[System Name] : ApplicationService [Message Type] : ErrorMessage [Job Name]     : OSoft.Services.Webservice.ApplicationService.ApplicationService.Query() [DateTime]     : 1/3/2011 4:27:35 PM [UserId]       : GROUPE\Deshors [Exception]       DetailMsg : {System.NullReferenceException: Object variable or With block variable not set.     at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)     at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)     at OSoft.Services.Webservice.ApplicationService.ApplicationService.ValidateUser()     at OSoft.Services.Webservice.ApplicationService.ApplicationService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)}
==============[System Error Tracing End ]==============
==============[System Error Tracing]==============
    [System Name] : Configuration [Message Type] : ErrorMessage [Job Name]     : ServerDefault.GetValue [DateTime]     : 1/3/2011 4:40:08 PM [UserId]       :   [Exception]       DetailMsg : {System.Exception: Cannot create ActiveX component.     at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName)     at OSoft.Services.Application.Configuration.ServerDefault.GetValue(String strKeyId)}
==============[System Error Tracing End ]==============
Any help?
Thank you in advance.

Hi expert,
Unfortunately, we still encounter the issue !!
We get Unhandled exceptions in the W3WP.EXE process, but the IIS logs do not show anything wrong.
Here is the Windows event warning message we get :
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/31/2011 11:43:11 AM
Event time (UTC): 1/31/2011 10:43:11 AM
Event ID: 0295c38777734029a3cec37ec035fa45
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1/ROOT/OSoft-1-129409441580590866
    Trust level: Full
    Application Virtual Path: /OSoft
    Application Path: C:\PC_MS\Websrvr\Web\
    *Machine name: **************
Process information:
    Process ID: 4323
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: Exception
    Exception message: Invalid UserID
Request information:
    Request URL: http://localhost/Osoft/Launch.aspx
    Request path: /Osoft/Launch.aspx
    User host address: ::1
    User:*******\Administrator
    Is authenticated: True
    Authentication Type: Negotiate
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 12
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset)
   at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks in advance for your help
Lionel

Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.

Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
<Email Edited by Host>

Discontinued by Google. Read here:
http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html

If the wifi on my iPod Touch is on nothing else on the router will connect to the internet

Ever since I updated my iPod Touch 4th Gen to iOS 6, If the wifi on my iPod Touch is on nothing else on the router will connect to the internet..
It's the weirdest thing.
My Wired and WiFi computers are experiencing DNS errors, unresolved URLs and in general having difficulty connecting to the internet...
That is.... UNTIL I SHUT OFF THE WIFI ON MYiPOD 4th Gen TOUCH!!!
Then everything works fine.
I've reset my router, several times.
I've reset my Cable Moden, several times.
The problem persists until I disable the WiFi on my iPod

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

The TCP/IP connection to the host 127.0.0.1 , port 1433 has failed

Similar Messages

Maybe you are looking for