The web ticket is invalid

Hi guys,
I'm following the steps from https://ucwa.lync.com/documentation/KeyTasks-CreateApplication all work fine until the step #9
I get an valid AccesToken and include in the header and I'm doing the post to https://myshost/ucwa/oauth/v0/applications and get the following error InternalSevererror and in the Response
Header.
Server: Microsoft-IIS/7.5
X-MS-Server-Fqdn: mydomaine
X-Ms-diagnostics: 28032;source="mysource";reason="The web ticket is invalid."
Date: Wed, 13 Aug 2014 15:15:06 GMT
X-Powered-By: ASP.NET
Any Clue ?
Regards

The immediate part that jumps out is the request link:
https://myshost/ucwa/oauth/v0/applications should be
https://myshost/ucwa/ouath/v1/applications
When using the OAuth token in step #8, is the result v0?
What does your request for step #9 look like?

Similar Messages

Lync 2013 Web App : Web Ticket error

Hi,
I have a Lync 2013 std installed on server 2008 r2, with edge , TMG and Wac server.
When i try to join a meeting with Lync Web App i get the error
There was an error contacting the web ticket service. Service Error !
I have tried several explorer ( chrome ,firefox, IE ), to restart FE, checking certificates, logs, IIS, TMG rules.
I cannot fixed this.
Is anynone has an idea ?
Thanks

Hi Joe,
Would you please tell us more details about this issue?
Have you tried all steps in the above links? Does this happenf or all client machines? Please try to reset IE to test the issue.
If the issue persists, please check event log and try to enabling logging tool for further troubleshooting.
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Error 1324: the folder path 'webi/' contains an invalid character

Hi pros,
I am getting this error when trying to install bobj xi 3.1 client version. the service pack is zero.
however, i previously had bobj xi 3.1 server / client components installed and bobj 4.0 client tools.
i uninstalled bobj 4 and bobj xi 3.1 server components from control panel. also, deleted them from registry.
still i am getting the above error.
kindly advise.

Hi,
Can you please check the following thread which is for the exact same question :
error 1324: the folder path 'webi/' contains an invalid character
Regards
Steph

Very slow start when initially entering the service ticket in Web UI (2007)

We seem to encounter a very slow start when initially entering the service ticket in Web UI (2007). Once in all seems speedy enough. I don't have my access arrange for the Service marketplace (OSS notes) yet so can't check if there is a known solution, which I suspect there is. Has anyone encountered this problem and possibly resolved it?.
Jason.

Previous posts have highlighted the following notes:
1048388 General Performance improvements of BSP transactions
1162605 Network performance for CRM 2007 Webclient
1162685 SAP CRM 2007 Webclient Performance
821045 Poor performance of MIME objects in BSP pages
581316 BSP Delta-Handling for CRM (BASIS 620 SP17)
However, I was wondering whether anyone has come across any other small changes that may have a major effect. A quick-win I guess you call it. From bitter experience I know there are rarely quick wins when it comes to optimisation due to the amount of re-testing etc.
But any further advice would be welcome.
Jas.

Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.

Hi,
I am tryng to create a Flex Project, but got stuck with an error....
The Error is Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
Initially I download jboss-5.1.0.GA and placed it in C folder.
While creating project, I selected J2EE server, selected remote object access service and LiveCycle Data Services...
In the next step, I de-selected the use default location for local LiveCycle Data Services server.
In the root folder - C:\jboss-5.1.0.GA
for Root URL: http://localhost:8700/flex/
Context Root: /flex
when I clicl Validate Configuration.. this is the error I get Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
I can't understand what is going wrong here....any ideas....
Thanks for the Help.....
Thanks

Run the wizard, select ColdFusion as the server technology, but don't
check the option to use remote object access service. Then, open the
project properties dialog, go to the Flex Compiler page, and add a the
compiler flag: -services
"C:\ColdFusion8\wwwroot\WEB-INF\flex\services-config.xml" (obviously
changing the path as appropriate). This flag is what gets set by the
wizard when you opt to use Flash Remoting. -http://www.feed-squirrel.com/index.cfm?evt=viewItem&ID=77732
Above is a work-around/solution that was successful for me. Below are screen shots of how I initially configured the project, following the above solution.
In the image above, notice how I didn't tick the "Use remote object access service" checkbox.
For the image below, the 'Y:\' value is a mapped network directory to my server (IIS) webroot, which is "\\windowsserver/Inetpub/wwwroot/". Root URL is the name of my server. Fill in the fields with correct values and hit finish.
Then navigate ( Project>Properties>Flex Compiler ) to this project's 'Flex Compiler context menu.
And 'W:\' is another mapped network directory that points obviously to my Coldfusion's WEB-INF\flex.
I hope that this helps. As you may see, I'm hoping that this will help you and others that are likely to come across problem.

"The client version is invalid." error when calling TemplateMgr.asmx web service of AD-RMS SDK 2.1

- In a WinForm application, trying to get a template from template GUID (AdminServiceRightsTemplateManager)
System.Web.Services.Protocols.SoapException: The client version is invalid. ---> Microsoft.RightsManagementServices.Admin.ClientInvalidVersionException: The client version is invalid.
at Microsoft.RightsManagementServices.Admin.WebServiceBase.CheckClientVersion(String serverFunctionalVersion)
Do we need to manually pass the ClientVersion into the service? Or some issues I didn't aware of?
Much appreciated for any suggestion and comments.
Thanks,
Raymond,
mengruts

After I read the notes written by Michael Lehmann (Title: How can I setup a soap server for use in JDeveloper 9i), I realized I need to turn off the proxy from JDeveloper. After that everything works.
Thank you, Michael!
- Hao

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Release Management 2013 Server Web Site throwing "Data at the root level is invalid..." error after applying RM 2013 Update 4

I upgraded our RM Server from 2013 Update 2 to Update 4. During smoke testing, I discovered that the RM approval website would get stuck and display a loading wheel when showing the list of releases. After rebooting the server and uninstalling and reinstalling,
I eventually got it to load the web site just fine, however the windows event log is displaying thousands of instances of the same error (about once a second).
Timestamp: 4/2/2015 2:25:05 PM
Message: Data at the root level is invalid. Line 2, position 1.: \r\n\r\n   at System.Xml.XmlTextReaderImpl.Throw(Exception e)
   at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
   at System.Xml.XmlTextReaderImpl.ParseRootLevelWhitespace()
   at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
   at System.Xml.XmlTextReaderImpl.Read()
   at System.Xml.Linq.XDocument.Load(XmlReader reader, LoadOptions options)
   at System.Xml.Linq.XDocument.Parse(String text, LoadOptions options)
   at Microsoft.TeamFoundation.Release.Common.ExtensionMethods.XmlExtensionMethods.ToXDocument(String value, Boolean preserveWhitespace)
   at Microsoft.TeamFoundation.Release.Common.Helpers.WebServiceHelper.ExtractWebMethod(String pathInfo, Stream inputStream)
Category: General
Priority: -1
EventId: 0
Severity: Error
Title:
Machine: [Server Name]
Application Domain: /LM/W3SVC/2/ROOT-1-130724725961138960
Process Id: 3448
Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Win32 Thread Id: 1136
Thread Name:
Extended Properties:
This is quite concerning because it leads me to think something else is wrong. I read somewhere else that .Net Framework 4.5.1 is required for RM, but the system requirements on MSDN don't mention that. Any help greatly appreciated.
Specs:
RM Server: Windows 2012 R2
Release Management 2013 Update 4
Connect to TFS Server 2013 Update 2
We are not using HTTPS:

Hi Joe519,
Thanks for your post.
And thank you for sharing the experience here.
All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The web application root or the URL is invalid?

Hey there- So basically I'm setting up a simple ASP.NET FB4 project using IIS locally. Before I get into my question, I can successfully create the project and test it on my machine. My concern is that I can not receive a valid confirmation from FB when setting up the configurations. For instance, if I place the correct paths:
Web application root: C:\inetpub\wwwroot\weborb4
Web application URL: http://localhost:1234/weborb4
I always receive this error, The web application root or the URL is invalid. Is there something I should be looking into? Any suggestions are appreciated!

Hi
I filed the bug http://bugs.adobe.com/jira/browse/FBG-2539 for the same

Cannot send email from Verizon to a specific domain using the web UI

I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?

rhodeislandred wrote:
I'm trying to send an email to a specific address on a domain I own from a Verizon account using the web UI. Whenever I click send, a popup appears saying "Your e-mail contains the following invalid e-mail addresses:" followed by the email address. I can send email to this address from a GMail account as well as my work email.
In Chrome, I can see that a "code":1002 error is being produced.
Does anyone know why this would happen? Does Verizon check destination domains for reputation? Is there any way to debug this further?
What is the domain that is giving you the error?

USING SSO TO SECURE THE WEB APPLICATION RUNNING ON JBOSS/WEBSPHERE

We are using Oracle portal for all our applications. We have Oracle Application Server, portal, SSO and OID installed. Basically the user should login through
protal, and the authentication is done by SSO against OID. After the authentication, the user accesses the portal home page. From the home page, there are application links. By clicking these application links, the user should be able to access the applications. But these applications are running on JBoss and WebSphere. Is there any way that we can secure these applications
by Oracle SSO?
I know that there is a plug-in (mod-osso) running on the Oracle Web Server to fulfill the tasks like directing the request to the single sign-on server,
authenticating, putting sso cookie into the session if authentication is successful. So the Oracle Web Server will take care of the authentication for all partner applications.
There is no such plug-in released for the web server of JBoss or WebSphere. Anybody has the experience or suggestion on how to solve our issue?
Thanks!

Hi,
Have you imported the java certificate into R/3 backend system ? if so.
Then just go to backend system and check on sm50 for each applicaion instance of any error eg.
SM50-> Display files (ICON) as DB symbol with spect.(cntrlshiftF8)
You will get logon ticket details.
with thanks,
Rajat

From the Web application does not display the report...

Hello,
I have a Web application in VS 2010 (NET 4.0) running reports in VS 2003 (NET 1.1) and CR XI. What should I consider for the reports to run well? When setting up the basics of the folder where the reports are in IIS 7.5, item I keep in the Application Pool: NET 1.1, but when in the same IIS server I click on Browse *: 80, I generated the following error: HTTP Error 500.19 - Internal Server Error
The requested page can not be accessed Because the related configuration data for the page is invalid.
I can do, thanks.

Reports are made in VS 2003 (. NET 1.1) and CR XI using a framework. This framework is placed in the web server (Windows 2008 Server R2) and called from VS 2010.
Sorry, I'm still having problem understanding this.
Only CRVS2010 will work with VS2010. The reports can be created in any version of CR you want, but to load the reports in VS2010, you need CRVS2010, create a project in VS2010, then deploy the project and the CRVS2010 runtime(?).
E.g.;
1) Create report using CR XI
2) Install CRVS2010 on a computer that has VS2010
3) Create a project using CRVS2010 in VS 2010 - can use any framework you want
4) Deploy VS2010 project
5) Install CRVS2010 runtime
- Ludek

Error While Run the WebI Report on SAP BW Query

Hi
I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
WebI Report is prompting for the below values
Calendar Year
Profit Center
Profit Center Hierarchy
Version.
Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look for list of values for the Profit Center and Profit Center Hierarchy.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions:
1.     Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
When I tried to run the same WEBI Report on universe which build on SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
But when I selected the values and tried to run the report. I got below error.
u2018Query 1 - P&L Structure Monthly_Devtst
Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE( { [0CALMONTH].[LEVEL00].MEMBERS } ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR                   1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
My Questions :
1.     What is this error? Please suggest the solution to run the report successfully.
Also I am attaching Print Screens of DEV and Test reports Prompts and Errors.
Here I am using Business Objects XI R2 SP4
I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW ..
Please help me with your valuable suggestions.
Thanks,
Anitha

Hi Ingo,
- the BI Query in the Test system is running correct and all the variables do work ?
     Yes, BI Query is working fine in the Test System and I can see all the variables too
In BI Query I can see values for Calendar Year, Version, Profit Center, Profit Center Hierarchy
- the Universe has all the variables ?
Yes, Universe has all the variables.
- do you see values in the Web Intelligence prompts when you run the report ?
   No,
   I can only see values for the Calendar Year & Version in the Web Intelligence Prompt.
When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
Thanks,
Anitha

The web application at [URL] could not be found.

Hi,
I am trying to run a simple code like finding all the users in the SharePoint site.
But I am seeing this error constantly no matter what I do!!
The Web application at [https://xxxxxx] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
I've looked into all the answers on the forums but still stuck with this error.
I am a beginner in SharePoint, and I am really not sure about the AAM and IIS settings that needs to be set inorder to get rid of this error.
If someone could point me in right direction that targets beginners that would be really helpful.
Also, I noticed that my IIS is blank on the dev server that I am working on with Visual Studio and SharePoint installed on it.
Is this something that is causing this error?
Thanks

Note: you need to enter the SharePoint site URL
To authenticate:
f you are connecting to office 365 then use the following code:
using (srcContext = new ClientContext(txtUrlFrom.Text))
SecureString passWord = new SecureString();
foreach (char c in txtPasswordFrom.Text.ToCharArray()) passWord.AppendChar(c);
srcContext.Credentials = new SharePointOnlineCredentials(txtUserNameFrom.Text, passWord);
if you are using on premise SharePoint 2013 use this code:
using (srcContext = new ClientContext(txtUrlFrom.Text))
NetworkCredential credentials = new NetworkCredential(txtUserNameFrom.Text, txtPasswordFrom.Text);
Example to retrieve data:
Web srcWeb = srcContext.Web;
List srcList = srcWeb.Lists.GetByTitle(srcLibrary);
ListItemCollection col = srcList.GetItems(new CamlQuery());
srcContext.Load(srcList.RootFolder);
srcContext.Load(srcList.RootFolder.Folders);
srcContext.Load(col);
srcContext.ExecuteQuery();
to retrieve users:
Private void GetData(object obj)
MyArgs args = obj as MyArgs;
try
if (args == null)
return; // called without parameters or invalid type
using (ClientContext clientContext = new ClientContext(args.URL))
// clientContext.AuthenticationMode = ClientAuthenticationMode.;
NetworkCredential credentials = new NetworkCredential(args.UserName, args.Password, args.Domain);
clientContext.Credentials = credentials;
RoleAssignmentCollection roles = clientContext.Web.RoleAssignments;
ListViewItem lvi;
ListViewItem.ListViewSubItem lvsi;
ListViewItem lvigroup;
ListViewItem.ListViewSubItem lvsigroup;
clientContext.Load(roles);
clientContext.ExecuteQuery();
foreach (RoleAssignment orole in roles)
clientContext.Load(orole.Member);
clientContext.ExecuteQuery();
//name
//MessageBox.Show(orole.Member.LoginName);
lvi = new ListViewItem();
lvi.Text = orole.Member.LoginName;
lvsi = new ListViewItem.ListViewSubItem();
lvsi.Text = orole.Member.PrincipalType.ToString();
lvi.SubItems.Add(lvsi);
//get the type group or user
// MessageBox.Show(orole.Member.PrincipalType.ToString());
if (orole.Member.PrincipalType.ToString() == "SharePointGroup")
lvigroup = new ListViewItem();
lvigroup.Text = orole.Member.LoginName;
// args.GroupsList.Items.Add(lvigroup);
DoUpdate1(lvigroup);
Group group = clientContext.Web.SiteGroups.GetById(orole.Member.Id);
UserCollection collUser = group.Users;
clientContext.Load(collUser);
clientContext.ExecuteQuery();
foreach (User oUser in collUser)
lvigroup = new ListViewItem();
lvigroup.Text = "";
lvsigroup = new ListViewItem.ListViewSubItem();
lvsigroup.Text = oUser.LoginName;
lvigroup.SubItems.Add(lvsigroup);
//args.GroupsList.Items.Add(lvigroup);
DoUpdate1(lvigroup);
// MessageBox.Show(oUser.LoginName);
RoleDefinitionBindingCollection roleDefsbindings = null;
roleDefsbindings = orole.RoleDefinitionBindings;
clientContext.Load(roleDefsbindings);
clientContext.ExecuteQuery();
//permission level
lvsi = new ListViewItem.ListViewSubItem();
string permissionsstr = string.Empty;
for (int i = 0; i < roleDefsbindings.Count; i++)
if (i == roleDefsbindings.Count - 1)
permissionsstr = permissionsstr += roleDefsbindings[i].Name;
else
permissionsstr = permissionsstr += roleDefsbindings[i].Name + ", ";
lvsi.Text = permissionsstr;
lvi.SubItems.Add(lvsi);
// args.PermissionsList.Items.Add(lvi);
DoUpdate2(lvi);
catch (Exception ex)
MessageBox.Show(ex.Message);
finally
DoUpdate3();
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

The web ticket is invalid

Similar Messages

Maybe you are looking for