The zooming function on the trackpad stopped working on my Mac Air OSX 10.9.3.  I've already checked the trackpad preferences to make sure I didn't inadvertently alter something.

The zooming function on the trackpad stopped working on my Mac Air OSX 10.9.3.  I've already checked the trackpad preferences to make sure I didn't inadvertently alter something.  It worked fine in the morning then when I woke my computer in the afternoon the zoom no longer worked.  I use this function constantly so I hope something is not broken.

Where is zooming not working?

Similar Messages

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • The domain by domain automatic save for the zoom feature in Firefox has stopped working with Facebook, is there anything I can do about this?

    I normaly use the zoom feature with Facebook in order to more easily be able to read and see. I like how the entire page zooms in. Recently, however, the zoom started reseting every time i click myself from any page on Facebook to any other. The zoom simply won't save at all, it just resets to the default value.

    Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/<br><br>
    '''N.B.''' Several of your plugins are out of date which exposes your machine to attack. Please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. <br>
    Also, update Firefox to v3.6.19 by clicking Help | Check For Updates.

  • Help please - have a Nano and a Shuffle and neither are working! The Nano wheel appears to have stopped working - I can't get it to do anything. I've done the reset,it worked the first time but not since. And the shuffle won't sync with my library!

    Hi,
    I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
    So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
    Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
    Thanks

    Hi Bblairjones,
    If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
    Apple Support: iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Regards,
    - Brenden

  • The Print function no longer seems to work in Firefox 6. When typing "Control P" or selecting Print from the file menu nothing happens. No error message, no drop down menu, nothing to select. Help!?

    I can't print, print preview, nothing. I have several printers associated with this computer, including an HP, and PDF creator - none of these appear in a drop down menu, there is no error message, yet these all function fine if I am not on the internet!

    No errors in error console. No effect using *. I tried using the dns name of my localhost both in the Firefox URL and in the javascript and I get exactly the same. I have spent a huge amount of time looking into this issue.
    One thing I noticed is that if I use the examples on the internet (http://arunranga.com/examples/access-control/preflightInvocation.html or http://saltybeagle.com/cors/) they work in the same browser. These examples however, are accessed through HTTP proxies.
    I am wondering if the issue has to do with using the same hostname just with different ports.

  • Transferring photos from my Nikon coolpix s7c  to my mac causes a "communications error" with the camera and will not transfer photos as it has done in the past. Seems to have stopped working with my Mac Lion upgrade?

    iphoto has stopped transferring my photos from my Nikno coolpix s7c camera. Seems like it stopped when I upgraded to Lion? It continues to work with a PC?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • My Epson Printer has stopped working with my Mac Air

    I have asked Epson for support but they keep telling me the obvious about deleting the printer via settings and reinstalling again. There have been several updates from Epson at the same time so there is obviously a problem but this is getting ridiculous now. Has anyone had the same problem and how have you sorted it out.
    My Epson is Office Stylus BX635FWD.
    Thanks

    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite
    Is the printer attached to the computer or is it a network printer?

  • The left side of my trackpad stopped working on my macair

    the left side of my trackpad stopped working on my macbook air,how to fix?

    1) System Preferences > Trackpad > Point & Click > Secondary click > (make sure it is not set to a corner).
    2) Bring your machine in to Apple and have them check to see if your battery is swollen

  • How do I permanently set the zoom-function, so I will not have to zoom every time I open a new tab/page?

    I have recently installed Firefox on my one month old laptop which has a 17" screen. Every time I open Firefox I have to use the zoom-function (ctr +) four times to be able to read comfortably. Every time when I next open a website, or tab, or window I have to use the zoom-function again. This is kind of getting old, fast.
    Is there any way I can set the zoom to a higher/closer setting permanently, so I do not have to use the zoom-function about 50 times everytime I use the internet?
    If you could help me that would be lovely!
    Thanks,
    Kikki

    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • The "D" on my iphone keypad stopped working. Should i return it to an Apple store?

    The "D" on my iphone keypad stopped working. Should i return it to an Apple store?

    No.  Follow the troubleshooting steps that are in the manual...restart, reset then restore if necessary.

  • Some of the keys on my keyboard suddenly stopped working. Has anyone had this happen?

    Some of the keys on my MacBook suddenly stopped working.  Has anyone had this happen? 

    yes.  look over to the right under "more like this".

  • I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work eve

    I cannot get any of the zoom functions to work, period. When Firefox starts up it begins to display the page then it stops and redisplays it. So its like it flashes on for a second then completely regoes to the site, any site. The text zooms dont work even when i try to change the font on the content tab, nothing. I have reinstalled firefox still no luck help,!!!!!
    == This happened ==
    Every time Firefox opened
    == this month ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.2)

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

    I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
    Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
    The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
    I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem.  I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
    I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
    I am in film competition overseas and need to have deliverables in less than a month's time.  I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
    Any assistance would be greatly appreciated.

    Still getting software freezes but found a way to mitigate for the mean time.
    Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
    You will want to highlight Adobe QT32 Server.exe
    Right click and select "End Process Tree"
    You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
    If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
    CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
    Right-click to "End Process"
    No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
    Hope this helps until the bug is fixed.

  • The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, " The operation could not be completed.  The system cannot find the path specified" Resetting preferences did not fix.

    The save for the web function has stopped working in my copy of photoshop elements 12.  I get this message, “ The operation could not be completed.  The system cannot find the path specified” Resetting preferences did not fix.

    my os is windows 7.  elements 12 worked fine for many months then save for the web stopped working

Maybe you are looking for