There are errors on the Tuxedo-client (ULOG) while trying to work with Serv

Hello,
What we have:
1. Tuxedo-server 8.1. (HP-UX)
2. Tuxedo-client 9.1 (AIX 6.1)
3. Java-program
4. C-library which is supposed to work with tuxedo service (server side)
and what we want:
1.Java-program loads C-library using JNI and tries to communicate with Tuxedo service on server side.
2. We get ULOG file on tuxedo-client side with errors which are after tpsend function. Program finishes after time out.
3. We do not have JOLT system installed.
Here are the errors from ULOG-file:
114055.puma!AIX2C2TUX_stain.860250.515.0: 01-19-2011: Tuxedo Version 9.1, 64-bit
114055.puma!AIX2C2TUX_stain.860250.515.0: LIBWSC_CAT:1332: ERROR: Unable to set mode to NONBLOCK
114055.puma!AIX2C2TUX_stain.860250.515.0: LIBWSC_CAT:1085: ERROR: Unable to get reply to unsolicited message request
114055.puma!AIX2C2TUX_stain.860250.258.0: LIBWSC_CAT:1332: ERROR: Unable to set mode to NONBLOCK
114055.puma!AIX2C2TUX_stain.860250.258.0: LIBWSC_CAT:1085: ERROR: Unable to get reply to unsolicited message request
114055.puma!AIX2C2TUX_stain.860250.1029.0: GP_CAT:1241: ERROR: An error occurred in the encryption subsystem code(60)
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1512: ERROR: Unable to generate first diffie-hellman packet
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
114055.puma!AIX2C2TUX_stain.860250.1029.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
114055.puma!AIX2C2TUX_stain.860250.772.0: GP_CAT:1241: ERROR: An error occurred in the encryption subsystem code(60)
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1512: ERROR: Unable to generate first diffie-hellman packet
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
114055.puma!AIX2C2TUX_stain.860250.772.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
I googling for a while but could not get a clue to solve this.
Any help appreciated.
Thanks.
Andrei

Hi Andrei,
First, JNI loading the Tuxedo client libraries is not supported by Oracle. That isn't to say it won't work, it's just that Oracle won't support you. What you are trying to do, access Tuxedo services from Java, is exactly what Jolt is designed to provide and is the Oracle supported way to do this.
That being said, my guess is that the JVM process environment is somehow restricting what the workstation libraries can do with the network as you are getting fundamental networking errors. How you work around this I can't really say.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Similar Messages

I tried upgrading to MountaIN lION HOWEVER i WASNT ABLE TO Install. I then tried reinstallling Snow leopard but once again it will not let me install stating there are errors on the disc. I have run disc repair on disc utility but it wont allow me

I was told to reinstall Snow leopard which I did . More troubles! It then came up cannot iinstall as there are errors. Tried going into disc utilities and repair but once again it stated iin red I cannot proceed. can anyone help me here. Before this was happening my system was slowing right down with the beach ball making an apearance after tapping the mouse or typing text.

So you are trying to reinstall Snow Leopard?
In order to do that, you need to erase your hard drive - you cannot go back to an earlier system without erasing. Make sure you back up your files first. Then insert the Snow Leopard install disk, and restart while holding down the C key. If that does not work, insert the install disk, go to System Preferences > Startup Disk and highlight the install disk > click on restart.
Once you are booted into the install disk, go past the language selection and then to Utilities in the menu bar. Use Disk Utility to repair the drive (just in case), erase it and then install. After that, eject the disk and update to the latest 10.6.8.

I was trying to open a project in adobe flash pro cc and it said there was an error opening the project. I have tried multiple times with no success, however all my other projects open and work fine

I tried multiple times, but still couldn't open my project. All my other projects open and work fine. Please help, it is important.

You will most likely get better help in Flash Professional
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

The document could not be saved. There is error reading the document(23).

HI ,
Im getting error : the document could not be saved. There is error reading the document(23).
Had tried de-select "Save As Optimizes for Fast Web View". error still persist.
Pls help. Thanks

Hi,
I am moving your posting at Acrobat.com forum to Acrobat forum.
Hisami

Is there any way to judge whether two streamings are casted by the same client?

Hello,
My app use two different streams to send video and audio from flash clients to the server.
So another client need to judge whether two streamings are casted by the same client or not.
Is there any way to do this?
For example, if it is possible to get ip address from netStream instance, it will be a solution.
Could anyone teach me this?
Thanks in advance!

From the FCP 7 User Manual. You can access your copy of the Manual through the HELP menu on the menu bar at the top of your main screen.
x
Subtract Composite Mode
Subtract darkens all overlapping colors. Whites in the foreground image go black, while whites in the background image invert overlapping color values in the foreground image, creating a negative effect.
Blacks in the foreground image become transparent, while blacks in the background image are preserved.
Overlapping midrange color values are darkened based on the color of the background image. In areas where the background is lighter than the foreground, the background image is darkened. In areas where the background is darker than the foreground, the colors are inverted.
The order of two clips affected by the Subtract composite mode is important.
Difference Composite Mode
The Difference composite mode is similar to the Subtract composite mode, except that areas of the image that would be severely darkened by the Subtract composite mode are colored differently.
The order of two clips affected by the Difference composite mode does not matter.

PCP0- Error:Data gap -- There are results of the latest payroll

Hi experts! I need your help!
When viewing a receipt book (PCP0) in the HR account " personal loans", for a particular document number , I canu2019t view the detail of the accounts and it shows me the following error "Although the implementation NNNN has been productive, there are results of the latest payroll. Data gap. "
I noted that this is properly accounted for on the side of HR. Through the FB03 worked properly, we could see the details and the master account are not affected.

No, the only metadata that Kodo stores in a default configuration is a
list containing all the classes registered in the data store.
When developing with enhancers, it is relatively easy to get things into
a strange but seemingly valid state. Consider the following example:
- create persistence-capable classes with non-private fields and
compile them to .class files.
- compile non-persistence-capable classes that access the
non-private fields in a persistence-capable class.
- enhance your persistence-capable classes, but not your
persistence-aware classes (the classes that directly access fields
in persistence-capable classes)
At this point, you will likely get all sorts of class verification
errors at runtime, as the enhancer makes all JDO fields private, and
replaces accesses to the fields with enhancer-generated setters and
getters of the same visibility as the original field.
While this was not the exact problem that you saw, it is one example of
inconsistencies created by the build process. If you follow the
following steps, you should reduce mysterious Kodo-related errors:
- make all your JDO fields private, and provide your own setters and
getters for them. By doing this, you will not have to jdo-enhance
any classes but the persistence-capable classes, as all non-pc
classes will access data through your methods. Note that you can
refer to private fields directly within the defining class just as
usual.
- recompile and re-enhance all the persistence-capable (and
persistence-aware, if any) objects each time you compile. This is
a bit slower, but can save lots of nightmares.
Also, I find that compiling all .class files into a separate build
directory (with 'jikes -d $builddir' or something) helps keep everything
working smoothly, as you know where all your .class files are and you
can easily blow them away if things start behaving strangely.
-Patrick
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com

There were errors installing the software

Mac Mini G4 1.25GHz / 512MB / 40GB / Combo / Modem.
Ser: YM6***TAB
<Edited by Moderator: Personal Info - Please See Terms of Use>
Originally Mum's Mini was "doing strange things", so I had to drive 150 miles to try to sort it out.
First I downloaded AppleJack and tried it out on my own G4 Tower before heading north to visit Mum. Applejack installed OK from my USB memory stick.
Unfortunately, it didn't occur to me to take a spare keyboard and I was unable to get her Mac Mini (with a miniature keyboard) to respond to any key presses at start-up, which foiled all attempts to use AppleJack or even single user mode!
However, I was able to use DiskWarrior and it found several corrupted files on the Hard Drive, which it claimed (after two attempts) were repaired. I then "repaired permissions" and ejected the DiskWarrior disc. Then I had the bright idea of going to "Software Update" in the Apple Menu. This downloaded the latest OS10.4.11 and started to install it. After 20 minutes it reported that there was a "problem with installation" and I should reboot and try again, which I did, with the same result. So then I had the amazingly bright idea of erasing the drive and installing 10.4 from the original DVD. This got several minutes into the procedure before reporting a problem. "There were problems installing the software".
I gave up at that point, left Mum my iBook to use and brought the Mac Mini home.
I was able to boot it up from an external Firewire HD, which contained a clone of the boot drive from my own G4 Mac Mini. It seemed to work OK so I tried the Tiger installation DVD again. It failed as before but I was able to save the Crash Log onto the Firewire Drive and you can view it here:
http://www.amstard.co.uk/temp/OSInstallCrashLog.txt
(I hope this means something to somebody! The way I interpret it is that it installed a file then discovered that file was corrupted?)
I used Prosoft "Drive Genius" to erase the internal Hard Drive again and it reported that all was well. But I still couldn't install the OS.
After that, I couldn't even get the Mac Mini to boot from the external Firewire drive. It just produces a black oblong on a gray screen with a stalled "cog wheel". Here's a photo that I took:
http://www.amstard.co.uk/temp/screenphoto.jpg
There is nothing connected except the standard USB keyboard and mouse at this point and the external Firewire drive.
It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
I have "zapped the PRAM" without making any difference to this symptom.
I have tried doing the simplest installation without any additional fonts, language translators or bundled software.
Any suggestions - apart from "scrap it!"?
Martin (UK)

It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
Since this is an original G4 mini, there is no reason at all that any full retail 10.4 installer, or the original MacOS installer that came with the mini would not work. Later minis, released after Tiger's release date were in some instances unable to boot from the early versions of the Tiger retail installer because 10.4.0 or 10.4.1 pre-dated the versions those minis came supplied with, but clearly that isn't the case with your system.
If you are certain that the MacOS install disk you have is the one that original one that came with the mini (which should be a late version of MacOS 10.3.x), then the only obvious thing to check is that you have correctly partitioned the drive (it should be partitioned in the Apple Partition Map scheme, and then formatted as MacOS Extended (Journalled). If those parameters are met and you continue to get the error from a valid installer for that system, then the potential causes narrow to such things as defective install disks (unlikely since you have tried more than one), defective optical drive unlikely because you can boot from the install disk using the drive), or defective logic board/disk controller - which is a distinct possibility since it's possible that was responsible for the first drive failure (or the indications of failure).
Boot the system using the original MacOS installer and using Disk Utility, set the new internal drive up again with the APM partitioning and MacOS Extended (Journalled) formatting, then immediately run the 'Repair Disk' tool on it to make sure the drive is being read and written correctly. Then performa PMU reset (instructions below) to ensure that the failure to boot from the external FW drive is not a simple matter of dropped FW port. On rebooting with your FW drive connected, hold the Option key down to see if the system then recognizes your external drive. If it does, select it and attempt to boot from it.
With luck that will give you a working system, booted from your external, at which point I would then see if it's possible to clone your external to the new internal drive, rather than attempt a reinstall from the MacOS installer.
On the face of it there should be no reason that would not work since by booting from the MacOS installer you basically show that the system is sound and the optical drive is working. By partitioning and formatting the internal drive and getting a clean bill of health from the repair disk tool, you show the drive and disk controller are OK. That doesn't leave much else to be at fault!

Every time I convert a CVI project to Visual C++(6.0) project, there are errors: easyio.fp, fieldpoint.fp,niimaq.fp

Every time I convert a CVI project to Visual C++(6.0) project, there are errors:
Wizard was unable to locate the following function panel modules referenced by your project: easyio.fp
Wizard was unable to locate the following function panel modules referenced by your project: fieldpoint.fp, niimaq.fp
what's the problem?

Every time I convert a CVI project to Visual C++(6.0) project, there are errors:
Wizard was unable to locate the following function panel modules referenced by your project: easyio.fp
Wizard was unable to locate the following function panel modules referenced by your project: fieldpoint.fp, niimaq.fp
what's the problem?

"There were errors installing the software. Please try again"

I have decided to sell my iMac and G4 iBook, in order to buy a Macbook Pro. I have two people interested, but only if both computers are formatted and as they were when they left the factory.
I erased all my files from both computers, leaving just the system files. I placed the instalation disk for OS X into my iMac (The disk that came with it) and selected instal. I chose the option to delete the current settings and instal a fresh version of OS X.
I hope that makes sense so far.
Anyway after a while, disk 1 had finished, and I was told to insert disk 2. I inserted disk 2, only for half way through the instal process, to be greeted by "There were errors installing the software. Please try again". I have now tried 14 times. I have officially given up.
I have searched these forums for an answer, but it seems as though other people have done things such as, installing other software, or hardware, and that is the cause of the problem. However I have done none of the above. I have tried searching the Mac Support pages, with no luck.
Can anyone help?

I suggest you do the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Now try installing OS X. If you still have a problem then it's possible the hard drive is bad or the installer discs are damaged (or possibly just dirty and need a gentle cleaning) or there's a problem with the optical drive.

Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca

Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 77 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.8E774FP-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Errore irreversibile durante l'installazione.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\Claudio\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -----------
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2710)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2726)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2728)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2734)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2736)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2738)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2740)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2742)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2746)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2748)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2750)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2752)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2754)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2756)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2770)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2784)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2790)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2792)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2794)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2796)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2798)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2800)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2802)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2804)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2818)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2820)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2822)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2826)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2836)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2838)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2840)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2842)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2844)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2846)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2848)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2854)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2864)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2866)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2870)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2892)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2894)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2896)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2928)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2938)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2958)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2980)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 2998)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3018)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3020)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3022)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3024)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3026)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3028)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3066)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3072)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3074)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3084)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3094)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3118)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3156)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3158)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3160)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3162)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3164)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3166)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3168)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3172)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3174)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3176)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3186)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3196)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3198)
ERROR: DS012: LocalizeFile:Localized string not found for locale 'it_IT'(Seq 3214)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed

发自我的 iPhone
在 2013年10月14日，6:46，dell 2713 <[email protected]> 写道：
Salve. Conìmparsi these are errors during the instalation of Creative Suite 5.5 on Win 7 pro. How ca
created by dell 2713 in Downloading, Installing, Setting Up - View the full discussion
Exit Code: 6

Service_doctor.sql -- There are errors in one or more PL/SQL package

Hi,
Script service_doctor.sql is run through repository owner. It is giving following error message.
There are errors in one or more PL/SQL packages and functionPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
Connection information stored within the repository is correct
PL/SQL procedure successfully completed.
Please guide me what can be done to solve the error.
Thank you in advance.
Amit Shah.

Hi Amit,
I am facing this error every time I run the service_doctor.sql. After that once I have executed this script -- select * from user_errors -- to see what possibly could be wrong. It returned me one procedure name -- WB_OLAP_LOAD_DIMENSION_GENUK. But I was not very sure what to do with this.
Now also I am getting the same error --- >>>>>> There are errors in one or more PL/SQL packages and function. But it didn't stop me from doing anything in OWB / Process flow / Workflow environment and I can work fine.
Just wanted to share this with you. However, the result that you are getting shows (>>>>>> The platform service is not available) that Control center service is not up. Please execute the start_service.sql and after that it you run service_doctor again, you'll get only the first error -- >>>>>> There are errors in one or more PL/SQL packages and function --- but that shouldn't stop you from doing anything in OWB.
If anyone knows what causes the --- >>>>>> There are errors in one or more PL/SQL packages and function -- error, and what are the implications of this in OWB environment, and what is the solution to it, please do share.
Cheers,
Swagata

"There are errors in one or more PL/SQL packages and functions"

Hi all,
first of all - my configuration:
- OWB 10.0.3.0
- one Server HP-UX
- two oracle database instances (plato and platodev)
My problem:
when i try to start "Deployment Manager" and try to connect to the platodev instance i get the RTC-5260 and ORA-01017.
I have no problems to connect to the second instance "plato".
The output of service_doctor is as followed:
===================
SQL> @service_doctor
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is available
There is a problem accessing the service startup script from the databaseserver
Here is the detailed error message which contains the name of the startscript file:-
The runtime property 'service_command' either does not exist orcannot be read successfully
oracle.jdbc.driver.OracleSQLException: ORA-00942:
table or view does not exist
Please verify that the disk containing the file is visible to thedatabase server
Please verify that the database server account has access rights on thefile
There is a problem with the repository connection information used tostart the service
Here is the detailed error message which contains the connectioninformation passed to the service:-
Cannot retrieve the repository owner host, port, service-name fromwithin the database server
Please verify that this information is accurate
If this information is correct, then please use the'set_repository_password.sql' script to reset the stored password
PL/SQL procedure successfully completed.
================================0
I did not change the password.
Can anyone help me?
I appreciate your help.
Thank you

Solved!
It was a wrong entry in wb_rt_service_nodes column service_name.

(1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??

(1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??
I type Sandi Patty. It changes it to Sandi patty. (Little "p") There are some pics in there correctly capitalized and some that aren't. So, I deleted all the faces with incorrect spelling hoping to clear the system of that name completely. Didn't work. As you type Sandi, all the choices, including the one with error in capitalization show up. I type it CORRECTY -- Sandi Patty -- I click on another face and the Sandi Patty becomes Sandy patty. (Little P) There are other names in the list that were the result of bad spelling. Can these NOT be deleted??

Not at this time, I spent an hour on the phone with Apple support today on this topic and they could not locate the files necessary to delete names from the list. Bummer

IPhone 5 stuck on home screen and there are codes at the top??

So I plugged the phone in and it started charging like it should. When it had enough juice the Apple logo flashed and it should'be pushed me to the main screen of my iPhone. Instead it stayed on the start up screen with the apple logo and there are codes at the top of the screen that start with [nand]. There are about 10 rows of it. What should I do?

This error is hardware related and you should get the phone serviced by visiting an Apple Store or an Authorized Apple Service Provider.
iPhone - Contact Support - Apple Support

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

There are errors on the Tuxedo-client (ULOG) while trying to work with Serv

Similar Messages

Maybe you are looking for