There is no active nametab in the system???

Hi
When i excuted my program i am getting a message which is given below.
Thee is no active nametab in the system, although an active ABAP/4 Dictionary object was expected.
What might be wrong?
Regards,
LijoJoseph

Hi Anand,
I am not using any customized table. As you said, i am using a Function module to explode the BOM. I am usinf this FM in my Customized FM. and also i am using one customized FM as a header for my report.
Like this
Report
ZPP_VALID_REL_ORDER - to find whether a order is valid
ZFM_MATNR_VERPR - To find Moving average price.
CS_BOM_EXPL_MAT_V2 - To Explode BOM
ZCA_REPORT_HEADER - To give Header for Report
Can you help me now?
Regards,
Lijo Joseph

Similar Messages

Report showing the number of active users in the system

All,
There is a standard SAP report which shows the number of active users in the system (output same as AL08).
Does anyone remember this?
Cheers,
Bidwan

Hello Bidwan,
Are you talking about the report RSUSR000?
Regards.
Ruchit.

There is already a transaction for the systems of this product version(MOPZ)

Hello All,
I am trying to configure maintenance optimizer in Solution Manager 7.0
on Windows 2003 server and SQL 2005 server.
I am configuring this for SAP CRM 2007 server.
Created the server, database and system in SMSY
Created Logical Component in TA code SMSY
SM59 connection for SAP-OSS is OK.
S-User is assigned to a User.
Created a solution using TA code solution_manager.
Defined the product version for the solution created in the TA code
solution_manager.
When creating a Maintenance Optimizer transaction, I select the
product version and its logical component in the Plan Maintenance
(Phase) and click on Continue to go to Select Files Phase, I get below
warning:
Information Procedure 8000000130 Saved
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
I cannot get pass this phase.
I have deleted and recreated the solution, carried out the same
activity again but its giving the same Warning
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
Any help will be appreciated???
Regards,
Satish.

Hello Ragu,
Thanks for your response.
As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
I was successful in configuring CRM and SOLMAN.
But when I tried to configure in ECC, it failed due to RFC erros.
So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
Please let me know if you need further information.
Regards,
Satish.

Active workflows in the system

Hi all,
Is there any way I can find all the active workflow in the system at table level??
Kr
Vithal

Hi Vittal,
Could you please state what exactly is the requirement to do that?
At user level you can get the curret workitems assigned to a user from table SWWUSERWI.
Check this table for all users.
Regards,
Saumya

How to find the active workflows in the system

Hi,
we are going for upgrade, we want to find out the active workflows in the system
please guide me, how to find the active workflows in the system
is there any standard table to find the active workflows in the system
please suggest me the step by step process to find the active workflows.
thanks,
chandra

Welcome to the Forums.
Please go through the FAQ of the Forum.
You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
Please try {forum:id=1050}.
Regards,

Main optimizer error - There is already a transaction for the system

Hi Guru's,
I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
'There is already a transaction for the system of this product version'
After this error, it does not proceed further.
There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
Any ideas or solutions most welcome.
Moses

As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
Best regards,
Joachim

Active transaction for the systems of this product version

Hi All,
When i tried to create a new transaction for maintenance optimizer, I received the warning below:
There is already a transaction for the systems of this product version
The solution from note 1296589 does not help.
Transaction code /n/tmwflow/maintenance only show one open session (the current session).
Regards,
KayJay

> When i tried to create a new transaction for maintenance optimizer, I received the warning below:
> There is already a transaction for the systems of this product version
What happens if you click on the button "Maintenance transactions" just next to the "new Maintenance" button?
Markus

The installed file can not be activated. Since the system does not perform the registration. What can I do?

The installed file can not be activated.
Since the system does not perform the registration.
What can I do?

I have the same issue. When trying to open the acrobat XI Pro for the first time, you are obligated to sign in with your account. But signing in is taking about an hakf hour now, while I have no problems signin in trough adobe.com with the same username and password.

Is there any function module to Change the System Status

Dear ABAPers,
I am working in the Customer Service Module.I want to change the System status.
Is there any function module to change the System Status.
Thanks & Regards,
Ashok.

Hi Ashok
Service Order status update function module ?
How to set the system status
Check above threads,
Regards,
Syf

My newest iMac from a year ago is showing signs of slowing down its processing capability. Notice it especially in Aperture where I get the whirling dervish thing sometimes for a minute or more and once it crashed. Is there a way to "clean up the system"?

My newest iMac from a year ago is getting very sluggish. I notice it particularly in Aperture. I get the whirling dervish thing going on an operation sometimes for many seconds, even a minute or more and once it just crashed and I had to restart with the button. So I'm wondering if there is some way to "clean up the system" that is built into the iMac or if there is a reliable app I can obtain that will clean things up. I'm supposed to have a super fast processor in this version of iMac and lots of hard drive space and RAM. What gives? Any suggestions?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

I want to recieve FAX on my MAC desktop but there is no fax tab in the systems:printers and faxes

I have a MAC laptop and want to recieve faxes on my computer, but the Systems: printer and fax tab does not have a faxes choice. what do I need to do to set it up?

You need a phone line and a USB dial-up card. Otherwise use an online service such as eFax.
Or the modern equivalent is to get a scan/PDF of the file.

E-Recruitment - How do I determine what an activity does in the system?

Can anyone shed some light on how to determine information on activities? Example like 0010 Check Suitability etc. Any docs anywhere? Thanks

What an Activity does depends on how you categorize it in the IMG. For example 0010 Check Suitability is a Simple Activity. Heres a brief explanation of how some of the Activity Categories work.
Simple Activity
This is like a simple checklist. There is no system functionality behind it. Once the activity is done you mark it as complete.
Qualifying Event
These are similar to Simple Activities. There is no functionality for these activities alone, but in completing these activities, like a Job Interview, you complete fields that can be used in an invitation to the event.
Simple Correspondence
A letter form (SmartForm) is assigned to activity types of this category. These activity types enable letters to be sent via the Internet, to be printed by an R/3 system, or to be edited locally at the front end.
Invitation
A letter form (SmartForm) is also assigned to activity types of this category. In addition, the activity types always refer to a qualifying event that is open for invitation. It uses information in the Qualifying Event (time & location) to complete the invitation. The documents can be processed in the same way as simple correspondence.
Status Change
Activity types of this category change the status of the associated object. You can define the new status per activity type and per object type. Status changes also initiate Workflow
Questionnaire
Questionnaire can be assigned to activity types in this category. These activity types enable questionnaires to be sent to candidates using the Internet or to be included in the application wizard through a Process Template.
I found the documentation in the IMG to be quite helpful in this area. I hope this helps.
John

Is there a real way to increase the system font size yet?

I got a new Mac Pro (2013 model) to use with my Dell U2711 monitor which has a native screen resolution of 2560x1440. After spending some significant time fighting with cables (HDMI and DVI will not allow for full native resolution due to a Dell issue, only Display Port works), I finally got my screen working at the full native resolution. Since I am going from a previous resolution of 1920x1080, as you can imagine, the text is pretty small.
I am running OS X Mavericks 10.9.1.
I searched the forums for a way to increase the default font size and found a ton of posts, but most posts were older or got the response "Change your screen resolution" which translates to "Drop your resolution to a non-native and clearly inferior mode" or buy some special computer reading glasses. These are not real solutions for me. I do professional photo editing so being able to have a high screen resolution is important. With a great OS I would think there would have to be a way to increase the font size. (Surely if Windows can do it, so can Mac OS). I know I can do it for some individual applications like iTunes, Safari, Chrome, etc. But I can't find a way to increase it for apps that don't have a font size option or for default mac applications like the action bar. Is this an issue that just keeps being ignored or is there a solution yet?
With 4K displays already on the market and 8K ones being shown off at CES, if we can't control the default font size, are the next set of solutions going to be "Go buy a really big magnifying glass"? If the current answer is still that I'm SOL, could we please get some feedback to the product group that this is a real issue and it's only going to get worse with higher res monitors coming. I don't think many people will be happy dropping their 4K displays to 1080 resolution or lower just so they can read the text.

Download and run the free application TinkerTool (not "TinkerTool System"), select the Fonts tab, and change the font sizes.

There is no Accessibility choice in the System Preferences to allow a change to transparency

When I first installed Yosemite I chose to reduce the Transparency (I think?) but I have tried going back to check but am unable to find the Accessibility icon shown below next to Time Capsule..
There is an Accessibility icon in Security & Privacy, but this does not possess the options for Transparency etc. as shown in this screen capture. I am totally dumbfounded!

Hey dennisfrombingley,
It may be that the Accessibility icon is hidden. If so, it can still be accessed via the View menu in System Preferences. You can also choose the "Customize..." option from the View menu to select which icons appear in System Preferences.
Customize your view of System Preferences
https://support.apple.com/kb/PH14362
Cheers,
Allen

Active datasource in the system

Hi,
How to know how many datasource active in bw system.
And it is full load or delta load.
I want to get a list from the system

table roosource
and if you want to know if they are mapped...table RSTSRULES

There is no active nametab in the system???

Similar Messages

Maybe you are looking for