There is no clutser control instance running on host

Hi
I am getting following error message when deploying packages through SDM
Jun 9, 2009 12:29:53 PM Info: Software type of SDA: J2EE
Jun 9, 2009 12:29:53 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Jun 9, 2009 12:29:53 PM Info: Starting cluster instance processes.
Jun 9, 2009 12:29:53 PM Error: An error occured while starting a cluster instance.
Jun 9, 2009 12:29:53 PM Error: There is no clutser control instance running on host SBPEPCI1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JC_CPCAPP117_EPP_04
Host:CPCAPP117
Name:JC_CPCAPP115_EPP_03
Host:CPCAPP115
Name:JC_CPCAPP114_EPP_00
Host:CPCAPP114
Name:JC_CPCAPP112_EPP_02
Host:CPCAPP112
Name:JM_T1244432033820_0_CPCAPP109
Host:SBPEPCI1
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
Please check if there is an appropriate running cluster instances.

Issue got resolved by changin following paramter in Secure Store
admin/host/<SID>
I replaced above virtual hostname entery by actual hostname.
Message itself gives hint for not finiding server cluster name. there was mismatch between clsuter name specuified in secure store & information given by message server
Jun 9, 2009 12:29:53 PM Error: An error occured while starting a cluster instance.
Jun 9, 2009 12:29:53 PM Error: There is no clutser control instance running on host SBPEPCI1 which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SBPEPCI1; MS port: 3900], are :
Name:JC_CPCAPP117_EPP_04
Host:CPCAPP117
State:5
HostAddress:172.17.134.50
Name:JC_CPCAPP115_EPP_03
Host:CPCAPP115
State:5
HostAddress:172.17.134.48
Name:JC_CPCAPP114_EPP_00
Host:CPCAPP114
State:5
HostAddress:172.17.134.47
Name:JC_CPCAPP112_EPP_02
Host:CPCAPP112
State:5
HostAddress:172.17.134.45
Name:JM_T1244432033820_0_CPCAPP109
Host:SBPEPCI1
State:5
HostAddress:172.17.131.38
Name:JC_CPCAPP109_EPP_01
Host:CPCAPP109
State:5
HostAddress:172.17.131.31

Similar Messages

CTS + error during deployment There is no cluster control instance running on host

We are running our QA portal in a cluster (3 hosts..one for MS, 1 for ERS, 1 for JC). The alias for the JC is <jcalias> and the real name of the host is <clustername1). So depending on which component is one which of the 3 cluster hosts wil dictate which host <jcalias>.
But when trying to deploy a portal archive via CTS+, we get error:
Jul 24, 2014 11:18:12... Error: An error occured while starting a cluster instance.
Jul 24, 2014 11:18:12... Error: There is no clutser control instance running on host sapepqci which is described in SecureStorage .
The instances, returned by MessageServer [MS host: <msalias>; MS port: 3912], are :
Name:JM_T1405698721103_0_<clusterhost1>.viacom.com Host:<clusterhost1>                                                        HostAddr: aaa.bbb.ccc.ddd State:5
Name:JC_<jcalias>_EPQ_14                       Host:_<clusterhost1>.                                                        HostAddr: aaa.bbb.ccc.ddd
State:5
Name:JC_<appsrvr1>_EPQ_00                     Host:<appsrvr1_IP>                                                   HostAddr: <appsrvr1_IP>
State:5
Name:JC_<appsrvr2>_EPQ_00                     Host:<appsrvr2_IP>                                                    HostAddr: <appsrvr2_IP>
State:5
Please check if there is an appropriate running cluster instances. For more inforation check CSN Note 1276366
Jul 24, 2014 11:18:12... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
I have checked the referenced not. The profiles all use the JCALIAS as the host name, and in the configtool secure store it's also specified in admin/host/<SID>
If I change it in the secure store to the real name (clusterhost1) that the message server is giving, it will probably work. But what happens in the future when, after a cluster resart, <jcalias> gets assigned to <clusterhost2> instead? I'd rather be able to use the alias in secure store and for the message server to pick that name up and use it.

Hi David
Jul 24, 2014 11:18:12... Error: An error occured while starting a cluster instance.
Jul 24, 2014 11:18:12... Error: There is no clutser control instance running on host sapepqci which is described in SecureStorage .
You cluster resources are online?
BR
SS

There is also a Beehive community running on the linkedin business network

This provides a more appropriate environment for people to share contacts, opportunities etc around Beehive.
[http://www.linkedin.com/groups?gid=109283&trk=hb_side_g]

Hi David
Jul 24, 2014 11:18:12... Error: An error occured while starting a cluster instance.
Jul 24, 2014 11:18:12... Error: There is no clutser control instance running on host sapepqci which is described in SecureStorage .
You cluster resources are online?
BR
SS

Best way to control and run multiple (up to 20) processes independantly in LV

Hi all,
I'm trying to build an application in LV to independantly control and run multiple (up to 20) processes, ie, it should be able to start and stop any of the processes at any given time. What would the best way to code for this? Off the top of my head would be to use a unique notifier to control each of the process, but I'm thinking that the code upkeep may be a handful with this number of notifiers being defined. Are there better ways of doing this?
Appreciate any help and insight on this.Thanks a bunch in advance!
Solved!
Go to Solution.

I forgot some more important questions:
How large is your development group?
How much "discipline" do you want to program into the Process Commands framework? For instance, is it OK for any VI to command a process into a certain state, or should your program generate a broken wire or run-time error if a command is sent from a non-authorized source?
Where do your needs fall on this spectrum: simplicity that gets the job done and the product out the door and will probably not need much maintenance or upgrading, or flexible framework that will likely undergo multiple upgrades or fall into the hands of multiple developers?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Is there a way to control access by IP Address?

I'd like to follow up on this question using WLS 6.0/6.1.
What I need to do is block access to a set of directories to public IP
addresses. My usual approach would be to tweak the webserver
configuration to deny the requests, but I can't seem to find
documentation on how to accomplish this.
So, if approach this with a ConnectionFilter, I can look at the
ConnectionEvent's getRemoteAddress() method to determine whether the
requestor is public or trusted, but can I get enough information from
getProtocol() method to determine which directory they're requesting?
Thanks,
Matt Kleiderman
Alvin wrote:
Hi,Michael,
Is there any way to control access to a particular application by ip address?
For instance, there are multiple applications reside on the same WLS, some can
be accessed publically, some only can be accessed by users from a certain ip address?
The example you mentioned only applys to the whole WLS.
Thanks.
"Michael Girdley" <[email protected]> wrote:
Yes:
http://www.weblogic.com/docs51/classdocs/javadocs/weblogic/security/net/Conn
ectionFilterImpl.html
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Mitchel Lang <[email protected]> wrote in message
news:[email protected]..
I was wondering if there is anyway to restrict access to WLS 5.1 by
IP
Address?
I have a NES Server with SSL running communicating with a WLS server
through
the NASPI proxy. In order to maintain SSL we do not want anybody going
directly against the WLS.
Any Ideas would be helpful.
Mitchel Lang
Mgr. Application Architecture
Time Inc.
212.522.0748
[email protected]

I am trying to launch Firefox 9.0.1 on Windows 7 but the application window isnt visible even though there is a firefox.exe process running in task manager.

I am trying to launch Firefox 9.0.1 on Windows 7 but it isnt working. I try to launch it and the application window does not show. When I look at the task manager and then look at the Applications tab, Firefox isnt listed. If I go to the Processes tab, there is a firefox.exe*32 process listed. Each time I double click the Firefox icon, a new firefox.exe process is spawned but there is never a visible instance of the Firefox application.
There are no errors in the application logs. I end up just having to kill the processes.
I tried launching in safe mode by holding down the shift button but the same thing happens.
Any suggestions on what to try? It has never worked since upgrading from version 8. I tried un-installing and re-installing

I went through everything mentioned in the link you posed and nothing detailed there resolved the problem.
The Profile folder didnt exist so I created it. Made sure the perms were good and that it was not read only.
There are no default folders appearing under the profile folder when I start Firefox.
I have Firefox installed to my E drive.
Nothing happens. The process appears in the task manager but no application shows up.
Cant start it in safe mode, cant run the profile manager.

HT4759 I want to use icloud mail on both iPhone 4s AND my pc. icloud mail on PC is mega glitchy and frustrating because my PC is ancient, I run XP, & these DO NOT MEET req's for iCloud. Is there a email platform that will run well on both XP and iPhone?

I NEED to use icloud mail on both iPhone 4s AND my PC. I need to use both.
Trying to use icloud mail on PC is mega glitchy (STOP SCRIPT WARNINGS EVERY FEW MINUTES) and frustrating because:
1. my PC is ancient (but nicely refurbished/fast)
2. I run XP (with both Firefox and Chrome- newest versions)
3. thusly, I DO NOT MEET SYSTEM REQUIREMENTS for iCloud.
In my passed attempts I found that
1. Yahoo doesn't work well on iPhone
2. Gmail doesnt work well on iPhone.
I must be missing something... an app or... maybe a donated/ NEW FREE MAC! (That would be sweet! Ha.)
Is there an email platform that will run well on both XP and iPhone?
or... Please say it isn't true: I would love a Mac tablet or desktop. We have no money for a mac. SOL? Is this iCloud apple tech only for wealthy middle class and above who can afford to have the newest and best of everything?

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

IIRC, OPTION-click on the Apple icon on the menu bar and select either Restart or Shutdown. Alternatively,
Control-Command-Eject
Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
Control Option-Command-Eject
Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer

SQL 2012 SP2 There are no SQL Server instances or shared features that can be updated on this computer

Hi,
I have a SQL Server instance:
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
May 14 2014 18:34:29
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
I am trying to install:
SQLServer2012SP2-KB2958429-x64-ENU
On the "Select Features" screen of the setup I get an error message when I try to click next:
"There are no SQL Server Instances or shared features that can be updated on this computer."
I've checked and re-checked the release notes - pretty sure I have the right versions of everything:
https://msdn.microsoft.com/en-us/library/67cb8b3e-3d82-47f4-840d-0f12a3bff565?f=255&MSPPError=-2147217396
Any help appreciated!
Cheers
Lucas
LucasF

Hi,
I have a SQL Server instance:
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
May 14 2014 18:34:29
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
I am trying to i
LucasF
Your SQL Server 2012 is already at SP2 see version number 11.0.5058 this corresponds to SP2. So when you run the setup it says there is nothing to upgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

There is an insufficient memory to run this query.

I am getting an error :
there is an insufficient memory to run this query Error: 701, Severity: 17, State: 42
The instance is SQL 2005 instance with SP2.
Please help.

SQLServer 2005 SP4
I have a same problem getting the error
2014-06-04 17:52:08.77 spid104     Error: 701, Severity: 17, State: 123.
2014-06-04 17:52:08.77 spid104     There is insufficient system memory to run this query.
2014-06-04 17:52:08.78 spid104     Error: 701, Severity: 17, State: 130.
2014-06-04 17:52:08.78 spid104     There is insufficient system memory to run this query.
Our queries are running so slow already.
2014-06-04 17:52:08.85 spid5s
Memory node Id = 0
   VM Reserved = 1186200 KB
   VM Committed = 218572 KB
   AWE Allocated = 15843328 KB
   SinglePage Allocator = 263344 KB
   MultiPage Allocator = 21752 KB
2014-06-04 17:52:08.85 spid5s
MEMORYCLERK_SQLQUERYEXEC (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 25792 KB
   MultiPage Allocator = 1040 KB
2014-06-04 17:52:08.85 spid5s
MEMORYCLERK_SQLOPTIMIZER (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 29360 KB
   MultiPage Allocator = 384 KB
2014-06-04 17:52:08.85 spid5s
MEMORYCLERK_SQLUTILITIES (Total)
   VM Reserved = 960 KB
   VM Committed = 960 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 37672 KB
   MultiPage Allocator = 0 KB
2014-06-04 17:52:08.85 spid5s
MEMORYCLERK_SQLQERESERVATIONS (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 408408 KB
   MultiPage Allocator = 0 KB
2014-06-04 17:52:08.85 spid5s
CACHESTORE_OBJCP (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 51352 KB
   MultiPage Allocator = 760 KB
2014-06-04 17:52:08.85 Server
Memory node Id = 0
   VM Reserved = 1186200 KB
   VM Committed = 218572 KB
   AWE Allocated = 15843328 KB
   SinglePage Allocator = 263360 KB
   MultiPage Allocator = 21752 KB
2014-06-04 17:52:08.85 spid5s
CACHESTORE_PHDR (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 20832 KB
   MultiPage Allocator = 136 KB
2014-06-04 17:52:08.85 Server
MEMORYCLERK_SQLQUERYEXEC (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 25792 KB
   MultiPage Allocator = 1040 KB
2014-06-04 17:52:08.85 Server
MEMORYCLERK_SQLOPTIMIZER (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 29368 KB
   MultiPage Allocator = 384 KB
2014-06-04 17:52:08.85 Server
MEMORYCLERK_SQLUTILITIES (Total)
   VM Reserved = 960 KB
   VM Committed = 960 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 37672 KB
   MultiPage Allocator = 0 KB
2014-06-04 17:52:08.86 Server
MEMORYCLERK_SQLQERESERVATIONS (Total)
   VM Reserved = 0 KB
   VM Committed = 0 KB
   AWE Allocated = 0 KB
   SM Reserved = 0 KB
   SM Committed = 0 KB
   SinglePage Allocator = 408408 KB
   MultiPage Allocator = 0 KB

[Urgent!!]How to control the running time??

Hi,
I'm an undergraduate researcher in the University of Michigan. I used NI labVIEW FPGA on my current project and now i meet a problem.
I have a labview code that has runs with 3 subroutines. they execute one after another for a given time period for each iteration of the entire code. that is i built them in a flat sequence structure inside a large while loop and each of the subroutine is a while loop with several subvi's in it. not that complicated but i have to specify how long each subroutine runs. now i have a problem to set that execution time. i don't know exactly what kind of timing function i shall use. i tried the "Elapsed time" function but that only works for the first iteration. from the second iteration on each subroutine only runs for once, instead of continuing to run until the given time elapsed. so i don't know how to correctly control the running time. It's reallly urgent, so could you please give me some suggestions about it? Thanks a million!!
Xiaofei

Thank you for your suggestion!
sorry but that this method won't help because my code is sort of difficult to put into a for loop .
the logic is like this: first the output is set to 0 for a user-defined amount of time (means no excitation). secondly it gets excitation and gets output but no data saving is allowed for a user-defined amount of time. at the same time, one paramater is automatically changed. (the reason for not saving data is that there is a transient response when the parameter changes). thirdly, data saving begins with the same
parameters as before, also for a user-defined amount of time. and then after these three steps one iteration is done. for iterations there is a different parameter, the user defines the range of the parameter and the number of different values in between and the code will do the increment at equal intervals automatically. my problem now is that i don't know how to correctly control the time. i have tried various ways but no one works.
the second problem is that i don't know how to let it run and not saving data and then saving data without changing everything else. what i have now is to call the same VI twice, once for only running and no data saving and the other for saving data. but then the problem is that in between these two routines, the output suddenly becomes zero and gets excited again after i call it. My professor said that i cannot let the output become zero, otherwise there is no meaning in waiting for the excitation to become stablee. but then i don't know how to call a VI only once and let it do the saving for only the latter part of the running time. i have been working on this thing for two weeks now and still have no idea....Sorry the problem is long and tedious, but if anyone have any idea about it, please let me know, i will be most grateful. Thanks a million!!!

Time machine makes 30 backups for the last two days, no backups for any earlier times: is there a way to control it?

I've been running Time Machine in the background for as long as I've owned my current Mac--- a few months. It is a completely generic set-up: it's a desktop (rarely shut off or asleep) connected to an external hard drive that is much larger (1 TB) than my internal hard drive (0.5 TB), and Time Machine is configured to save backups of my whole internal drive to the external drive. The external is half-full, and the internal is a little more than half-full. I often hear my external crunching away, working on something.
I recently needed to access an old file, so I went into Time Machine mode on the folder where it had been deleted a few weeks ago. While I'm not upset that it isn't available (it's my own fault for deleting it), I didn't expect the Time Machine to have such a bad distribution of saved backups. There are 30 backup snapshots of the past two days, and nothing earlier. I was expecting something more like a few from today, a few from this week, a few from this month, and a few going all the way back in time--- a broader distribution.
I don't see any way to control this in the Time Machine Preferences (in fact, very little control at all). Is there a secret way to control it, or some tip to ensure a more useful distribution of saved snapshots?
Thanks,
-- Jim

Thanks, but it doesn't exactly address my question. TimeMachineEditor allows me to set the intervals or times when backups occur, but it doesn't control the algorithm that decides which snapshots should be deleted. My problem was that Time Machine chose to delete all of the old snapshots and keep only the most recent ones: I'd like it to keep more of the recent ones than the old ones, but still keep some old ones.
In fact, the (unmodifyable) text on the Time Machine control panel says that it keeps:
hourly backups for the past 24 hours
daily backups for the past month
weekly backups for all previous months
That would be perfect if it were true.
Perhaps the algorithm did the wrong thing because the size of my internal hard drive varied quite a lot a few days ago: a process got out of control and used up all of my internal disk space. I killed the process and deleted its output (several times), so my internal disk eventually went back down to normal. Perhaps in the intervening hours, Time Machine made a backup, once an hour, and used up all of the external drive space. When it had to choose between keeping "weekly backups of previous months" and "hourly backups of the past 24 hours", it chose to keep hourly backups of the past 24 hours. This was the wrong choice in my case (it was the unwanted output) and is probably the wrong choice in most cases.
Is there a way to control the algorithm that decides which backups to keep and which to delete? I would have it delete the hourly, daily, and weekly backups in a way that preserves their relative distribution.
By the way, while I have made it sound like my problem was a runaway log file (something that would be easy to put in an excluded directory with Time Machine's "Options" button), it was a VirtualBox snapshot merge. The data in question are precious, but were unnecessarily copied many times while VirtualBox failed to merge them properly. I can't simply exclude a directory: I'm talking about a more general problem.
Thanks!
-- Jim

Oracle instance running on a system with low open file descriptor

Hello.
We have 10.1.0.4 on SuSE 9 on x86 64bit Sun servers.
We have databases that if started manually come up without the warning, but if started via a shell script scheduled through a crontab start up with this warning: "Oracle instance running on a system with low open file descriptor".
My understanding is that it has to do with OS ulimit. it appears that non-interactive shell (crontab) does not set the nofiles at 65536.
All our system are set up exactly the same way. The problem is, though, that some systems do not report the warning even when started non-interactively.
My question is this: assuming my nofiles ulimit is in fact too low on all systems, why would some systems report the warning and others would not? Is there anything database specific the instance looks for when it starts, such as the number of datafiles in the database, instance memory size, etc..., which would make the instance warn in some cases but not the others?
Thank You
Boris

Thank You Satish.
This is a good reference and we may end up looking into the patch bundle associated with the bug.
But does anyone have any idea why the systems that are set up the same exact way would warn on systems and not on others?
Also, the Metalink note talks about init.crsd. I have not build an association between this inconsistency and RAC.
What I do see is that if we start up our database non-interactively (where ulimit -n resolves to 1024, instead of 65536) the warning is generated, in some cases.
Perhaps, the 1024 is too low. But then my question is why would Oracle think it is too low only on some servers and not all?
Boris

Auto Update X Control Instances

My LV version is 8.6.1 Developer
Are there any XControl experts out there? Every time you make changes to the Xcontrol GUI but previously had utilized that XControl instances in 100 different VIs, is there a way to automatically force LV to update all those 100 VIs along with its GUI dimension? Right now, I have to manually open all those 100 files then delete the old instances, drag and drop to create a new instance ....this is really annoying!

mishkin wrote:
I don't think you need an XControl expert on this one. As far as replications, XControls should behave just like every other control. If you want to make a change to the control and have it be replicated to previous instances, make a typedef or a strict typedef out of it. Otherwise, you'll have to go back and edit old instances of your controls manually...
No, I don't think we're on the same page here buddy. You're thinking of the normal standard control but my question was xcontrol specific. With a normal control with strict type def enabled, all your future instances will reflect all the changes. Xcontrol doesn't have it. What it does have, however, is when moving from xcontrol child data to child facade file using strict type def. That's the best you will get out of using strict type def. However, once you created an instance of that xcontrol, it becomes finalized. If you try to right click on the new xcontrol instance, try to locate the feature "disconnect from type def" ...you won't see it. It doesn't exist. Whereas with a normal control instance, you will see it.
Another interesing point too even when using a normal control, after you created a new instance but accidentally disconnect it from type def, good luck. There is no way to reconnect them. I thought NI should look into fixing all these quirky issues especially with all the other issues associating with xcontrol.

Is there any way to control automator through voice commands?

is there any way to control automator through voice commands?
Im simply trying to program my macbook pro early 2011 8gigs ram to resound to voice commands using automator but I haven't found any discuss on the subject.

I have some AppleScript that expects a Pages (v5.2.2) document opened. It will then then speak the document name, and the count of words in the document. Or, I can trigger Speakable items and tell it to, "Switch to Pages" which it does immediately, because this is part of its repertoire of built-in commands. Then speak Word Count?
In Automator, I created an Application, in which I dragged/dropped the Library > Utilities > Run AppleScript action into the workflow window. I replaced the AppleScript boilerplate with my existing AppleScript code that speaks the word count, and saved the Application into <login dir>/Library/Speech/Speakable Items folder as Word Count? (without the .app extension). It can also be saved in the Application Speakable Items > Pages sub-folder under the general Speakable Items folder.
Next, I turned on Speakable Items in System Preferences > Accessibility > Speakable Items.
It took several tries to get a spoken result from the Automator application, but it did work. Even with a calibrated microphone, and speaking about 18 inches from it. About 2 successes for ten tries. If I just put the AppleScript (without extension) in the same folder, my success rate would improve to 5/10. You may grow very weary of the repetition necessary to get Speakable Items to work. A small pink text banner also appears with the spoken content in it — below the Speakable Items monitor on the screen.
Automator is scriptable. This means that in AppleScript, you can dynamically build an Automator workflow, and then execute it.

There is no clutser control instance running on host

Similar Messages

Maybe you are looking for