There's a problem about wps.

when i run wps-office in terminal,it shows that
/opt/kingsoft/wps-office/office6/wps: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory
by the way ,my arch is 64bit andwps only run in 32bit environment,
thanks a lot.

junningliu wrote:
yes ,i tried it once
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: gcc: requires gcc-libs=4.8.0-4
Yes, I think you also need to install "lib32-gcc".
"lib32-gcc" and "lib32-gcc-libs" can replace "gcc" and "gcc-libs" without a problem.

Similar Messages

Help me , there is a problem about xcontrol's property and method vi!

Hi everyone,
we know xcontrol's property or method is a vi actually when we create them.
we are also sure there are two ways(static and dynamic way) for invoking a vi at least.
So when we evaluate xcontrol by property node or execute method through method node, does labview dynamically invoke the property or method vi ? if labview dynamically invokes them,does owner vi wait them done or not?

What you could do is create a pumping scheme, that pumps the data into the Facade VI and handle the number crunching there, however that would block the execution of events in the facade VI.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

There is some problems about the connection betwee...

hi, my cell phone is N70, my notebook is ThinkPad T43 with Bluetooth set,and my nokia pc suit is 6.86.9.3
And I wanna connect my N70 to the T43 through the bluetooth. But after I enter the password in my phone which matches the one in my notebook a dialog window written " Can't authorize the phone." appeares. I do not know the reason why. So I ask for the help here.
Thanks in advance for any help...

In detail, when the pairing used nokia PC suit instigated a dialog window written "can't authorize the phone" appeares on my PC screen. But when I use the IBM bluetooth software installed formly the pairing success. And files can be transferred, but I can not backup my contacts and mails.
I don't know.
Help
Thanks in advance.

Problem about space management of archived log files

Dear friends,
I have a problem about space management of archived log files.
my database is Oracle 10g release 1 running in archivelog mode. I use OEM(web based) to config all the backup and recovery settings.
I config "Flash Recovery Area" to do backup and recovery automatically. my daily backup schedule is every night at 2:00am. and my backup setting is "disk settings"--"compressed backup set". the following is the RMAN script:
Daily Script:
run {
allocate channel oem_disk_backup device type disk;
recover copy of database with tag 'ORA$OEM_LEVEL_0';
backup incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA$OEM_LEVEL_0' database;
the retention policy is the second choice, that is "Retain backups that are necessary for a recovery to any time within the specified number of days (point-in-time recovery)". the recovery window is 1 day.
I assign enough space for flash recovery area. my database size is about 2G. I assign 20G as flash recovery area.
now here is the problem, through oracle online manual, it said oracle can manage the flash recovery area automatically, that is, when the space is full, it can delete the obsolete archived log files. but in fact, it never works! whenever the space is full, the database will hang up! besides, the status of archived log files is very strange, for example, it can change "obsolete" stauts from "yes" to "no", and then from "no" to "yes". I really have no idea about this! even though I know oracle usually keep archived files for some longer days than retention policy, but I really don't know why the obsolete status can change automatically. although I can write a schedule job to delete obsolete archived files every day, but I just want to know the reason. my goal is to backup all the files on disk and let oracle automatically manage them.
also, there is another problem about archive mode. I have two oracle 10g databases(release one), the size of db1 is more than 20G, the size of db2 is about 2G. both of them have the same backup and recovery policy, except I assign more flash recovery area for db1. both of them are on archive mode. both of nearly nobody access except for the schedule backup job and sometime I will admin through oem. the strange thing is that the number of archived log files of smaller database, db2, are much bigger than ones of bigger database. also the same situation for the size of the flashback logs for point-in-time recovery. (I enable flashback logging for fast database point-in-time recovery, the flashback retention time is 24 hours.) I found the memory utility of smaller database is higher than bigger database. nearly all the time the smaller database's memory utility keeps more than 99%. while the bigger one's memory utility keeps about 97%. (I enable "Automatic Shared Memory Management" on both databases.) but both database's cup and queue are very low. I'm nearly sure no one hack the databases. so I really have no idea why the same backup and recovery policy will result so different result, especially the smaller one produces more redo logs than bigger one. does there anyone happen to know the reason or how should I do to check the reason?
by the way, I found web based OEM can't reflect the correct database status when the database shutdown abnormally. for example, if the database hang up because of out of flash recovery area, after I assign more flash recovery area space and then restart the database, the OEM usually can't reflect the correct database status. I must restart OEM manually to correctly reflect the current database status. does there anyone know in what situation I should restart OEM to reflect the correct database status?
sorry for the long message, I just want to describe in details to easy diagnosis.
any hint will be greatly appreciated!
Sammy

thank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
thanks again.

Problem about Cups!

Hey AF.
I just got a Keycera FS3800 Laser printer - And want to setup this for networking printing!
I have my server where I have installed Cups and edited along the wikiguide to cups.
But each time I want to print a testpage - it stops the printer.
I have installed the following packages:
cups - ghostscript - foomatic-filters and downloaded the ppd and copied into models. BUT nothing makes me able to print to the printer (Using network) - so that I able to set this printer up for anybody in my house no matter OS ??
Or know if this is a special driver or anything else ???
Have anybody any ideas or can help me getting further?

peque wrote:
Of course.
The printer is connected using rj45 and nothing else.
My network is made with a LAN zone(where the printer is) with a IPTABLES firewall to the outside.
I have swith 24ports connected to the firewall and thats where allo PC´s are connected to unless they are using the wireless - buit still they are connected using this switch.
I have 1 PC (laptop) connected directly to the printer - works just fine.
But I would´like to use a cups-server, for alle PC in the house. So no matter what they have to go via the cups-server.
I have copying the ppd file that I got to work on the laptop - and using the exactly same settings about the printer. But when I try to print a test page - THe cups server returns with the printer stopped. After from what I can see - there´s no problem about the network - I can ping, telnet and everything else - But the only problem is that the machine I want to use as cups server will not print with the printer.
The laptop prints just fine (I used the kde guide to install the printer on this - and another laptop wioth windows also prints fine directly on the port)
Hoefully this was some more info - Or write me which details you want!
Sorry, beyond my skill level. I print to a network printer which is attached to a router with a standard ethernet cable. The printer is just a device on the network. The router is the "firewall" to the outside world and the gateway to the Internet for the PCs on the network.
Good luck, jimbo

HT1414 It has some problem about my iphone. When I turn off the phone and then turn on, it shows the screen of apple page and then show the loading page many times. What happen with my iphone?

I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?

Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore

Im trying to do itunes match i get to the third part which it says gathering artwork and songs and about half way through it stops and says ther is a problem sign out and sign in again which i do and still it happens getting really frustrated please help

Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.

Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.

I can get the signed to Hotmail but I can not read my mail. Sorry, there's a problem with Hotmail right now Hotmail wasn't able to complete this request. Microsoft may contact you about any issues you report.

about 10 days ago started having trouble with Hotmail. Could isgn in but keep getting the following message.
Sorry, there's a problem with Hotmail right now
Hotmail wasn't able to complete this request. Microsoft may contact you about any issues you report.
I can send mail and review my contacts but that is it.
I then tried getting in with Internet Explorer and it works fine. I do not like IE because I have problems with some websites.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

I recently got IOS 8 and I like it but there is one problem on my camera roll it says i have 600 photos but i went into setting general and about and it says i have 2,743 photos my photos keep on duplicating how do i get this to stop.

i recently got IOS 8 and I like it but there is one problem on my camera roll it says i have 600 photos but i went into setting general and about and it says i have 2,743 photos my photos keep on duplicating how do i get this to stop. i have a iPhone 5c

Hi Bpaitin,
Go to Settings>General>Usage, and under iCloud, click on Manage Storage>click on your device, then under Backup Options, turn Photo Library off and then back on. See if that clears it up.
If it does not, reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the issue is resolved.
Cheers,
GB

Is there any problem about 10I oracle connect to 9I oracle in BW

we want to know about
creating a new source system on BW in AIX pointing to an Oracle
database, bw oracle use 10i database , connect to
9idatabase(Windows) to get data for BW,
can you tell me how 10I oracle connect to 9I oracle ??
is there any problem about 10I oracle connect to 9I oracle ??If
there exit problem ,how to deal with it ??
Thank you
ALLEN ZHOU

Hi
You may face some problem in BASIS side especially if one version is Open SQL and other in Old SQL
Regards
N Ganesh

What is this about: "There was a problem connecting to Facebook."

What is this about: "There was a problem connecting to Facebook. The operation couldn't be completed. OSStatus Error -1) and then I have to hit "Okay" sometimes over 100 times or just force quit Aperture. Happened again this morning and I had to hit "Okay" 55 times.

Hey Rob,
Thanks for the quick post! I checked the Login Items and it looked like there were three applications checked off that had uknown types next to their names. I unchecked them and hope to see this fix the pop up box.
I'll respond if this does or does not fix the pop up.
Thanks!

I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?

I just heard a news report that there is a problem with malware in mac computers that came through a recent java update. Is this true? If so, what should be done about it?

As usual those "news" reports mangled the facts and got most of the story completely wrong. This particular attack did not arise through a Java update, it was distributed through a fraudulent Flash download popup window, or malicious websites that Safari is designed to block.
If you run Java on your Mac you may be vulnerable to this malware. If you do not run Java there is no risk. If you routinely keep your Mac up to date with Software Update the risk is greatly reduced.
Shut off the mass market junk that masquerades as "news" and read this to learn some real facts:
https://discussions.apple.com/docs/DOC-3271

Lync 2013 I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second Anybody out there having similar problems with call pickup Groups?

HI
I have a strange problem concerning group call pickup in lync 2013.the pickup calls on snom 710 having only a second delay, but in lync client it having about 5-7 second
Anybody out there having similar problems with call pickup Groups?

Hi,
Did you meet any other call delay when you using Lync?
As the issue happen for Lync desktop client, it can be performance issue. Please check if there is any error message from FE Server when the issue happen.
Also please check if you have updated Lync Server to the latest version, if not, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Is there any option like about:onfig to solve color management problems in Android-Firefox ?

The most eyes and brains of us all demand real colors.
People that works as artists, retailers, developers and so on, wish to present their product or content online on small devices that run with Android and similar.
People that serach products and content will still see false colors on their devices not by the lack of color space in the displays but by the lack of the colorspace-transfere.
Firefox for Desktop now works well but what about Android.
Is there a tweak like about:config?
Many onlineshops art-selling websites and photostocks now invite people to use mobile devices without nowing the problem.
Please clarify.

Using 16 bit color is a large performance win. We do this on devices with less than 700 MB of RAM. Modern Android devices should be using 24 bit color.
What device are you experiencing the issue on?

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem?

Since I downloaded the newest update, my phone only rings or makes text sounds about 10% of the time. It can be sitting in front of me and a call or text comes in. No sound, just a msg on the screen. Anyone out there having that problem? It's not a problem in the settings as I set the rings and tones I want. The rare one comes thru with sound. I never had any problems before update.

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

There's a problem about wps.

Similar Messages

Maybe you are looking for