There was no sound after i record a video, it is not on a silent mode.what's wrong?, There was no sound after i record a video, it is not on a silent mode.what's wrong?
when i record a video and play it after, there was no sound...but i try voice memos and it has sound...can u tell me what's wrong?=(
I have tried turning up the volume and it still doesnt work, I think I have tried everything possible and still no good!
Similar Messages
-
I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.
yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.
-
I recorded a video when my phone was on silent mode. There is no sound on the video when I play it. Is there any way I can get the sound on the video?? Please help!
I have tried turning up the volume and it still doesnt work, I think I have tried everything possible and still no good!
-
I have a MacBook pro that I bought in 2012, I have had problems with it randomly restarting almost since it was new. I called tech support several times and they did tests each time and thought they had it fixed but later it started again. Some times it will go a month and not do it but lately it has been doing it more frequently some times several times a day. Day before yesterday I took it to the apple store and left it. today they called and said they could find nothing wrong with it. But they said they could see where it had restarted 60 times. Does anyone have any suggestions.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Phone was not updated on time so it automatically shuts off and you get a plain black screen until it is recovered and updated. Well when i did the update and recovery I received an error. I went through the steps to fix the error, I had to restart my computer and now the phone isnt recognized on my computer or in itunes. The screen is still completely black so pushing the home button and plugging in to computer still does nothing. Device manager shows nothing in usb port, and apple mobile device software is installed and running. Any help?
Hello agardner37701,
I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode. I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
What is wrong with the edit biling info screen. it cannot verify my address. i triple check my address info
and it is correct.Use the email form > Apple - Support - iTunes Store - Contact Us
-
No sound after recording MIDI using cycle mode take folder
I'm going through the Apple Certified training book "Logic Pro 9 and Logic Express 9". My project and global settings are pretty close to what comes with Logic when you install them. I.e. I haven't been messing with any settings not explicitly described in the book.
I'm at the chapter on MIDI recording, and am learning about MIDI cycle recording to a take folder. (I've already done this successfully for audio.) But, Logic does not seem to be behaving the way the book describes. I have recorded 3 takes. I see a MIDI take folder region after I've recorded, and I can double-click or click the arrow on the top left to reveal the 3 takes. All 3 take regions are white - as though none are selected. The region in the actual track (the take folder) above all three takes is green. When I try to play, in any combination (ie, Soloed, not soloed, other tracks all muted, no tracks muted) I cannot hear the MIDI take. I tried selecting the three different takes, both by clicking on them, and choosing from the drop down menu on the top-right of the take folder. I see the notes in the take folder display (the one that is green) changing when I select a different take, but the takes themselves always stay white. Although, the region header for the take becomes darker, as though the region is being selected, but the region is not green.
Is there something I'm missing here? Why can't I hear anything from these takes? I can open up each take in the Piano Roll editor, and click on the keyboard keys to hear notes, as well as clicking on the notes themselves and hear those. But when playing, I get no sound.
I tried "flattening" this take folder. It creates 3 new tracks below the current track. All regions are again white, and clicking on them does not make them turn green. I can play, and I hear all three takes playing at the same time. If I try to mute one of the tracks, ALL three tracks become muted, as though the mute button has been grouped to all these tracks. But I looked at the mixer and do not see any other channels have been created, not even for these new tracks. And they have not been assigned to a group either.
I'm not sure if I'm doing something wrong, or if this is a known bug?
RobRob Ross wrote:
I tried this again on the same track, a few bars away. It worked this time. I've tried it 3 times now, and each time worked as expected. So I'm thinking this is a bug in Logic that caused the problems the first time?
The "white" takes are muted >>regions<<, not tracks.
You should be able to unmute (demute?) then using the "mute" tool.
And... I believe you are correct, this is a bug in Logic that's been around for a while.
pancenter- -
Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Is there a way to see what font was used originally, after the type has been converted to outlines?
Hi all, I would really like to know if there is any way to find out what font was used originally in an Illustrator document, after the type has been converted to outlines? The reason for this is I need to update some wording in a couple of old logos I had made and I have NO idea what font I had used...for the life of me I just cannot remember. Because this was so urgent for one of my projects I had to do a search online via "WhatTheFont" to see what font it could be (which I then didn't seem to have in my library!), and repurchase it. I am 99% sure I HAVE the font - or something VERY close - but under a different name.
Normally I keep a much better record of fonts used but there have been times occasionally in the past when I have done something in a hurry and changed the type to outlines without keeping the original, or keeping detailed notes at least. The fact that I did NOT keep notes on a few projects I have done in the past has made me want to kick myself because now I need to revisit one of those again..grrr:)
Can anyone offer any advice? I appreciate your help as always:)
best,
ChristineChristine,
You can also ask in the Typography forum,
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
The guy running whatfontis is a regular poster there.
And apart from
http://www.whatfontis.com/
there are
http://www.identifont.com/
http://new.myfonts.com/WhatTheFont/
and especially for script,
http://www.bowfinprintworks.com/ScriptIDGuide.html -
hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again. -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering. -
after updating 4.3.1 to 4.3.3 my i phone 4's wifi is not working 2 to 3 hrs of it ,but 3 hrs i was downloding free soft 4m itunes.............so what wrong with my phone
Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users. -
pretty much what the title said
I went to Update my I phone (4) and It was updating then said it could not finish the update left my phone on the black apple after 40 mins went to recovery mode .. it said restore it but everytime I try it said error 18 what can i do?Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mode with 8 bit RYB. I controlled my result with Irfan View: it´s a picture with 16,7 million colours and 56 bit pp.
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you. -
Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.
Maybe you are looking for
-
I have an iMac 2013 running OSX 10.9.4. I want to use Carbon Copy Cloner to backup user files to an external hard drive to free up space on my iMack Hard drive. So, say I make the backup today, delete iphoto libraries from my iMac, and then backup my
-
Photoshop & AfterEffects CC (2014) Refuse to Update
Hi all, I'm encountering a strange issue with my account...a few days ago an update appeared in CC for Photoshop and AfterEffects. When I attempted to update as usual from the Creative Cloud app, the updates both failed, citing an error code U43M1D20
-
"save as .pdf" suddenly not working
- that is, everything was fine yesterday and then this morning it isn't: selecting File > Save as .pdf gets me a second or so of "busy" cursor and then nothing. No Distiller opening up in the tray, and no output .pdf fwiw, Print to .pdf worked fine.
-
When using counter 0 output, counter 1 goes to high state
I'm using a PCI-6229 DAQ card with LabView 7.1. Running the pulse generation example VI called "Gen Dig Pulse Train-Finite.vi" (located in the Counter\Generate Pulse library), I noticed the following anomaly. If you select dev1/ctr0 as the specifed
-
Want to pass 2D integer array from VB 6.0 to LabView (v 8.0) DLL
I was able to pass 1D arrays from VB 6.0 to LabView 8.0 with no problem. I checked the literature for help regarding 2D arrays and found scant help unless it was for VB.NET, C or single dimensional arrays. Thanks. I wrote a simple test VB program t