Thinking of CPU Upgrade

Hi folks
I'm thinking of upgrading my system, maybe with a CPU Upgrade to start.  I was wondering how fast a processor it would support and whether it would make a notable difference.
MSI-6382
VIA VT8366A Apollo KT266A
AMD Athlon XP, 1466 Mhz (5.5 x 267) 1700+
512 MB (DDR SDRAM)
NVIDIA GEForce2 64 MB
ST380020A (80 GB, 5400 RPM, Ultra-ATA/100)
I'd appreciate any advice.
Let me know if you require any more information.
Thanks Dave

Thanks guys.
I've posted elsewhere but I've fitted a 2400+ processor and seems to be working fine, other than BIOS doesn't recognise it.  I'll probably add another 512MB RAM and see how I get on.
Cheers Dave
MSI-6382
VIA VT8366A Apollo KT266A
AMD Athlon XP, 2000 Mhz (7.5 x 267) 2400+
512 MB (DDR SDRAM)
NVIDIA GEForce2 64 MB
ST380020A (80 GB, 5400 RPM, Ultra-ATA/100)

Similar Messages

  • MSI GX623 CPU upgrade experience anyone?

    Hi, guys!
    I have GX623 with Intel P7350 CPU. I'm thinking about CPU upgrade...
    Does anyone have tried to upgrade to CPU to T.... series, X..... series or even Q.... ? If yes, how laptop handles temperature? Because of bigger TDP it increases quite a lot? Cooling can handle It when running games and stressing GPU? How about support? Which bios is required? Maybe something else?
    And I want to share some experience with you as well, as I'm using this laptop for year or so. I have HD4670m GPU. If your not playing games all the time (And I'm not), try switching to power saving mode for GPU in both plug-ed and unplug-ed scenarios in ATI Catalyst comand center. Since then my laptop, is a lot more quiet and cooler (therefore saving power) when multitasking at home or watching youtube etc... When gaming just push Eco button in gaming mode and - bang full GPU stress in no-time. OK, bit offpic but I was too lazy to create new one.
    Leez

    I have just performed an upgrade to a Q9000
    on a MSi GX623, so here ya go
    Proof! IT WORKS!!! and im super excited!!!
    http://users.telenet.be/neo.4all.cc/gx623/Load.png
    http://users.telenet.be/neo.4all.cc/gx623/idle.png
    http://users.telenet.be/neo.4all.cc/gx623/Windows_Performance_Index.png
    ps, even the turbo button works;) 10Mhz extra FSB translated to ~150Mhz OC

  • Is CPU upgrade on Satellite 2410-303 possible?

    My Satellite 2410-303 has Pentium 4 Mobile 1.7GHZ processor. I want to upgrade its processor to Pentium 4 Mobile 2.8GHZ. I think that it is possible because its upper models have faster processor and that is unique difference between them.
    Please, help me for this question and tell me is it possible?

    Hello
    You will be very lucky if someone has so good experiences with CPU upgrade on Satellite 2410 but on this forum you can find very nice comments about that. I have founded just two of them but very interesting. Check it out!
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87488
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=59708
    Bye

  • Satellite M40x will not boot up after CPU upgrade test

    I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
    Anyone have any ideas on what is causing this??

    Im not surprised.
    As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
    Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
    The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
    Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
    So possibly this is a reason for the no booting.
    I think more details you will get from the service guys in your country

  • CPU upgrades

    I'd like to upgrade a tray-loading iMac with the CPU from one of the faster slot-loading ones - 350, 400, whichever.
    I'd also like to swap a 450 or 500 MHz CPU from a DV SE that had firewire into the earlier, ordinary slot-loading version, which didn't.
    Does anyone know if there's any reason there would be a problem doing either of these changes?
    For that matter, if the DV motherboard's okay, any reason I couldn't use the whole thing in the slot-loader? I think there's a video problem, but if that's just a monitor thing and not on the board, it shouldn't be an issue.
    Thanks

    you are correct, the slot loaders do not have a separate CPU card, its soldered directly to the logic board.
    There are CPU upgrades available for tray loaders (don't know if any are actually still produced anymore, but they do exist), but the cost usually just isn't worth it. You could get a used slot loader for the same amount,a nd a used eMac or mac mini for a little bit more.

  • Dv6-1216sa cpu upgrades?

    running win 7 32bit, (although will be upgradeing to 64bit soon)
    bios up to date F:18
    current cpu: AMD Turion X2 RM-74 2.2GHz
    currently my ram is 4gb, which i can only use 3 of hence the upgrade to the 64 bit os soon
    i will be upgradeing to 8gb ram,
    just wondering what are my cpu upgrade options? would rather get the most out of this laptop, cant afford to buy a new one, willing to put about €100 into this

    Hi:
    I am not an expert on AMD processors.
    If you think the ZM isn't a whole lot better (you need to look at the specs more than just the speed), then I wouldn't do it.
    The speed isn't a whole lot different and the L2 cache is the same.
    Normally the faster processors will run hotter when all else is equal (voltage, etc).
    Upgrading the memory is the cheapest, easiest route to a better performing PC.
    And definitely keep the vents and fan clean of lint and dust as much as possible.
    Paul

  • Re: Portege M400 cpu upgrade?

    Hi,
    I am looking to upgrade my portege m400-ez5031 with the fastest cpu it can handle,
    now it is centrino duo T5600 1,83ghz.
    I think the best is T7600 is it possible?

    Well, usually the CPU upgrade is not very easy
    Its not possible to say if you notebook would run stable or properly after CPU replacement.
    Fact is that BIOS is not tested and not configured for other CPUs and this can cause some compatibility issues which would affect the notebook functionality!
    Main issue might be the higher heat dissipation caused by stronger CPU this would lead to an higher temperature and to overheating
    So be careful and in my opinion the CPU upgrade is not worth since you would not notice a performance boost.

  • Dell Precision T7500 E5645 CPU Upgrade?

    Sid Phiilips wrote:
    I think I'd do the SSD and the RAM first and see how it goes.  What is he running for a graphics card?
    Thanks for the quickly reply, we recently installed a NVIDIA Quadro K4200.

    We have a Dell Precision T7500 with 2 x Intel Xeon E5645 2.40GHz
    The computer is being used for CAD work and rendering, the user complains the computer is slow which it is compared to the rest of the computers in our studio.  I've been told I can't replace it yet but can upgrade it.
    I was wondering what would be the best CPU upgrade to do for CAD work?  
    Have run CPUID and can see it has Socket 1366 LGA, I'm unsure sure if I should be looking at an E or X series processor though.
    Other upgrades I'm planning to do to the computer.
    Have set aside a Samsung 850 Pro SSD we have spare to rebuild the OS onto.  
    Going to remove mismatched RAM modules and install 2 x Crucial 16GB DDR3 PC3-12800 Registered ECC 1.35V 2048Meg x 72
    This topic first appeared in the Spiceworks Community

  • CPU Upgrade Advice - Opty165 or wait?

    Considering AMD is phasing out 939 systems, I'm thinking about an upgrade to a dual core, possibly faster CPU.
    I'm not willing to burn too much cash on a dead platform, and AMD solutions seem to me a little overpriced after Conroe has been released.
    If I was going to upgrade now, I'd probably go for the Opteron 165, which is cheap and every reviewer out there swears it reaches 2.5 GHz easily.
    On the other hand, 2.5 GHz is pretty much the same speed I attained on my single core... I'd like to go towards 2.7 - 2.8 and feel a noticeable improvement.
    Should I buy the Opteron or just wait for prices to drop lower, and maybe buy a FX-60 later?

    Quote from: aicjofs on 06-January-07, 12:33:34
    Supposedly the best stepping out there right now.  Excellent!
    great  I really hope it lives up to the expectations 
    Quote from: aicjofs on 06-January-07, 12:33:34
    I don't think there is a bad choice for BIOS and I have used them all.  I'm using 5.0B currently and 3.A/1.A is just fine also, no reason for 3.8 unless you have a RAID and an extra single drive(even then there is a workaround).  Are you using my 5.0B modded or someone elses?
    I'm still running the Winchester with 3.2, ATM. The Opty is waiting for me on my desk right now  :D
    Currently I don't have any other PATA drives; sad to hear it hasn't been fixed in 3.A, though. Back in december I've scrapbookked your modded bios thread, and that's where 3.A and 3.8 come from.
    I can't seem to remember where I found 5.0B modded, but I think it could be yours, too.
    The MD5 checksum for the BIOS file itself is a1ca7a1435a4776f9bbd0b3d2f3ae5b5, while the archive sums to 5b836f7744b991e433f7b53579a1dd76.
    UPDATE:
    I finally found the time to play with BIOS flashing, and tested 5.0B and 3.A. I have some questions, though:
    1) 5.0B sports higher voltages for RAM, however I seem to remember that my board (bought in February 2005) needs a hardware mod to support voltages up to 3.1V. Am I correct in assuming those options don't really do anything ?
    2) There's a "missing" memory divider right above 166: it has no text, but can be selected nonetheless. Is it 150, and is it working properly?
    3) Is there an option to disable floppy seek in 3.A and 5.0B?

  • Cpu upgrade question ... again !

    OK, I've done more research on the motherboard this system has got, and it turns out that it is an OXNARD ( gateway 2000 ) motherboard ..... looks exactly like the msi 6330-lite motherboard .... so I am assuming its a 6330 lite motherboard.
    The gateway website shows the motherboard as capable of taking up to a athlon 1.3 Mhz cpu, although I am simply looking at upgrading to a 1.2 athlon cpu ( 100 mhz variety )
    also, I have noted the bios that is installed on my machine here is the 0AAVWP02 version that gateway provided .... I am still wondering a couple things :
    1 - can i simply get an athlon 1.2 Mhz cpu and ( as i have been told in an earlier post ) clear the cmos to upgrade my machine ? Also, how exactly do i clear the cmos on this board ? Or will I have to upgrade the bios, which I am very unsure of how to do on this particular motherboard ... making me very nervous here ...
    2 - if I DO have to upgrade the bios on this motherboard, what version of the gateway bios do i need , and how, exactly, do i do it ? I am not the most savvy pc user, have upgraded bios a few times before on other machines, and done a couple cpu upgrades too, but anyone got any suggestions for a semi-newb on this upgrade ?
    thanks, warren

    Ok..
    i really dont think that u should assume that the two mainboard are identical just because they look the same..
    Upgrading... Well... Its different from MB to MB... On MSI, all u have to do is plug the CPU and the MB configures it self.. (ALl u have to do is set the FSB).. But on other manifactires, u might have to set up the clock speed ratio and the core voltages manualy using jumpers.. U need the MB maunal to do this..
    clearing CMOS.. I dont c why u need to do this.. But if u really want to then there should be a small jumper of three pins with a cap in the first two pins. Pul it out and plug in into the next two pins and again plug it into the first two pins.. (DONT DO THIS WITH THE COMPUTER ON).. If this doesnt work then pull the battary out, wait for a few min ans put it back in

  • G500 Supported CPU Upgrade?

    My question is simple and I want an answer from the Lenovo Hardware experts themselves;
    I want to upgrade to either of the two CPUs below
    Intel Core i7-3632QM HM76 chipset and TDP of 35W
    or
    Intel Core i7-3840QM HM76 chipset and TDP of 45W + http://www.poweradapterlaptop.com/Lenovo/ADL135NLC3A.htm#
    Lenovo ADL135NLC3A 135W AC adapter
    Currently the BIOS for Lenovo G500 is at V2.03,
    The Lenovo W530 has this BIOS also which has an i7 3840QM so I presume I can upgrade to the i7 3840QM plus a 135W Adapter? correct me if I am wrong please I need a LENOVO tech hardware expert to answer please.

    I dont have this system, I did visit the computer depo a while ago, and did find out regarding the mPCIE, the BIOS will readily accept the SSD, but at the risk of you losing wireless connectivity, which can be restored via USB wireless adapter. I dont fear BIOS not recognizing the cpu, I fear motherboard fry, hence I wont recommend CPU upgrade. 
    Yes Upgrading the CPU under warranty period will void you warranty, because the CPU is an FRU (factory replacable unit).  Regarding the Drive caddy I was thinking of a generic drive caddy, you can purchase one from ebay or amazon. The i5-3230M is still a very powerful mobile CPU. The biggest bottle neck in your system is the HDD, as first off the files are loaded from the HDD then cached to the RAM hence I recommended you install a generic drive caddy and put in your HDD there, and install an SSD. 8GB ram is the sweet spot, but if your keeping atleast 3 years in mind then 16gig will keep you satisfied for a long time. I DO NOT recomment CPU upgrade
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!

  • OS X Tiger and CPU Upgrades

    I have a 400 MHz G4. I primarily use it for FCP 2 and music but have been having problems seeing my Que Fire firewire cdrw. I have thought about a CPU upgrade and want to add a DVD+-RW to copy projects out to DVD's instead of tapes. With the trouble of having to hack a driver in 9.2 to get a DVD unit to work - would it be easier to upgrade to OS X Tiger to get around the DVD issues and get new features but am I only going to have more issues because of the upgraded CPU. The Apple specs say OS X is not compatible with upgrades but the manufacturers of the cpu upgrades say they are. Several of the new OS X DVD units I've looked at require at least 500MHz. (I posted earlier on the OS 9 forum - my old cdrw works on a new FW equipped laptop with Tiger.) I'm trying to get some more life out of my old G4 because I can't afford to buy a new G5. Any suggestions???? Thanks

    You will triple the stated clock speed, but in no way
    will the machine run 3 times as fast. You'll be lucky
    to notice much change at all.
    Yes you're right, in real world terms the machine won't be 3 times as fast, as you're still stuck with the same 100MHz system bus and memory etc, but I think that saying you'll be lucky to notice much change at all is a little unfair.
    I recently upgraded the processor in one of my Macs and the difference was very noticeable, from reduced boot/rendering/encoding times to greater all round responsiveness.
    If you're moving from OS 9 to OS X and you don't upgrade the processor, I expect OS X will feel pretty sluggish in comparison, although like you say more RAM will help.

  • K8N Neo2 Platinum - Best CPU upgrade for under £200 please?

    Hi there,
    I currently have an AMD Athlon 64 3500+ 2.2ghz running on this board. The BIOS is the latest etc. I am now wanting to upgrade the CPU on this. I run everything at normal settings... don't overclock etc.
    Not sure what I can go to with it and was wondering if anyone can advise please?
    Budget for CPU upgrade is £200... any help would be very much appreciated.
    Thanks in advance,
    Gazza.
    PS: Not sure if other specs are required but here goes:
    2 X 512MB PC3200 184 pin DDR400 (was thinking of just buying another 2 x 512MB)
    2 x 80GB Segate SATA HDD 8MB CACHE (was thinking of buying a Seagate Barracuda 320GB SATA HDD 16MB CACHE)
    256MB Radeon X800XT Platimun AGP Graphics Card (keeping this)

    Quote from: WaltC on 27-December-06, 10:36:15
    Check out this very brief thread of mine:
    http://80.190.215.245/index.php?topic=103825.0
    ...If your 3500 is a 90nm San Diego core, there's really nothing new for you there.
    If it's an earlier core, though, you might have difficulty in supporting all four 512mb DIMMs at 200/400MHz.  The San Diego 3700+ core I just bought to replace my 130 nm A64 4000+ has the same 1mb L2 cache as the A4000+ it replaced, but an improved memory controller which will support 4 double-sided 512mb DIMMs in this motherboard at full speed of 400MHz DDR.  The 3700+ is 90nm, and is simply generally a better core in terms of errata, power consumption, and, if you ever feel the need to experiment, overclocking.  I would imagine you should be able to pick one up at < 200 pounds, your cost (my keyboard doesn't have a "pound" key...)
    My last post in the thread mentions what bios version you should run with this cpu.
    Also, unlike the Newcastle or Winchester A3500+ cores, the A3700+ San Diego 90nm core supports SSE3 intructions.  Here's an article you might care to read describing some differences between the A3500+ Newcastle and Winchester cores:
    http://www.hothardware.com/viewarticle.aspx?articleid=613&cid=1
    Here's a current link to the 3700+ cpu for sale:
    http://www.newegg.com/Product/ProductList.asp?DEPA=0&type=&Description=A64+3700%2B+Retail&Submit=ENE&N=0&Ntk=all&Go.x=0&Go.y=0
    Many thanks for your reply, much appreciated. However a lot of that has just gone right over my head I'm afraid :(
    Do I have to strip the PC to find out which processor I have? The invoice I still have for the PC does not state what type it was. This was not a home built PC and was purchased from an online store in the UK.
    I have a list from the MSI site of processors that this MB is supposed to take. Am I right in saying that I could install an AMD Athlon 64 X2 4600+ Skt939 2.4Ghz 512KB Processor?
    Once again many thanks for your help.
    Gazza.

  • MSI GX70 to Richland CPU Upgrade

    Hi
    My GX70 Notebook is now getting too slow for some of the finest newest Games, for example Dead Rising 3 runs with 9-12 Frames, Assassins Creed Black Flag 12 frames, Need for Speed Rivals 3-10 frames, and Sleeping Dogs is not playable (1-8 frames).
    All other games till 2013 are fine, but these brandnew games are just a little bit too hardware hungry. And I guess the new Assassins Creed games which are released this fall, won`t run fine too and will stutter around with 9-13 frames.
    This has nothing to do with the graphics settings, because no matter how high or how low I set the graphic options, the framerate does not change (from ultrahigh to low settings maybe +2 frames) so the problem is not a GPU issue.
    The slow outdated AMD A10-5750, 4x2,4 GHz CPU completely bottlenecks the very fast and impressive Radeon 8970 graphics chip, and therefore I want a better CPU for up to date gaming performance.
    So I`d like to know if it is possible to insert this great CPU into my Notebook, the AMD A10-6800k Richland (AD680KWOHLBOX) for socket FM2 and 100 watts power consumption, and 4x4,1 GHz.
    Impressive, huh? :D
    Double the clock - double the fun, this should solve all the lagging problems and will make these extreme slow running games fully playable:
    http://www.heise.de/preisvergleich/amd-a10-6800k-ad680kwohlbox-a950987.html
    Can I just buy this CPU and put it into my GX-70 Notebook?
    Is the power supply strong enough for 100 watts CPU?
    Will the CPU clock really be 4x 4,10 Gigahertz?
    Will a BIOS update be necessary after inserting the new CPU? (I am really really afraid of flashing the BIOS, I bricked a Galaxy S3 mobile phone before, I really DON`t want to flash my notebook BIOS!)
    I am sorry because of my stupid questions, but I have never before built or modified a notebook, I build tower PCs till 2010 and the GX70 is my second Notebook.
    Thanks for your help and answers!
    Kind regards,
    Mystique

    well i dont think so most gaming laptops lately have soldered CPU to motherboard which means you cannot change cpu chip :/ but if you could then you would need to find a manual that tells you what type of cpu's are supported but i dont think GX70 has support for cpu upgrade due to it's cpu is soldered to the motherboard.
    I can be wrong since i tried to google up GX70 motherboard found diffirent motherboards most of them had nothing todo with a MSI laptop lolz so yeah correct me if i'm wrong.

  • Pavilion g6-1262sa CPU upgrade v2, Sandy Bridge = Ivy Bridge?

    Hi, thanks to the Pavilion g6-1262sa maintenance and servicing manual and this magnificient forum I've recently found out that replacing my i3-2330m is possible with all sandy bridge processors up to i7-2620m.
    Theese questions may sound silly but I continued my research and I've got couple more ideas to confront with reality.
    I do realise that compatibility is not only matter of fitting the same socket but also bios installed on certain motherboard, however:
    1. Do you think it would be possible to swap Sandy Bridge (2nd gen) i3-2330m for some Ivy Bridge (3rd gen) i5 -3210m? 
    2. Is the 32nm to 22nm manufacturing technology enough difference on it's own (even if the rest of architecture is the same) to prevent this from working? 
    3. Is bios of my g6 motherboard somehow identyfying installed processor? (if it's not on "the list" it will simply not run?" or is it only technical compatibility matter?
    According to some statements which I found on some IT forums and sites (and some self researched facts):
    Socket: both processors are compatible with BGA1023 socket. (at least that's what I found, if someone could confirm I would be grateful)
    Architecture difference: "The 3rd generation is called "Ivy Bridge," and is basically a copy of Sandy Bridge manufactured on a smaller scale, or die. However, Intel also focused on beefing up the integrated graphics in this generation."
    TDP: both are 35 W
    Cores: both are 2 physical (4 Virtual - thanks to hyperthreading I guess?)
    Power consumption: "the Ivy Bridge CPUs also use less power", "Ivy Bridge consumes a little less power; around 10w i think."
    Temperature: i5 -3210m goes 5*C higher than i3-2330m - shouldn't do much difference
    Looking forward to some replies, RacA
    This question was solved.
    View Solution.

    It is not a technical (socket) incompatibility since as you likely know Ivy Bridge and Sandy Bridge are backward compatible on most desktop motherboards. However, HP has only implemented 2d gen Intel Core processor compatibility on the HM65 Express chipset which yours has. Motherboards that will support 3rd gen CPUs use the HM77 chipset. There is no other motherboard that will fit in your chassis. 
    Your analysis above, which was pretty good, left out the chipset, which you always have to think about when assessing upgrade possibilities:
    http://www.cpu-upgrade.com/mb-Intel_%28chipsets%29/HM65_Express.html
    The HM65 does support a couple 3rd gen CPUs but none of them is on HP's list for your model. You could try one of the ones listed in the link I gave but I think there is a very small chance they will work.
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

Maybe you are looking for