Third Party Exchange Monitoring Software - PromoDag, MailScape

We are looking at some third party solutions for better monitoring of Exchange. Yes I know and I do a lot with powershell for reporting but after reading some reviews of these two products, I really like the idea of a centralized console to look
at everything. Just curious to hear from other admins experience with these two or any other third party tools used to monitor Exchange. Thanks.
Rich

Hi Rich,
I suggest use SCOM 2012 and install Microsoft Exchange Server 2013 Management Pack.
More details in the following links:
1. Microsoft Exchange Server 2013 Management Pack
http://www.microsoft.com/en-us/download/details.aspx?id=39039
2. Operations Manager
https://technet.microsoft.com/library/hh205987.aspx
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Similar Messages

Integration of Oracle Apps with the Third Party Label Printing Software

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Hi,
I assume, i have already setup profile 'WMS: Label Print Mode' to Synchronous - TCP/IP.
Basically, you dont have to create any concurrent program for XML creation, Oracle will do it for you 'out of box'.
Also set 'WMS: Synchronous TCP/IP label request delay' to 100, this is a required step, though none of the documentation talks about it.
if you think that all the requests are not handled correctly, then you will need to increase this delay further.
Lastly, verify that the printer is setup correctly in Oracle (Place where you specify IP Address and port)
Thanks,
Hrishikesh

Integration of Oracle Apps with the Third Party Label Printing Software(Bar

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Pl do not post duplicates - Integration of Oracle Apps with the Third Party Label Printing Software

Do Windows 8.1 Users Need Third-Party Anti-Malware Software?

Do Windows 8.1 Users Need Third-Party Anti-Malware Software?

It depend. Until you make decision update your Defender regularly and stick with general security measures.
Regards
Milos

Third Party Performance Monitoring Tools

Are there any Third Party tools that can map the user transactions to the CPU utilization on the database server?
What we are looking for is the ability to map the CPU time on the DB server to the transactions on the application servers. For example transaction X executed by user Y is utilizing Z CPU time on the database server.
Regards
Saif

Hi !
Before going the route of 3rd party software you might want to check out what you already have.
For example Oracle comes with the Enterprise Manager, which is pretty good in the area of the Oracle databases and also for the Application Servers (AS Control and Grid Control).
Other vendors might have the same.
WIth GridControl you can also get a lot of info about the machines that are in your network, but no possibility to manager other vendor's db's. (planned for a later version).
When you enter the market of 3rd party Enterprise Management tools you will come across suites like Tivoli and HP Openview. Although these are very good they are also very expensive and difficult to administer.
If your main concern is to monitor some db's of different vendors give the packaged tools you already paid for a try and evaluate later if you need more than these tools can offer.
cu
Andreas

UCCX Third Party API monitoring Probe

Anyone know of a third party UCCX probe that can be used to report back things like Call Abandonment Rate, Ring No Answer increases, basically any of the getStat variables, or Real Time Reporting variables, such that it reports back through API or something else to our monitoring software so I can configure alerts based on these values and thresholds we configure.
I'm not expecting this product to be free, I'm just interested in what the options are out there. To be clear I'm not looking for separate monitoring software, but more of a probe or something can be scalable across multiple clients networks. If you know of someone who has built this, or know of a company selling this style of product, please let me know.
Thanks,
-Ron

Hi,
UCCX CTI SDK.
Take a look at it at http://developer.cisco.com/
It might seem a bit outdated, but if you want something more modern, object-oriented, some companies offer .NET and Java wrappers, too. Please send a private msg for more info.
G.
Sent from Cisco Technical Support iPad App

Third Party System Monitoring

Hi All;
Is it possible to monitor following using solution manager.
1. Third party system (non-SAP i.e. non-ABAP n non-JAVA system)
2. Application Running on third party system.
3. files/logs generated and database update by an application on third party system.
If yes then please let me know how we can achieve this.
Thanks in advance.
Regards
Alok

Hi Alok,
There is a SAP Professional Journal on the website www.SAPpro.com by the name Manually registering a Non SAP system in SMSY by Doreen Baseler.
Hope this will help you out in case of adding a non-SAP system in the solution manager.
Please reward points if it does so.
Thanks
Manas

Home Monitoring and Control with a third party also monitoring and controlling?

I was wondering if anyone has tried to install Home Monitoring and Control with a third party monitoring, and or controlling the same devices. I know many systems offer multiple control points such as auxilary control touch screens. Has anyone made this work? I have Z wave devices on my home security system (lighting), and would also like to monitor them via Verizon. Possibly also adding some energy monitoring and control, that is not available via my security company. My security monitoring company provide support through Alarm.com, but has limited energy monitoring to thermostat control and such.
The only interactive control with my security company is for alarm monitoring and control, with limited lighting control. All of my devices are GE in the wall mounted lighting controls, and I would prefer to pay Verizon the few extra dollars for the additional features VIA the web, rather than pay Verizon. There used to be an energy package, that included the main power panel load and I thing Thermostat, but I believe some of the bundles have been split up.
There are other options out there now, but I have neen exploring. My GE Switches are from the Lowes Iris system. Much less expensive, and can replace existing wall switches, not like the power cord switches. Plus the store is four miles from my house.

I started with Verizon home monitoring, but if you read through the threads the service is extremely unreliable, still to this day. I am stillusing it, although I am waiting for a refund on the services that I have used since it is so bad but I bought a MiCasaVerde Vera3 system. You pay appoximately $300 for the unit and there is no monthly charge and you get all the features plus pretty much unlimited types of z wave devices to use on it. I would seriously consider using that before Verizon.

Third party upgrade automation software

Hi,
Has anyone had experience of using any third party upgrade software to reduce down-time? If yes, how effective has this been?
Secondly, has anyone used Panaya? They offer cloud based upgrade automation and maintenance solution.
Regards,
Shehryar

> Has anyone had experience of using any third party upgrade software to reduce down-time? If yes, how effective has this been?
Have you done a test upgrade and do you know where your bottlenecks are? There's a quite a number of possible things you can do to decrease your total downtime.
Markus

Third-party Password Management Software

Hi,
What are some of the 3rd party password mgmt s/w in the market that works well with Oracle Apps (ver 10.7 SC)? Understand that the password mgmt within Oracle Apps does not address the 3-times logout (when wrong password is supplied), password history of 1 level and password content mgmt.
Thks

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by James O'Brien ([email protected]):
My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions. <HR></BLOCKQUOTE>
James:
I've been involved on 2 projects that included integration into Projects. On both occasions Oracle's Activity Management Gateway (AMG) was used. AMG is the open interface for Projects. We used it on one occasion with Primavera Expedition to load budgets and the WBS and on another with MS Excel to upload budget information. ODBC and AMG was used on the MS Excel project.
Regards,
Robert
null

What is the best third party extension or software to create a flip book with zoom and clear text?

When I export a swf from Indesign with Page curl, the text is hard to read (blurry) and there is no zoom feature or navigation bar. Is there a specific software I should download instead of exporting from Indesign.

Well there´s plenty of solutions for that, which one is correct depends on what kind of content you wish to have. And you should also note that SWF/Flash based solutions are not compatible with mobile/tablet devices. Anyway if you
-need a solution for passive print replica content, you will find lot´s of different services and softwares which are able to convert your PDF to Flash/SWF. You can´t usually use any interactive elements or rich media in those cases.
-need to make your SWF with InDesign and you want to use videos, links, slideshows etc. Then you need a 3rd party finalizer which you can use to wrap your InDesign SWF to better working user interface. One solution is eDocker FLASH! Here´s a sample of InDesign SWF finalized with eDocker: http://old.edocker.com/_demo/edocker-online-demo/index.html
More info about the product: http://www.edocker.com/edocker/edocker-flash/ or eDocker :: eDocker2 Desktop Publisher®
I think eDocker FLASH! is in some kind of 50% discount right now.
-need to make publicaton that works with computer and mobile/tablets. Then you may have to drop Flash and check out HTML5 solutions. Some of the more advanced flip-page services are offering also conversion to HTML5 but be careful if you need interactive elements and/or rich media, most of them are ripping all that off. At least eDocker and 3dIssue are offering HTML5-solutions with possibility to use interactivity/rich media...
eDocker CREATE! HTML5 editor & InDesign plugin
http://www.edocker.com/edocker/edocker-create/
3Dissue
Digital Magazine Software | Create Digital Online Publications

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Integration with Third Party Project Management Software

My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by James O'Brien ([email protected]):
My company is looking for software that can be "bolted on" to Oracle Projects to provide more robust project managment functionality. We already know of two (Microsoft Project and Primavera), but we'd like to hear from other companies who may have implemented other solutions. <HR></BLOCKQUOTE>
James:
I've been involved on 2 projects that included integration into Projects. On both occasions Oracle's Activity Management Gateway (AMG) was used. AMG is the open interface for Projects. We used it on one occasion with Primavera Expedition to load budgets and the WBS and on another with MS Excel to upload budget information. ODBC and AMG was used on the MS Excel project.
Regards,
Robert
null

Third Party LCD Monitors - using the DVI port.

More often than not, manufacturers of LCD monitors do not address the compatibility of their products with the Macintosh computer. If there is an entry regarding use of their monitor with the Mac, it shows the use of the VGA (analog) port or the need for an adapter. In nearly every case tested, LCD monitors having a DVI-D input port can be operated from the DVI-I port on nearly all Mac graphics cards. Recent testing with a *PM G4 MDD (NVIDA 9000)* and an *LG W2600H* monitor proved that the Mac desktop opened at full monitor resolution. Only drawback with using a non-Apple monitor is that now the CPU requires manual startup from the front panel button; which is often hit-or-miss on the PM G4.

I have never had that problem before and I just got a viewsonic 20 inch lcd studio type flat panel monitor.

Third party CD burning software "overburning"

I have CDs in the mail 800 MB 90 minutes... I's wondering what kind of software can overburn? Perfect duplicate all on one CD

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Third Party Exchange Monitoring Software - PromoDag, MailScape

Similar Messages

Maybe you are looking for