Third Party PO - vertex error

Hi,
We have a PO for our US company code and US plant which calculates external taxes through Vertex. But the delivery address is based out of Brazil. So when the user tries to save the PO SAP gives the error below:
Tax jurisdiction code SP XXXX not allowed for tax calculation schema TAXUSX
Message no. 06260
Diagnosis
The jurisdiction code of item SP XXXX is not defined for this tax code.
Procedure
1. Check the jurisdiction code for the item, or the tax code.
2. Choose Item -> More functions -> Taxes to determine which jurisdiction code is defined.
Has anyone dealt with this kind of error? If yes, could you tell me what would be the solution?
Regards,
RP

Closed. The note content was viewed
Edited by: Patidar Prachi on Jun 23, 2011 3:32 PM

Similar Messages

PI SOAP access to third party Webservice,Return ERROR

Hi Experts,
I have one soap synchronous scenario access to third party WEBSERVICE,Return error.While testing the wsdl in soap ui, I am getting response, messages showing successfully processed. I think it is pi to send xmlns:ns1='http://tempuri.org/' on both sides should not be a single quotation mark, but I don't know how to adjust PI set. how do you see.
1、SOAP UI submitted to Webserver XML
[2014-05-26 08:47:24.662] --- Recv data from SocketId=272 Socket=10880
POST /MWGate/wmgw.asmx HTTP/1.1
Accept-Encoding: gzip,deflate
Content-Type: text/xml;charset=UTF-8
SOAPAction: "http://tempuri.org/MongateCsSpSendSmsNew"
User-Agent: Jakarta Commons-HttpClient/3.1
Host: 10.0.0.253:8082
Content-Length: 520
<soapen:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tem="http://tempuri.org/">
    <soapen:Header />
    <soapen:Body>
        <tem:MongateCsSpSendSmsNew>
            <tem:userId>DOA001</tem:userId>
            <tem:password>dennis</tem:password>
            <tem:pszMobis>1313773654</tem:pszMobis>
            <tem:pszMsg>1111</tem:pszMsg>
            <tem:iMobiCount>1</tem:iMobiCount>
            <tem:pszSubPort>*</tem:pszSubPort>
        </tem:MongateCsSpSendSmsNew>
    </soapen:Body>
</soapen:Envelope>
2、PI submitted to Webserver XML
[2014-05-26 08:36:08.725] --- Recv data from SocketId=271 Socket=10704
POST /MWGate/wmgw.asmx HTTP/1.0
Accept: */*
Host: 10.0.0.253:8082
User-Agent: SAP-Messaging-com.sap.aii.af.sdk.xi/1.0505
CallingType: SA
content-id: <[email protected]>
Content-Type: text/xml; charset=utf-8
Content-Length: 417
SOAPACTION: "http://tempuri.org/MongateCsSpSendSmsNew"
    <SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
        <SOAP:Header />
        <SOAP:Body>
            <ns1:MongateCsSpSendSmsNew xmlns:ns1='http://tempuri.org/'>
                <ns1:userId>DOA001</ns1:userId>
                <ns1:password>dennis</ns1:password>
                <ns1:pszMobis>13637731567</ns1:pszMobis>
                <ns1:pszMsg>Constant</ns1:pszMsg>
                <ns1:iMobiCount>1</ns1:iMobiCount>
                <ns1:pszSubPort>*</ns1:pszSubPort>
            </ns1:MongateCsSpSendSmsNew>
        </SOAP:Body>
    </SOAP:Envelope>
3、SXI_MONITOR   Payloads content:
<ns1:MongateCsSpSendSmsNew xmlns:ns1="http://tempuri.org/">
        <ns1:userId>DOA001</ns1:userId>
        <ns1:password>dennis</ns1:password>
        <ns1:pszMobis>13637731567</ns1:pszMobis>
        <ns1:pszMsg>Constant</ns1:pszMsg>
        <ns1:iMobiCount>1</ns1:iMobiCount>
        <ns1:pszSubPort>*</ns1:pszSubPort>
    </ns1:MongateCsSpSendSmsNew>
4、PI channel

Hi Nathan,
Have you tried the SOAP HTTP Axis function.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b092777b-ee47-2a10-17b3-c5f59380957f?overridelayout=t…
https://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/content.htm
Configuring the Receiver Axis SOAP Adapter (SAP Library - SAP Exchange Infrastructure)
Regards,
Jannus Botha

UNBW Material in a third-party Sales Order (error: account determination)

Hy @ll,
we receive the following error message when entering a non valuated material (MTART UNBW) in a third-party sales order item.
System is asking for the calculated budget and after the manual entry of the budget the following error message appears.
(the schedule line customizing populates the account assignment category X for the PR)
"Not possible to determine a consumption account".
any ideas? my assumption is that account determination OBYC can not be error source, because it´s a non-valuated material...
many thanks,.
Gregor

Please read OSS Note 95429 - MB01 for material type UNBW, third-party order
and
Note 83916 - Not possible to determine a consumption account

Third party scenario billing error.

Hi,
I am testing the third party sales scenario. I have customized my own settings .While creating bill for the customer I am getting the following error u201CNo billing documents were generated message: VF032u201Dwhen I checked further the log the message is u201Cthe item is not relevant for billingu201D.
I have checked the following settings in VOV7, VOV 8, VTFA and VTFL and they are as follows.
VOV7
Billing relevance: F
VOV8
In the shipping tab delivery type: EL shipping notification
and under the tab billing following settings are there
Dlv-rel.billing type :F2    Invoice
Order-rel.bill.type : F2    Invoice
Intercomp.bill.type : F2    Invoice
VTFA
In the transaction the target is assigned to the sales document type i.e in my case F2(Invoice) is assigned to ZOR and in the copying requirements the option is chosen as 012: Order related third party item and in the item category ZTAS is assigned with copying requirements as 12 : Ord Rel 3rd Pty Item and with the following settings
Billing quantity     F
Pos./neg. quantity   +
Pricing type         G
VTFL
In the above said setting invoice F2 is assigned with the shipping notification type EL and
copying requirements were chosen as 012
Target billing type : F2 Source delivery type : EL
Billing quantity     D
Pos./neg. quantity   +
VTAA
In this target sales document is assigned to the source sales document and the copying requirements as 303 .
The process is followed : Sales orderu2014PRu2014POu2014Inbound delivery (shipping notification)u2014GRu2014Invoicing .
In spite of all these settings I am getting the error u201CNo billing documents were generated message: VF032u201D: u201Cthe item is not relevant for billingu201D.
Please suggest me further.
Rabi

in your process you missed the invoice from your vendor
F: Order-related billing doc. - status according to invoice quantity
Relevant for order-related billing documents based on the invoice receipt quantity (third-party business transaction). The system transfers the order into the billing due list only after the vendor invoice has been received and processed in the purchasing department. After the receipt of each invoice, a customer invoice is created for the quantity that appears on the vendor invoice. The order has status "Billed" until the next vendor invoice is received.
The process is followed : Sales orderu2014PRu2014POu2014Inbound delivery (shipping notification)u2014GRu2014invoice from vendor - Invoicing the customer .

Third party system throwing error " No Direct Postings can be made in G/L "

Dear all
i have a problem, when doing third party ,In me21n purchase order screen i am getting an error " No direct postings can be made in G/L a/c 41201100 in CoCode ." and when i checked the G/l account tht G/L account stands for " Change in Stock FG A/C"
do i have to ask my FI consultant to change the Gl account, or how should i go and do the processing ,
i am doing thrid party for the Finshed goods.
Kindly Guide me on this
with regards
kumaresh

Hi Kumaresh
While creating ME21N as you are getting error " No direct postings can be made in G/L a/c 41201100 in Co Code ." This error you faced because you have used a Finished material. and for finished material separate G/L account postings might be there and for Trading goods material Separate G/L account posting might be there. So Consult your FI consultant related to posting
NOTE : Kindly close the threads which have been solved
Regards
Srinath

Third party posting run error- Garnishments

I am running third party remittance posting run for garnishments and getting thr following error for few employees.
For perno/ seqno 4323 237 not in GRDOC.
Please advice. How to fix this issue.

See the following threads:
How to Fetch a data from HR Master Tables?
configaration for Garnishments
Regards,
Howard

Third-party keyboard caused error when shifting in iMessage

I Just upgraded to iPhone 6 plus and immediately install the 8.0.2. When using iMessage, the third-party keyboard caused an error when shifting between keyboards as in the picture. The selection animation was shifted to the left beyond the screen. The problem was gone when I deleted the third-party keyboards (fleksy and riffsy gif). The error also did not occur in email app or Safari.

Reset your phone - no data loss
Restart or reset your iPhone, iPad, or iPod touch - Apple Support

Third party help desk error

Hi everyone,
I am trying to connect a third party to my Solution Manager help desk. The third party is an ECC 6.0 SAP System.
I reproduced the Service Desk WebService API in the third party and it works fine .
I have a problem when I follow the instructions in SolMan to configure the third Party. The step when I have to create the HTTP destination to third party I write the path of the Web services( like /default_host/sap/bc/srt/rfc/sap/zict_api_copy) but I get the error SOAP nº 112).
If I go to SICF in the third party system I get the same error with this Web Services but if I test it in the WSADMIN it works fine.
Thank you in advance,
Regards,
víctor

Hi Sebastien,
Can you pls tell me whether it is possible to integrate SolMan's service desk with CA's service desk?
Any informative link where I can get these details pls?
I am also posting this as a seperate query to enable me to reward points.
Pls help.
best regds,
Alagammai.

Third party material delivery error

I have made some third party material, but as I do MIGO then Its making the stock available in the storage location but I m not able to deliver that material to my customer
Do help me out in this
Link: [Hemant]
Edited by: Hemant Saxena on Feb 2, 2009 3:28 PM

Hi
Third party sales means that material is not manufactured by us and the same is supplied to our customer from a third party vendor
We receive the sales order from our customer
Up on receipt of sales order or saving a purchase requestion is created automatically by the system
Then MM department process this purchase requestion and make a PO and that is send to a vendor
The vendor delivers the goods to our customer and he gives us the invoice
Upon receipt of invoice from the vendor we bill our customer
This a normal third party process
These whole settings are controlled by item category group and item category and schedule line category
For a third party material item category group defined in sales org data 2 tab of MMR is BANS
The item category determined in sales order will be TAS
The schedule line category determined in sales order will be CS
Thre are some very important settings in item category TAS and schedule line category CS which controls these whole 3rd Party Sales
There is another process is also practised (not so commonly) sometimes that is from vendor we take the goods to our plant and inturn we deliver to our customer
The item category determined in this case is TAB
the issue i think relates to this
Regards
Raja

PO Third Party History - Amount Error

Hi,
I am having a big problem with a PO Third Party History which has the same value in Quantity and Amount. The amount value is incorrect. Please your help. I've checked MB51 report and the amount is Ok
Thnks,
Luis G.
Edited by: Luis Ganoza on Aug 16, 2011 11:41 PM
Edited by: Luis Ganoza on Aug 16, 2011 11:41 PM

Enter PR no In PO while creating it with refereence to contract. Po will get updated in SO doc Flow.
In future do not convert PR into contract as it does not have scdedule lines to be sent to vendor, you need to release po for it to send schedule, as the result there is break betwween relationship chain as PR no is not copied into PO.
Regards
Sanjay Kohli

Can't delete third party app, Trash error code -60008

I purchased a new app with no reviews (I know, don't say it) and it's broken so I'm trying to delete it but I'm getting an error code when I drag it to Trash. The error says
"The operation can't be completed because an unexpected error occurred (error code -60008)."
When I check 'Get Info' to see what the Permissions are and try to change them (so I can delete it) it says "You have custom access" and shows system as Read & Write, then shows wheel, and everyone as Read only.
When I click on the Lock icon, it shows as unlocked for a few seconds, then changes back to Locked without asking for my password, so I can't even troubleshoot by changing permissions.
Help? All I want to do is delete the App from my system.
[Yes, I have contacted the developer, the guy has stopped responding to me so I can't get any help from him.]
Thanks guys!

Try this.
1) Reboot, to make sure that that none of the files within the "app" is still in use.
2) Try emptying trash while holding down the "Option" key.
If that doesn't do it then take the nuclear option by using the "sudo" command to delete your trashes regardless of permissions. Sudo elevates you to the all powerful "root" user to execute a specific command.
http://reviews.cnet.com/8301-13727_7-57600785-263/force-empty-that-stubborn-tras h-bin-in-os-x/
If that doesn't do it then the "app" may have been a trojan/malware and could have installed some type of background process or is launching at boot or login. In that case, I recommend doing some Google searches of "remove [app name]" and you should find specific intructions for removing it.
If you find that Google searches indicate that the the app is indeed malware, then please help others by naming the evil application so others here can assist and/or know to avoid the application.

Third Party Sales - Billing Error - Sales Order- PR- Contract- PO

Dear Experts,
I came across this scenario where the order related invoice was not getting created.
Regular Scenario : Sales Order ->PR->PO->MIGO->MIRO and SD Invoice : This is working absolutely fine.
New Proposed Scenario : Sales Order -->PR->Contract->PO->MIGO->MIRO and then SD Invoice. The problem is that in document flow of the sales order, the PO created with reference from the contract (contract is created with reference from PR) is not showing up in the document flow. Since it is not showing in the document flow, the qty to bill is zero (billing relevance is F). The log in VF01 tells that there is qty to bill.
Can you help.
Regards,
AHD

Enter PR no In PO while creating it with refereence to contract. Po will get updated in SO doc Flow.
In future do not convert PR into contract as it does not have scdedule lines to be sent to vendor, you need to release po for it to send schedule, as the result there is break betwween relationship chain as PR no is not copied into PO.
Regards
Sanjay Kohli

Third party PO on hold

Hello Experts,
My client is creating third party PO with reference to PR automatically created from a Sales Order.
The PR has 50 line items. Now in mid way he wants to put the PO on hold, but the system is not having an option for holding a third party PO.
Same process when I'm doiing manually, i.e. direct entry without any reference, there is an option for holding a third party PO.
How do we hold a third party PO created with reference.
Rahul

This is from the SAP Documentation :
Enjoy purchase orders cannot be put on hold if any of the following criteria apply:
The PO contains service items
The PO contains "third-party" items
Commitment errors are involved
Subsequent (period-end volume rebate) settlement is involved
I guess there isnt much you can do in this case, as it is standard SAP behaviour.

Edit In third party software

I got this error message when processing: Photo > Edit In > Silver Effect Pro (third party software):
Unexpected error performing command, bad argument #1 to 'lower' (string expected, got nil)
Please help, thank you.

This is a known bug in LR4.0. Try LR4.1 RC2.
Beat

Third party process - error

Dear all,
In the third party process, have we to create outbound delivery?
I have created PO from PR of a third party sales order. And now, i don't understand to delivery to customer.
Pls tell me solution.
If we have to create outbound delivery from that sales order, i get errors:
Item category TAS is not defined and Item category TAS is not defined, so item 000010 will be disregarded. I also checked in VOV4, VOV6, VOV7.
Thank you,

Hi
In third party scenario the material is delivered to your customer thro out side vendor
You are billing your customer
Vendor is billing you for the material he has delivered to your customer
Here we dont make any delivery
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material u2013 Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the configuration and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distribution channel, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Go to Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Click on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save
Hope the process is very clear to you now
Regards
Raja
Edited by: ramanathan raja on Sep 18, 2008 3:06 PM

Third Party PO - vertex error

Similar Messages

Maybe you are looking for