This.layout with two pages and cover sheet

Hello @all,
in the documentation for the "doc properties" and "layout" section I only find the following strings:
SinglePage
OneColumn
TwoColumnLeft
TwoColumnRight
TwoPageLeft
TwoPageRight
I set it for the active document with the following command in my JavaScript:
this.layout = "TwoPageLeft";
But what is the right entry/string, if I want the "two pages view" with an "single page"-cover sheet?
That means, I need a command/string for my document where only the first page is in the middle and alone and the other pages (starts at the second page) must be two next two each other.
Regards,
Jessi

And i suppose i could suppress any other fields from page one based on the same flag. But ideally as they layout is common i was hoping not to have to do a subreport to lay it all out again.
Could i not based on a flag on the group footer or header say if this flag is true start a new page and then on the feilds the ones i want to hide or show say something like if page two and x is ture then show or hide as need be??

Similar Messages

  • How do I print front and back with two pages per sheet? (OSX Lion)

    I can't find a simple solution to my situation...
    I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2. 
    I want print two PDF pages onto one printed sheet, and I want to print front and back.  When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for.  But when I tell it to print odd only or even only, it changes the print selection.  Here's what happens...
    Let's say I have a PDF document that is 20 pages long.  When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2.  When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
    In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
    So that I'm being clear...
    This [  ] is a printed page.  The numbers inside the brackets represent the page numbers in the PDF document...
    What I want to print is this...
      FRONT   ||  BACK
    [1,2]    ||  [3,4]
    [5,6]    ||  [7,8]
    [9,10]   ||  [11,12]
    [13,14]  ||  [15,16]
      [17,18]  ||  [19,20]
    What would end up printing is this...
      FRONT   ||  BACK
      [1,3]    ||  [2,4]
      [5,7]    ||  [6,8]
      [9,11]   ||  [10,12]
      [13,15]  ||  [14,16]
      [17,19]  ||  [18,20]
    Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

    I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
    You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
    ~Deepak

  • Firefox start with two pages. One says welcome to Firefox etc. And the other is my homepage (google). I want to stop the first page. How can I do this??

    Firofx (5.0) starts with two pages. One is the welcome to Firofox and also that there are Add-ons available. The other one is my homepage (google). I want to stop the first page. How can I do this?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

    Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

  • 2-column layout with correct page breaks

    Hi there,
    I am trying to produce a 2-column layout in my form.
    The problem is: These columns stretch over more than one page and I just cannot get the page breaks right.
    I have a flowed layout with two adjacent subforms which form my columns. In these column subforms I fill lots of data from XML.
    Problem 1 is: At the end of the page I miss about 5 lines. They vanish in the page break.
    Problem 2 is: My second column starts getting filled only on the second page (which happens to be the page where the first column ends).
    I also tried this with one table with exactly one row. But there all lines after the first page disappear and I get empty pages instead.
    Has anyone ever come across this problem?
    What is a good safe way to build dynamic 2-column forms?
    Ulrich

    Hi Paul,
    the former. It is NOT like in a newspaper where the content runs from left to right from one column into the next and finally into the leftmost column of the next page.
    Im my case the content of the 2 columns is completly separat from each other: The data in the left column is distincly left-column-only data. As is the data in the right column distinctly right-column-only data.
    Actually it is not even sure, that the left column is longer than the right.
    It is absolutly o.k. to have  3 pages where the left column is empty and only the right column is filled.
    An example would be: Technical data of two articles to be compared: Left is the Mercedes-data and right is the BMW-data.
    Ulrich

  • How to create a custom layout with two rows

    hi ,
       i have a requirement of creating the portal page layout with two rows. First row has one container with 100% width and second row has 3 columns (30:40:30).
    How to create the layout?
    what are the modification in portapp.xml?
    Thanks and regards,
    Saravanan

    Hi,
    Check this:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/efa44d27a21a7de10000000a422035/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/efbac120711a71e10000000a422035/content.htm
    Here is example portalapp.xml:
    <?xml version="1.0" encoding="utf-8"?>
    <application>
      <!THIS FILE IS A COPY OF THE ORIGINAL VERSION STORED IN THE PCD. PLEASE DO NOT CHANGE IT!>
      <application-config>
        <property name="Vendor" value="sap.com"/>
        <property name="SecurityArea" value="NetWeaver.Portal"/>
        <property name="SharingReference" value="com.sap.portal.htmlb,com.sap.portal.useragent,com.sap.portal.pagebuilder"/>
      </application-config>
      <components>
        <component name="fullWidth">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="1 Column (Full Width)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying one full-width column"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="fullWidth.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConF"/>
            </property>
          </component-profile>
        </component>
        <component name="light_fullWidth">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 1 Column (Full Width)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying one full-width column"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_fullWidth.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConF"/>
            </property>
          </component-profile>
        </component>
        <component name="narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the left"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="narrowWide.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_narrowWide">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 2 Columns (Narrow:Wide)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the left"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_narrowWide.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="wideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="wideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_wideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 2 Columns (Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Two-column layout displaying the narrow column on the right"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_wideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="equalWidths">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="2 Columns (Equal Widths)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying two equal-width columns"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="equalWidths.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_equalWidths">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 2 Columns (Equal Widths)"/>
            <property name="com.sap.portal.pcm.Description" value="Layout displaying two equal-width columns"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_equalWidths.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="narrowWideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="3 Columns (Narrow:Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Three columns displayed in a narrow:wide:narrow layout"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TagLibHtmlb" value="/SERVICE/com.sap.portal.htmlb/taglib/htmlb.tld "/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="narrowWideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConM"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont3" value="column3">
              <property name="plainDescription" value="Column 3"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
        <component name="light_narrowWideNarrow">
          <component-config>
            <property name="ClassName" value="com.sapportals.portal.pb.layout.PageLayout"/>
            <property name="ResourceBundleName" value="pagebuilder_nls"/>
            <property name="SafetyLevel" value="no_safety"/>
          </component-config>
          <component-profile>
            <property name="EPCFLevel" value="0"/>
            <property name="ComponentType" value="com.sapportals.portal.layout"/>
            <property name="com.sap.portal.pcm.Title" value="Light 3 Columns (Narrow:Wide:Narrow)"/>
            <property name="com.sap.portal.pcm.Description" value="Three columns displayed in a narrow:wide:narrow layout"/>
            <property name="com.sap.portal.reserved.layout.TagLibLayout" value="/SERVICE/com.sap.portal.pagebuilder/taglib/layout.tld"/>
            <property name="com.sap.portal.reserved.layout.TemplateFile" value="light_narrowWideNarrow.jsp"/>
            <property name="AuthScheme" value="anonymous"/>
            <property name="com.sap.portal.reserved.layout.Cont1" value="column1">
              <property name="plainDescription" value="Column 1"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConL"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont2" value="column2">
              <property name="plainDescription" value="Column 2"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConM"/>
            </property>
            <property name="com.sap.portal.reserved.layout.Cont3" value="column3">
              <property name="plainDescription" value="Column 3"/>
              <property name="orientation" value="vertical"/>
              <property name="designClass" value="prtlPageConR"/>
            </property>
          </component-profile>
        </component>
      </components>
      <services/>
    </application>
    Greetings,
    Praveen Gudapati

  • Report with two pages

    hi all
    I am designing a report which has two pages , i completed first page, i need to insert second page
    how to design report with two pages
    Thanks in advance
    Krish

    Hi,
    Usually,any report automatically adjusts its page numbers as per the quantity of data that needs to be displayed.However, if your specific requirement is to show certain data on one page and the remaining on another then you can simply insert a group on a valid field.
    Following is some information from the Crystal Reports Online Help menu:
    New Page After:
    - When the End of Section check box is selected, the program inserts a page break after the section.
    - The Page Header and Page Footer appear on each page.
    - Use New Page After in the Group footer section to print each group on a separate page.
    May be, if this is not what you are looking for then please elaborate on the report design/data

  • Viewobject with two criteria and two af:query

    hi every body
    jdeveloper 1.1.6
    i have a viewobject with two criteria , and in view controller i have af:query for each viewobject criteria , what i want when i click on Search button on one of any af:query ,is to Execute the query of another af:query beside the clicked af:query.
    thanks in advance
    maher

    maher,
    I don't understand your use case. If you oly use one VO which has two VC where each VC is mapped to an af:query on the page, it doesn't make sense to execute both of them together. If you do this the resutl set from the first query would be overwritten by the second query.
    Or do you just want to 'and' the two VC into one query and get the result as select ! from table where (vc1) and (vc2)?
    Timo

  • Verizon is using the Elipsis tablets to steal data from their customers.  The only way to stop data from registering as cellular data is to pull the SIM card.  This occurs with wifi enabled and cellular,dara disabled.  If,you take your tablet to a Verizon

    Verizon is using the Elipsis tablets to steal data from their customers.  The only way to stop data from registering as cellular data is to pull the SIM card.  This occurs with wifi enabled and cellular,dara disabled.  If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade.  You will then have to remember to downgrade your plan or continue to pay for more data.  Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise?  If cought can I just give the product back and say "oops, sorry"

    Today, my FCC complaint hit the same person working on the BBB complaint.  Jimmie has been very nice and seems willing to work with this problem.  We have been able to come to an agreement.  I paid the purchase price for the phone and he returned my upgrade and unlimited data plan.  This is what would have occurred if Verizon had given me correct information to begin with.  I am happy with this result.  He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure.  I am also confident that I would not have resolved this without complaining to BBB and or FCC.  Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client.  Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints.  He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad.  Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon.  Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

  • Using windows vista with two users and I can only open books with adobe digital editions on one account?

    using windows vista with two users and I can only open books with adobe digital edition

    You must authorize the second computer with the same Adobe ID.
    There are sometimes issues with this registration: if you have them ....
    Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
    Uninstalling and reinstalling does not help.
    Unfortunately, it often then gives misleading error messages about what is wrong.
    A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
    This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your (old) Adobe ID.

  • When I download a PDF, a user manual for instance, the page is black and the font is green, how do I change this to a white page and black script?

    When I download a PDF, a user manual for instance, the page is black and the font is green, how do I change this to a white page and black script?

    Try opening it with Adobe Acrobat Reader. 
    Note: Appleworks is the Apple office like application that stopped being able to run with Mac OS X 10.6.8.  If you have a question particular to 10.9, I would ask in the 10.9 (OS X Mavericks) forum.

  • When I close firefox window and later open firefox window it opens with blank page and nosidebar bookmarks

    when I close firefox window and later open firefox window it opens with blank page and nosidebar bookmarks

    Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
    #Stop the Firefox process:
    #*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
    #*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
    #*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
    #Why Firefox may hang:
    #*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
    #*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
    #*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

    We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

    You did nothing wrong, but the photo app puts stuff in chronological order.
    You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

  • I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac.  I work with two screens and now I seem to have programmes at the top of both screens which I didn't before.  any advice?

    I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before.  Can you please help me?

    Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
    I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
    After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
    Good luck to you...

  • Pie chart with two measures and date dimension navigation not working

    Hi Experts,
    Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
    Thanks
    V

    Hi Deepak,
    I had time dimension in the RPD.
    I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
    I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Maybe you are looking for

  • Failed to obtain/create connection from connection pool after redeploy

    I have a web application (.war) that uses a jdbc connection pool. The application works fine, however after I redeploy it using the administration console I get "Failed to obtain/create connection from connection pool [ Datavision_Pool ]. Reason : nu

  • Macbook can't detect external display via DVI cable

    I just bought Samsung PX2370 monitor and attempt to connect it with my Macbook Aluminum (late 2008). I have mini display port to DVI adapter and DVI cable. When I hook up my Mac, nothing comes up. The screen on macbook goes blue briefly and then back

  • Procedure call and shell script

    When i try to pass a shell variable to a procedure call in a shell script it does not work. But a SQL command ( insert ) has no problem taking the shell variable. Has this something to do with context switch. How to get around this prbokem. `sqlplus

  • CSS and Template availability in WebI Report

    Hi All, Does WebI provides facility to import CSS Stylesheet for using those settings in report? Can we create Templates in WebI? Our requirement is to decrease the manual task by using single CSS Stylesheet and Templates for creating multiple/many R

  • G4 Main Hard Drive not showing up on desktop or in folder side list

    I am able to access my hard drive, it boots up in to OSX from it just fine. However I am unable to see its icon on my desktop and can see no icon in the folder views. I have run disk utility numerous times and there is no problem ever detected. It is