This vault could not be loaded.

Hi, i have an 32GB Ultra USB 3.0. I was in the process of loading some files onto the vault and then deleting the source files on the computer when asked if i wanted to. I had loaded the files onto the computer and deleted most of the files when i got an error message that said that it was write protected. I tried to press try again, ignore and cancel but i still got the same error message. I could also not quit the program normally so i forcefully stopped it with the task manager. When i today tried to acess the vault again i start the program and i gt an error message after i log in saying: "This vault coul not be loaded, it may be located on another computer or the original vault files ha been manually removed". The vault acess vault is still on the flash drive and the DAT-files are still on the flash drive. Thank you for any assistance.

Hey all !!! go to the SanDisk Secure access vault> Go to system files> Find the .idx.bak file and rename it is vault.idx it worked for me... make sure you copy that whole folder to secure your content before you play with this...LOLzzz.. Njoy..!!!

Similar Messages

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. pleas

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working

anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

Hello-
I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
A quick comparison of systems:
Mine:
HP dc7700s desktop
Windows XP OS
Adobe Master Collection CS3
Hers:
IBM compatible laptop
Microsoft Vista
Adobe Premiere Pro CS3
Adobe Photoshop CS3
I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
Thank you!

>project will be opened in Desktop mode
I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
What is the codec and properties of the files in that project?
Are you sure they are 100% standard?

"PDE bundle could not be loaded," HP 7510 All-in-One, Mac OS X 10.9.5

The selection "PDE" in the print dialogue box is listed with a strikethrough.
Choosing PDE displays the message "This bundle could not be loaded because the required components could not be found. Contact the bundle's creator ... for the newest version. HP PDE 4.6.0."
Haven't been able to find HP PDE download.
Any help appreciated.

You need to download the full Mavericks installer from the AppStore. You need an Apple ID and you must claim the OS in your account. If you are already running 10.9.5 it will tell you so. Opt to download anyway. Inside the installer is the InstallESD.dmg.
However, this is an installer, not a "clone-able" image. If you are looking to make a clone, then boot from the Recovery partition and opt to reinstall the OS fresh. Or better yet, get an external drive and install Mavericks to the drive. Then add all your software and customizations that are not user or device specific. Once done, you can then capture a DMG can can be used to image other systems.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

When i want to download an app in app store give me an error number and i could not down load.how i can solve this error number?

Hi Amir.09395340646,
Welcome to the Support Communities!
What app are you trying to download? Is it iPhoto for iOS? What error message are you receiving? The first thing I would suggest is to log out of your iTunes Store account on your iPhone. Then restart the device and log in again.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
If the above did not resolve your issue, follow the troubleshooting steps in the article below.
The link includes the complete details and screenshots, but I've highlighted a few points for you:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
- Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
- Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
- Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
- Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
- Try resetting (turning off and then on again) your Wi-Fi router
- If the issue still persists see, iOS: Troubleshooting Wi-Fi networks and connections or iOS: Troubleshooting Wi-Fi networks and connections.
I hope this information helps ....
- Judy

A message saying new vault could not be added. ensure that destination path has appropriate permissions. What does this mean and what do I do about it?

Adding new vault a message saying "New vault could not be added. Ensure that destination path has appropriate permissions and that vault has a unique name.
What do I do?

Check to make sure you have write permissions on the folder you are trying to make the vault in and that there are no other vaults in that folder using the name you are trying to use to make this new vault.

Transfer to new PC: The project could not be loaded, it may be damaged or contain outdated elements

The Problem
I have transferred a large and functioning Premiere Pro project to a more powerful PC but am unable to run it, stopped by the error message "The project could not be loaded, it may be damaged or contain outdated elements".
Facts
The new PC has a 6-core processor and a different hard drive configuration but the operating system on both is Windows 7 and both PCs host up-to-date Premiere Pro CS6 (as part of Adobe Production Premium). The PCs are networked and Premiere Pro on the old PC can successfully load and run the project file located on the new PC, proving that the transferred file is not damaged. Also, preceding versions of the same project generate the same error message when run on the new PC except, very oddly, for earlier versions saved on or before 28 June 2011, when the project was only a fifth of its current size; those versions load correctly. Contemporary notes show that the editing carried out that day was simple timeline editing, ie no After Effects etc (that came later), and the project has worked fine then and since.
So I don't have a damaged project file and don't know what "outdated elements" means.
Help
Any help solving this problem would be much appreciated.

Hi Vinay
As suggested I renamed the additional folder, created a new project, set 'Custom' editing mode, 'Microsoft AVI' as the preview format with 'Uncompressed' codec.
Unfortunately the results were similar to before: On importing the original project into the new project I was sequentially asked for the locations of various files, including After Effects .aep files. The final file location request, for an mp3 audio file, was followed by lots of conforming and indexing. During this process the 'Where is the file XXX.mp3? window stayed locked open. Eventually, with all conforming etc finished, this window was still open and locked. Clicking anywhere on the screen caused a 'ding' and another, smaller, box opened, listing three .aep files. This box asked no questions and gave no options for selecting a file location so, with the topmost file highlighted, I just clicked 'ok' and the box disappeared, leaving the 'Where is the file XXX.mp3?' box still open.
The importing process took about 30 minutes. I waited another 10 minutes, in case something was happening in the background, but with the Task Manager CPU usage value sitting on 0 or 1%, I used it to shut down the project.
For what it is worth, I created a simple new project on the old PC – just a few video clips and transitions in a single sequence (no After Effects etc). This project was then transferred to the new PC and it opened successfully.
Again I remain grateful to you for this and any more advice.
Best regards
Dave

Firefox reset completely, attempted to restore old Firefox data, will not open saying that profile could not be loaded.

Hello,
When returning to my computer, I attempted to open Firefox and received a prompt to either start Firefox in safe mode or reset it. I tried safe mode at first then proceeded to reset it as well. Losing all of my add-ons/extensions/etc, I tried to solve the problem by restoring my profile with a folder that appeared on my desktop titled "Old Firefox Data". After following instructions to restore my profile, a window now pops up saying that my profile could not be loaded and Firefox just does not open at all. Is there anyway to recover my old profile? I tried following another suggested method but when searing for my profile through the files, it could not be found.
Thank you!

'''https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile'''
Recovering important data from an old profile
If you've had to create a new Firefox profile, this article will explain how to recover information like bookmarks, history and passwords from an old one.

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll

Does anyone know what causes this error? The application installed on my machine is using Adobe Air.dll version 2.0.3.13070
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(2b84.2908): Application hang - code cfffffff (first/second chance not available)
eax=00000000 ebx=05105dbc ecx=0c013503 edx=00002b84 esi=77f15b70 edi=00000002
eip=00a68972 esp=0012e03c ebp=00000000 iopl=0         nv up ei pl zr na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000             efl=00040246
Unable to load image c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Adobe AIR.dll
*** ERROR: Module load completed but symbols could not be loaded for Adobe AIR.dll
Adobe_AIR+0x58972:
00a68972 8bec            mov     ebp,esp

Hi,
Check weather its right path or not.Even check the call interface,weather you are giving the right one or not.
Regards,
Srikanth

Approval Center Error: One or more categories of approval could not be loaded

Hi Team,
We are using EPM 2013 version , recently one of our user encountered a problem with Approval Center while accepting task updates, on the Default welcome page he has 112 Pending approvals but while clicking Approval center he getting error as "Error:
One or more categories of approval could not be loaded when user wants to approve" We have checked on the following possibilites but still we are facing this issue Kindly help us on this
1. I have checked user permission He has Project Manager Access and Timehseet Approval Access
2.While changing the task ownership to another PM and the task is reflecting correcly on the new PM's Approval center while reverting back the task owneership he faces same issue.
3. He is trying for the task updates, we have tried re sving user profiles but nothing changed issue still occours
4. Checked on the ULS Log And find the error
Permission denied: User i:0#.w|enterprise\User01
does not have global permission 'ManageServerConfiguration'.
Please revert for any other information required.
Thank you
Senthil Gopi
Thanks and Regards, Senthil Gopi

Hi,
This is a known bug.
You can find a workaround here:
http://www.msprojectnow.com/Blog/tabid/142/entryid/828/Project-Server-2013-Error-loading-Approval-Page.aspx
Regards,
Philip
Verlinden Philip

Error: One or more categories of approval could not be loaded when user wants to approve

Two of my PM's are getting the error shown in the title of this post (Error: One or more categories of approval could not be loaded when user wants to approve).    The "Related Topic" issues a work around of using the rules to "automatically approve the
offending items".   This did not work for us.   Has anyone else experienced this issue?
Thanks,
~RK

Hi Marc - Per ytour request:
The PM does the following:
1. Access PWA Home page and review messages
2. Clicks on “You have 1 timesheet from resources pending your approval” message
3. Approval Center Page loaded with “Error: One or more categories of approval could not be loaded” and “There are no new approvals to review at this time. If you have published your plan and
still do not see approvals, have your resources submit updates from “Tasks” of “Timesheet”” messages.
We've made certain the Schedule is published and the timesheet was submitted correctly.
Expected behavior: Timesheet records should be available for review and approval.   Instead, the PM gets the screen below with the error message

Solaris Management Console toolbox could not be loaded

Hello,
when I start SMC I get this error, toolbox http://ultra:989/toolboxes/smc.tbx could not be loaded. I only noticed this yesterday, and I think it is related to some patch that was applied recently. When I did wget http://ultra:898/toolboxes/smc.tbx I got these headers
HTTP/1.0 200 OK
Date: Thu, 27 Oct 02005 21:21:52 GMT
Server: Tomcat/2.1
Content-Type: text/plain
Servlet-Engine: Tomcat/2.1 (Java 1.4.0_01; SunOS 5.9 sparc; java.vendor=Sun Microsystems Inc.)
Last-Modified: Tue, 31 Aug 02004 21:27:14 GMT
and wget complains of
Last-modified header invalid -- time-stamp ignored.
perhaps it is this header that's invalidating the download and so SMC complains?
This is solaris 9 on an ultra 5, fully patched (up to yesterday).
Thanks for your help!

I seem to have come across the same issue as well. On an Ultra 2, I'm running Solaris 10 1/06 (after an upgrade from Solaris 10 5/05). SMC 2.1 was working fine before I applied the latest Recommended Solaris 10 patch cluster. Now when starting smc, I get the message,
"Server Not Running
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running."
with stop signs for all the management tools. I do not have patch 121309 installed which I suspect applies to the 6/06 release. In comparison to a working system, neither workstation had the entry for "smc 898/tcp" in its /etc/services file. I added it but did not make a difference so I removed the entry.
"/etc/init.d/init.wbem stop/start" did not do the trick. Using dananderson's advice in,
http://forum.java.sun.com/thread.jspa?threadID=5057915
I ended up having to completely remove and re-add all packages that had to do with smc using the Solaris 1/06 installation CD set. I confirmed smc was working again without the error. Update Manager suggested I add patches 121308-08 and 124188-02. Hesitantly, I added those two patches, rebooted and confirmed smc produced the error message again. I removed patches 121308-08 and 124188-02 and smc started working again. I will have to refrain from applying those patches so it continues to run.
I wish I had further explanation as to why those updates are killing my smc.

How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

How to resolve Error "Adobe Acrobat (AcroExch.App rc=-2147221005) could not be loaded"

What is your operating system? Reader version?
You get this error when doing what?

Specified Driver could not be loaded due to system error 5

Hello,
I am trying to run oracle 9i on my lap top. I installed the package from the website and got everything installed correctly. I checked my sqlnet.ora and tsnnames.ora files and the test connection in the ODBC driver is working fine.
However, as i try and connect to the database through my ASP application i get the error:
Code: 80004005
Specified Driver could not be loaded due to system error 5
I have been searching these forums for an answer and the closest solution i found was that something may be wrong with my path variable. I checked it and everything looks fine, it points to my /bin directory.
I am not sure if it is something wrong with my driver (though i installed the latest one available) or something else. I Would appreciate any help anyone can offer.
Thanks
samir.

The user that IIS runs as doesn't have appropriate access to the Oracle directory or to ODBC. There's a good, recent Usenet thread on this
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=3d119df8%240%24234%24ed9e5944%40reading.news.pipex.net&rnum=2&prev=/groups%3Fq%3DASP%2Bsystem%2Berror%2B5%2Bgroup:comp.databases.oracle.*%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26scoring%3Dd%26selm%3D3d119df8%25240%2524234%2524ed9e5944%2540reading.news.pipex.net%26rnum%3D2
I'm assuming that you've verified that you can, say, create a new DSN with the Oracel driver and successfully test it with the "test connection" button.
Justin

This vault could not be loaded.

Similar Messages

Maybe you are looking for