Thousands of failed login 4625 events, corresponding with 1003 events form Security-SSP

I've got a server running Server 2012 R2, it's got a few services and such, but lately there have been thousand of failed logins, they seem to happen every 30 minutes and there is about 10 or so at a time. I checked the application logs and there seem to
be corresponding events from Security-SSP at the same times, event ID 1003,a s well as a few different ones at random times. These are the details for the 4625 events:
An account failed to log on.
Subject:
    Security ID:        SYSTEM
    Account Name:        SERVER$
    Account Domain:        MYSERVER
    Logon ID:        0x3E7
Logon Type:            3
Account For Which Logon Failed:
    Security ID:        NULL SID
    Account Name:        
    Account Domain:        
Failure Information:
    Failure Reason:        Unknown user name or bad password.
    Status:            0xC000006D
    Sub Status:        0xC0000064
Process Information:
    Caller Process ID:    0x2c4
    Caller Process Name:    C:\Windows\System32\lsass.exe
Network Information:
    Workstation Name:    SERVER
    Source Network Address:    -
    Source Port:        -
Detailed Authentication Information:
    Logon Process:        Schannel
    Authentication Package:    Kerberos
    Transited Services:    -
    Package Name (NTLM only):    -
    Key Length:        0
System
Provider
[ Name]
Microsoft-Windows-Security-Auditing
[ Guid]
{54849625-5478-4994-A5BA-3E3B0328C30D}
EventID
4625
Version
0
Level
0
Task
12544
Opcode
0
Keywords
0x8010000000000000
TimeCreated
[ SystemTime]
2014-10-08T15:39:27.023566500Z
EventRecordID
555922
Correlation
Execution
[ ProcessID]
708
[ ThreadID]
11356
Channel
Security
Computer
Server.MYSERVER.local
Security
EventData
SubjectUserSid
S-1-5-18
SubjectUserName
SERVER$
SubjectDomainName
MYSERVER
SubjectLogonId
0x3e7
TargetUserSid
S-1-0-0
TargetUserName
TargetDomainName
Status
0xc000006d
FailureReason
%%2313
SubStatus
0xc0000064
LogonType
3
LogonProcessName
Schannel
AuthenticationPackageName
Kerberos
WorkstationName
SERVER
TransmittedServices
LmPackageName
KeyLength
0
ProcessId
0x2c4
ProcessName
C:\Windows\System32\lsass.exe
IpAddress
IpPort
And the 1003 events:
System
Provider
[ Name]
Microsoft-Windows-Security-SPP
[ Guid]
{E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
[ EventSourceName]
Software Protection Platform Service
EventID
1003
[ Qualifiers]
16384
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-10-08T11:09:21.000000000Z
EventRecordID
7230
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
Application
Computer
Server.MYSERVER.local
Security
EventData
55c92734-d682-4d71-983e-d6ec3f16059f
1: e96022a1-3247-4125-9ddc-4c6068ab3bfc, 1, 1 [(0 [0x00000000, 1, 0], [(?)( 1 0x00000000)(?)( 2 0x00000000 0 0 msft:rm/algorithm/hwid/4.0 0x00000000 0)(?)(?)( 10 0x00000000 msft:rm/algorithm/flags/1.0)(?)])(1 )(2 )]
There are also a few 900, 902, 903 events. Any ideas what is happening? Everything seems to be running fine.

Hi,
The event 4625 indicates a computer account failed to logon. You could run NLTEST /SC_RESET:domain-name command with administrative credentials to check domain’s health.
For more detailed information, please see:
Audit Failure event ID 4625
https://social.technet.microsoft.com/Forums/windowsserver/en-US/ae9da10a-b4d2-4eda-ae6d-ad61b7b6ab79/audit-failure-event-id-4625?forum=winserversecurity
You could also refer to the similar threads to troubleshoot the issue:
numerous 4625 errors in the event log
https://social.technet.microsoft.com/Forums/windowsserver/en-US/c6b0d058-98d0-4572-8a72-e18e353b04fd/numerous-4625-errors-in-the-event-log?forum=winserversecurity
Many Audit Failure Event ID 4625
https://social.technet.microsoft.com/Forums/windowsserver/en-US/8f7ebcf5-2310-42c3-9b6a-20205a6c17ef/many-audit-failure-event-id-4625?forum=winserveressentials
Best Regards,
Mandy 
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Fire another event from with an event

    How best to fire an event (say a boolean value change) from within another different event (say a second boolean value change) ? I've tried having the second event assign a value to the first boolean's Value Signaling property. This does fire the first event, but its code does not seem to be executed until the end of the second event. Both events have the event's Time property wired to front panel indicators to show when they fire. The first event also has a GetTickCount wired to a front panel indicator. The second event has a sequence structure which first changes the first boolean's Value Signaling property, then Waits 1000 msec, then performs GetTickCount. I would expect the two event's GetTickCount values to be differen
    t by 1000 msec but instead they are the same. The Time value of the first event is 1000 msec less however. Why does the first event's GetTickCount not get executed until after the delay in the event which fired it ? The same behavior occurs if CreateUserEvent and GenerateUserEvent are used in a similar manner.
    Attachments:
    Fire_Event_from_Another_Event.vi ‏76 KB

    The time given by the event structure is the time the event actually was generated.
    So when you generate a user event and then wait a second until you allow that user event to actually be handled the time of the user event is not one second after. You do not change the time the event fired, you just delay when it is handled.
    The same goes for the event fired using the value property.
    MTO

  • Event Structure with Event source: This VI and Event: Mouse Up

    I downloaded an old example from 2008 on this forum and would like to duplicate it.  It uses an event structure with an event case of just Mouse Up.  Under Event Specifiers:  the Event Source is <This VI>  and Event: Mouse Up.  This works like I want in LV 2009.
    In LV 2009 if I choose for Event Source  <This VI>   under Events Mouse Up is not an option!    I tried Event Source: Pane,  and  then Event  Mouse Up is an option, but this does not trigger the event if you drag the mouse off the pane before you lift the mouse button.
    I can copy the Event Structure over to my VI  and rewire every case but that does not seem to be a good solution cuz I want this in several VIs.
    I have attached the original VI with the Event Specifier I want.  How do I get this Event Specifier in LV 2009?
    Attachments:
    Slider event control.vi ‏19 KB

    phillman wrote:
    I downloaded an old example from 2008 on this forum and would like to duplicate it.  It uses an event structure with an event case of just Mouse Up.  Under Event Specifiers:  the Event Source is <This VI>  and Event: Mouse Up.  This works like I want in LV 2009.
    In LV 2009 if I choose for Event Source  <This VI>   under Events Mouse Up is not an option!    I tried Event Source: Pane,  and  then Event  Mouse Up is an option, but this does not trigger the event if you drag the mouse off the pane before you lift the mouse button.
    So what you can do is monitor the 'Mouse Leave' event for th pane, and then start polling the mouse state.
    Technically it is correct that there is no Mouse Up event detected since the Mouse Up is not happening on th epane.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Event structure: have one event trigger another event

    I have an event structure with two events. I want the finalization of the first event to trigger the second event. Both events are triggered by a boolean value change, say "boolean 1" and "boolean 2". Can I have a local variable of boolean 2 inside event 1. By changing its value, it should trigger event 2. However, this doesn't seem to be working. (see attached example)
    any help?
    Solved!
    Go to Solution.
    Attachments:
    test.vi ‏9 KB

    Tim's reply is the answer you are looking for.
    I would like suggest that you create a sub-VI that doesw the work in the second event you want to fire so tht rather than resorting to having one event trigger another, you can simply use the sub-VI that does the work in event_2 after the sub-VI that does the work for event_1.
    If you decide to stick one event triggering another, please clearly document the sceme in BOTH events. What you want to avoid is latter deciding event_1 should be triggered by Event_2 and the next thing you know, your app hangs.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Calling Previous Event(s) in the Event Structure

    I have a an event structure with 5 events doing different function. I want to create another event which would run 3 of the previous events with one click. Can anyone help me do that?

    If you did go the route of a parallel State Machine to the Event Structure (loop), then you should consider using an Action Engine that keeps track of the current state and the past history.  The Action Engine may have enough intelligence to determine if it is appropriate to roll back and how far..
    As Andre mentionned, you do have to make sure the software is well designed in order to avoid any deadlock conditions.
    RayR

  • When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed.  The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

    When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
    The server responded with “502”
    The request for account “iCloud” failed. 
    The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
    The request for account “iCloud” failed.
    I am then given the option of staying Online or going Offline.
    Can anyone help me?
    thanks

    Hello b.krushel,
    Thank you for using Apple Support Communities
    Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
    These sections in particular:
    General Troubleshooting
    Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
    Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
    Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
    Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
    Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
    Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
    Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of  Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
    In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
    You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
    If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
    Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
    Open Calendar (or iCal).
    Open Calendar (or iCal) Preferences.
    Click Accounts. You should see an account with your iCloud member name entered.
    Turn iCloud Calendars off and back on
    Quit Calendar (or iCal).
    Choose Apple () menu > System Preferences > iCloud.
    Remove the checkmark in the checkbox next to Calendars.
    Close System Preferences and wait about a minute.
    Open System Preferences and choose iCloud.
    Replace the checkmark next to Calendars.
    Close System Preferences.
    Open Calendar (or iCal) and test to see if the issue has been resolved.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    Take care,
    Sterling

  • Network (IP) address is no longer listed as the source of multiple failed login attempts - Events 4776 in Windows 2008 R2

    Our Windows 2008R2 security log is full of failed login attempt events 4776, but we're unable to block them because no IP address is provided for the network source of these attempts - like it was in Windows 2003 Server.
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          9/26/2012 2:32:27 AM
    Event ID:      4776
    Task Category: Credential Validation
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      MAIL.XYZ.COM
    Description:
    The computer attempted to validate the credentials for an account.
    Authentication Package:    MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
    Logon Account:    admin
    Source Workstation:    MAIL
    Error Code:    0xc0000064
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
        <EventID>4776</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>14336</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8010000000000000</Keywords>
        <TimeCreated SystemTime="2012-09-26T06:32:27.570062500Z" />
        <EventRecordID>18318</EventRecordID>
        <Correlation />
        <Execution ProcessID="452" ThreadID="540" />
        <Channel>Security</Channel>
        <Computer>MAIL.XYZ.COM</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="PackageName">MICROSOFT_AUTHENTICATION_PACKAGE_V1_0</Data>
        <Data Name="TargetUserName">admin</Data>
        <Data Name="Workstation">MAIL</Data>
        <Data Name="Status">0xc0000064</Data>
      </EventData>
    </Event>

    The user names are all different in these log events, and they constantly change, which may indicate a hacking attempt.  However, in Windows 2003 these type of events looked like this, showing the IP address the request came from, so we could trace
    and block them -- but not in Windows 2008:
    Logon Failure:
    Reason: Unknown user name or bad password
    User Name: s
    Domain: MAIL
    Logon Type: 10
    Logon Process: User32 
    Authentication Package: Negotiate
    Workstation Name: MAIL
    Caller User Name: MAIL$
    Caller Domain: XXXX
    Caller Logon ID: (0x0,0x3E7)
    Caller Process ID: 3728
    Transited Services: -
    Source Network Address: 202.67.170.186
    Source Port: 57365

  • Add-on 9000005 failed with exception; Event Type: 1

    Hi Experts,
    I am woking on a project which uses DI API and creates AP Invoice by reading an excel file.
    I used all the invoice in one sap transaction.
    I read excel line by line and create one AP Invoice per line. It works when excel is having less then 500 records. But if there are more then 500 records or more then 600 records, it give following error to me
    Add-on 9000005 failed with exception; Event Type: 1
    Can anyone help me in it?
    Thanks!!
    Ritu

    Hi,
    I'm sure there is a limit to the number of rows you can add to an Invoice but I think it's probably limited on memory rather than a fixed limit on the number of rows.  This might be an out of memory error that's causing the exception.  Have you tried putting a try/catch around your code to see what the exact details are of the exception?  Also, if you are filling in any text fields on the invoice (remarks), they are limited to 30K.
    David

  • Add-on 9000035 failed with exception; Event Type: 32

    In loadscreen function i have  load the XML form but it shows the error like
    "Add-on 9000035 failed with exception; Event Type: 32"
    But  i will connect to some other db means its working .
    Share your ideas for what is the problem to load the screen in particular DB
    Thanks,
    Helen. S

    Hi,
    You may check this: Add-on 9000002 failed with exception; Event Type: 32
    Thanks,
    Gordon

  • Addon 9000000X failed with exception; Event type X

    Hi SDK experts,
    We had a problem with occurrence intermittent, something that we identified with relation on wait of response of event.
    The problem is:
    My addon need to submit XML files to some webservices. In some cases this files will be send on batches, what causes the response time to events on addon is to much large.
    In this cases, when the response time is much large, the B1 overthrow the addon.
    In compiled mode the message is not shown. This evidence was achieved on debug time.
    The error message is "Addon 90000002 failed with exception; Event type 6"
    The paleative solution was implement a thread to release the event. But threads on addons can be a problem.
    What the opinions?
    We need a solutions. Our addon is a market product for process accounting and fiscal.
    regards.
    Daniel Weissmann

    Hi,
    You may check this thread first:
    Addon Crashes
    Thanks,
    Gordon

  • Problem with failed logins for "Workstation" objects

    All
    I am currently seeing an issue in my environment since an upgrade of the
    workstation ZENworks client to 6.5.
    Basically our environment was all ZEN 3.2, over the last month we have
    been force upgrading each site to ZENworks 6.5 for clients through the
    login script. Since then we have had failed logins from various
    workstations and the only way to resolve the issue, currently, is to
    delete the workstation object and let it re-create itself which does
    resolve the issue.
    From a site perspective I am not in a position to delete 2000 workstaion
    objects so they can re-register into the tree so I was wondering if
    anyone had seen anything like this and knew how to resolve it?
    Current count on Health Monitor:
    Failed Logins Per Hour 3038 6096 N/A
    Example Error:
    Time: Monday, 27-11-2006 9:18 am
    Address: IP 165.198.211.58
    User: .CN=PUKWUL01523.OU=WKSTS.OU=THEALE.OU=UK.O=FLE.T=F LE-NDS.
    I was thinking it may be a rights issues of some sort but any help
    greatly received!!!!!
    Paul

    > OK, we have tried that and it didnt work unfortunatly, we have also added
    > public rights to the workstation container to see if it was a rights
    > issue of some sort but again this didnt work.
    >
    > Paul
    I did see this issue a while ago when moving from 3.2 to 6.5
    What I might suggest is trying to force the upgraded PCs to create "new"
    workstation objects.
    As part of the upgrade process, unregister the Workstation Objects 1st,
    then run the agent install. Have the ZFD7 Import policy create the
    workstation Objects with a slight different name or in a slightly different
    location.
    I dont recall the details exactly so I wont say too much since I will not
    have the facts 100% correctly, but it was an issue in which the old
    workstation objects would lose the ability to authenticate after a few days
    because of a switch in the WS Manager.
    By having new objects made, the issue would be avoided.
    The old ones should go aways shortly due to automatic workstation cleanup.

  • Error event id 2 - Kernel Event Tracing - Session "" failed to start with the following error: 0xC000000D

    I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
    Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
    Source:        Microsoft-Windows-Kernel-EventTracing
    Date:          24/12/2009 09:08:20
    Event ID:      2
    Task Category: Session
    Level:         Error
    Keywords:      Session
    User:          SYSTEM
    Computer:      George-XXL
    Description:
    Session "" failed to start with the following error: 0xC000000D
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
        <EventID>2</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>2</Task>
        <Opcode>12</Opcode>
        <Keywords>0x8000000000000010</Keywords>
        <TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
        <EventRecordID>36</EventRecordID>
        <Correlation />
        <Execution ProcessID="1944" ThreadID="1948" />
        <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
        <Computer>George-XXL</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="SessionName">
        </Data>
        <Data Name="FileName">
        </Data>
        <Data Name="ErrorCode">3221225485</Data>
        <Data Name="LoggingMode">5</Data>
      </EventData>
    </Event>

    Can you let us know if you get any Blue Screen crush error while using your comptuer?
    Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
    You can try the the following steps:
    1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
    2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
    3. Click the "Startup" tab, click "Disable All" and click "OK".
    Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
    Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
    KB929135.
    Good luck!
    John
    This is a very poor answer.  This guy doesn't know what he's talking about because if you tell someone its ok to  "safely ignore the errors in the event log"  as a blanket instruction ESPECIALLY because as he stated so himself
    he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
    It should be decided on a case by case situation.
    Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
    I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
    to do with kernel event tracing.
    Of course, it's just my opinion....I could be wrong!

  • Add-On [X] failed with exception; Event Type:16

    Hi,
      I'm currently trying to create a SAP B1 Add-On using C# (Framework 3.5/VS 2008).  I've done several VB.Net Add-Ons in the past but this is the first one I try to create one in C#.
      Using the SDK code examples, I've managed to create an Add-On that correctly connects to UI and DI (I can create a sub-menu, set event filters and add some usertables and userfields).  My sub-menu opens an XML based form in SAP B1.  The first time I click on the sub-menu, my form is correctly shown.  But immediately after, I get the following error in the message bar at the bottom :
      Add-On [X] failed with exception; Event Type:16, in which [X] is a number (like 90003), incrementing each time I stop the Add-On in Visual Studio and restart it.
      After this message occurs, I cannot display another instance of the window using the sub-menu.  In fact, it seems that all Add-On activity (button click, event trapping) is disabled or ineffective.  The Add-On still is running in the process tree, but no response.  Only the "X" is working on the created form to close it.
      I've run some tests on the code and I realized that this is happening on XML based forms (using the LoadBatchActions command to load the form) and the FormCreationParams class to create a simple form.  If I put the form creation line code in comments, my Add-On still runs (I can trap events on the sub-menu click) ; I can click multiple times on the menu without a problem  But as soon as I create a form, it stops responding.
    It also seems that as soon as I click on another menu to open a system form, the same error occurs. If I comment the form creation line code, again I can click as often as I want without getting this error message
      Can anyone help me on this one ?  I can post some code depending of what you may need to check this.
      Thanks !

    Sorry, I've just found the problem ; it was caused by an unhanded exception !
    Thanks !

  • RDP session fails with TermDD event id 56

    I have a Wyse R10L thin client and I have configured the thin client with Static IP address,
    I have a Windows Server 2008 R2 host system configured with FTE (Fault Tolerance Ethernet) network,  and I have transition network Redundant link protector
    SBFTF1010-130,
    The SBFTF1010-130 is connected in-between the CISCO switch and thin client. The network connections are made like the FTE primary to Port#2 and secondary to Port#3 of RLP (redundant Link Protector).
    Connected a normal CAT5 cable to Port#1 of RLP to thin client and established the RDP session of 2008 R2, and started working on the RDP session and removed a Port#2 cable and checked the LED status on the RLP. It switched to Primary to Backup network but
    the RDP session got terminated which is not expected result.
    When I check event log, it created an entry with event log “Event ID=56 The terminal server security layer detected an error in the protocol stream and has disconnected the client.”
    Can you please help?
    Regards
    B.Akbar
    B.Akbar

    Thanks Jeremy for looking this issue.
    Before posting this issue i have tried the link suggested by you and many people and it is not actually fixing my issue.
    The details in event log says,
    Log Name : System
    Source: TermDD
    Event ID:56
    Level: Error
    Binary data:
    In Words
    0000: 00040000 002C0002 00000000 C00A0038 
    0008: 00000000 C00A0038 00000000 00000000 
    0010: 00000000 00000000 D00000B5  
    In Bytes
    0000: 00 00 04 00 02 00 2C 00   ......,.
    0008: 00 00 00 00 38 00 0A C0   ....8..À
    0010: 00 00 00 00 38 00 0A C0   ....8..À
    0018: 00 00 00 00 00 00 00 00   ........
    0020: 00 00 00 00 00 00 00 00   ........
    0028: B5 00 00 D0               µ..Ð
    I have tried updating so many Group Policy and Local Security changes but nothing helps to resolve the issue. Even i could reproduce this issue without the thin client and RLP hardware.
    To reproduce the issue we need two systems configured with FTE on same network and RDP one system from other system. Once login to the RDP host system open a Ping window and ping anyone of the IP address continuously, pullout the Primary link of the network
    cable from the system which you are using for RDP and check the ping continuous or not.The ping stops when you pullout the primary link of the network cable.
    So i think this is not a specific product issue rather it is a common bug in Microsoft OS.
    Please help me to address this issue as we are using wide range of thin client with RLP in our virtualization projects.
    Regards,
    B.Akbar
    B.Akbar

  • Help with my Ipad's Apple ID failed login!

    Help, my Apple ID on my ipad has been disabled.  I have not had failed logins.  It just popped up.  my husband has the same issue on his Ipad as well.

    You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your iPad by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it (and similarly for your husband on his iPad).
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Maybe you are looking for