Through code, text value is not reflecting on pdf document

Hi,
Overview of issue.
I layed few textbox(annotaion) on pdf and through .net code i am trying to update the value but it is not reflecting on pdf document.
code as below
Acrobat.AcroApp AcrApp = new Acrobat.AcroApp();
Acrobat.AcroAVDoc AcrAvDoc = AcrApp.GetActiveDoc() as AcroAVDoc;
Acrobat.AcroAVPageView AcrAvPv = AcrAvDoc.GetAVPageView() as AcroAVPageView;
AcroPDPage AcrPdP = AcrAvPv.GetPage() as AcroPDPage;
AcroPDAnnot AcrPdAnnot = AcrPdP.GetAnnot(0) as AcroPDAnnot;
AcroPDAnnot AcrPdAnnot = AcrPdP.GetAnnot(0) as AcroPDAnnot;
pdannot.SetContents("hello" + i);
pdannot.Perform(Avdoc)

Last two line corrected.
Acrobat.AcroApp AcrApp = new Acrobat.AcroApp();
Acrobat.AcroAVDoc AcrAvDoc = AcrApp.GetActiveDoc() as AcroAVDoc;
Acrobat.AcroAVPageView AcrAvPv = AcrAvDoc.GetAVPageView() as AcroAVPageView;
AcroPDPage AcrPdP = AcrAvPv.GetPage() as AcroPDPage;
AcroPDAnnot AcrPdAnnot = AcrPdP.GetAnnot(0) as AcroPDAnnot;
AcrPdAnnot .SetContents("hello" + i);
AcrPdAnnot .Perform(Avdoc)

Similar Messages

Updated (VORowImpl ) values are not reflected in inline POPUP table

Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
Thanks

Thanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM

Ship to party and Bill to party not reflecting in marketing documents

Hi,
Ship to party and Bill to party not reflecting in marketing documents inspite of defining it in BP Master data.why does it happen.we are on 8.8 version and this is happening in Livedatabase.
Thanks,
Mansoor Baig

Hi Mansoor,
Is this for new transactions or existing ones that went thru the 8.8 upgrade? Is this for new BP that the address doesn't show or existing (if you have other transactions with no address problem then it shouldn't be the address format setup unless something happened in the upgrade).
Heather

How to add text and objects (arrows) over a PDF document?

I am only familiar with Adobe Reader. Looking for the least expensive Adobe product that would allow me to add text and arrows over an existing PDF document. Not looking to edit (change) document other than add a "layer" over the original. Basic stuff I'm sure. Thanks for your help.

If you say so But I read the Original Comments and it doesn't sound like adding comments. When you adding layers as he is describing That is adding content.
"Not looking to edit (change) document other than add a 'layer' over the original."
But if you say Commenting then I suppose you are all correct.

Acrobat Professional 7.0 not able to PDF documents

Acrobat Professional 7.0 was working fine, then I got a message to update to Acrobat 7.1. I clicked yes, it installed, I restarted, and now I can't PDF documents anymore.
The document opens a pop-up, "Missing PDFMaker files. Do you want to run the installer in repair mode?" immediately after I save the to-be-pdf'ed document. When I click "yes", It slowly runs the repair mode, then the computer shuts down and restarts. I go to PDF again, and I get the same "Missing PDFMaker files". I don't know what to do about this.

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:14:25 -0700
From: [email protected]
To: [email protected]
Subject: Re: Acrobat Professional 7.0 not able to PDF documents
Yes! Thank you. I played around with it some and found that is the case, that I can PDF through the printer as well as bring the application up. I suppose it's just not install-able in full because it just cannot link up with Windows 7 in any capacity.
That's all the ability that I need at the present time. Nothing special, just whether it can or can't. Thanks!
>

Error message 'not a valid PDF document'

Hi folks,
my Z10 has trouble opening some PDF documents sent as email attachment. When I try to open them the error message appears:
Important message
The document cannot be opened because it is not a valid PDF document
There is no BES10 Service involved in my environment. Mails are synced with with active sync.
OS Version: 10.2.0.429
Any suggestion appreciated.
Best regards,
RAUMPATROUILLE

Stuffit is the only app I know of which can decompress its own format. Your Windows clients must use the free Expander to open them. Otherwise, use OS X's built in zip compression and they'll be able to open the files without the need of third party software. Right click on any item, or group of items and choose, "Compress xxx Items" (how it will read if more than one item is chosen).

This document cannot be opened as it is not a valid PDF document

I am trying to get my Amex statement from Amex on my tablet. I have Adobe reader for Andriod and Pdf to Go. Each time I download and tray to read the document I get this error. Other Pdf files I have downloaded open OK.

I GOT PROBLEMS TOO...got this error when trying open the pdf files in android devices "The document cannot be opened because it is not a valid PDF document" ..im using samsung s4..i tried open the same files at windows pc and its can be open fine,the files not contain any passwod btw..seem some files cannot be open at android is this normal or what? got solution of tht?or i just search another pdf viewer?
example of files : http://www.mediafire.com/download/raz3x0bk1mvnni4/Lawak+Kampus+01%40ih azaliza.blogspot.com.pdf
this the screenshot

A hyperlink click to a pdf document in a website does not open a pdf document instead presents a blank page "searching for bookmarks"

a hyperlink click to a pdf document in a website does not open a pdf document instead presents a blank page "searching for bookmarks"

Check the settings as shown in the [[opening PDF files within Firefox]] article.

Acrobat X and XI will not print many pdf documents.

Acrobat X and XI will not print many pdf documents. When I click Print, the document fades and I get a dialog box that says "Adobe Acrobat has Stopped Working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I was experiencing this with Acrobat X so I upgraded to XI, but the problem is exactly the same. I am using Windows 7 Professional operating system.

Thank you for your reply. I have several printers available on our network,
the program doesn't even go as far as allowing me to select a printer. I am
trying to print to an HP 1320n or a LANIER MP C5502 PCL 6. I have changed
the default printer, but the result is still the same. In does the same
thing with Adobe (Standard XI) PDF set as the default printer.
Stan Reznicek
WinWholesale
3110 Kettering Blvd
Dayton, OH 45439
937-294-4249
[email protected]

I have payed for Adobe acrobat pro but now i can not convert a pdf document to a word format, why?

I have payed for Adobe acrobat pro for one year and it is valid to november 2015, but now i can not convert a pdf document to a word format, why ?

Hi m_karhulinna,
If you have Acrobat Pro, you can save directly to Word format from within Acrobat by choosing File > Save as Other > Microsoft Word > Word Document.
(It sounds like you may be trying to use the ExportPDF online service, which is separate from Acrobat, and not necessary in your case.)
Best,
Sara

I can not open some pdf documents from goverment websites

i can not open some pdf documents from goverment websites

the operating OS X, browser-I tried diferrent browsers safari, chrome, firefox, i have adobe reader 11.0.06
so when i try to open a pdf file, it is said "you need a later version of PDF viewer", so i do not know what is the problem

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
Which one do you have?

Purchase Order values are not reflecting in MIGO

Dear Experts,
I have changed standared Pricing Procedure from TAXINN to TAXINT because excise calculation was wrong. Now I have assinged new pricing procedure & reflecting in Purchase order & working as per requirement also.But when we are doing MIGO, excise values are not automatically coming in MIGO. So Is there any configuration or missing copy control because i have changed pricing procedure?
Also I want to put a check, if purchase order value is not matching with vendor invoice value then stores person can't do the MIGO.
Could any body guide me?
Thanks
Trupti

Hi,
It is not like that you have to mandatory use the TAXINN rather it is recommended by SAP to use but if some business requirement doesnu2019t meet up with what is recommended that its business call to go TAXINJ from TAXINN, but right now we don't know at what circumstances they moved to TAXINJ but question is what are the settings missing while moving from TAXINN to TAXINJ and because of that system is not picking the Tax Values at the time of MIGO in excise capture & posting.
So I have several questions in mind in order to understand your system behaviour.
1) Are you using the correct Tax code at PO level?
2) If using the correct Tax code then is't correct value maintained in FTXP for the Tax code used in PO.
3) If correct Value maintained in Tax code then by clicking on Taxes button mentioned under PO item level details are you able to see the correct value against each applicable condition type in next screen by clicking over Taxes button in PO?
4) if not then first check J1id - Material Chapter Id combination, vendor excise indicator mentioned, correct duties maintained in excise duty so check all master data related to CIN maintained in J1id
So first give answer to above mentioned questions then we procees further but I am sure I can make your system to picked the correct duties don't worry Just answer my questions hope things become fine in your system.
Best Regards,
Silky
Note: Please assign valuable points in order to encourage contributors to each answer to queries...

Text value is not getting displayed in Query designer !!

Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Expected values are not reflecting in the BW

Dear Experts,
My Infocube or Report is not reflecting exact values as in source system. Can any one provide possible reasons.
Thanks & Regards,
Raj

Hi Raj
Can u expalain which report and cube ur looking for and what data u need to compare.
if ur using R/3 as a source go to RSA3 and check the data what ur extractor is giving to BIW.
Regards
Shashi

Through code, text value is not reflecting on pdf document

Similar Messages

Maybe you are looking for