Tick Mark in Checkbox - Adobe Form

Hello All,
Please can anybody suggest me how to change the 'X' symbol in checkbox to tickmark in Adobe form.
Thanks a lot in advance!
Regds,
Sushmitha

Hi Sushmitha,
Define variable in Interface and populate the value based on condition and bind it with the element type checkbox in the layout.
Note: Check for on/off values should be the values you populate in form interface for the varaible in binding tab of the Object element in layout.
Regards,
Raju.

Similar Messages

Tick mark shows as '4' in Windows XP Embedded

Hi,
The tick mark in checkbox (xfa form) displays as "4" in Windows XP Embedded. Kindly help

Hi,
you sample looks fine and I don't have any problem on my system.
All boxes show the mark as expected.
I found a description in the XFA specs about the marks, which let me think that it is your Reader that causes the effect.
These descriptions are deliberately vague to allow latitude for the application. For example when
presenting on glass the filled circle might appear as a glowing light whereas when presenting on paper it
would probably appear as a flat black circle taken from a font.
http://partners.adobe.com/public/developer/en/xml/xfa_spec_3_3.pdf#page=651

How to put water mark in web dynpro abap Adobe forms

Hi
Can any body tell me how to put water mark in web dynpro Abap adobe forms ,
actually I need to print water mark as back ground in gray color.
Points will be rewarded of Helpful answer..!
Regards,
Sidram

Hi,
for more information about layout options in forms, go to your form in transaction SFP, layout view and choose Help -> Adobe LifeCycle Designer Help. There you find information on page layout, e.g. " Objects can be placed anywhere on a master page, inside or outside the content area. As a general rule, do not place objects inside the content area unless your intention is to have other objects laid down on top of the master page objects when the form is rendered. If you are setting up a watermark, place it inside the content area. "
Besides, there's an Adobe forum where you might get more information for such Adobe questions.
Regards, Heidi

Problem with adobe forms multiple pages

Hi
can someone help me how to get multiple pages in adobe forms in case the item lines exceeds the page capacity?
Thanks

It should not be much of a problem. Here is a detailed solution to your problem:
In your context , create a node MasterNode of cardinality 1...1 and singleton set to true. Bind this to the dataSource property of the InteractiveFormElement.
Inside this MasterNode create a node Data of cardinality 0...n and singleton set to false. Keep all of your payslip attributes inside this node.
In your interactive form element , in the Body Page create a subform of Type Flow Content and Flow Direction Table .Check the chechbox for Allow Page Breaks within Context . Inside this subform create another subform of Type Flow Content and Flow Direction Western Text . Uncheck the checkbox for Allow Page Breaks within Context . Put all of your pay slip UI elements inside this subform and bind them with the attributes under the node Data. Also tick the property of the inner subform under the section Object->Subform that says Repeat Subform for each Data Item
In your view controller coding area , create an element of the node Data for each employee record and populate it with values for the particular employee .
Add all of the elements that you created into an ArrayList and bind this ArrayList to the node Data. Now your form is ready for n number of employees.
Put this sort of coding in your view controller coding:
IDataElement objData = null;
ArrayList arlData = null;
int intNumberOfEmployees=0;
try
        arlData = new ArrayList();
        intNumberOfEmployees = //Get size of your model node that returns employee info
        if(intNumberOfEmployees>0)
                for(int i=0;i<intNumberOfEmployees;i++)
                        objData = wdContext.createDataElement();
                        objData.setName("//Value fetched from backend here");//Eg:wdContext.nodeEmployeeInfo.getEmployeeInfoElementAt(i).getname()
                        //Similarly set all of the values
                        arlData.add(objData);
        wdContext.nodeData.bind(arlData);
Hope this helps you...

Reducing the Text height in Adobe Forms

I have a text field which I have included for the long text of me22n transaction in the context node of Adobe forms. In the form I want to adjust the maximum height of the text field using java script or any other way, as in I do not want to print the text if it exists for more than 3 lines?

You need to implement a "flowed" design. the concept of flowed means that your field/subform/form expands as your data grows.
To do this, inserrt a subform and mark it as flowed (Top to Bottom), then drop in a text box and bind it to your input field.
In your text box's properties, make sure you allow Multiple Lines, and in your Layout pallette make sure Expand to Fit checkboxes are checked.
your field will grow or shrink depending on your input data.
EDIT: if you want to hide your field, you need to use formcalc or javascript. you need to check some value (whatever that is, is up to you) then hide your field.
if (BUSINESS_UNIT eq "G/A" ) then
COMM_DLY_COSTS.presence = "hidden"
endif
Edited by: Robert Phelan on Aug 25, 2011 5:25 PM
Edited by: Robert Phelan on Aug 25, 2011 5:27 PM

How can we add a checkbox in form (Scripts)

Hello Experts,
i want to add a checkbox in the form. how can v add a check box in the form. i tried with sap scripts symbols like sym_checkbox but it's not working.
and i can print a small box by using Box statement. but i need exactly a check box. how can v create it in scripts.
thanks in advance.

Hi,
Please refer the links,
Check Box With Tick Mark on Sap Script
putting tick mark into check box in smartform
Regards,
Hema.
Reward points if it is useful.

PHOTO IS NOT GETTING REFLECTED IN ADOBE FORM

Hi experts
We have tried the below code to dispaly photo in webdynpro integrated with adobe forms
CALL FUNCTION 'HR_IMAGE_EXISTS'
    EXPORTING
      p_pernr                     = v_obj_id
*     P_TCLAS                     = 'A'
*     P_BEGDA                     = '18000101'
*     P_ENDDA                     = '99991231'
    IMPORTING
*     P_EXISTS                    =
      p_connect_info              = l_connect_info
    EXCEPTIONS
      error_connectiontable       = 1
      OTHERS                      = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'SCMS_DOC_READ'
    EXPORTING
*     MANDT                       = SY-MANDT
      stor_cat                    = space
      crep_id                     = l_connect_info-archiv_id
      doc_id                      = l_connect_info-arc_doc_id
*     PHIO_ID                     =
*     SIGNATURE                   = 'X'
*     SECURITY                    = ' '
*     NO_CACHE                    = ' '
*     RAW_MODE                    = ' '
*   IMPORTING
*     FROM_CACHE                  =
*     CREA_TIME                   =
*     CREA_DATE                   =
*     CHNG_TIME                   =
*     CHNG_DATE                   =
*     STATUS                      =
*     DOC_PROT                    =
    TABLES
      access_info                 = lt_infos
*     CONTENT_TXT                 =
      content_bin                 = lt_image_bin
    EXCEPTIONS
      bad_storage_type            = 1
      bad_request                 = 2
      unauthorized                = 3
      comp_not_found              = 4
      not_found                   = 5
      forbidden                   = 6
      conflict                    = 7
      internal_server_error       = 8
      error_http                  = 9
      error_signature             = 10
      error_config                = 11
      error_format                = 12
      error_parameter             = 13
      error                       = 14
      OTHERS                      = 15.
CHECK sy-subrc = 0.
READ TABLE lt_infos INDEX 1 ASSIGNING <fs_info>.
CHECK sy-subrc = 0.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
    EXPORTING
      input_length = <fs_info>-comp_size
      first_line   = <fs_info>-first_line
      last_line    = <fs_info>-last_line
    IMPORTING
      buffer       = l_employee_photo_content
    TABLES
      binary_tab   = lt_image_bin
    EXCEPTIONS
      failed       = 1
      OTHERS       = 2.
but the photo is not getting reflected in the adobe forms .
and also i have tried the url method but it doesnt work .
please help me out .

First, have you set a breakpoint in this code and made sure that you are getting data into lt_image_bin? That would seem to be the first place to start.
Then the question is how are you trying to pass the image into the Adobe Form? Are you passing an XSTRING context attribute into the form interface? Have you marked that part of the interface as an image? Are you setting the MIME Type parameter of the form interface as well. You really haven't posted any details about what you are doing on the Adobe Form side.

Adobe Form... Is there a way to use a drop down menu to highlight or note other fields...

I am working on a simple Adobe form. I am currently trying to figure out if there is a way to use the answers of a drop down menu to either mark, note or highlight 14 other fields. There are 9 possibilities in the drop down menu, include a blank and NONE.
For example if the drop down menu is set to 1, then field 9, 10 and 14 are marked, noted or highlighted.
Is this possible with a script?
Thank you in advance for any help!

Have you looked at the properties that are available to form fields. I would look at setting the fill color or border color for a form field. Either of these can be done with Acrobat JavaScript.

Adobe form from webdynpro : Getting a single row in the table

Hello,
I have a scenario in which I have to create a adobeform from webdynpro application.
I have created the form and have the context designed in place.
I am facing a problem in the table I have in my adobeform.
I am adding rows to this table dynamically using a button using "addInstance"
Now on the webdynpro side , when I try to read this table I get a single row from this table.
This row is always the first row of that table.
I checked the following things from blog   /people/juergen.hauser2/blog/2006/09/12/avoiding-common-mistakes-when-using-tables-on-sap-interactive-forms , i.e. :
Cardinality of the node.
Tick on the option "Repeat Row for Each Data Item".
But still no success.
With deadlines to catch I had to post this question after trying a lot.Please help.

Hello Otto,
I had found this link before and used the same solution , but unfortunately is taking a long time.
Now what I am doing is :
1. I append 10 rows into the table then bind it to the node
2. Then on the adobe form I have removed the check on "Add row for each line item" because of which it shows only 1 row
     on the form.
     Now I add rows dynamically, but this puts a limit on the number of rows can be added to the table i.e. 10.
But this again has added problems like while displaying the form or modifying I hav to handle it seperately and cannot use the same form as it is.( as I have removed the tick for "Add row for each line item" ).
Thanks,
Omkar Mirvankar

How do I get my XDP form in the SharePoint 2010 Adobe Form library?

I was able to get the Adobe LiveCycle samples for SharePoint to work. For some reason, I can't get my XDP forms to show up in the selection dropdown in the Adobe Form Library on SharePoint using the Adobe LiveCycle SharePoint connector for SharePoint 2010.
Is there a trick that you have to do to the form to make it available. The only difference that I noticed was the sample forms used a guide.
We are using Adobe LiveCycle Designer ES3 and we have Adobe LiveCycle server ES4. We are using SharePoint 2010.
Any assistance would be appreciated.
Thanks,
Joe

I got this problem solved.
Solution:
Create new Adobe Livecyle form
Have an xsd created for the schema of what is going to be in the form
Import that data model when creating the form
Right-click on xsd data connection in form. Click Connection Properties.
Click Next.
Click the checkbox "Embed XML Schema" (This is what I was missing).
Click Finish.
That's it to make the form show up in the SharePoint Adobe Form Library.

Form size increases when ADOBE Form moved from DEV to QA

Hi Gurus,
I have a large PDF ADOBE Form developed in DEV but when I moved this Form to QA environment, I noticed the file size has been Doubled(from 2MB to 4MB). Please note that, this is not an interative Form. Can someone tell me why and how can I fix it. We are emailing this form and 4MB is too large.
Thanks for your help,
Cyrus
Edited by: Cyrus Arjomandi on Nov 2, 2010 8:48 PM

Well, after discussing it with SAP, we are still in the dark and don't know why this problem only occurs to one of our PDF outputs. however, the following might help you to cut some times looking for answers.
1-It started after we changed the values in the Layout properties. We are not sure in which tab. We guess it was "PREVIEW"
2-After this, every time we made any changes to the Layout, the size was doubled until it became a major problem
3-We contacted SAP for this issue and the respond was "Please refer to following note for installation/patches:
1176858 / 1356871"
4-We were also asked by ADOBE to download a zip file called "COMMON.zip" and install the COMMON file on our ADS server
5-After installing the COMMON file on our server we were asked to run the ABAP program "FP_CHK_REPORT" on the FORM.
6-The suggestion was to only check mark only common-001when running the ABAP, but we check marked all after found no results with only COMMON-001.
7- check out this link. http://help.sap.com/saphelp_nw70/helpdata/en/44/35f874b9d74901e10000000a1553f7/content.htm
8-we did all of the above but we had partial success, it reduced the size fro 7MB to 4MB
9-Finally, we created the same Form from ground up without touching the Layout properties and the size turned up to be around 100KB.
Cyrus Arjomandi
GETSAP at gmail
ABAP Consultant specialized in technical ABAP in "SRM, ADOBE Forms, ECC logistics"
Edited by: Cyrus Arjomandi on Dec 23, 2010 8:53 PM

ADOBE FORMS using Webservice

Hi Experts,
I have a problem with Adobe Forms Using webservice. I created RFC where it saves data from Adobe Forms to a customized table and exposed it as webservice. From the SOA manager, I copied the generated link pasted in the dataconnection in Adobe Lifecycle designer, but whenever I generate the form I keep receiving this error:
"http:// erpwrk1.corp.com:8000/sap/bc/srt/wsdl/bndg_DFA46DE60CFOD33F19F21005056C00008/wsdl11/allinone/ws_policy/document?sap-client=001". Check that the path is correct and that the file is a valid wsdl file.
I already activated services from SICF in relation SOAP runtime. What could be the cause of the problem and how to fix the problem?
Thanks A Lot!
Mae

Hi Ma. Angelica A. Estacio,
From the SOA manager, I copied the generated link pasted in the dataconnection in Adobe Lifecycle designer, but whenever I generate the form I keep receiving this error: Check that the path is correct and that the file is a valid wsdl file and hence i cannot finish the data connection wizard.
From the above posts, it looks like you have resolved the issue. But can you please let me know how did you resolve it ?
Did you check any SAP transaction to find the above mentioned checkbox?
Please revert as this has become critical now.
You can mail me your response on [email protected]
Regards,
Rohit Gugale

Problem with new page triggering in ADOBE Forms

Hi all,
             I am workin on a Purchase Order adobe form. I have a requirement to dispay Other stipulation text after completion of all the information. The text should be displayed on a fresh new page. I can able to display the text on new page, but if the text is not there then its displaying a blank page. How to avoid this blank page.
Can anybody please help to solve this issue
                      Thanks.
                      Ranganadh.

It is because you are calling a NEW-PAGE in the main window and you have not mentioned which should be the next page. For that you need to Go to SE71==> Pages==>Standard Attributes==> Mention the <b>Next page</b>
Assign the same for both the pages !
rgds,
TM
Please mark points if you got solution.
Message was edited by: Thomas Mann

Standard Text IN ADOBE Forms

Hi,
Can you tell me how to use standard text in ADOBE forms,
and how to fetch A Customs Tariff Number or an HTS (Harmonized Tariff System)
from other system.

Hi Oliver,
I believe you standard text is a table type of TDLINES.
On the form you would display it with a table of 1 column 1 row with repeat row ticked.
Have the like below code on the fomr ready event of your table.
for(var i =0; i<this.Row1.nodes.length;i++)
     if(i == 1){
     this.Row1.Cell1.font.fill.color.value = "255,0,0";
     this.Row1.xx.font.fill.color.value = "255,0,0";
Note: in my example I had a table with one row names Row1 and 2 fields cell1 type textbox, & xx as text / label.
If its like you have it in a text box with multiple entries, we need to spli the value such that 1st row is displayed in a text box whose parameters are by defeult set to font red, and rest of them to this text area.
If your procedure is table the code sud work, else let me know how you get data and how do you display it on the screen.
Cheers,
Sai

Can I color a line of "standard text" in adobe forms output?

Simple question: Can I color a line of "standard text" in adobe forms output?
My standard text (SO10) has multiple lines.
Can I make one of the lines red?
Ollie

Hi Oliver,
I believe you standard text is a table type of TDLINES.
On the form you would display it with a table of 1 column 1 row with repeat row ticked.
Have the like below code on the fomr ready event of your table.
for(var i =0; i<this.Row1.nodes.length;i++)
     if(i == 1){
     this.Row1.Cell1.font.fill.color.value = "255,0,0";
     this.Row1.xx.font.fill.color.value = "255,0,0";
Note: in my example I had a table with one row names Row1 and 2 fields cell1 type textbox, & xx as text / label.
If its like you have it in a text box with multiple entries, we need to spli the value such that 1st row is displayed in a text box whose parameters are by defeult set to font red, and rest of them to this text area.
If your procedure is table the code sud work, else let me know how you get data and how do you display it on the screen.
Cheers,
Sai

Tick Mark in Checkbox - Adobe Form

Similar Messages

Maybe you are looking for