Tickle your JSF:Data lost with several clicks

Hi All,
I have a simple form <f:view>
     <h:form>
       <h:inputText id="name" value="#{experiment.name}"/>
       <h:commandButton value="submit"  action="#{experiment.vanishMethod}"/>
     </h:form>And in the page bean method i just do this:
public String vanishMethod(){
          System.out.println("****step-in*****");
          try {
               Thread.sleep(1000);
          } catch (InterruptedException e) {
               e.printStackTrace();
          return "success";
     }In my result page i want to display the name:
<h:form>
    Hi how are you!!
   <h:outputText id="out1" value="#{experiment.name}" />
    </h:form>When i try to click on the submit button several times then i lose the name in out and only get this:
Hi how are you!!
Why is my name data getting lost.
I am using RAD 6.0.1 and Websphere Portal Server.
Best Regards,
Pallavi

To elaborate on my answer above, I don't understand your concern. If you have just 1 yr left on your double your data 4 GB plan, then there was no "loophole" to keep your unlimited data when you renewed your contract.
Anyone was able to keep unlimited data when upgrading with a subsidized phone up until late June of 2012. A year ago would put your upgrade at April of 2012 and there were no restrictions on keeping unlimited data at that time.
You are obviously not relaying the "whole" story, but that is not unusual for someone who would like to get out of a contract without paying the ETF.
You either did not have unlimited data to begin with, or you chose to go with the "double your data 4 GB" plan on  your own. There was no reason you needed to give up your unlimited data, if you actually had it, when you upgraded.
There must be some other factors involved, such as wanting to save a few bucks by purchasing from a retailer other than Verizon and you are now regretting your decision.

Similar Messages

  • Data lost after several days running!

    data lost after several days running
    ENV:
    Service Pack 1 for Crystal Reports for Eclipse 2.0
    Tomcat5.5
    Problem:
    There is no problem to export the report as PDF files in the first few days after i upgraded the CR4E.
    But after several days running,the problem appeared : the exported PDF file was incomplete!
    It's supposed to 3 pages,but only 1 page(the first page) exported actually.
    When i restarted the tomcat,the problem disappeared.In several days running,
    the problem appeared again...
    Code:
    reportClientDoc = new ReportClientDocument();
    reportClientDoc.open(Messages.getString("tmpltPath")+tmplt_name, OpenReportOptions._discardSavedData);     
    RptHelp  rptHelp = new RptHelp();
    rptHelp.setDatabaseCtrl(reportClientDoc);
    rptHelp.addDiscreteParameterValue(reportClientDoc,"","userName","admin");
    rptHelp.addDiscreteParameterValue(reportClientDoc,"","start_date",start_date);
    rptHelp.addDiscreteParameterValue(reportClientDoc,"","end_date",end_date);
    for(int i=0;i<6;i++){
         if(!p_name<i>.equals("")){
              rptHelp.addDiscreteParameterValue(reportClientDoc,"",p_name<i>,p_value<i>);
    String exportPath = Messages.getString("reportExportPath");
    String exportName = "test";
    rptHelp.export(reportClientDoc, exportPath+exportName, file_extention);
    File file = new File(exportPathexportName"."+file_extention);
    FileInputStream in = new FileInputStream(file);
    int len = (int)file.length();
    byte[] data = new byte[len];
    int read = 0;
    while (read <len) {
        read += in.read(data, read, len-read);
    in.close();
    response.setContentType("application/x-msdownload");
    response.setHeader("Content-Disposition", "attachment; filename="+ URLEncoder.encode(exportName"."file_extention,"ISO-8859-1"));
    OutputStream ops = response.getOutputStream();
    ops.write(data);
    ops.flush();
    ops.close();
    out.clear();
    out = pageContext.pushBody();

    What is the data? What is displaying the data (graph or chart)? What does your code look like? Why did you post a 4M image to the forum?
    NaN in the data will appear as gaps in plots.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Data lost with 3.1 update

    I dutifully downloaded 3.1 and had done a software update which updated iTunes to 9 on my MBP 2.5GHz/250GB-5400/4GB 667DDR2 RAM. When I synced my 32GB 3GS iPhone, ALL of my apps were deleted from the iPhone, then all 96 of them were reinstalled, including a bunch I had taken off the iPhone, and reinstalled the in ALPHABETICAL ORDER (who in the heck installs their apps alphabetically?)! Worse, I am "New user" on all my apps, all my lists are gone from my list apps, dates gone from countdown and calendar apps, word lists from dictionaries, maps I had downloaded from Topo Maps, scores for all my games are gone!....AGHHH! I was at work a few days ago, I went to look up a drug interaction on Epocrates, they had never heard of me, and requested that create a new account etc. Sorrrrryyyy I am just a litttttle too busy right now! So I looked it up the old-fashioned way. iTunes 9 does make it infinitely easier to rearrange the apps, so I worked that problem out pretty easily, thanks to the new iTunes.
    Does anyone know what happened? Am I a victim of the "5th finger" phenomenon, where you inadvertently hit a key with your little finger and all of a sudden weird things start happening? Did I miss a really important alert box that warned me that my digital life was about to change? Right now American Heritage Dictionary 4th ED is downloading, which takes over an hour on my DSL, but I already have it. AND there is an alert that I have an app to update, and it's the AH Dictionary! But when I click on the icon, it says I purchased it but haven't downloaded it, go the the iTunes store and click on available downloads--but I HAVE downloaded it, and it is downloading again.
    Fortunately, I have not suffered the fate of many as witnessed on the Apple Support Discussions or MacWorld forum, but I am curious if anyone else has had my experience? I am perfectly willing to admit that I may have missed an alert box, but I don't know if that is what happened, of if it was 5th finger episode, or what.
    Thanks. Any input/feedback is appreciated.

    Wow this sounds suspiciously like you didn't restore from a backup.

  • Do your MP3s play back with digital clicks and distortion on new iPad?

    I have thousands of MP3s encoded to 192 in my iTunes library that have played flawlessly on my iPods, iPhone, first-gen iPad and Macs with no problems. All the MP3s played back on my third-gen iPad (ATT 4G) randomly have clicks and digital distortion through them. These clicks and distortions don't always happen in the same place and not always with the same file. This points to a problem with the iPad. Anyone else having this problem?

    Thought I may as well post some additional photos consisting of my iPad compared to my sisters iPad 4;
    Mine is the top iPad, sisters is the bottom iPad.
    Close-up of my sisters iPad, same side;
    The camera doesn't capture the full glory of the back-light bleeding, you can just imagine how much worse and more apparent it would be to the human eye!
    (With these images, I have enchanced the brightness so it's more apparent)

  • How to recover data lost with Boot Camp

    I was removing my boot camp partition when in the middle of it boot camp crashed. I went back into boot camp to check if the option to uninstall windows was still there, but it wasn't. I went to about this mac etc. and the storage didn't show my windows 7 partition but the data from the windows 7 partition was gone and My macintosh HD was missing the storage. Any Ideas on how to fix it? Sorry if my question doesn't make sense.

    I guess everyone has their own idea of what is easy. A backup, reformat, restore to me is an utter PITA. Once you have free space, that free space is still not usable by Mac OS. You have to expand the Mac OS volume to use it. Sometimes this can fail because of the weird way Apple has chosen to sequence the partitions, with the Recovery HD Partition located after the Mac OS partition, making Recovery HD in between Mac OS and Free space. Apple's diskutil resizevolume command will move Recovery HD around as part of a resize. The basic command is:
    diskutil resizevolume /dev/disk0s2 limits
    That will show minimum, current and maximum resize limits. If current doesn't equal maximum, then free space has not been incorporated into the Mac OS volume. You can sometimes fix this with:
    diskutil resizevolume /dev/disk0s2 R
    That will expand the Mac OS volume to maximum size. If it fails then it's worth reconstructing the HFS+ catalog with:
    fsck_hfs -r /dev/disk0s2
    That command requires the file system be unmounted so you'll need to boot off another volume - Recovery HD is fine.
    All of these are commands leverage features which the GUI doesn't offer access to.

  • Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

    I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
    The meta data for each image is missing.
    I have over 2,000 images. I don't want to go back through each image and add meta data.
    Is there some way to move everything?

    No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
    Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

  • How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

    how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

    Yes, try to restore your iPhone from iTunes or iCloud backup.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Tell us the result if you will try.
    <Link Edited By Host>

  • Looking for a browser or app with one click data entry

    One thing I miss on the iPad is the ability to quickly enter information in web sites like my name, e-mail, etc. For example, Firefox for windows has an add-on called "InFormEnter" which places a check box next to each data entry block. Clicking on it allows entry of the information with one additional click. I know that some iPad password managers will remember this info, but most seem to require entering a password each time you use it.
    Mercury browser for the iPad remembers data for visited sites but seems to require manual input for every new site.
    Is there an app or browser for iPad that will work without entering a password or requiring manual input for every new site?

    The subscription version of LastPass has formfill capability and syncs information from your LastPass account that works on multiple platforms/OSs.

  • Compatible with your plan/Data pak required/Requires data pkg $9.99 or higher

    1) When I go to "Upgrade your phone"/"Select a phone or device" I see 59 results.
    When I click "Compatible with your current plan" the number goes to down to 52 results.
    However, 23 of them say "Data pak required" and another 3 say "Requires data pkg $9.99 or higher".
    Those phrases seem to imply that those phones are not compatible with my plan and
    would require changing my plan.  If so, why do they not disappear when I click "Compatible with your current plan"?
    2) Suppose I get one of the phones that say "Data pak required" or "Requires data pkg $9.99 or higher"
    and indeed I have to change my plan.
    Would I be obligated to the different plan for the full two years or could I just switch back to my old plan
    at some point and just not be able to access some features of the phone?
    I tried asking my question to Verizon Wireless directly but all I got was some ambiguous doublespeak
    wrapped in some polite niceties instead of a coherent answer.
    Thanks for any help.

    bwb2 wrote:
    1) When I go to "Upgrade your phone"/"Select a phone or device" I see 59 results.
    When I click "Compatible with your current plan" the number goes to down to 52 results.
    However, 23 of them say "Data pak required" and another 3 say "Requires data pkg $9.99 or higher".
    Those phrases seem to imply that those phones are not compatible with my plan and
    would require changing my plan.  If so, why do they not disappear when I click "Compatible with your current plan"?
    2) Suppose I get one of the phones that say "Data pak required" or "Requires data pkg $9.99 or higher"
    and indeed I have to change my plan.
    Would I be obligated to the different plan for the full two years or could I just switch back to my old plan
    at some point and just not be able to access some features of the phone?
    I tried asking my question to Verizon Wireless directly but all I got was some ambiguous doublespeak
    wrapped in some polite niceties instead of a coherent answer.
    Thanks for any help.
    1. Compatible with your current plan is referring to your minutes and Nationwide talk & text plan... The data plan is seperate.
    2. It depends on if you get a smartphone or not. If you get a feature phone that requires a data plan, then no you could not take away the data plan and still use that phone. Same goes for smartphones. You will always have to have a data plan with a phone that requires one no matter how you use it... Now if you got a feature phone that doesn't require a data plan, but you added a data plan, you could take that away at any time and revert back to the pay-per-usage plan.

  • I have a feeling this has been up here a lot.  I updated ios 6 to my phone with no problems but I also back my phone up.  I decided to help the wife out and update hers and something went wrong data lost.  All contacts, photos, etc without backup, help.

    I have a feeling this has been up here a lot.  I updated ios 6 to my phone (4S) with no problems but I also back my phone up.  I decided to help the wife out and update hers and something went wrong data lost.  All contacts, photos, etc without backup, help.

    if you have no back up in icloud or itunes the best you can do is sync with your computer and get back  what you can from there

  • HT1414 I had a new phone and I clicked some pictures and then I restore my new phone with the old back up and I lost my new clicked photos...please help me how can I get back those photos?

    I had a new phone and I clicked some pictures and then I restore my new phone with the old back up and I lost my new clicked photos...please help me how can I get back those photos?

    You were already provided the answer. If you do not have a backup of the phone while the photos were on the phone, they are gone. When you restore your phone from an old backup, anything that has been saved to the phone since that backup is deleted. Sorry.

  • Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

    Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked. 
    Any advice?
    Thanks.
    Alex.

    Cannot figure out what your talking about since it makes no sense.
    If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
    You must log in with your cell number and your my Verizon portal password. Not the account pin.
    Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
    1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
    If you don't have the information then there is nothing they can do.
    If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
    Good Luck

  • When I click on the - fire fox disappears from the task bar; it is still open but gone from the task bar, if I click on any icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

    Question
    When I click on the - to minimize fire fox, it does not close the window but the firefox icon disappears from the task bar; it is still open but gone from the task bar, if I click on any other icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
    Do a malware check with some malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

    Fresh installation of Exchange Server 2013 on Windows Server 2012.
    Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
    your folders with your Outlook data file (.ost)" is displayed.
    If I turn off cached Exchange mode, setting the email account to not
    cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
    time.
    I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
    Microsoft Exchange RPC Client Access service is running.
    No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
    Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

    So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
    Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
    First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
    Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
    This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
    work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
    In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
    up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
    like OutlookAnywhere - which I might add had their place under that scenario.
    In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
    previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
    EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
    So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
    but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
    users.
    Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
    Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
    certificate.
    See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
    So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
    Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
    always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
    This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
    there is a 3rd - I forgot, but you get the idea).
    Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
    the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
    Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
    NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
    Open Outlook - BOOM! It works... Was it as good for you as it was for me?
    You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
    and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
    So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
    Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
    So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
    SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
    Frustrating beyond reason - that should be Exchange's new slogan...
    Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
    PS
    ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

  • How is the best way to read data from an iphone if you lost your itunes data after a crash?

    How is the best way to read data from an iphone if you lost your itunes data after a crash?

    How is the best way to read data from an iphone if you lost your itunes data after a crash?

Maybe you are looking for