Tiger Mail--How do I make a jpg or gif image into a clickable link?

I'm trying to include a little banner graphic in outgoing email messages that will link to my blog when clicked. Tried doing this in imageready and it didn't seem to work right. I know this is very simple in Leopard Mail but still doing Tiger over here.
I've searched all over and really cannot find the proper way to do this.
Thanks!

Might try this How To: Make an HTML Email Signature For Apple Mail...
http://gatheringinlight.com/2007/12/03/how-to-make-an-html-email-signature-for-a pple-mail/
And a sample Source code...
http://www.box.net/shared/pvfvfly9nl

Similar Messages

How Do I Make Bitmap, Graphic, or Movie Clip into a clickable link??

I am designing a website entirely in flash (macromedia flash) but I cannot get the bitmap, graphics, or movie clips clickable links, although when hovered over turns into a hand. Any suggestions? I have also tried the following script;
on (release){
getURL("http://www.google.com/", "_blank")
Obviously I didnt use google, but still no go.
I'm hot linking the raw fla file below. I bought this template online and have modified it alot (all cosmetic) but I cant get the tabs to be links!? I used action script (the one posted above) in every layer and the text inside the tabs. But still doesnt work Does anybody know whats wrong?
Sorry, but I dont know much in action script, I'm a c++ and web designer, this is my first time working in only flash.
http://www.hotlinkfiles.com/files/2449178_iizru/_menu2_fv8.fla
Here is my modded template in my website: http://9karim.com/adminI only need to modify the menu bar

I wouldn't say you're screwed, you just have some work ahead of you to find out what are actually the buttons in that thing. If you look at the file on stage you'll see a large turquoise shape (an invisible button) that when you select it shows it has an instance name of "menu"... I still couldn't figure out what it has to do with those animated tabs, but it may lead to further discoveries.
There's a lot of stuff woven into that file, and with the frame by frame animation, it's hard to isolate just about anything. Based on what I see in the library as far as object naming goes, and your not knowing what's where, I'd conclude that this is an "acquired" design that has been decompiled into the fla you are trying to figure out. While I haven't any experience with decompiled files, it wouldn't surprise me if there is an increased level of complexity as a result of how the decompiler rebuilt the file.

How To Fade In a JPG or GIF Image using Inspector Build-In or Action

Inspector doesn't seem to have any Build-In or Action that allows me to FADE IN an image.
There only seems to be an Opacity Action that allows a FADE OUT.
This seems like kind of a software design oversight. Am I missing something in Keynote?

The Dissolve transition can be used for either/both a fade-in or a fade-out.
... but by now you already know that.
Message was edited by: Brie Fly

How JPG or GIF Image open in MIDP?

How my j2me application can support jpg or gif image format. I have tested png file in midp 1.0 and its not support other than png format( im not sure about midp 2.0 does it support or not). I have seen lot of mobiles those support gif and jpg file formats. Does j2me applications on those mobile can support other image formats?
Plus it is possible that i can develop my own decoder for jpg or gif format. I know it possible, but im talking related to its processing power consumption. Or is there any third party api exist to support jpg or gif file format on midp. Please r

Here is the code snap that read image from a URL.. I have tested this code on localhost & two different pc on lan in emulator.. but not in actuall mobile... but i hope it will work...
Image image = null ;
DataInputStream httpInput = null ;
DataOutputStream httpOutput = null ;
HttpConnection httpCon = null ;
String url = "http://localhost:8080/images/picture.png"
try
httpCon = (HttpConnection)Connector.open(url);
int bufferSize = 512 ;
     byte byteInput[] = new byte[bufferSize] ;
     ByteArrayOutputStream imageBuffer = new ByteArrayOutputStream(1024*50);
     httpInput = new DataInputStream( httpCon.openInputStream() );
               System.out.println("Http-Input Connecting Establish Successfully");
               httpOutput = new DataOutputStream( httpCon.openOutputStream() );
               System.out.println("Http-Output Establish Successfully");
int size = 0 ;
// read all image data ....
     while ( ( size = httpInput.read( byteInput , 0 , bufferSize ) ) != -1 )
                    imageBuffer.write( byteInput , 0 , size ) ;
// get byte from buffer stream
          byte byteImage[] = imageBuffer.toByteArray();
               System.out.println("read byte " + byteImage.length );
     // convert byte to image ...
     image = Image.createImage( byteImage , 0 , byteImage.length );
     return image ;
     //return null ;
catch( IOException e )
               System.out.println("\nUnable to Perform Image IO Operation with Host");
     return null ;
....................................

How do I make data from one Table flow into a separate Table

How do I make data from one Table flow into a separate Table in iworks numbers?

Great stuff Yvan,
KOENIG Yvan wrote:
Here you may see the way to transfer the contents of a column of Table A in a column of Table B
I used two kinds of formulas.
In the cell A2 of Table B
the formula is :
=Table A :: $B2
It may be :
=Table A :: $B
Apply Fill Down
Copy paste it in cell A1 which is in a header row.
This formula does its duty but it’s not robust enough and will not survive to a Sort.
This is why in B2, I inserted a more robust formula :
=OFFSET(Table A :: $A$1,ROW()-1,2)
You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
The first suggestion was the simple answer I needed,
Thank you

How do I make the background in an image transparent?

...How do I make the background in an image transparent?

It sounds like you're gif is a picture of a white background with a black chess piece on top. If that's the case, you're going to have to cut the black chess piece out of the gif. Save ~just~ the image of the chess piece. Discard the white background. Use only the image of the black chess piece with no background image at all.
Keep in mind that Java doesn't know that the white background isn't a part of the image. It doesn't understand that the white part is just the background. As far as it's concerned, the whole gif is the image. Only the component that ~contains~ that gif can become transparent.
So, if you want to have a white background to start with and then have that background become transparent when the piece moves, make the background of the ~component~ holding the image of the chess piece white. When the piece moves, have the background of the component holding the image of the chess piece become transparent.

How can I save a region of an image into another image?

How can I save a region of an image into another image? Should I use JAI?
Java2d? Is there an example?
Thank you.

Here is what I try, but I find out I just get a black square for my output image, can you please tell me what am I missing?
          ImageIcon file=new ImageIcon("images/clouds.jpg"); // You can't open bmp files
               // width, height looks correct:
               System.out.println (" width" + file.getIconWidth());
               System.out.println (" height" + file.getIconHeight());
               BufferedImage bi = new BufferedImage(file.getIconWidth(), file.getIconHeight(),
               BufferedImage.TYPE_INT_RGB);
               int x = 0;
               int y = 0;
               BufferedImage subimage = bi.getSubimage(x, y, 40, 40);
               File outputFile = new File("newimage.png");
               ImageIO.write(subimage, "png", outputFile);

In Mail, how do I make it so that email replies to me are sent to the email address from which I sent my original message?

I have two IMAP accounts set up in Mail, one work and one personal. The personal account also receives emails from a third account (but I have that set up through gmail's forwarding, not Mail). I am sending emails from my work account and replies are coming to this third account, which I don't want to happen.
How do I make it so that replies to me are sent to the email address from which I sent my original message?
Thanks for your help!

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

In e-mail how do I make a contact and can i import my contacts from my old pc to my new imac

How do I make a contact in the e-mail program and can I import my e-mail contact list into my new iMac e-mail

If by, "the e-mail program," you mean, Apple's "Mail" application, you make contacts by inputting them into the "Address Book" application. It's a separate application.
Since I have no idea what you mean by, "my e-mail contact list," I can't recommend a method for transferring contacts to your "Address Book."
You need to provide more information to get the answers that you need.
What's the name of the e-mail program that you want to use, i.e., Mail, Outlook, Entourage?
"New iMac e-mail," is not specific.
What's the name of the e-mail program that you were using on your PC, i.e., Outlook, Outlook Express, etc.?

How do I make a SEARCH button an image

Does anyone know or can point me to a source how to implement
a custom designed image into a SEARCH button.
I found out how to make it a standard button but can not find
a way to customize it.
I am working in DW MX 2004

Why don't you use scrollpane
import fl.containers.ScrollPane;
var myScrollPane:ScrollPane = new ScrollPane();
myScrollPane.source = "http://localhost/strategist/images/image0.gif";
addChild(myScrollPane);

How to convert bmp to jpg or gif??

hi all.
I would like to store image into database and retrieve it. But I don't know the method that can show bmp image. So I need to convert it before keep in database in type of jpg or gif?
Can you give me any suggestion?
or if you know how to show bmp image,tell me.
Thank you

Load the BMP into Microsoft Paint. Save it asJPG.
Which version of MS Paint do you use? Because theone
I've got only lets you save as .bmp. I'd use
PaintShopPro.
I'm using the version that came with my Windows 2000
machine. But you're right, I'd forgotten that it
didn't do that on my old Windows 98 machine.In that case ACDSee is a good tool to do this sortta conversion.

How Can I Make Smooth Moves of Still Images?

I'm doing a lot of moving stills in a current project, but I can't figure out how to add acceleration curves to the moves. I know the pen tool has a "smooth point" to add curves to keyframes, but I don't know where to apply them. I can apply them in the "scale" setting in the viewer, but not "center."
I'm sure there's an easy way, but I can't figure it out. Id prefer to do it in the canvas if possible. I want to reposition, slide, and zoom my photos so they don't "clunk" on the keyframes.

In the Canvas, make sure you're in Image + Wireframe mode.
Set up the basic move:
- position the layer at one end of the motion
- set one keyframe on Center
- move the playhead to the other end of the intended motion and move the layer again.
Right-click on the closing keyframe and choose Linear. Look really closely at the motion path (a series of small purple squares) in the Canvas. Connected to the currently selected keyframe (green square) are two circles, one dark purple and one light purple.
The lighter circle controls the curve of the motion. Adjusting this will change the path the object moves along.
The darker circle controls the acceleration. You'll see the smaller purple squares bunch up or spread out as you drag the darker purple circle; the further away the squares are from one another, the faster the motion.
Since you want to keep the path the same but change the acceleration, just move the darker circles. Ease In/Ease Out will start the process for you but with less control.
If all that doesn't give you the results you're looking for, consider using Motion or iPhoto instead. Some third-party plug-ins can also help if you're doing this a lot.

How do I make a slide show of images for voiceover in iMovie

I have images posted in iMovie project, over w/c I want to do a voiceover,but recording stops at end of first image, instead of continuing over all images. Do I have to make a slide show in iPhoto, to allow voiceover to cover all images? How do i select and create segment of images w/ voiceover?
I want to insert images w/ voiceover into video clip segments to make an iMovie.
Do I have to create a slide show in iPhoto first to allow this?
If I have to cerate slide show in iPhoto, it cannot sync w/ earlier version of iPhoto in Desktop computer. I have mavericks OS on my laptop.
Will this delete ability to work in iPhoto on my desktop/
Pls. advise process
Thnx

iPhoto lets you export as a webpage. This will create a webpage based slideshow of all the selected photos you can upload to your website.

How do I make Automator unmount a disk image everytime I quit Entourage?

I've found a way to password protest my email, by sticking my entourage data files in an encrypted disk image and then making an alias to link into that password protected disk image. My question is how do I make an Automator workflow that unmounts that disk image automatically when I quit Entourage. There has got to be a way to do this. It should be the most simple script.
On Entourage Quit: Unmount disk image [x]
But I can't seem to find out how to get this done.
Can anyone help?

Encore does have a fit-to-disc feature, called "automatic transcoding", which chooses the bit rate based upon how much media there is to encode, how much room is currently on the disc, and applying format-legal restrictions (minimum and maximum bit rates allowable by the format).
So for instance, 30 minutes of video will never fill a disc because the required bit rate to do so would be higher than allowable by the format.

Convert jpg to gif images

I make an application that create jpg images with jfree chart.
But my client need the graphics in GIF format.
I need:
1. A conver program to pass from JPG to GIF format
or
2. A program to generate graphics (pie 3-d with texts) in GIF
Someone likes help me?
Thanks.
MIGUEL ANGEL CARO
[email protected]

JFreeChart is open source, I'm sure you can get a Java GIF encoder library and wedge it into the JFreeChart API to make it create GIFs.
Why does it need to be GIFs, though?

Tiger Mail--How do I make a jpg or gif image into a clickable link?

Similar Messages

Maybe you are looking for