Time Capsule features?

Hi,
I'm about to buy a Time capsule 2 tb but I have a few questions before...
Can I use my hp psc 1315 all-in-one printer wirelessly with it even if it actually need a wire? Do I only have to plug it in the time capsule? Any other requirements or setup steps I must know?
Can I use time machine with my iMac of 1 tb on a Time capsule of 2 tb and also use the time capsule as an external storage device? If yes how much storage capacity remains?
Is it kind of a rooter? does any type of internet connection works? If my D-Link actually work, will it replace it easily?
I know that we can make a wi-fi network with it, but if I plug the iMac on it with Ethernet a wire will the data transfer be faster?
I think that'all...
Thanks a lot

1. You can generally print fine.. do not expect other functions to work.. if you want a network printer for scanning or faxing etc.. buy a new network printer that you plug in by ethernet or use wireless.. not USB.
2. Yes you can use 2TB TC with a 1TB disk.. no problem.. how fast the 2TB fills depends on the amount of large files you keep moving around.
You should not use TC for external storage. .it is a target device for Time Machine. There is no backup on the TC.. so files stored there will be lost if the device is broken, damaged, corrupted, fails etc. Apple offer replacement only during warranty. no service, no fixing no parts.
3. TC is basically an apple airport extreme router with a hard disk inside.. it is much more a wireless router than it is a NAS.
It can usually be used in bridge in the network. That is the easiest way.. but if you have a bridged modem then it can work as the main router.
4. Yes, it has 3 gigabit LAN ports exactly as AEBS and is a better and faster by ethernet than wireless.
Read up what a TC is and how TM works.
http://pondini.org/TM/FAQ.html
Read up particularly like mixing data and backup .. Q3 here.
http://pondini.org/TM/Time_Capsule.html

Similar Messages

Aperture, the aebs and the time capsule feature - multiple machines?

Hi folks,
The main aperture library and photos are located on my macpro which is downstairs.
I load photographs into AP exclusively through this machine.
I also manage the AP library from the MP as well.
However, I'm thinking about putting the AP library and vaults etc.. to an external which will be connected to my airport extreme base station in the 'time capsule' manner. My goal is to use the external as a network storage device and not use the time capsule feature at all - i use a variety of externals for backups b/c i have 5 macs and varying degrees of needing to back up.
So, if i'm on my macbook pro upstairs, can I access the AP library on the external? Would it be seamless? Has anyone tried this yet?
Sorry...would search, but that's down right now.
Cheers,
keebler

thanks. no way i'm trying it then b/c performance is important

Spotlight indexing of Time Capsule - feature or bug?

I understand why backups are indexed: the ability to use Spotlight from within Time Machine is a fantastic feature. But the method by which this index is created does not make sense where a Time Capsule is in use (or indeed most networked storage, but since many configurations are officially unsupported let's just keep this discussion focused on the officially approved one!).
Typically (from my sample size of 1), a complete system backup is of the order of 100GB; however, after the initial backup is complete, Time Machine only needs to copy modified files to the backup drive, which can lead to very small and fast subsequent backups: unchanged files are created in-situ with a hardlink to the existing copy on the backup drive.
A problem arises when, after a backup completes, Spotlight attempts to index the changes to the backup drive: it appears that it inspects every unindexed file (involves transfer to the local machine) including such unmodified/hardlinked files. This therefore gives rise to a situation where a backup that writes only a few kilobytes to the backup drive results in Spotlight reading hundreds of gigabytes from that drive.
Even with a throughput of 100Mbps, this would take close to an hour and a half (in reality, especially over wireless networks, it takes many hours); meanwhile Time Machine reaches its next scheduled backup and cannot proceed until Spotlight has finished indexing.
Altogether, this appears to render Time Capsules useless for system backup (unless one is connected via gigabit ethernet, which is neither a requisite nor a desirable constraint). One does not need to look far to see how many users this issue is affecting.
In previous versions of OS X, one could workaround this issue by disabling Spotlight indexing of the backup volume; however, since Lion (or Snow Leopard?), this is no longer possible.
To my mind, the design is flawed - some might call it a "bug": there should be a more efficient method of indexing drives, especially networked ones (ideally avoiding the redundancy of reindexing hardlinked files). At worst, Time Machine could provide to Spotlight all the metadata it requires for the entire backup: thus avoiding the need for Spotlight to read such files from the backup volume.
...or have I misunderstood something?

nickety wrote:
I understand why backups are indexed: the ability to use Spotlight from within Time Machine is a fantastic feature.
That's not the reason; Time Machine requires the indexing in order to work, especially for the "Star Wars" display.
Altogether, this appears to render Time Capsules useless for system backup
That's not normal; you have something else wrong, possibly a corrupt index. See the pink box in #D2 of Time Machine - Troubleshooting.
In previous versions of OS X, one could workaround this issue by disabling Spotlight indexing of the backup volume
Not really. The backups were still indexed; you just didn't get a message. See the note in item 2 here: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8991.html

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Can i put my ethnet internet cord in time capsule and use it as wireless internet?

HGjnv

The Wireless Router portion uses standard protocols that will work with ANY computer using standard protocols, including Windows, Mac OS, and Linux.
The shared Printing features are well supported by Mac OS, and may be partially supported by Windows and other Operating Systems.
The Time Capsule features require support from the Operating System in your individual computers, and at this writng, I believe only Mac OS X supports these features.

Is the wifi faster in the new 3T time capsule (cylindrical) than the older 1T (flat box)?

I have a 4 year old 1T time capsule that is full (it's a flatter form factor). I am contemplating upgrading to a new 3T time capsule (cylindrical form factor). Aside from the extra storage, is there anything else better? Is the wifi data transfer faster?

The new Time Capsule features "ac" wireless capability.......2-3 times faster wireless than your current Time Capsule.....but in order to realize the benefit of "ac", your Mac needs to be capable of receiving an "ac" wireless signal.
If it's not, then you should expect about the same performance as you have now.
Both your older Time Capsule and the newer Time Capsule support Gigabit Ethernet, so the speed capabilites would be equal over a wired connection.

Airport extreme time capsule. Wifi dropping

I have an airport base time capsule 3rd generation with 2 airport express as range extenders. Up until recently the network worked very well. Lately the wifi keeps dropping. One moment I'll be on wifi, the next ill be on 3G, then back again. My apple tv keeps dropping on and off as well. It's been my experience with other routers that they have a somewhat limited life. I'm wondering if it's time to upgrade to the 5th generation. Since the time capsule feature works fine, can I still use that as the backup while getting a new base? By the way, all software and firmware has been updated

It says you have the wrong password.
WPA handshake failed with STA 10:68:3f:46:d2:69 likely due to bad password from client
Reset the TC to factory and start again.
But do not be surprised if the v5 utility no longer works to do the setup.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

I enabled the guest network feature on my time capsule. Can I configure my airport extremes guest network feature if I use this as a network extender using a "roaming" network?

I enabled the guest network feature on my TC. Can I configure my airport extremes guest network feature if I use the extreme as a network extender connecting my Airport Extreme to my TC via ethernet cable?

Unfortunately no, since the AirPort Extreme should be configured in Bridge Mode if it is connecting to the Time Capsule using an Ethernet connection.
The Guest Network option cannot be enabled when the AirPort is configured in Bridge Mode.
Another way of saying the same thing is that the Guest Network cannot be "extended" either by using an Ethernet connection or wireless. It is only available from the Time Capsule "main" wireless router on your network, not any extending devices.

Guest network feature of Time Capsule/Airport Extreme in conflict with DNS on OS X Server?

Hi, I want use the guest network feature of Time Capsule/Airport Extreme which requires an external DNS server but my OS X Server is the dns server...Can I configure server and airport with an external dns without messing up my OS server?
Thx Ron

If you want to use the guest network while also using your server for DNS - you will need to do the following: It's a bit painful - but it works.
On your Airport Device (Airport Extreme or Time Capsule) - in the Internet tab you will need to do one of the following:
1) Leave the DNS Servers Blank - which they will default to the DNS servers provided by your ISP.
2) Actually enter your ISP's DNS servers.
3) Enter Open DNS servers (I use 208.67.222.222 / 208.67.220.220).
The DNS servers specified in the airport device must be internet routable addresses (if you are going to use the guest network functionality) - and cannot refer to private ip address (e.g. 10.x.x.x, 192.168.x.x, etc).
Here is the painful part...on all of the devices (Macs, PCs, phones, ipads - that will be used on your "private" network 10.0.1.x - you will need to provide static DNS setting (but still allow DHCP to assign the devices IP address). You will specify 10.0.1.13 as primary DNS and 208.267.222.222 (or your ISP's primary DNS IP).
One you do this - your devices that you permanently use on your local network - will still use your server for DNS - and the external DNS - should your DNS server happen to be down.
Anyone visiting your house - will connect to your guest network - and automatically be DHCP assigned a guest IP address - and the external DNS servers that you specified in the Airport Extreme device.
This has been working great for me. I suspect that the guest network functionality is flawed in the Airport Extreme/Express and Time Capsule. Since I do not have another router that provides a guest network - I cannot say whether this issues is limited to the Airport devices - or whether this workaround would need to be done - regardless of which brand of router is providing the guest network.
In a nutshell - your household permanent devices will have to specify static DNS servers - but your guests will connect seamlessly without having to change and risk messing up any of their device settings.
If this solution works for you - Please be sure to click either "This solved my problem" or "This helped me".

Time capsule models vs. features

According to Wikipedia, we are now in the 4th generation of Time Capsule. Here's the information I found there:
G1
* MB276LL/A 500GB Time Capsule
* MB277LL/A 1TB Time Capsule
G2
* MB764LL/A 500GB Time Capsule
* MB765LL/A 1TB Time Capsule
G3
* MB765LL/A or MB765X/A 1TB Time Capsule
* MB996LL/A or MB996X/A 2TB Time Capsule
G4 (late 2009)
* MC343LL/A 1TB Time Capsule (europe: MC343Z/A)
* MC344LL/A 2TB Time Capsule
My question: Does anyone on this forum know how I can find out the capability/feature differences for these different models. e.g., do all models have 802.11n capabililty? What models have dual band 802.11n capability?
Thanks for your help.

G1
* MB276LL/A 500GB Time Capsule
* MB277LL/A 1TB Time Capsule
These are both single-band models.
G2
* MB764LL/A 500GB Time Capsule
* MB765LL/A 1TB Time Capsule
These are identical to the single-band models, expect that they are simultaneous dual-band versions.
G3
* MB765LL/A or MB765X/A 1TB Time Capsule
* MB996LL/A or MB996X/A 2TB Time Capsule
Same as the dual-band version, but offer greater internal hard drive capacity.
G4 (late 2009)
* MC343LL/A 1TB Time Capsule (europe: MC343Z/A)
* MC344LL/A 2TB Time Capsule
These have an improved antenna design offering better bandwidth & distance performance.

I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

As described above.
I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

You will have setup issues.. as the latest AC model requires a Mac or iOS device.. eventually apple will release a windows version of the utility.. and the current one does partly work but Apple seem in no hurry.
You can find a Mac or iPad equipped friend to do the setup.. once setup the Windows computer can use it.
BUTT you cannot access it from remote..
Not with windows. You need BTMM and iCloud account. AFAIK even with those you cannot reach the TC.
You can do it manually.. using a vpn. Buy a proper vpn router and use a vpn client on the windows computer.. the TC would be in bridge to the network..
Apple really did not make this for windows.. and SMB access is only provided on LAN access not WAN.

TS3972 How can I access the files(movies,music,etc) in my Apple Time Capsule(4th Gen) from my Apple TV(3rd Gen). This is very frustrating Apple has not provided a basic feature, and me buying the Time Capsule and Apple TV is an complete waste of bucks.

I have an Apple TV (3rd Gen) and Apple Time Capsule (4th Gen). How can I access Movies and Music stored in the Time Capsule from Apple TV. This is very n't give frustrating that Apple doesn't give their customers with an straight forward access to their customers in between their own products. Iam repenting that buying these products is completely waste of bucks. Appreciate your help...

Welcome to Apple Support Communities
The Time Capsule is clearly announced as a router with a hard drive to make backups, not to store anything and share it with your Apple TV.
To access to movies and music from the Time Capsule, note that the Apple TV can only access to them if they are stored in your iTunes library, so you will have to put your movies and music into iTunes to access to them, and then, put your iTunes library on the Time Capsule in order to access to your data from there

Time Capsule features?

Similar Messages

Maybe you are looking for