Time Capsule Icon No Longer Appears on Desktop

Two weeks ago I had AT&T U-verse cable, internet, & phone installed. As part of that installation they installed an AT&T router/wireless combination. The ethernet cable that was previously connected to Time Capsule is now connected to the AT&T device. There is no longer any ethernet connection to Time Capsule. The Time Capsule icon still appeared on my desktop and I manually performed back-ups from my Windows applications to Time Capsule. Time Capsule went from displaying a constant green light to displaying a flashing yellow light. That worked for several days. After about a week of that there appeared on my screen a 'wizard' of some sort recognizing the status of Time Capsule. It said this 'wizard' would eliminate the flashing yellow light. I followed the steps through the 'wizard' and at one point the flashing yellow light turned to constant green. There were a few more steps in the 'wizard' and when it was finished the flashing yellow light reappeared. The next time I tried saving files from Windows I could not connect to my w: drive, and the Time Capsule icon no longer appeared on my Mac desktop. I went into Airport Utilities and there is a box checked that should display the icon properly. Any ideas what's happening? How do I restore Time Capsule so I can back-up my files. Thank you.

Welcome to the discussions!
I don't have 10.6.1 yet, but have noticed this happens very occasionally on my MacBook Pro, but not on my iMac. Simply resetting Time Machine on my laptop has done the trick.
Open System Preferences
Click on Time Machine
Click your Time Capsule to highlight it
Click Use for Backups
If that does not do it then delete the "com.apple.TimeMachine.plist" file. It's located as follows:
Macintosh HD > Library > Preferences
Restart your computer
Then perform the same steps as above to setup Time Machine again.
The resets will not affect any of your backups.

Similar Messages

  • Updated OS & now Time Capsule icon isn't showing up on desktop

    Just finally upgraded to 10.5. Now my Time Capsule icon isn't showing up on my desktop. Light is green on TC and I can navigate to it through Macintosh HD folder, then shared devices. I just used it as an additional external hard drive at this point. How do I get the icon to reappear. I already updated Airport too.

    cybergroupie wrote:
    my Time Capsule icon isn't showing up on my desktop.
    Presuming you mean the volume of the Time Capsule's internal disk, mount that, open the Accounts panel of System Preferences, authenticate by clicking on the lock if it's "closed", select your account, select the "Login Items" tab, then drag the icon of that drive to the login items list.
    Note that this will cause a window of that drive to appear each time you log in. If you search these discussions, you may find some older threads that discuss ways around that.

  • Time Capsule icon remains on desktop

    Hi,
    On my iMac, the TC capsule is only visible during backups (or after I entered the Time Machine). It disappears automatically as soon as the backup is made, and only appears again when the next backup is to be made.
    On my wife's MacBook, on the other hand, the TC icon remains on the desktop after the first backup of that day. Several times an hour, the MacBook seems to want to check if the TC volume is still present (which my iMac doesn't do).
    Is there a way to make Time Capsule / Time Machine clear that I only need to see the TC icon when backups are made? And that there's no need to poll the TC volume every 10 or 15 minutes or so?
    BTW: we are talking about 1 and the same Time capsule used by both the iMac and the MacBook.
    Any help would be highly welcomed.
    Thanks
    J.

    Amenhotep,
    I believe the TCs icon is there because you have manually mounted it once before. When the dialogue box opened asking for a password you clicked "Remember password in my keychain".
    Try the suggestion in the second paragraph below...
    *Authentication Issues* (For Time Capsule / AirDisk Users) #
    Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left. Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
    Also you may see an item with the name of your Time Capsule. It will have a little blue "@" icon and the KIND will be "Network Password". This Keychain item is only created if you have physically connected to your Time Capsule via the "Connect As..." function in the Finder window. Delete this entry. It will be recreated next time you manually mount your Time Capsule.
    Now, go to the Desktop and Ctrl-Click the Time Capsule icon. A contextual menu will appear. Select "Eject". The TC icon will disappear. If you MUST mount the drive again in the future, do not select "Remember password in my keychain" and remember to manually Eject it when you are done.
    Let us know if this resolved your issue.
    Cheers!

  • Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

    Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

    Yes....It happens all the time. I also erased my HD and installed Snow Leopard but with no success. Tried lots of REBOOTING but nothing worked for me.As I have already installed the new OSX I think there is no need to go through the below procedure. What do you suggest?
    Before you go through the ritual of reinstalling the entire system just try to do a "factory reset" of your bluetooth environment. To do this you need to run the Bluetooth Explorer which is a utility installed as part of XCode.
    1. Launch Bluetooth Explorer.
    2. Select the "Modify Software & Device Configuration" from the Utilities menu.
    3. Keep the first 4 checkboxes checked (one will say "Full factory reset").
    4. Click "Perform actions" button (lower right of window).
    5. Reboot (possibly the Reboot NOW button will work, if not just do a normal reboot).
    Hopefully that will clear your problem(s) so you can re-pair your bluetooth devices.
    Good luck.

  • Time Capsule Icons Concern

    Hello, I have a question with the different Time Capsule icons that show up on The Desktop, in the Finder Sidebar, and in Time Capsule preferences.
    They change constantly. Should I be concerned with it?
    Could someone tell me what they all mean?
    One looks Greenish and has the Time capsule arrow on it,
    Another is Light Blue and has three people,
    And another that is Aqua Blue and has the AirPort logo on it
    Forgive me for not using specific terms but i don't know the names.

    One looks Greenish and has the Time capsule arrow on it, > Time Machine usage for backup
    Another is Light Blue and has three people, > Shared device
    And another that is Aqua Blue and has the AirPort logo on it > wireless connection

  • 2 Time Capsule Icons In Finder

    I was having problems connecting to the internet and called AppleCare. They had me reset my time capsule and set it up again from scratch. All was well last night but this morning when I woke my iMac up there are now 2 Time Capsule icons in the Finder. One looks like the normal TC icon and says Mac server and the other looks like a PC and says PC server. Anyone know what's going on? This thing worked flawlessly until yesterday.

    honestly I went through the settings on the TC and was not able to find anything that would specifically effect windows SMB filesharing. My thought is that it, by default, has that particular protocol enabled. From looking around the other forums, it appears that other users are having PC servers popping up when networked with other Apple devices (computers specifically). My thought is that it is a small "bug" in leopards expanded Windows networking abilities. Many people claim to not have had the issue with older Mac OSX versions and that it only arose when upgrading to leopard.
    Since the Macbook is not here right now for me to experiment, and my TC does not show up as a windows server, perhaps give a try at disabling SMB file sharing in the Sharing preferences pane. If the PC Server portion of the TC disappears than we know it is Leopards SMB sharing that causes this. if you network with other windows computer though you will want to re-enable this.
    The fact that all SMB enabled apple devices don't show up on other Macs as PC servers indicates to me that it is likely a bug (either all or none should show up), as my MacPro does not show up as a PC server on the Macbook.
    Go figure. At least this isn't terribly intrusive (maybe just a little ugly to have that blue screen of death lingering in the finder sidebar!)

  • Time Capsule Disk Doesn't Appear in Finder or Disk Utility

    I have a 500G Time Capsule (single band, I think) that I want to partition (just into disk images, not volumes) so that I can maintain separate-sized locations for my family's music library, photos, and Time Machine backups for the non-media files on each of a Mac Mini and 4 laptops.  But I will ask more about that later. 
    My more immediate problem is that the Time Capsule Disk Volume generally just doesn't appear in my Finder or in Disk Utility at all.  A couple weeks ago, for some reason, it did appear once and I took the opportunity to create a 215G Disk Image--leaving 250G for the rest of the Disk Volume which was indicated as having 465G rather than 500G actually available.  But since then (as before) the Time Capsule volume hasn't appeared in Disk Utility at all, and only rarely in the Finder.
    In the Finder the Time Capsule appears under the Shared heading in the left panel, with the Time Capsule disk volume appearing as a folder in the right panel (if it connects, which it usually requires a password for, but sometimes it doesn't...).  If I open the folder then the right panel goes blank (indicating, I think, that I have opened the volume but there is nothing inside) and the volume (usually) eventually shows up under my own Mac in the Devices heading.  (That is, the Time Capsule disk volume shows up along with Network, Macintosh HD, and Remote Disk in the right Finder panel when I select my Mac under Devices in the left Finder panel.)  At that point the TC volume shows up in the Finder as a 220G Volume and the disk image shows up indented under it as a 215G Disk Image; indented under the Disk Volume there is also a 5G Sparsebundle file from a Time Machine backup.  If I open the 220G Disk Volume in the right Finder panel then it shows only the 215G Disk Image and the 5G Sparsebundles in the right Finder panel.  This seems to suggest that the 215G Disk Image and the 5G Sparsebundles are both treated as 'used' and the 220G size given for the Disk Volume represents what is left (although 215+5+220=440, so where the extra 25G went I don't know).
    If I open the 215G Disk Image in the right Finder panel then, after a while, it shows up as a Disk Image in the right Finder panel when my Mac is selected under Devices in the left panel.  I can create folders in the Disk Image and copy documents to those folders, at least.
    But in any case, regardless of whether I open the 220G Disk Volume or the 215 Disk Image in the Finder, the Disk Volume never appears in Disk Utility so there is no possibility of reformatting it.  The 215 Disk Image has sometimes shown up in Disk Utility (and once it apparently allowed me the option of partitioning the Disk Image into further Disk Images), but sometimes it doesn't show up and I haven't been able to figure out why it does or doesn't.
    I find this all very confusing and the Finder and Disk Utility behavior seems downright erratic.  I'm not sure whether something is broken or if I just don't understand how it works (starting with the difference between the Devices and Shared headings in the left Finder Pane).  I would appreciate any advice on how I can reliably access the Time Capsule disk volume in the Finder and Disk Utility.  Thanks.

    Same problem after 10.8.2 update yesterday,
    Time Machine functions but disk does not mount in finder.
    The disk also shows up in disk utility when TM is running
    as mounted (beneath a sparse image file) but not visible.
    Is this a bug, or a feature?
    LW
    MBPro. OSX Mountain Lion, backing up to Time Capsule

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • What does this error message mean? "An unexpected error occurred (error code -6584). It arises when I open my Time Capsule icon.

    I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule.  Thats when I learned that Time Capsule stopped backing up back in January.  So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message.  What does it mean and how can I fix the problem?

    The backup is corrupted in some way.. you need to verify it.
    The error is common enough but there seems to be a range of solutions.
    Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
    Look particularly for the posts by Pondini.
    And check his troubleshooting for methods of doing things like verify.
    http://pondini.org/TM/Troubleshooting.html
    A5

  • Why does the Time Capsule of my neighbour appears and not mine?

    Why does the The Time Capsule of my neighbour appears and not mine?  I tried everything.
    Can I use the Capsule as merely a back up without making use of Wifi?  By connecting by cable to the computer?

    Why does the The Time Capsule of my neighbour appears and not mine?  I tried everything.
    What generation is your neighbour's and what generation is yours??
    Sometimes the changes in the TC and firmware can make wireless fail.. also location is important.. the location of your neighbours might be better than yours.. his also might interfere with yours.. set a fixed channel and try the various channels.
    Can I use the Capsule as merely a back up without making use of Wifi?  By connecting by cable to the computer?
    Sure, but you need to work out how the network is going to work.. if you are still picking up network from wireless.. then set static ip for the TC in a different IP range.. set no gateway (router ip) or dns and it will work just fine.

  • Trusteer Rapport icon no longer appears in address bar since upgrading to Firefox 9.

    I used to have Firefox 7 and the Trusteer Rapport icon used to appear in the address bar.
    Now I have upgraded to Firefox 9 the icon no longer appears, which is annoying.

    Are you running the latest version of Trusteer Rapport? If not, update. Old Trusteer Rapport versions are known to be buggy with previous versions of Firefox. If that doesn't fix your issue, try Trusteer Rapport support too.

  • Firewire icon does not appear on desktop

    My Firewire is connected and turned on but it's icon does not appear on desktop. I ran disk utility and the drive's icon appears there. I can run repair tests on it but not a permissions test. When I checked "Get Info" I noticed a line that reads "OWNER ENABLED: NO". What Can I do--I have a lot of important files on the drive and need to access them. I have also run 3rd party disk utilities that say the firewire drive and all files are 'ok' but still I am not able to access it in any way.

    If disk utility sees the drive then you should be able to choose it from the list and click "Activate" (or "Mount" or whatever it says in English )
    PB G4   Mac OS X (10.4.7)  

  • Show Time Capsule icon in dock

    I removed the time capsule icon from the dock by mistake. How can I reinstall it? (in addition to the one on the menu bar at the top!)

    Thanks a lot. I tried this before but must have done it too quickly. Slow dragging did the trick!

  • Iphone icon does not appear on desktop

    iphone icon does not appear on desktop when plugged into my mac, so I can't select it to manage music via the sync method.

    Lyssa - Thank you for your response. I thought that might be the case, but although there is a symbol in the upper right corner that reads "iPhone"  the list of music is my entire iTunes list. I would like to update my music on the phone but can't seem to "see" what is currently there when plugged into my iMac. It all used to be so much easier and user friendly.

  • Time Capsule Icons

    What do the time capsule icons mean? when you click on change disk.
    One has the symbol of the arrow moving counter clockwise and the other looks like three little people?

    Yes, I am wanting to know what these are as well. Anyone know?

Maybe you are looking for

  • Follow Up to iMac G5 Crash n Burn

    If you go here you will read of an issue my wife was having. We thought it was resolved and this is a follow up to that/those issues. In the end it was a defective hard drive. Which Apple replaced after confirming what Diskwarrior® had identified aft

  • HP Smart Web Printing feature, problem with IE7 and FireFox3

    "HP Smart Web Printing" problem with Internet Explorer 7 and FireFox 3I have a laptop that came with: Windows Vista Home Premium, Internet Explorer 7, FireFox 1.9. Everything worked fine. Recently I bought a "HP Photosmart C4580 All-in-One" printer t

  • After uploading to lion i have upgrade to iphoto 11 and it crash all times

    I want to solve this problem and i dont want to loose my photos . can you help me? thanks This is the crash rapport: rocess:         iPhoto [1161] Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier:      com.apple.iPhoto Versi

  • What is the best way to format Videos for ipod touch?

    What is the best way to format Videos for ipod touch? Used Quicktime Pro/ Export (iPhone setting). Videos aren't as crisp as downloaded Videos. Compressors /ipod video Setting also looks crapy (with bitrate med & High). What should I use?

  • Gmail works on iPhone but not Mail?

    I just got a gmail account & tried to set it up with Mail. After searching online when it didn't work I made sure to use IMAP (as suggested by many) but it still shows the account offline in Mail & says "invalid credentials". I synced my iPhone & gma