Time issue in WL9.2 and JDK1.5

I am using WL9.2 and JDK which comes along with WL9.2.
I could deploy my application successfully.
But I am facing an issue with time. The time with WL9.2 application is around 15 minutes faster.
For eg. if I have a dislpay of time say 10.00 is WL8.1, it shows 10.15 in WL 9.2.
For eg . if system time is 10.00 , WL applcition time is 10.15.
Is it an issue with WL9.2 or JDK 1.5 which comes along with WL9.2
Please put your thoughts
Thanks in advance,
-Binu
Message was edited by:
binurajkr

Similar Messages

Two issues with JnlpDownloadServlet and JDK1.6.0_03

hello everybody,
i recently tried to deploy a simple java application via webstart using the JnlpDownloadServlet of JDK1.6.0_03. thereby i encountered two issues for which i could neither find a solution nor a bug report. has anyone experienced the same?
issue 1:
when setting an explicit timestamp (e.g. TS: TS: 2007-01-01 00:00:00) in my jnlp file, jws always prompts me for an optional update (e.g. when accessing the jnlp the second time via browser) even though i haven't changed anything.
i checked the code and in my opinion the problem is that in line 139 of JnlpDownloadServlet.java a new JnlpResource is created upon every request (esp. for the request to my jnlp file which should be macro-expanded). the lastmodified-attribute of this resource is always the timestamp of the (jnlp-) file on the server (see JnlpResource.java) which is of course NOT the same as the one i explicitly set vie TS: ... in my jnlp file. however, in order to detect if something has changed, line 159 compares the explicitly set timestamp (which is sent with the ""If-Modified-Since"-header, see 131) with the actual file timestamp of the server ("jnlpres.getLastModified()") instead of using the explicit timestamp of the jnlp-file. the latter is retrieved too late (during construction of the response).
issue 2:
in case i ommit the "href"-attribute of the "jnlp" tag in my jnlp-file, my application gets installed without asking me beforehand (which is wrong when creating shortcuts and the like). this is not the case if i use the "href"-attribute to point to itself. however, jws will fire multiple requests then. see related post in this forum.
any ideas or experiences with these two issues?
thanks in advance,
stephan

From the description you have I would first make sure that you have adequate coverage everywhere you need it. Make sure that the phone can see an AP at -67dBm or better at all times. Using the site survey utility in the phone would help you verify this.

Real time issues in fdm

What are the real time issues in fdm

Nice and vague, try to be more specific with your questions and you will likely receive a better response.

I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?

Porting an InDesign Plugin from InDesign CC to InDesign CC 2014 the plugin complies successfully with the InDesign CC 2014 SDK but at run time presents this error and is disabled. Does anyone know what might be the issue?
Run TimeError Message Presented when InDesign CC 2014 runs:
Adobe InDesign cannot load the FastFractions.InDesignPlugin plug-in. The FastFractions.InDesignPlugin plug-in requires the 9.0 version of InDesign. Please contact the vendor to get a compatible version of FastFractions.InDesignPlugin.
Show this alert again?

As already told this means that the plugin has not been ported correctly. Some part of it for ex InDesign libraries or frameworks are being referenced from the CC sdk instead of the CC2014 sdk. To troubleshoot it i would advise you to rename the folder containing the CC sdk on your machine and then compile the project, it will fail to compile and you will get to know straightaway what aspects of the ported project are still accessing the old sdk. Fix the errors and your plugin will load fine.
Thanks,
Manan

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

Howdy eewebe13,
So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
Please step through this article for that scenario.
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Thank you for visiting Apple Support Communities.
Nubz

HT203483 Date and time issue in iPhone 5c

I have update with latest firmware but date and time proble not solved

Hello komalsingh235,
If I understand correctly your phone is not automatically getting the correct date and time. Use these steps from the following article. If the troubleshooting does not correct it, then it also has a resource for you to get additional support:
iOS: Troubleshooting issues with date and time
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
Thank you for using Apple Support Communities.
All the best,
Sterling

Date and Time Issue.

I have date and time with different format , Need in Single date and Time format.
Input
13/03/15 09:09
13/03/15 07:39
13/03/15 08:09
13/03/15 08:51
3/13/15 09:39:14 AM
3/13/15 09:38:14 AM
3/13/15 09:37:59 AM
3/13/2015 09:37:59 AM
Problem with the below Output
01/01/01 12:00 AM
01/01/01 12:00 AM
01/01/01 12:00 AM
01/01/01 12:00 AM
13/03/15 09:39 AM
13/03/15 09:38 AM
Output required in the below format for all of the above date and Time with proper date & time
13/03/15 09:39 AM

Indudhar,
I don't know if the following will help or not, but hopefully you can see what I'm doing and modify it to give you the string format of the DateTime the way you want it:
ption Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Public Enum DateTimeFormat
LongDateLongTime
LongDateShortTime
ShortDateLongTime
ShortDateShortTime
LongDateOnly
ShortDateOnly
LongTimeOnly
ShortTimeOnly
End Enum
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
' Test it here...
Stop
End Sub
Private Function GetFormattedDateTimeString(ByVal dt As DateTime, _
ByVal formatType As DateTimeFormat) As String
Select Case formatType
Case DateTimeFormat.LongDateLongTime
Return String.Format("{0} {1}", _
dt.ToLongDateString, _
dt.ToLongTimeString)
Case DateTimeFormat.LongDateOnly
Return dt.ToLongDateString
Case DateTimeFormat.LongDateShortTime
Return String.Format("{0} {1}", _
dt.ToLongDateString, _
dt.ToShortTimeString)
Case DateTimeFormat.LongTimeOnly
Return dt.ToLongTimeString
Case DateTimeFormat.ShortDateLongTime
Return String.Format("{0} {1}", _
dt.ToShortDateString, _
dt.ToLongTimeString)
Case DateTimeFormat.ShortDateOnly
Return dt.ToShortDateString
Case DateTimeFormat.ShortDateShortTime
Return String.Format("{0} {1}", _
dt.ToShortDateString, _
dt.ToShortTimeString)
Case DateTimeFormat.ShortTimeOnly
Return dt.ToShortTimeString
Case Else
Return String.Empty
End Select
End Function
End Class
I hope that helps. :)
Still lost in code, just at a little higher level.
No Frank, Same Problem.....Kindly help me X1 = 14/03/15 19:30
I need time Diff of now and X1
Dim myDateTime As DateTime = GetFormattedDateTimeString(X1, DateTimeFormat.ShortDateOnly)
myDate = myDateTime.ToString("dd/MM/yy")
myTime = myDateTime.ToString("hh:mm tt")
Dim myDateTime1 As DateTime = Now
Dim myDate1 = myDateTime1.ToString("dd/MM/yy")
Dim myTime1 = myDateTime1.ToString("hh:mm tt")
Dim diff As TimeSpan = myDateTime1.TimeOfDay - myDateTime.TimeOfDay
Dim diffString As String = String.Format("{0:00}:{1:00}:{2:00}", _
Math.Abs(diff.Hours), Math.Abs(diff.Minutes), Math.Abs(diff.Seconds))

Transition and image duration times issue

I'm trying to put together an image slide show w/music, etc. I have iM08 and can't set my transition time to 2 seconds and the image time to 4 seconds to save my life. The adjustments seem to have a mind of their own. Is this a solvable problem in '09? My preference would be to have a 4 second transition and a 5 second image duration.
In iMovie preferences I have checked the box regarding time codes.
If this can't work for me, I will not buy the upgrade but rather find a 3rd party slide show program that will do what I want it to do.
Frustrating!
Thanks for any help.

Can't get that to set in Project Properties - have tried to set 4 seconds and 9 seconds repeatedly. I still have varying lengths of transitions and photo durations showing up. Any clues how to get this to behave?
I set the photo duration at 10 seconds, the transition duration at 3.15, and what I end up with is this:
Transition durations of 3:09 - 3:12 and photo durations at 3:11, give or take. That's the best I'm able to do from my limited perspective.
Can I get the audio to loop or do I just drop it into the slideshow again?
Any further thought?
Thanks!

Reporting Service issues without service and land line access?

Since Verizon makes it extremely difficult to report poor coverage, I figured I would just place this information online in hopes of an agent reading and reporting the problem.
There is little to no Verizon coverage of all types (4g3g/1x) over pretty much the entire campus of the Illinois College in Jacksonville Illinois which is about 2 miles off I72 and about 20 miles west of Springfield Illinois. Actually the entire community has poor service from Verizon yet US Cellular and AT&T seem to rock the area with full 4G. From talking to students and faculty this is a long known problem and in many spots there is absolutely zero voice coverage, forget about data from Verizon. We have *228’d the phone many times out by I72 and my dad and mom’s Android 3g/4g smart phones phones do not work at all either.
It seems that this is known by Verizon, as I have seen coverage problem reports on the web dating back to 2008 regarding this area in the Verizon forums. Certainly Verizon can do something to remedy this, especially being so close to a major Interstate and when other carriers have great service in the same area, come on AT& T is horrible across 70% of Illinois yet they work in Jacksonville, now that is embarrassing. It would be nice to actually be able to let my daughter use her phone even forgetting about data but come “cover 97% of the people” I know that is not true. Let's go Verizon, my friends on AT&T and US Cellular and Sprint all get better service (they can make calls, at least)... on Verizon we can't do anything even with roaming enabled!
This forum says call customer service 1-800-922-0204 from landline or *611 but that doesn't work for my daughter and I'm in mexico this week. There has got to be an online way to report issues?

Would love too, but family has Verizon in several states including other college towns Tempe AZ, Macomb Illinois, Jacksonville Illinois and home in Rockford IL we have used Verizon for years.
If daughter changes companies just for Jacksonville Ill, do we all change?
Remember AT&T has horrible coverage in most of illinois yet they rock in a dinky little college town in south central Illinois, go figure. Verizon says they cover 97% of the nation and their maps are quite clear about the areas they cover including extended coverage. Verizon is misleading people as although extended does mean covered by someone else it does be coverage is supposed to exist. Verizon can not have it both ways and frankly, family cannot have a bunch of different plans and I really want to avoid switching everyone. When I get back in the US I'll call the 800 number and see what can be done for daughter but Verizon should have chat support not just chat sales so stuff can be done online.e would think Verizon would want to know where people have coverage issues..
On

When i turn it on it takes a long time to start up and it freezes in some of the apps so I had to turn it off

Recently when I turn on my mac it takes a long time to start up and at first and in the beginning it appears with a grey screen and at the end it turns blue.
Also it freezes in some of the Apps, so it make me to turn of.
Please be kind enough to guide me to solve these problems.
I thank you in advance for your cooperation and quick response.
Best Regards
Ahmad Emami

What SP are you on? We had a similar issue w/SP6 but it was resoloved with SP7.
Michael

Non NVidia graphics card issues with Adobe and Mountain Lion

It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
Here is what happens
As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
I tested this on the following Macs
MacBook Pro (Early 2009) with NVidia 9600M GT - it works
MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
The same Mac Pro (Early 2009) with NVidia GT120 - it works
MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
iMac (Late 2012) with NVidia 680MX - it works
Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
Already got in touch with Adobe
With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
A typical response. IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change. I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time. WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro. Eventually…
Frankly, good luck getting either side to do anything about this. Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party. Or perhaps one of the Apple mailing lists will prove useful.

An issue with authentication and authorization on ISE 1.2

Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
end

Yes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.

Time issue in WL9.2 and JDK1.5

Similar Messages

Maybe you are looking for