Time Limit in SE30

Hi Gurus,
I'm using SE30 to analyze the performance of a program. It takes more than 30 minutes for that program to finish. However, I always got a message "Could not end the measurement (Time Limit Researched)" in SE30. Anybody knows how to resolve this problem?
Thanks
Jerome

Hello Jerome
The parameter rdisp/max_wprun_time restricts the maximum runtime of a dialog work process. By default it is set to 30 minutes.
You can up the limit or you might want to look into other ways preventing to reach the limit, using background process or limiting selection or cutting up measurements in parts.
Kind regards
Tom

Similar Messages

SE30 - Unable to end the measurement (error number 5, Time limit reached)

Hello there,
I wish to perform a complete ABAP trace using SE30 for a program running for 4 hours. The system is R/3 4.6C.
However I got the error message below once I clicked "Back" button or F3 when the program finished after 4 hours.
Please note that ST12 is not available in the system I logged on.
=============================================================
Error message:
"Unable to end the measurement (error number 5, Time limit reached)
Message no. S7 068"
Meas. type           Fully aggregated
Session type         In current session
Status               Time limit reached
Error message text   Time limit exceeded. LIMIT: 1800000000, ELAPSED TIME: 1800957266
File user            XXX
User                 XXX
File ID              ATRAFILE
Release              46C
Version              6
Operating system     HP-UX
Number of processors ???
=============================================================
The ABAP trace results only managed to capture the first 45 minutes of the ABAP calls (due to timeout i think). I would need the whole and complete ABAP trace result for 4 hours, NOT the first 45 minutes. Is there any setting in SE30 can be set for this purpose? Note that there is no ABAP error for the program I traced.
The following link didn't answer my question as well. Hope you can provide clue in this case.
http://help.sap.com/saphelp_nw70/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
Runtime analysis, SE30, ERROR
Thanks,
KP

Hi Kim,
The Limit is expliced on the Doc.
http://help.sap.com/saphelp_nw70/helpdata/en/4d/4e2f37d7e21274e10000009b38f839/frameset.htm
It's 4293 Actually and you set it on SE30 by change the Measurement Restrictions, tab Duration/Type.
regards.

Runtime error(Time limit exceeds)after executing select query

Dear experts, whenever i executing the select query in this zprogram i am getting runtime error that time limit exceeds.i am using inner join and into table.after that also i am geetting error. how can i resolve it??
SELECT LIKP~VBELN LIKP~WADAT_IST LIKP~VEHICLE_NO LIKP~TRNAME
          LIKP~VEHI_TYPE LIKP~LR_NO LIKP~ANZPK LIKP~W_BILL_NO
          LIKP~SEALNO1                                       " Seal NO1
          LIKP~SEALNO2                                       " Seal NO2
          LIPS~LFIMG
          VBRP~VBELN VBRP~VGBEL VBRP~MATNR VBRP~AUBEL VBRP~FKIMG
          VBAK~AUART
          VBRK~FKART VBRK~KNUMV VBRK~FKSTO
          FROM LIKP INNER JOIN LIPS ON LIKP~VBELN EQ LIPS~VBELN
                    INNER JOIN VBRP ON LIKP~VBELN EQ VBRP~VGBEL
                    INNER JOIN VBAK ON VBRP~AUBEL EQ VBAK~VBELN
                    INNER JOIN VBRK ON VBRP~VBELN EQ VBRK~VBELN
          INTO TABLE I_FINAL_TEMP
          WHERE LIKP~VSTEL = '5100' AND
             LIKP~WADAT_IST IN S_WADAT AND
                VBRP~AUBEL IN S_AUBEL AND
                VBAK~AUART IN ('ZJOB','ZOR') AND
                VBRK~FKART IN S_FKART AND
*               VBRK~FKART IN ('ZF8','ZF2','ZS1') AND
                VBRK~FKSTO NE 'X'.
When I am debugging the select query.the cursor will not go to next step.after 15-20 minutes i am getting runtime error(time limit exceeds).
how can i resolve it for that scenario??

Looks like whole SD flow you trying to fetch in single query
First you check the database statistic of these table are upto date in system ( Check with basis team )
if this query was working fine earlier.
Most of table involved are huge volume tables which queried with any primary key
Any secondary index on created for LIKP on VSTEL WADET ?
My suggestion would be split the selection queries and make use of primary or existing secondary index to fetch the desired result if possible. For testing purpose split the queries and find which is taking more time and which needs index by taking squel trace in ST05.
Also take ST05 trace of this query in debugger ( New debugger -> special tool -> trace > ST05/SE30)

Error while executing a report : Time limit exceeded

Hello Experts,
i have executed a report and it took long time and finally throw an error saying that time limit is exceeded ,
please suggest how to resolve the problem
Thanks in Advance
Nitya

Hi Nitya H,
There are many resons behind Time out issue.
It is better to find where exaclty, our report is taking more time.
Below are the some of the bottle necks we need to monitor for time out issue:
1) OLAP query generation time.
2) F4 Search time.
3) Read Cache.
4) Write Cache.
Above features we can monitor @ RSRT transaction.
If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
For F4 search ,keep mater data as data retrival target.
For Read Cache and Write Cache increase the query memory @ RSRT.
Plse check the report and let me know if there is other bottle necks for query execution....
_Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
Hope this may helps you...
Cheers,
Maruthi

RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded. Connection Pool - JCO api

Hi Everyone
My Connection Pool parameters JCO api.
client=300
user=SISGERAL_RFC
passwd=******
ashost=14.29.3.120
sysnr=00
size=10
I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
1.
2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
2.
2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
Id like to know if is happening.
Are there something wrong with my connection pool?
What can be happening?
Thanks

Raghu,
Thanks for your response.
Yes, the pool connections are in place according to the sAP note mentioned above.
Regards,
Faisal

How can I get back the 15 minute time limit when making an iTunes purchase with out having to put in password again and again?

HHow can I get the 15 minute time limit back instead of putting in iTunes password on every purchase?

Settings > General > Restrictions > Require Password (Password Settings on iOS 8)

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Error while running query "time limit exceeding"

while running a query getting error "time limit exceeding".plz help.

hi devi,
use the following links
queries taking long time to run
Query taking too long
with hopes
Raja Singh

TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.

Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas

Time Limit exceeded while running in RSA3

Hi BW Experts,
I am trying to pull 1 lakh data from CRM to BI System.
Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
Pls suggest, why it is happening like this.
Thanks in advance.
Thanks,
Ram.

Hi,
because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a time then u can discuss with ur basis people to extend the time for that.
Thanks & Regards
sathish

Time limit exceeded error

Hello All,
I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
Regards,
Arpita.
Moderator message: Welcome to SCN!
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 20, 2011 2:01 PM

Hi Ramya,
Your prog running in the back ground, so the time limit of the prog is exceded. Go to sm37 see the prog running time if exceded correct the time.
Regards
Srinu

Time Limit exceeded error in R & R queue

Hi,
We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
Any pointers on this would be of great help.
Thanks in advance,
Regards,
Rasmi.

Hi Rasmi
I suppose that the usual answer would be to increase the timeout for the R&R queue.
We have increased the timeout on ours to 60 mins and that takes care of just about everything.
The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time
If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
Regards
James

Time Limit exceeded error in ALV report

I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag.

Time Limit Exceeded while executing Proxy Program

Hi all,
we are frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
Thanks,
Mayank

hi Joerg,
we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
Thanks,
Mayank

Time Limit exceeded Error while updating huge number of records in MARC

Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender
Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender

Hi Raju,
Use the following routine to get fiscal year/period using calday.
*Data definition:
DATA: l_Arg1 TYPE RSFISCPER ,
      l_Arg2 TYPE RSFO_DATE ,
      l_Arg3 TYPE T009B-PERIV .
*Calculation:
l_Arg2 = TRAN_STRUCTURE-POST_DATE. (<b> This is the date that u have to give</b>)
l_Arg3 = 'V3'.
CALL METHOD CL_RSAR_FUNCTION=>DATE_FISCPER(
EXPORTING I_DATE = l_Arg2
            I_PER = l_Arg3
IMPORTING E_FISCPER = l_Arg1 ).
RESULT = l_Arg1 .
Hope it will sove ur problem....!
Please Assign points.......
Best Regards,
SG

Time Limit in SE30

Similar Messages

Maybe you are looking for