RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded. Connection Pool - JCO api

Hi Everyone
My Connection  Pool parameters JCO api.
client=300
user=SISGERAL_RFC
passwd=******
ashost=14.29.3.120
sysnr=00
size=10
I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
1.
2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
2.
2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
I’d like to know if is happening.
Are there something wrong with my connection pool?
What can be happening?
Thanks

Raghu,
Thanks for your response.
Yes, the pool connections are in place according to the sAP note mentioned above.
Regards,
Faisal

Similar Messages

  • SMQ2 Time limit exceeded

    Hi Experts,
    IDOC to IDOC Scenarion--There are some entries in SMQ2 are showing "time limit exceeded". i tried to unlok the Queue every time i get the error and after that queue is going into Running status for some time and again it is giving the same error and status is "SYSFAIL". Queue registration is also done.we are facing this problem in production.
    All other interfaces messages are processing fine except for one interface. some IDocs are processed even for the same interface. I assumed that the size of the message is large. so it is not processing, mapping step is not executed.
    see the example below for one message which is not processed from XI
    <SAP:MessageSizePayload>467228</SAP:MessageSizePayload>
    <SAP:MessageSizeTotal>479041</SAP:MessageSizeTotal>
    <SAP:PayloadSizeRequest>467228</SAP:PayloadSizeRequest>
    We have restarted the complete XI server after Kernal upgrade and after that we are getting this problem, can any body give me the suggestion how can we solve the problem.

    Hi
    The size of the messages also not huge, we have tested it testing system and it is taking less than one minute to process the message. And we have checked at the Gate way & JCO connections are working fine. The problem is still there as i explained in my first post.
    Every time it is giving time limit exceeded after unlocking the Queue.
    Is there any other suggestions to resolve this issue.
    Thanks in Advance
    Neeru
    Edited by: neeru on Mar 3, 2010 2:57 PM

  • Message getting stuck in XBQO queue - Time limit exceeded

    Hi All,
    We have a BPM scenario in our project (on PI 7.0 SP18), where bundle of PEXR2002 Payment IDocs are received as a single flat file. This file is then consumed by the BPM, to split the message into multiple payments using Java Mapping.
    However, when we get an IDoc file of size greater than 5 MB (more than 500 IDocs), the message gets stuck in XBQO queue and eventually giving a SYSFAIL with the message "Time limit exceeded". Could you please let us know if you have encountered a similar issue and are aware of a possible solution.
    Any pointers to this will be really appreciated.
    Thanks & Regards,
    ROSIE SASIDHARAN

    H Rosie,
    1)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  EO_MSG_SIZE_LIMIT->possible values 0 - 2,097,151 (KB)
    The parameter EO_MSG_SIZE_LIMIT enables serial processing of messages of a particular size. This applies for messages with the quality of service Exactly Once (EO). If the message is larger than the parameter value, the message is processed in a separate queue.
    2)  Goto SXMB_ADM-> Integration Engine Configuration->Parameter  HTTP_TIMEOUT->possible values n Seconds, where n is a whole number.
    The parameter Specifies the timeout for HTTP connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
      See SAP Note 335162  for sysfail issue....
      Hope these will help u....
    Regds,
    Pinangshuk.

  • Program terminated: Time limit exceeded, ABAP performance, max_wprun_time

    Hi,
    I am running an ABAP program, and I get the following short dump:
    Time limit exceeded. The program has exceeded the maximum permitted runtime and has therefore been terminated. After a certain time, the program terminates to free the work processfor other users who are waiting. This is to stop work processes being blocked for too long by
    - Endless loops (DO, WHILE, ...),
    - Database acceses with large result sets,
    - Database accesses without an apporpriate index (full table scan)
    - database accesses producing an excessively large result set,
    The maximum runtime of a program is set by the profile parameter "rdisp/max_wprun_time". The current setting is 10000 seconds. After this, the system gives the program a second chance. During the first half (>= 10000 seconds), a call that is blocking the work process (such as a long-running SQLstatement) can occur. While the statement is being processed, the database layer will not allow it to be interrupted. However, to stop the program terminating immediately after the statement has been successfully processed, the system gives it another 10000 seconds. Hence the maximum runtime of a program is at least twice the value of the system profile parameter "rdisp/max_wprun_time".
    Last error logged in SAP kernel
    Component............ "NI (network interface)"
    Place................ "SAP-Dispatcher ok1a11cs_P06_00 on host ok1a11e0"
    Version.............. 34
    Error code........... "-6"
    Error text........... "connection to partner broken"
    Description.......... "NiPRead"
    System call.......... "recv"
    Module............... "niuxi.c"
    Line................. 1186
    Long-running programs should be started as background jobs. If this is not possible, you can increase the value of the system profile parameter "rdisp/max_wprun_time".
    Program cannot be started as a background job. We have now identified two options to solve the problem:
    - Increase the value of the system profile parameter "rdisp/max_wprun_time"
    - Improve the performance of the following SELECT statement in the program:
    SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
    INTO CORRESPONDING FIELDS OF TABLE i_ekkn
    FOR ALL ENTRIES IN p_lt_proj
    WHERE ps_psp_pnr = p_lt_proj-pspnr
    AND ps_psp_pnr > 0.
    In EKKN we have 200 000 entries.
    Is there any other options we could try?
    Regards,
    Jarmo

    Thanks for your help, this problem seems to be quite challenging...
    In EKKN we have 200 000 entries. 199 999 entries have value of 00000000 in column ps_psp_pnr, and only one has a value which identifies a WBS element.
    I believe the problem is that there isn't any WBS element in PRPS which has the value of 00000000. I guess that is the reason why EKKN is read sequantially.
    I also tried this one, but it doesn't help at all. Before the SELECT statement is executed, there are 594 entries in internal table p_lt_proj_sel:
      DATA p_lt_proj_sel LIKE p_lt_proj OCCURS 0 WITH HEADER LINE.
      p_lt_proj_sel[] = p_lt_proj[].
      DELETE p_lt_proj_sel WHERE pspnr = 0.
      SORT p_lt_proj_sel by pspnr.
      SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
      INTO CORRESPONDING FIELDS OF TABLE i_ekkn
      FOR ALL ENTRIES IN p_lt_proj_sel
      WHERE ps_psp_pnr = p_lt_proj_sel-pspnr.
    I also checked that the index P in EKKN is active.
    Can I somehow force the optimizer to use the index?
    Regards,
    Jarmo

  • IDoc Tracking: TIME LIMIT EXCEEDED

    Hello!
    We have about 15 different R/3 platforms connected to XI using the IDoc adapter. If I use the IDoc Tracking functionality in IDX5 it usually is working fine and the IDoc number in the receiving system and IDoc status are returned within seconds.
    However, for one R/3 platform it was always taking about 30 minutes until the IDoc number and IDoc status were returned. The status bar displays that the IDOC_DATE_TIME_GET function module is executed.
    Now it runs for over one hour until it stops with a TIME LIMIT EXCEEDED error message and no IDoc numbers and status is returned any more. What needs to be corrected to speed up IDoc tracking for this particular system?
    Regards, Tanja

    Not sure if this would help, but this link speaks of how to bypass time limit exceeded
    http://www.erpgenie.com/abaptips/content/view/490/62/

  • Time Limit Exceeded. JDBC Adapter

    Hello guys,
    we have problem in an interface in production.
    The interface is asynchronous and is File -> PI -> JDBC
    Some messages have sometimes an error in PI monitorization, and we can see the next error:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Grouping
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SYSTEM_DUMP</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>XXXX : XXXX___0000 : Time limit exceeded.</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    It seems there is an error when sending to the JDBC adapter? The concurrency of the adpter is set to 1 and we send 7 messages to the same adapter and the messages are executed more or less at the same time.
    Could we have to do some PI configuration about queues? or maybe is about the concurrency of the adapter?
    Many thanks in advance.
    Regards,
    Xavier.

    You might need to increase MAXIMUM CONCURRENCY > 1 and set poolWaitingTime > 0 as per SAP Note 831162. By doing this will alow JDBC Receiver to process concurrency the request from Integration Engine.
    or you also can try to increase "Recv.maxConsumers" for JDBC Adapter. The current value is 5
    In addition above, since more messages are concurrently happening more or less at the same time, I would recommend also to use this parameter setting.... Go to advanced tab in the jdbc receiver channel.
    check the option "Disconnect from Database After Processing Each message".  This would help if the connection is not immediately return to the other thread after serving the first thread.  Plus it is a best practice to follow up.

  • DNL_CUST_ADDR "SYSFAIL" with time limit exceeded

    Hi Experts,
    i hope you can help here.
    We set up a new connection between a CRM and an ECC.
    Everything worked fine until we started the initial customizing load.
    All customizing objects went through, besides DNL_CUST_ADDR.
    It stopped in the Inbound Queue  of the CRM with error message "Sysfail" in Detail
    "Time limit exceeded".
    The Solution is not note 873918, we implemented it and it still doesn´t
    work.
    Ahead thank you very much.
    Regards
    Matthias Reich

    Hi Matthias,
       You can try any of the following things.
       Before starting the initial load of this object, change the block size in DNL_CUST_ADDR object to 50. Here delete the current queue and reinitiate the load  OR
       If you don't want to delete the existing queue, basis can increase the GUI maximum time. For this they need to change the parameter rdisp/max_wprun_time. You can see the current max time by executing the program RSPARAM. After doing this setting, you can unlock the queue.
    //Bhanu

  • ReadString() get time limit exceed to complete operation error

    I have a device name Time Electronics 5075. I am trying to use the SimpleReadWrite.2010 in National Instruments\NI-488.2\Examples\DotNET4.0\SimpleReadWrite\cs to comunicate with the device.
    I can open the connection and send commands to the device by using this code
    device = new Device((int)boardIdNumericUpDown.Value,(byte)primaryAddressNumericUpDown.Value,(byte)currentSecondaryAddress);
    device.IOTimeout = TimeoutValue.T100s;
    device.Write("X0/A1/F0{13}");
     But I am stuck at 
    stringReadTextBox.Text = device.ReadString();
    I get the error "Time limit exceeded to complete operation."
    I don't know exactly should I add 
    device.Write("T/D{13}");
    before the device.ReadString() or not. But I get the same error for both cases.
    Some info: Visual Studio 2010, Measurement Studio 2013, NI.488.2, Windows 7 Pro
    Any idea?

    Thank you Curt_C,
    I have attached the screen capture of NI IO Trace. I just open the session, send two commands T\n and D\n to the device and readstring. The red one are errors on reading. The last one is close session.
    I think \n is the correct terminator. It works with most of commands, just get stuck with ReadString.
    Kind regards,
    Thang
    PS: I also attached GPIB Interface Properties for more info
    Attachments:
    NI IO Trace_01.png ‏54 KB
    GPIB Interface Properties.png ‏54 KB

  • Short dump "Time limit exceeded" when searching for Business Transactions

    Hello Experts,
    We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
    Number of Records:
    CRMD_ORDERADM_H: 5,115,675
    CRMD_ORDER_INDEX: 74,615,914
    We have done these so far, but the performance is still either poor or times out.
    1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
    2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
    3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
    4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
    5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
    6. Searched for notes and there are no notes that could help us.
    Any idea what is causing this issue and what we can do to resolve this?
    Regards,
    Bala

    Hi Michael,
    Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
    The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
    Regards,
    Bala

  • Error while running query "time limit exceeding"

    while running a query getting error "time limit exceeding".plz help.

    hi devi,
    use the following links
    queries taking long time to run
    Query taking too long
    with hopes
    Raja Singh

  • TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

    Hi gurus,
    I Have got an error while executing
    The errors are as follows.
    1.Time limit exceeded. No return of the split processes
    2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
    3.Resource error. No batch process available. Process terminated
    Note: Iam not  executing the DTP as a back ground job.
    As it is of  higher priority the answers Asap Is appreciated.
    Regards
    Amar.

    Hi,
    how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
    In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
    Additional take a look at table RSBATCHPARALLEL and
    http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
    Regards
    Andreas

  • Time Limit exceeded while running in RSA3

    Hi BW Experts,
      I am trying to pull 1 lakh data from CRM to BI System.
    Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
    Pls suggest, why it is happening like this.
    Thanks in advance.
    Thanks,
    Ram.

    Hi,
                because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a  time then u can discuss with ur basis people to extend the time for that.
    Thanks & Regards
    sathish

  • Time limit exceeded error

    Hello All,
    I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
    I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
    Regards,
    Arpita.
    Moderator message: Welcome to SCN!
    Moderator message: Please Read before Posting in the Performance and Tuning Forum
    Edited by: Thomas Zloch on Oct 20, 2011 2:01 PM

    Hi Ramya,
       Your prog running in the back ground, so the time limit of the prog is exceded.  Go to sm37 see the prog running time if exceded correct the time.
    Regards
    Srinu

  • Time Limit exceeded error in R & R queue

    Hi,
    We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
    The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
    Any pointers on this would be of great help.
    Thanks in advance,
    Regards,
    Rasmi.

    Hi Rasmi
    I suppose that the usual answer would be to increase the timeout for the R&R queue.
    We have increased the timeout on ours to 60 mins and that takes care of just about everything.
    The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time 
    If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
    Regards
    James

  • Time Limit exceeded error in ALV report

    I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

    You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
    You may need to re-check your query...And also, review the alv catalog and any events you are using....
    Greetings,
    Blag.

Maybe you are looking for