Time Machine issue since 10.5.1 upgrade

Ok, so a lot have people i've read have been having issues with Time Machine since day 1, however it's always worked fine for me.
Today, I upgraded to 10.5.1 via software update and now i've received an error message from Time Machine which states that my TM hard drive is read only. I check this by using get info and for me as the current user (with Admin rights) it's saying read/write.
Any ideas?

Quick update.
So Ejected and then mounted my hard drive again, went into System Preferences>Time Machine turned off Time Machine and then chose the change disk option. I selected the same disk that had problems previously and then waited for the next scheduled backup to take place. I've just checked and the backup has now taken place without any issues or errors.
My drive is an iomega model by the way, the one that looks similar to the PowerMac casing and is 640GB in size. Partitioned in to 3 with one being allocated to TM.
I'll repost if I encounter any problems again but would suggest others try what I did to rectify the problem. It won't solve all problems but may help out others experiencing the same symptom as me.

Similar Messages

  • Time machine issue: always full backup after upgrade to Mavericks

    I just upgraded to OS X Mavericks - since then, each Time Machine backup is a full back (Instead of just backing up the differential between backups) - I couldnt find the answer on the web, pls help! Thanks

    Claude Crider wrote:
    You say you think indexing is now done. Is that because everything else seems to be working with no delays?
    Because you said "The CPUs stayed maxed and machine hot for about 3 more hours." That sound like it was done indexing your internal HD.
    To be sure, look at the Spotlight index at the right of your menubar.  If it has a tiny dot inside it, it's indexing something.  Click it to see what.  If not, it's caught up.
    Oddly, the indexing of your backups may or may not appear there.
    And when you say leave it for awhile, are you thinking more like 4 hours? or more like maybe 20 hours?
    It depends on how large your backups are, and how you're connected.  Ethernet will be faster than WiFI, of course, but will still take a while.  The indexing may be done at the beginning of the backup, during it, or after it seems to be done (if the backup says it's done, but it doesn't eject the Time Machine Backups disk image, it's probably still being indexed).
    I'd guess a few hours, again depending on how large your backups are.
    At what point should I give up on it?
    When you run out of patience?

  • Time Machine issues since adding external drive

    System spec:
    2012 Mac Mini, quad core 2.3ghz i7, 16gb RAM, OS X Yosemite 10.10.2
    Problem:
    Today I added an external USB 3.0 1TB hard drive to my Mac Mini - a self powered Seagate one. I want Time Machine (running on another external drive - a mains powered 2TB USB 2.0 Western Digital drive) to back this drive up - so I went into the Time Machine preferences pane and removed the drive from the exclusions list to which it had automatically been added (since TM doesn't usually back up external drives)
    I moved some data to the drive and Time Machine began to back this up as expected on it's next run. I went to check the TM drive in Finder to make sure it was backing up correctly when I noticed that the folder for this latest backup wasn't appearing - and that the Latest link went to the backup BEFORE the drive was installed. Both Finder and the Time Machine pref pane correctly showed the TM drive space dropping though - and if I went to Terminal and listed the contents of the Time Machine drive, the folder for the current backup appeared and Latest pointed to it as expected.
    I let this backup and a second backup finish - so at this point I have two backups that have run since adding the external drive. The backups appear in the navigator on the right hand side - but they are greyed out compared to the others. If you try to click on one of these greyed out backups, TM scrolls back to an empty Finder window titled "Waiting: ...." and the time the backup ran.
    I tried rebooting to fix this - when I checked again after rebooting, Time Machine showed the two backups and both were accessible and navigable within the TM restore interface. This was four hours ago. Three more backups have run since my reboot and they are exhibiting the same symptoms as the ones prior - not showing in Finder, not linked from Latest, and greyed out in the TM restore interface.
    While I'm fairly confident the data IS being backed up, this is still going to be a problem if I need to restore. Has anyone seen this before and how did you fix it if so?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

    Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

    Welcome to Apple Communities
    Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

  • Time machine issue after Yosemite install

    After performing a clean install of Yosemite and migration from my TimeMachine backup I experienced the following:
    I opened iTunes and selected some music to play, then got a dialog box saying the files could not be found.  Spotlight couldn't find them either... they were just gone.  Naturally I went to my Time Machine backups and was surprised the music was gone from the backups, all the way back to the first backup.  Very wierd.  During the migration I went through the "Cleaning up old backups" process, not sure exactly what this process is.
    I was pretty bummed that I had permanently lost a lot of music, some was recordings of friends playing live that could never be replaced.  I then remembered that some time ago, just for the **** of it, I copied my sparsebundle backups to an external drive and stashed it in a drawer.  I browsed it, and lo and behold there were the missing files.  So I narrowly escaped a big problem, but wy did this happen?  What are they doing over at Apple?

    Hatrabbit wrote:
    Naturally I went to my Time Machine backups and was surprised the music was gone from the backups, all the way back to the first backup.  Very wierd.
    This is really bad luck. And what can be seen here, it is not related to Yosemite but Mavericks, since I asume your backups were made with Mavericks. Though, it is possible that this bug still persists with Yosemite.
    I have a similar problem. I am still on Mavericks. I see missing files in ~/Library/Preferences on a regular basis. When I come aware of it, I fix it manually by excluding Preferences folder from backup, run backup, include folder Preferences and finally backup again. But this fix does not last for long. Suddenly after some weeks I see a again missing files in that folder, when browsing the "Latest" backup.
    I have found some related discussion:
    Time machine missing files
    http://forums.macnn.com/90/mac-os-x/509489/potential-time-machine-issue-maverick s-leaving/
    http://apple.stackexchange.com/questions/130955/some-files-are-gone-after-recove ry-from-time-machine-backup-why/150230
    http://apple.stackexchange.com/questions/136453/time-machine-not-detecting-chang es-in-certain-folders
    https://twitter.com/ThatDJJP/status/526429152153714690
    missing mail after installation
    No solution until today. Very frustrating.
    My feeling is, that many users do not recognize, that they are victim of this horrible bug, cause in most cases only few folders are hit by this bug.
    And now since Yosemite is out, people are actually using there backups for the first time since Mavericks and run into a disaster.
    Atm I am trying to test, if maybe fsevent daemon is the problem, in the past there have been issues like http://openradar.appspot.com/10207999
    I did a check on my drive, and I found issues with realpath()/readdir(). Though, those issues may just be old and have not been detected by me for a very long time. My MBP is 5 years old and I upgraded all the way from 10.5 to 10.6 to 10.9.
    With 10.6 I never had such an issue.
    But more likely, the issue is related to the "Cleaning up old backups" process. Cause I also have the feeling, that when my backup drive gets full and  the shrink process took place, then the result are missing files in younger backups then the ones cleaned. If that is true, then maybe the hard-link-approach of Time Machine is somehow involved.

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • Time Machine issues (16030) sparsebundle" is already in use for Time Capsule backup

    Time Machine issues (16030) sparsebundle” is already in use for Time Capsule backup process.  Just started happeing been using it for over two years.

    First, restart the computer and the Time Capsule. In most of the cases, this solve the problem.
    If it doesn't work, see > http://pondini.org/TM/C12.html

  • Time Machine issues with OS 10.6.8

    Hi all,
    after updating to 10.6.8 I noticed a Time Machine issue.
    Backup takes very long but only a few MB were backed up.
    And after it was finished, Finder crashed and I had to do a hard reset.
    There´s also a "in progress" file on my USB Backup HDD after finishing.
    Checking my HDD´s and repairing it wasn´t the problem.
    Today I tried a new USB HDD to make a fresh Backup via Time Machine.
    After a few hours it was finished, but only 7,8MB were backed up and still there is an "in progress" file on my new Backup HDD.
    Here´s a troubleshoot:
    Starting standard backup
    Backing up to: /Volumes/My Book/Backups.backupdb
    Ownership is disabled on the backup destination volume.  Enabling.
    Backup content size: 368.5 GB excluded items size: 75.7 GB for volume Macintosh HD
    No pre-backup thinning needed: 351.34 GB requested (including padding), 930.54 GB available
    Waiting for index to be ready (101)
    CarbonCore.framework: coreservicesd process died; attempting to reconnect but future use may result in erroneous behavior.
    Copied 7.2 MB of 292.8 GB, 5 of 1058420 items
    Copied 11 files (27.1 MB) from volume Macintosh HD.
    No pre-backup thinning needed: 100.0 MB requested (including padding), 930.52 GB available
    Copied 165 bytes of 0 bytes, 4 of 0 items
    Error: (-36) SrcErr:YES Copying / to (null)
    Copied 7 files (236 bytes) from volume Macintosh HD.
    Error -50 deleting backup: /Volumes/My Book/Backups.backupdb/Computer/2011-07-19-180247.inProgress
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    Can anyone help me?

    A  whole  lot  about  Time  Machine for help with TM problems.  Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM.  See also Mac 101- Time Machine.
    There are two important errors noted in the backup:
    I-O error -36 « fuzzybrain|daisychain|blogdrain
    The following comes from the LaCie web site but is applicable to any other external drives whether home brew or commercial.
    Getting error -50 when copying data in OS X.
    Some LaCie drives ship out formatted FAT32 so they will be ready to use on either a Mac or a PC. If you are getting error -50 when copying to a LaCie drive, or any drive formatted for PC, it is because of the following:
    Certain characters that can be used in a Mac OS X filename are not allowed in MS-DOS filenames. This can prevent the file from being copied, and can occur when a filename contains non-printing ASCII characters, or any of these characters: ? / \ < > " | > *.
    Either copy the data off of the drive and use Apple's Disk Utility to erase the drive in Mac OS Extended format, or change the filenames of the documents that cannot be copied.

  • Time Machine Issues

    Time Machine Issues
    Receiving "Can't connect to a current Time Machine backup disk" error when entering Time Machine
    Hello, there! Austin here. I started receiving this error after I completed my first Time Machine backup. It happens every time I try to enter time machine. Any solutions would be greatly appreciated.

    Time Machine Issues
    Receiving "Can't connect to a current Time Machine backup disk" error when entering Time Machine
    Anyone?

  • Time Machine Issue -- Error not found anywhere

    I am having a Time Machine issue in which the error displayed cannot be found anywhere: Google, Bing, Apple, etc.
    The error message is: "Time Machine couldn't find some of its settings on the backup disk "BACKUP". Make sure the backup disk is connected, and that other connected disks don't use the same name as the backup disk. Last success backup: 6/21/10 at 2:52 PM"
    The other odd thing is that my Time Machine folders are empty. The directory structure is: BACKUP > Backups.backupdb > TIGERMASTER > {empty}. (TIGERMASTER is my MacBook Pro's name.)
    When I do a Get Info on the directories, it reports Zero kb on disk with 0 items. When I do a Get Info on BACKUP, it reports 833GB used, with about 140GB free (it's a 1TB external HDD).
    Disk Utility sees folders and files, however: "Number of Folders:583,061 / Number of Files:3,725,350"
    Um, help?!
    My Mac's Info:
    *Model Name: MacBook Pro*
    *Model Identifier: MacBookPro3,1*
    *Processor Name: Intel Core 2 Duo*
    *Processor Speed: 2.4 GHz*
    *Number Of Processors: 1*
    *Total Number Of Cores: 2*
    *L2 Cache: 4 MB*
    *Memory: 4 GB*
    *OS: 10.6.4*
    *Ext. HDD: LaCie 1TB*

    Here are the last few lines of the error output. The entire output was laden with red text, which indicates errors:
    +Invalid node structure+
    +Invalid record count+
    +Rechecking volume.+
    +Checking Journaled HFS Plus volume.+
    +Invalid node structure+
    +The volume could not be verified completely.+
    +Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.+
    The most common output error (there must have been over a hundred) looked like these:
    +Overlapped extent allocation (id = 10715055, /.HFS+ Private Directory Data+
    +/dir_10712993/Mobile Backups/8884195JY7H/Structured/4eea38a1ac5f110bcb3d0a10ce4d571300ab85aa.mddata) +
    +Overlapped extent allocation (id = 10715056, /.HFS+ Private Directory Data+
    +/dir_10712993/Mobile Backups/8884195JY7H/Structured/4eea38a1ac5f110bcb3d0a10ce4d571300ab85aa.mdinfo) +
    +Overlapped extent allocation (id = 10715057, /.HFS+ Private Directory Data+
    +/dir_10712993/Mobile Backups/8884195JY7H/Structured/4f01e5e3411040bbec70277a704bfeb5b735d336.mddata) +
    +Overlapped extent allocation (id = 10715058, /.HFS+ Private Directory Data+
    +/dir_10712993/Mobile Backups/8884195JY7H/Structured/4f01e5e3411040bbec70277a704bfeb5b735d336.mdinfo) +
    I tried to mount the disk, but it gives me the error: "The disk BACKUP could not be mounted. Try First Aid on the disk and then retry mounting." Of course, I can't back up any of the files because I can't mount the disk.

  • After upgrading my iPhone, I lost all my contacts..... and they were replaced with my wife's contacts even though she upgraded after I did. I did a time machine backup before I started the upgrade process, how do I get that saved data back to my phone?

    After upgrading my iPhone, I lost all my contacts and they were replaced with my wife's contacts even though she upgraded after I did. I did a time machine backup before I started the upgrade process, how do I get that saved data back to my phone?

    Hi bluegrandpanash,
    Thanks for visiting Apple Support Communities.
    If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Best Regards,
    Jeremy

  • Can't access Time Machine files since upgrading to Mavericks

    I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found.  I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade.  The issue I'm having is that I can't access the backed-up files in any way. 
    When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc".  It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning).  If it wasn't writing to the disc, it would have showed me an error of some sort.
    What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend.  I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it.  Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
    If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

    Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
    I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
    I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
    I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
    My present Mac,  a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
    However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
    I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
    Message was edited by: briinoz

  • Time machine issues after HD upgrade

    I replaced and upgraded my internal HD today in my MacBook Pro (OSX 10.6.5). I restored OSX from my time machine backup to this new drive.
    However, when I next tried to run Time Machine, it tried to back everything up on the new drive, which is about 150Gb of data. Is there any way to avoid doing this and just have time machine back up the files that have actually changed since the last backup? It seems a senseless waste of space on my backup HD to have essentially two copies of everything on my HD...

    For Time Machine it is essentially a completely changed version of your old HDD, so it does backup the changes. Only that everything changed.
    One solution is to let it back it all up and let it delete older backups when it needs more space and the other is to delete the existing backup and save some disk space...

  • My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

    My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject.  I was using a cord that went from larger square plug to larger square plug.  So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

    Thanks, Michael!  I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed.   Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
    Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk.  Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait.  :-) 
    Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed? 
    I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest?  Two external hard drives?  I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB.  If this one is not reparable I could get two and do the same thing.  I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
    What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

  • HT3275 Conflict btw Time Machine & Time Machine Editor since upgrade to OS X 10.9.1.  N Backups since December!! Genius bar have tried to fix but .... How do I fix this?

    Software on my MAC updated to OS X 10.9.1 late December.  Since then Time Machine and Time Machine Editor have been in conflict resulting in no backups! I constantly receive alerts to that effect.  I had also set this to backup once a day instead of every hour, now I don't seem to have that option. Genius Bar people were very helpful but whatever they did has not fixed the issue. Would greatly appreciate assistance with this problem. Thanks in advance! 

    The current information from the Time Machine Editor folks is that it will support Lion (10.7.x) and Mountain Lion (10.8.x), but there is no mention of support for Mavericks (10.9.x).
    TimeMachineEditor - Time Software - Free
    If you contact the support folks at Time Software, they will likely tell you that they cannot offer support for problems related to Mavericks.
    If that is the case, ask them for the steps to safely uninstall Time Machine Editor so that it will hopefully not conflict with the operating system in Mavericks.
    Worst case, as LaPastenague mentions, you may need to re-install Mavericks again on your Mac to get Time Machine working again....since it appears that the Editor does modify some of the files in the Mac operating system.

Maybe you are looking for