Time machine: remote backup from internet to my Time Capsule

Hi,
I don't know how configure my TC and my icluod account in order to have backup of my mac on TC by internet. In my local network all is working fine but from internet I can access to my time capsule but when I try to backup there is a error message: backup disk is not available.
Do you have any idea?
tnx

before I was able to do it...after remove of TC (iCloud version) by TM I cannot
There might be a very good reason for it.
Try using it without iCloud.. link directly to the TC using AFP over internet.
See example here for how to setup with TC behind a router.
http://gigaom.com/2009/05/14/access-your-time-capsule-over-the-internet/
Even easier if the TC is the main router.. just turn on wan access for AFP.
But you are going to need to run a computer to locate the TC via dyndns if you don't pay the extra for static IP from your ISP.

Similar Messages

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

How to save SOME time machine Mac backups from the TM disk to other disk WITHOUT formatting the destination disk?

Hi,
How to save SOME time machine Mac backups from the TM disk to other disk WITHOUT formatting the destination disk?
I have a Time Machine disk (A) including the backups of several different Macs (B, C, D & E) generated with an old Mac OS X 10.5.8 (iMac PowerPC) over the years.
I have transferred the old Mac contents to a new Mac with OS X 10.8.3 using Migration Assitant. All OK.
Now, I want to erase such TM disk A to use if for other purposes, but first, I would like to RECOVER the backups of some Macs inside it (D and E). Is that possible WITHOUT formatting the destination disk and selecting only some Macs from the TM disk and not the fulll TM disk? How?
Thanks.

Thanks for the reply. I do not think that is messy, anway. I simply used the same external disk as Time Machine disk for different Macs. And that worked OK all the time for years.
The ExternalTimeMachineDisk contains the folder Backups.backupdb
which contains the following folders (each one corresponding to the Time Machine backup made from each Mac):
Mac1
Mac2
MacBook1
MacBook2
In relation to my message above, is it possible to select specific files, folders or full Mac backups from such Time Machine disk and save them to other disk? How?
Thanks.

Time Machine deleting backups from several months ago (but not the oldest)?

During its "Cleanup" phase, Time Machine has recently been deleting backups from several months ago—even though these aren't the oldest backups, and my backup drive isn't full.
My backups go back to January 2012, yet just today, Time Machine deleted backups from May 21, June 11, July 2, and July 23 (all in 2012). And plus, my Time Machine drive still has 200 GB free.
Why's it doing this? Shouldn't it just either delete my backups from January 2012 first (if it needs the space), or just delete the expired backups in the past 24 hours or 30 days (based on its normal rules)?

See Pondini's TM FAQs for starters.

Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!

Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!
I've been searching for weeks for a solution to my problem. Here's the story I've come across since I installed Leopard on Oct. 26, 2007.
I first installed Leopard on my Early 2006 MacBook and set up Time Machine with a 200GB external FireWire drive. Since then, things have been fine, until Time Machine started deleting the oldest backups. I'm a pack-rat and hated this feeling of losing data. So, I now have a few months worth of backups on my 200GB FireWire drive.
The Time Capsule is released, I finally talk myself into getting one and transferring my old data from the 200GB drive to my 1TB TC.
I did some researching through forums about how to move data from one Time Machine drive to another, so I took the concept and wanted to apply it to my Time Capsule. I made a DMG image of my 200GB drive, in order to move the data. I figured if I can make an image, copy it, and open it on the Time Capsule - all will go smoothly - just as some had mentioned they've done with external drives.
Now, I have a 164GB DMG image of my Time Machine, with no hope in sight of gaining it back. I've tried taking the image, using Disk Utility, and restoring my original 200GB external with the imaged Time Machine data, but whenever I do, I come across error messages.
In Disk Utility, I've done the following steps:
* Disk Image is found on Time Capsule
* I select the 200GB drive and select 'Restore'
* I drag and drop the Disk Image to the 'Image' field
* I drag and drop the 200GB drive into the the 'Restore' field
* Select 'Erase Destination'
* Select 'Restore'
* I get the warning message that I'll erase the drive - I proceed
* I enter my password
Error message pops up:
"Restore Failure: Could not find any scan information. The source image needs to be imagescanned/scanned for restore."
I select the image in Disk Utility, then proceed with the following steps:
* Click on "Image" then down to "Scan Image for Restore"
* I enter my password
After hours of waiting, I get another error message:
"Unable to scan. (Broken pipe)."
I'm going to see, after transferring the DMG to the Time Capsule, if I can drag-and-drop the files from the Time Capsule drive onto the 200GB hard drive.
IF anyone has any more suggestions, please let me know!

32 updates on this Mac since December 2007 - Hardware, software, OS...
They keep coming at about 6 or 7 a month. Some of them I don't care about, but several are essential. 10.5.3 has been seeded to the testers a couple of times and will probably show up in the next few weeks. Jaguar wasn't worth a d*mn until 10.2.6, Panther about 10.3.4, Tiger about 10.4.4 - I'd say we are ahead or on schedule Too bad I can't get Apple to fix Spaces. I wish they'd focus on what I want but I guess some take more time than others.
2007-12-18 00:32:39 -0800: Installed "GarageBand Update" (4.1.1)
2007-12-18 00:32:43 -0800: Installed "QuickTime Broadcaster" (1.5.2)
2007-12-18 00:33:07 -0800: Installed "Security Update 2007-009" (1.0)
2007-12-18 00:33:29 -0800: Installed "QuickTime" (7.3.1)
2007-12-19 09:32:03 -0800: Installed "MacBook MacBook Pro Software Update" (1.1)
2007-12-23 23:57:32 -0800: Installed "Security Update 2007-009" (1.1)
2008-01-16 09:18:07 -0800: Installed "iMovie Update" (7.1.1)
2008-01-16 09:18:14 -0800: Installed "Front Row Update" (2.1.2)
2008-01-16 09:18:45 -0800: Installed "iTunes" (7.6)
2008-01-16 09:19:31 -0800: Installed "QuickTime" (7.4)
2008-01-29 21:33:14 -0800: Installed "Keynote Update" (4.0.2)
2008-01-29 21:33:23 -0800: Installed "Pages Update" (3.0.2)
2008-01-29 21:33:31 -0800: Installed "Numbers Update" (1.0.2)
2008-02-02 01:18:43 -0800: Installed "iWeb Update" (2.0.3)
2008-02-05 20:12:17 -0800: Installed "iPhoto Update" (7.1.2)
2008-02-15 09:03:49 -0800: Installed "iLife Support" (8.2)
2008-02-15 09:04:17 -0800: Installed "QuickTime" (7.4.1)
2008-02-15 09:04:51 -0800: Installed "Leopard Graphics Update" (1.0)
2008-02-19 23:44:37 -0800: Installed "Keyboard Firmware Update" (1.0)
2008-02-25 19:24:33 -0800: Installed "iTunes" (7.6.1)
2008-03-03 17:14:18 -0800: Installed "GarageBand Update" (4.1.2)
2008-03-03 17:14:31 -0800: Installed "iPhoto Update" (7.1.3)
2008-03-12 18:11:36 -0700: Installed "AirPort Utility" (5.3.1)
2008-03-18 10:03:57 -0700: Installed "Safari" (3.1)
2008-03-20 13:00:58 -0700: Installed "Security Update 2008-002" (1.0)
2008-03-20 13:01:04 -0700: Installed "Time Machine and AirPort Updates" (1.0)
2008-03-21 22:49:16 -0700: Installed "Digital Camera RAW Compatibility Update" (2.0)
2008-04-03 00:50:22 -0700: Installed "Front Row Update" (2.1.3)
2008-04-03 00:50:50 -0700: Installed "QuickTime" (7.4.5)
2008-04-03 00:51:58 -0700: Installed "iTunes" (7.6.2)
2008-04-08 17:16:02 -0700: Installed "Keynote Update" (4.0.3)
2008-04-08 17:16:08 -0700: Installed "MacBook Pro EFI Firmware Update" (1.5)

Time Machine with backups from 2 computers

My husband has a new computer (mac_new), he connected the disk with the old computer's TimeMachine backup
(Mac_old)
By mistake, he started a backup for Mac_new, instead of restoring from the Mac_old backup
From Mac_new I can't figure out how to access and restore from the Mac_old backup
It looks like there are two top-level folders containing the two backups. I can see the Mac_old files but can't access them through Time Machine.
Hope someone can help.

Did you open migrate and try?
Does the old Mac still exist..?? If so you do not need the TM backup you can simply use the old Mac directly. Migrate can work with either TM backup or a computer on the network..
BUT you need to be extremely patient.. over wireless it can take days.. to actually index the old backup.. Yosemite is slower than molasses in winter.

Using Time Machine to backup FROM a network drive

Can time machine be configured to backup files that are stored on a network drive? Drive is mounted via SMB.
Thanks
Simon

disconnected wrote:
although it is now capable of backing up TO a network device, there must be a work around.
It will back up to some network drives, but not reliably to one connected to your Airport Extreme, and possibly not your NAS, either. See #2, especially the pink box, in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Possible solution: mount a networked drive as a local volume so that as far as time machine is concerned, it is seen as a local drive. How could one accomplish this?
No such hack has been posted here, and it's doubtful there is one.

Time Machine creates backups from excluded folders. Tried everything

I configured TM to exclude some folders that I do not want it to backup. A few days ago, all of a sudden, it told me that there is not enough space on my backup disk (Airport Extreme with USB hard drive). I found out that it had deleted the old backups and tried to backup also the folders that I excluded.
I already did:
- deleted the entire backup hard disk using disk utility
- deleted TM preferences
- setup TM from scratch
- Moved the excluded folders to other locations and renamed it (added the folders once again to the exclude list after that, of course)
- repaired file permissions
- repaired volume after having started the system from the 10.6. install DVD.
When I start the backup after resetting it, it shows at first a correct amount of data (approx. 90 GB, which fits the real amount of data that I want it to backup). But when it reaches 100% of the 90 GB after several hours, it does not stop: It continuously adds GB by GB to both values "90 GB of 90 GB copied" in the status window. The status bar keeps showing 100%. When I stop the backup manually and look into the sparsebundle, I find all the data that I excluded before in the TM preferenes.
I have no idea what to do now. I tried a new backup setup from scratch already three times.
P.S.: Im not new to OS X and TM. I have used TM for years in 10.5 without any problems. It seems that such problems occur after the upgrade to 10.6. BTW, I did a clean install of SL, not an update from 10.5.

miflo wrote:
In the meantime I fixed the problem by re-installing the Combo update for 10.6.2. It then has been working for a few days.
But today, it deleted all my old backups and then told me that there is not enough space available. It would need approx. 150GB for about 10MB that I have "really" changed on the hard disk.
Since I have upgraded to SL, I only had problems, problems and problems. It's TM, it's the over-all performance, it's the stability of many applications... I cannot understand why Apple has not managed to fix these annoying bugs for so many months. Apple, what's going on there? Are there no researchers available for OSX since everyone is working on the iPhone?
First, you are not talking to Apple here. This is a user-to-user forum.
Second, several million folks are using Snow Leopard without significant problems. Whatever is going wrong on your Mac is not common. It is something in your setup. The fact that loading the "combo" update helped the TM problem is a good indication of that. Apparently, something in your installation of OSX got corrupted. The other problems you mention may have a similar cause.
It's not clear from your first post whether you did verify/repair disk (not permissions) on both your TM and internal HDs. If you didn't, do them both again.
If that doesn't help, I'd recommend reinstalling OSX from your SL disc, applying the "combo" again, then repairing permissions.
Your first post says you did a "clean" install. How did you get your data back onto your system?
The best way will probably be to go back to 10.5. I think it's the only solution that is available yet.
That's your call, of course, and not an easy transition after you've been on SL for a while.

Time Machine same backup size every time

Anyone have any idea why Time Machine would backup the same amount every time? Every hour mine backs up 1.8 GB, unless I've added more than that to my hd.
I only back up the internal drive on my macbook to a 500 GB Time Capsule via wifi (802.11n only, 5GHz). Not that I figured it would make a difference, but it still does it if backed up via ethernet.
I've also noticed that as soon as it completes the backup, it will backup all over again - and not because an hour has passed. I'm not sure if it does this every time (but I think i does), or if it does it more than twice when it happens.
Thanks in advance!

See if the following might give you some ideas as to why...
*_Incremental Backups Seem Too Large!_*
Open the Time Machine Prefs on the Mac in question. How much space does it report you have "Available"? When a backup is initiated how much space does it report you need?
Now, consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
*Events-Based Backups*
Time Machine does not compare file-for-file to see if changes have been made. If it had to rescan every file on your drive before each backup, it would not be able to perform backups as often as it does. Rather, it relies on a process called FSEvents. This is a system log that records changes that occur with all the directories on your Mac. Moving / copying / deleting / & saving files and folders creates events that are recorded in this log. At the beginning of each backup, Time Machine simply looks at this log to determine what has changed since the last backup. [http://arstechnica.com/reviews/os/mac-os-x-10-5.ars/14]
Installing new software, upgrading existing software, or updating Mac OS X system software can create major changes in the structure of your directories. Every one of these changes is recorded by the OS as an event. Time Machine will backup every file that has an event associated with it since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or a subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups. Time Machine will attempt to backup any hard disk attached to your Mac, including secondary internal drives, that have not been added to Time Machines Exclusion list.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude its’ own backup disk by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule/AirDisk users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Preferences “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*Recovering Backup Space*
If you have discovered that large unwanted files have been backed up, you can use the Time Machine “time travel” interface to recovered some of that space.
Launch Time Machine from the Dock icon.
Initially, you are presented with a window that represents “Today (Now)”. DO NOT make changes to file while you see “Today (Now)” at the bottom of the screen.
Click on the window just behind “Today (Now)”. This represents the last successful backup and should display the date and time of this backup at the bottom of the screen.
Now, navigate to where the unwanted file resides.
Highlight the file and click the Actions menu (Gear icon) from the toolbar.
Select “Delete all backups of <this file>”.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if this resolved your issue.
Cheers!

Lose internet when time machine starts backup

Title says it all. I lose internet connectivity (wireless) when time machine starts. If I turn airport on and off from the taskbar, it works and the backup completes itself.

Me too!
It used to work just fine, but ever since I upgraded to snow leopard, I was having these intermittent internet outages, and it was driving me crazy. I finally realized it was happening every time Time Machine would start up. I turned Time Machine off, and now my internet works just fine. But this is obviously not an ideal solution. I'm glad to see I'm not alone.
Anyone else having this problem??

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Time Machine "preparing backup" eternally upon wake from sleep

at a bit of a loss here...
iMac 24" (version which offered 7300GT as BTO option)
10.5.5 with all updates applied
LaCie 500 gig USB 2.0 drive directly attached.
Up until about two months ago, Time machine functioned fined. Then for some reason, the following started to happen. (no known reason, no software update related etc, that I know of)
scenario... Time Machine functions correctly EXCEPT when waking from sleep. If iMac wakes from sleep and attempts a backup immediately (e.g. more than one hour has passed), it gets stuck "preparing backup" forever. I've let it run overnight (actually as long as about 30 hours), it never stops. Finder and other programs become extremely non-responsive, machine is almost unusable. Literally, the only way out is to manually shut down external drive, with attendant warnings/errors.
What I've done:
1) deleted the time machine .plist file
2) erased, repartioned (as a single partition) external drive
3) started brand new time machine backup (takes about three hours)
At this point, time machine will backup up fine... I can force a successful backup, if I leave the machine running, at one hour it does a successful backup.
BUT, as soon as it goes to sleep, time machine is hosed.
The only workable method for using time machine is to turn the external drive and time machine off when not using it, and turn the whole shootin' match on to do what essentially becomes manual backups. These backup are fairly lengthy, as time machine also does lengthy "preparing backup", but they complete in about 30 minutes to one hour.
Given that time machine doesn't give mountable/cloneable backup, I'm probably going to go back to Carbon Copy Cloner. Still, I like the ease/regularity of Time Machine, and would use it if it works.
Any ideas?
thanks

It could be a number of things. There are lots of things that Time Machine does in order to "manage" backups -- apart from just copying data to the backup drive.
It has to manage the transition of hourly backups into daily backups and must also transition daily backups into weekly backups. Each time it does this it has to move a lot of data around. It also has to maintain indexes of everything so you can quickly find backups should you want to perform a restore.
I've also noticed that there are circumstances that can cause TM to question whether it can trust it's existing backup database... I've caught Time Machine saying that it needs to do a "deep traversal" of the backup (basically it wants to check and see what it really has) and this can take a very long time.
Still... 30 hours is an extremely long amount of time. I'm almost wondering if there's a problem with either your USB bus or your drive when they wake up such that you may be getting a huge number of retries on something that should have happened quickly.
I'd suggest you start the "Console" utility, select "All Messages" at the left, and then watch the messages being written to your log file. Not only does Time Machine log all of it's progress messages to the system.log (in more detail than you'd see in the Time Machine UI), but so do lots of other system processes. If you're getting USB bus problems the error messages would likely show up in the same log. I'm especially suspicious about non-TM related causes since you said you've already blown away your TM backups & preferences and started from scratch and you're still getting the problem.
Try re-creating your problem with the Console log messages being displayed and see if you can't see something in the log that would let you get a little closer to the root cause.
Regards,
Tim

Where did this backup window come from on my desktop. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help

where did this backup window come from on my desktop. It specifies personal data & settings and tells me when the next backup is scheduled [which I never set up]. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help

To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

Time Machine nuking backups, starting from scratch!

ok, i just received this warning:
and now i't doing a backup that is slated to take more than "several hours."
is this common? how often can i expect this?

Hello,
Should you click “Start New Backup”? Not yet! If you see the dialog above, your existing Time Machine backup is corrupt, and you might not be able to recover data from it. But you can save a copy of the corrupt bundle and, perhaps, extract some data from it if needed.
Ask yourself if Time Machine has saved data you might need before deciding what to do next:
If you are sure you won’t need anything backed up before today, click “Start New Backup” and let Time Machine do its thing.
Otherwise, click “Back Up Later” and save a copy before letting Time Machine start a new backup. Just look for a file called “computername.sparsebundle” (for network backups) or “Backups.backupdb” (for local ones) and create a copy with a different name. You can open sparsebundle files with DiskImageMounter and browse them like any other disk. More information is available here.
There you go. If you click “Start New Backup” when you see this dialog box, Time Machine will erase all of your old backup data and start a new bundle. It won’t be corrupt, but it will be empty.
Note that you can manually initiate a Time Machine backup integrity check by option-clicking the “Time Machine” icon in the menu bar and selecting “Verify Backups.”
http://blog.fosketts.net/2010/08/11/time-machine-completed-verification-backups- improve-reliability-time-machine-create-backup/
According to This Time Machine resource “This appears only on Snow Leopard, and started with the Time Capsule Backup Update 1.0 in mid-May of 2010. It also seems to have been included in the 10.6.3 v1.1 update and 10.6.4.”
So, what can you do about it? Grin and bear it, it seems, until Apple fixes it.
One thing you can do to make the backup take less time is to connect your machine to your Time Capsule or other backup drive via Ethernet for the duration of the initial backup.
http://www.theinternetpatrol.com/the-dreaded-time-machine-has-completed-a-verifi cation-of-your-backups-to-improve-reliability-time-machine-must-create-a-new-bac kup-for-you-message-and-why-you-are-seeing-it/
Time Machine: About "Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."...
http://support.apple.com/kb/HT4076

HT201250 (1) Where is the "Time Machine menu" and the choice to "Enter Time Machine" (mentioned in the "Restoring data from Time Machine backups" section)?

1) Where do I find the "Time Machine menu" and the choice to "Enter Time Machine" (as mentioned in the "Restoring data from Time Machine backups" section in the Mac Support article "Mac Basics: Time Machine")?
2) How would I restore e.g. a particular photo from a backup I made with Time Machine? I can see how this is done with Word documents, but can't see how to do it with photos?

Welcome to Apple Support Communities
1. The Time Machine icon is on the menu bar.
2. If you want to do that with individual photos, it's the same way as for documents. If you want to do it with iPhoto, you have to restore the whole iPhoto library, not only one photo

Time machine: remote backup from internet to my Time Capsule

Similar Messages

Maybe you are looking for