TIME_OUT when accessing Oracle table from SAP using native SQL

Hi,
I have a problem in one of my native SQL statement. It takes a long time accessing the table considering that the number of records to be retrieved is only small.
Something happened on the Oracle system. But, stilll to be confirmed. Looking further at the issue, it seems that when the value in the where clause equated is a literal (meaning the value is not declared in DATA or CONSTANTS in the ABAP Program)
Example
1.
EXEC.
WHERE FIELD = '1'
ENDEXEC.
instead of
2.
CONSTANTS: c_1 value '1'.
EXEC.
WHERE FIELD = c_1
ENDEXEC.
i found that when the way of coding is same as Example 1, a time-out error occurs. But when in Example 2, no issue.
Can someone explain this?
Thanks!

Repetitively asking the same question again and again is against the forum rules.
Please post an explain of the SQL statement on the remote machine.
Markus

Similar Messages

Regarding Native SQL to access Oracle Data from SAP

Dear Gurus,
This query is regarding Native SQL.
Our database is Oracle and the client's database is also Oracle.
To access the data directly from the client's database(Oracle), can I use Native SQL commands?
Is there any disadvantage to use Native SQL?
If Native SQL can be used, can any one send me the code to access the data from Oracle?
Points will be rewarded.
Thanks & Regards,
Neeraj K.

The problem is always data integrity. Doing things this way you are bypassing any business logic. So for example if you are connecting to a SAP Oracle database. SAP will not support your SAP system as you are doing direct updates to the database. I would suppose that this would be the same for any other product using the Oracle database. If you are only reading data from the database then it should be fine. I would however always using API's to access/update data.
Regards

How to get oracle 9i blob column into an itab in sap using Native SQL

Hi ,
We are using SAP ECC 5.0 and we need to coonect to an oracle database ver 9i rel2.
We need to get the data stored in a blob(pdf/jpeg) into an itab and later
use it for futher processing.
I am familiar with using native SQL and I wrote a stored procedure in the non sap oracle database to send the blob info into an internal table in sap.
But the information is in hex format and the long raw of SAP does not handle this very well.
Plz see my code below.
data: itab_insp_drawing like zpicture_cluster(which is of type lraw - 7902 )
 occurs 100 with header line.
EXEC SQL.
 EXECUTE PROCEDURE
 proc_get_insp_drawings (
 IN :itab-aq_id,
 IN :itab-section_id,
 IN :t_in_position,
 out :itab_insp_drawing-picture,
 OUT :t_blob_length,
 out :t_out_position,
 OUT :t_status )
 ENDEXEC.
append itab_insp_drawing.
while t_out_position < t_blob_length.
 EXEC SQL.
 EXECUTE PROCEDURE
 proc_get_insp_drawings (
 IN :itab-aq_id,
 IN :itab-section_id,
 IN :t_in_position,
 out :itab_insp_drawing-picture,
 OUT :t_blob_length,
 out :t_out_position,
 OUT :t_status )
 ENDEXEC.
 append itab_insp_drawing.
 endwhile.
Any ideas of how to handle blobs from non sap oracle table. I need this blob into an itab in sap.
Help appreciated.
Thanks
Mala

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

Missing rows when accessing Oracle Lite from Forte?

You may find useful these links from the Oracle technology corner >
http://www.oracle.com/technology/sample_code/tech/windows/ole_db/oledb92/index.html
http://www.oracle.com/technology/sample_code/tech/windows/ole_db/oledb8/index.html
Regards.

How to access Oracle Mobile Server logs using PL/SQL?

I am starting to use Oracle solutions so I am a complete rookie.
I'm doing a project which requires to present the logs of mobile devices using the Oracle Mobile Server (integrated in Oracle Database Lite).
Does the mobile server have services I could use or do I have to parse the log files?
Thanks in advance for any support given!
Edited by: Hugo Zenha on 15-Apr-2009 07:40

basic details for the sync history is MOBILEASDMIN.C$SYNC_HISTORY. This will give you the client id (name), start and end times, success or failure (and error if fail) plus the total data volumes uploaded and downloaded.
You can get further detail by joining c$sync_his_pub_items on session_id, and this gives the detail of each table uploaded (phase=UPLOAD) in terms of timings and records, and the same for the download. upload tends to be the full set of tables (records=0 for no activity), whilst download is only the active tables, and includes whether a complete refresh was done
You can get information for the MGP process using c$mgp_history and c$mgp_his_clients
As all the repository data is stored in the database, there is a lot of possibly interesting stuff if you look through.
We use SQL and PL/SQL to do reports on the different users having syncs within a period for cross charging and identifying clients having problems

Dynamic 'from' Clause in Native SQL

Hi All,
While running a select query in ORACLE, we can put the table name in 'from' clause at the runtime-Seletion Screen Parameter .
But I am not able to do so in SAP using Native Sql. Does SAP has any restrictions regarding this?
It might be possible that ,by using Embedded SQL (C/C++ precompiler ),we may be able to achive this.
Can any body please throw light on this.
Its Urgent.
Thanks in Advance.
Regards,
Gaurav

Hi
Assuming you can also use Open SQL.
Macroman's suggestion is OK. in Open SQL (this is SQL of ABAP platform) but a query statement can be constituted using some dynamic clauses. Although macro coding has some restrictions it will be less time consuming using it than a dynamic query.
An example SELECT statement with dynamic clauses:
SELECT (fields) FROM (table_name_variable)
INTO <target_fields>
WHERE (conditions_tab) .
For more information:
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3983358411d1829f0000e829fbfe/frameset.htm">Open SQL -Reading Data</a>
*--Serdar

# coming when I select data from oracle table using Native SQL

Hi Gurus,
I am selecting 'First name' from oracle table directly using native sql. I am fetching 65000 records but 10+ records having '#' at the end of firstname. For eg: John#.
But oracle team couldn't find '#' in their table for those records. What could be problem?
or what could be the character in oracle which comes as '#' in abap?
Pls help...
Saj

Thanks for replies.
My DB NLS_PARAMETER is AL32UTF8. I am able to pullout data with older version of ojdbc jar file. So I think there is no issue regarding NLS setting.
So please guide me with proper solution as soon as possible.

How to copy the Data From Oracle Table To SAP Table

Hi Friends,
We need to copy the data from Oracle Database Table to SAP Table. The data should be updated simultaneously in both tables . Should I write a program that contains the native sql statement like EXEC SQL PERFORMING WRITE,....
I appreciate any suggestions regarding this.
Regards
CSM Reddy

Hi,
since you posted this question in the DB2 forum I assume that you are using a DB2 database for your SAP system.
To access a table from a legacy ORACLE database you may use the DBSL multiconnect feature. I.e. you open a secondary connecction in the SAP system to your ORALE database. You can then ready the data from the ORACLE database into an ABAP internal table and insert it afterwards into the DB2 table on the main connection.
Another way to access an ORACLE table from a DB2 database is to use the DB2 federated database feature. This requires a little bit more DB2 skill. With this feature you can make the ORACLE table visible within the DB2 database. To copy data you can then simply use a "INSERT ... SELECT" statement.
Regards
Frank

Why compilation error--when trying to access the table from itcsi schema

Hi,
when querying the table from itcsi.app iam able to see the data but used in proc saying invalid table name. Whats the problem
when declared p_app_i_old app.app_i%type----It is throwing pls-00201 error
1 Create or replace procedure Test_insert(p_app_i_old integer,
2 p_app_i_new integer,
3 p_APP_ISAC_CPT_I varchar2)
4 is
5 cursor c1 is
6 select distinct table_name,owner
7 from all_tab_columns
8 where owner = 'ITCSI' and column_name='APP_I';
9 t_tablename varchar2(25);
10 t_string varchar2(300);
11 t_num number;
12 Begin
13 For c2 in c1 loop
14 t_num := 0;
15 t_string := 'SELECT count(*) FROM ' || c2.owner ||'.'||c2.table_name||' WHERE APP_I = '||p_
16 execute immediate t_string into t_num;
17 if t_num > 0 then
18 -- dbms_output.put_line('The table name is '||c1_rec.table_name);
19 if c2.Table_name = 'APP' Then
20 INSERT INTO itcsi.App
21 SELECT p_app_i_new,
22 app_acrnym_c,
23 app_x,
24 app_desc_t,
25 app_ipads_t,
26 app_prdcn_stat_t,
27 app_prdcn_stat_d,
28 app_isd_tier_c,
29 app_bus_cont_c,
30 app_extnl_cstm_c,
31 app-ecrpt_lvl_c,
32 app_isac_cpt_i,
33 dsw_gpn_i,
34 ed_cntnt_srce_t,
35 usr_upd_uunm_i,
36 ed_upd_m
37 FROM itcsi.APP
38 WHERE app_i = p_app_i_old;
39 elsif c2.Table_name = 'APP_CETRN' Then
40 Insert into itcsi.APP_CETRN
41 select p_app_i_new,
42 app_cetrn_i,
43 app-curr_cmplnc_t,
44 app_rqr_cmplnc_t,
45 dsw_gpn_i,
46 ed_cntnt_srce_t,
47 usr_upd_uunm_i,
48 ed_upd_m
49 FROM itcsi.APP_CETRN
50 WHERE app_i = p_app_i_old;
51 elsif c2.Table_name = 'APP_GPC' Then
52 Insert into itcsi.APP_GPC
53 select p_app_i_new,
54 gpc_dpnt_x,
55 gpc_elemy_x,
56 pro_i,
57 dsw_gpn_i,
58 ed_cntnt_srce_t,
59 usr_usr_upd_uunm
60 FROM itcsi.APP_GPC
61 WHERE app_i = p_app_i_old;
62 End if;
63 End if;
64 End loop;
65 --Commit;
66* End;
SQL> /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE TEST_INSERT:
LINE/COL ERROR
20/2 PL/SQL: SQL Statement ignored
37/23 PL/SQL: ORA-00942: table or view does not exist
40/2 PL/SQL: SQL Statement ignored
Thanks

how do i check the grant?
if am in my own schema,how do i connect to itcsi
schema?if you are using a schema other than the ITCSI schema, you need to login as ITCSI. or if you have dba user account you can grant a privilege of
GRANT ALL on ITCSI.APPS to <other SCHEMA>;

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

When i rendering large table from Ajax using jquery that table not Displaying and not throwing any error also. why ? in IE 8,9,10

Hi,
when i rendering large HTML table from Ajax using jquery , table not displaying in browser why ? but visible in chrome and mozilla.

Hi,
Post questions about html, css and scripting for website developers to the IE Web Development forum.
http://social.msdn.microsoft.com/Forums/ie/en-US/home?forum=iewebdevelopment
Include with your question a link to your website or a mashup that shows the issue.
If you are using the file: protocol.... MSIE browsers have security restriction for running active content from the file system.
Regards.
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com/en-us
Rob^_^

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

Error ODS activation - sql error when accessing a table.

Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either caught nor passed along using a RAISING clause, in the procedure "UPDATE_ATAB" "(FORM)"
Since the caller of the procedure could not have expected this exception
 to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.

There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource. You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman

Root cause of "SQL error in the database when accessing a table. "

Dear experts,
I meet this dump "SQL error in the database when accessing a table" when executing a sql.
Sql:
    SELECT sesssessno poscrm_serplan_id poscrm_ser_h_id poscrm_ser_i_id
           possolution_id sessbundle_id sessdbid sessinstno pos~crm_ordered_prod
           sessdbid sessinstno
      INTO CORRESPONDING FIELDS OF TABLE et_sess_list
      FROM dsvassessadmin AS sess JOIN service_posn_sm AS pos
        ON possession_id     = sesssessno
      FOR ALL ENTRIES IN lt_contractno
      WHERE sess~contractno = lt_contractno-contract_no
       AND sess~status IN lt_status_range
       AND bundle_id IN lt_bundle_id
       AND pos~solution_id GT 0
This sql works well in dev system SD7, however, it causes dump in another dev system "SMV".
Can anyone give me any ideas?
Thanks

Hi Jovito,
This is info from ST22
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "SQL0101N The statement is too long or too
     complex. SQLSTATE=54001"    Internal call code.........: "[RSQL/OPEN/DSVASSESSADMIN ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "CL_AGS_SERVICE_SERV===========CP" or "CL_AGS_SERVICE_SERV===========CM018"
    "GET_OVS_SESSION_LIST"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "GET_OVS_SESSION_LIST" "(METHOD)", or its possible occurrence must be declared
     in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
It seems that after translation the native sql is too long. But I think this can be solved.

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

TIME_OUT when accessing Oracle table from SAP using native SQL

Similar Messages

Maybe you are looking for