Timeout to Web Services using via Proxy Server

Hello,
I'm wondering if anybody can help.
I have a couple of preset web services on the coldfusion web server. As far as I know these have never worked since it's original installation back in June 2011.
Whenever I attempt to refresh one of the web services using CF administrator I am seeing the following error message:
Unable to refresh webservice.
Unable to read WSDL from URL: https://www.****.cfc?wsdl.
Error: java.net.ConnectException: Connection timed out: connect.
The server does not have a direct connection to the internet as it is connected to the internal company network which uses a proxy server for internet connectivity.
I am suspecting that CF is attempting to connect to the internet without the knowledge of the proxy server.
I have looked high and low but unable to locate anything in CF admin to add a proxy server.
I'm hoping somebody can reply with a simple solution to fix the above.
Many Thanks,
Andy

Andy, two things.
First, the problem could be proxy-related, but I notice also that the URL has https. And in that you’re getting a connection timeout, it could be that the destination server (at that URL in the web service call) is set to only allow SSL calls (or perhaps even calls to that specific site, directory, or file) from a specific IP address. Try visiting that URL from a browser running ON THAT SERVER (where CF is installed). It does not good to test the URL from your local development workstation. That would not be the same IP address from which the request would come when run via CF.
Second, as for specification of proxy info, here’s something to consider: the CF Admin interface showing web services is populated by a call from within CFML code (using CFINVOKE/cfobject/createobject) invoking that web service. If you can find the code that is really calling the web service, you should find that you can specify the proxy info there. See:
http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_i_10.html (cfinvoke)
http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_m-o_14.html (cfobject)
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=functions-pt0_23.html (createobject)
Note that with createobject, you do it using a new (for CF8) argstruct. See the docs there for more, or my blog entry:
http://www.carehart.org/blog/client/index.cfm/2007/9/5/cf8_hiddengem_createobject_argstruc t
Let us know if any of this helps.
/charlie

Similar Messages

Unallowed RFC-XML Tag (SOAP_EINVALDOC) - Web Service using ABAP Proxy

Hi there
I am trying to consume a Web Service using ABAP Proxies. I have done the following in the system:
I configured the HTTP and HTTPS Proxy settings.
I created a package with package interfaces SAI_TOOLS and SAPPINT included under the Use Access tab.
I created the proxy classes by using the WSDL provided by the system I'm trying to interface with.
I created my HTTP destination RFC via SM59.
I configured a logical port for the proxy.
I developed the ABAP code for calling the proxy.
In the code the exception CX_AI_SYSTEM_FAULT gets raised with error message <b>"Unallowed RFC-XML Tag (SOAP_EINVALDOC)"</b> when I call the method for passing data to the destination system in the proxy class.
I had a look at SM21 and the following message was written in the log:
<b>"SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)"</b>. I also looked at SAP Note 919886 which states that it can be dumps in the system, missing configuration or the path prefix of the RFC destination that is incorrect. I cannot find any ST22 entries. The trace file looks as follows:
SAP System ID: DGH
Client: 009
User: COLESKG
System time: 072910
System date: 20070531
SAP Release: 700
Host: hd307c
Operating system: AIX
DB System: ORACLE
Program: ZUK_IPA00003
Processing State: 0
Location: Client
Transport Binding: http://schemas.xmlsoap.org/soap/http
SOAP Application: urn:sap-com:soap:runtime:application:client
SOAP Runtime Protocol: http://www.sap.com/webas/630/soap
/runtime/protocol
SOAP Protocols: <initial>
Request Message: <initial>
Response Message: <initial>
Fault: <initial>
Registry: <initial>
SOAP Roles: <initial>
Trace Level: 3
Logging Level: 2
Monitoring Level: 0
Security Profile: <initial>
WS Security Protocol: <initial>
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to create client application for Proxyclass:
ZES_CO_PROCESS_EMPLOYEE_BATCH LP name: DEFAULT
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application created
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to initialize client application
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Try to initialize application
urn:sap-com:soap:runtime:application:client
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new runtime CL_SOAP_RUNTIME_CLIENT
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Try to register application
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Application registered
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Read type of transport binding from
configuration
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new transport binding type
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() Try to initialize
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() http://schemas.xmlsoap
.org/soap/http initialized
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Try to create request message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Request message created
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Try to create response message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Response message
created
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Try to initialize
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Check transport binding
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Create runtime protocol
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Runtime-intrinsic
Protocol as SENDER with Priority 5
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create trace header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Trace header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create logging header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Logging header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT()
Initialized
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Try to create instance for http://www.sap.com/webas/630/soap
/runtime/session/protocol::http://www.sap.com/webas/630/soap
/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Instance of CL_SOAP_SESSION_PROTOCOL created for http://www.sap.com/webas/630/soap/runtime/session/protocol::http://www.sap.com/webas/630/soap/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Session Protocol
as SENDER with Priority 5
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Try to configure features
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() Try to
create ICF Client for DESTINATION = ALSB
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() ICF
Client created by DESTINATION
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_DESTINATION_URL_PATH() Set
DESTINATION PATH = /SapHRSmartIntegrationWeb/processes/ProcessEmployeeBatch.jpd
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Features configured
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Application urn:sap-com:soap
:runtime:application:client initialized
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application initialized
Trace file opened at 20070531 073030 GMT SAP-REL 700,0,95
Error in module XMLParserGetNextElement:773
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfcpars.c#2 $
Unallowed RFC-XML Tag
Error in module XMLConverterReadTag:3061
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfccnvrt.c#5 $
Unallowed RFC-XML Tag(24)
Error in module ab_soap:4392
Id @(#) $Id: //bas/700_REL/src/krn/rfc/abxrfccal.c#2 $
failed with return code 1
It then must be something in the config. Has anyone got any idea why this message is encountered?
Kind Regards
Gustav Coleske
Message was edited by:
Gustav Coleske

Hi,
I have the same problem as described.
Can you give me a little more information about the error you have solved in the proxy.
Thanks for help
John

Visual Composer - access Web Services using http proxy

Hi,
I want to use an external web service in the Visual Composer. I set up the service in NWA -> SOA Management -> Destination Template Management.
I defined the http proxy in System Global Settings. The proxy requires authentication so I provided username and password.
When I want to access the web service in the Visual Composer the log file shows this:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (407) Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. ). The requested URL was:"myWSURL"
It seems that authentication is not performed although I provided the correct credentials. Using (internal) web services without the proxy works fine with the visual composer.
Any ideas? Thanks, Kevin

Hi Kevin
I have used the cglobal weather,get cities by country and Currency converter webservices in VC for CE 7.1
The pdf in the link below was of immense help..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f8a753-f03d-2a10-5fb0-f14b085b4cb2
Hope this helps.

Cosuming web service using consumer proxy - not getting the output

Hello All,
I am not getting the consumer proxy output structue filled though the web service is successfully executed. I did the following steps.
1. Created a webservice form RFC BAPISDORDER_GETDETAILEDLIST
2. Created a consumer proxy for the above created WSDL document.
3. Tested the service by executing the proxy directly by feeding the input in the XML (sales document and partner view). it is working fine
4. Created a program to access the consumer proxy by passing the input(same input as per XML). I am not getting the output in the proxy output structure ( but I can see the RFC is successfully executed and having the right values in the debugging mode).
Is this the issue is due to the date fields (XML cannot consider a blank date )?
Please note: the partner output table parameter in the bapi (output I am looking for ) is not having any date fields.
Please help me to sort out this issue.
Thanks,
Gopi

Hi Gopi,
From your description, I assume you used the SE37 transaction's menu option Utilities -> More Utilities -> Create Web Service -> From the Function Module, to expose the BAPI concerned as a Web Service.
If this is the case, then it is possible that you are falling foul of your SAP User ID not having the necessary Remote Function Call authorization to execute the BAPI.
A prerequisite for successfully calling an RFC-enabled Function Module (which is what a BAPI is) is that the User ID used to call the function module must have the required RFC authorization (Authorization Object S_RFC). For example, when calling function module BAPI_CUSTOMER_GET_ROOT, if the User ID lacks the requisite authorization in the target system, the following error message will be received by the Consuming application:
User <User ID> has no RFC authorization for function group V02HBAPI.
Notice, as you can see from the above message, RFC execution authorization is implemented at the Function Group level, not at the Function Module level. In othere words, granting a user the authorization to a function group (authorization object S_RFC) enables the user to execute all RFC-enabled function modules contained within that function group.
I am guessing the BAPI works for you in debug mode because you are not calling the BAPI remotely.
Let me know if this helps.
Best Regards,
Andy.

Down-/Upload files via Web Services using a NON-SAP system!?

Hello,
is it possible to down-/upload files via web services using a NON-SAP system!?
Regards,
Jens

Hi Jens,
I am not sure about your requirement here. What i could understand is that you want to check whether service could handle file processing?
1) Uploading file - You can build a Webservice which has import/export parameters as the file structures and implement the proxy class in such a way that the passed data is written to application server.
2) Downloading file - Same as uploading file, but the proxy class would have the code to extract data from the application server and pass them as output parameter.
Functionality of Non SAP system: The system which calls these services should be able to convert the output of proxy data into file in case of downloading the file and it should be able to convert the file data into export parameters in case of uploading file.
Hope this helps.
Regards,
Prasanna

Issue with calling an external web service using web service proxy

Hi,
I've created several web services using JDeveloper succesfully in the past, however I'm getting an issue with one that was working ok previously. Have spoken to the developers of the external web service and they say they haven't changed anything. Also if I test the external web service through soapUI for example it seems fine so it would seem that the issue is with the autogenerated code created by JDeveloper.
Basically I get the following exception as it sends the request to the external service:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Bad Authentication header format: 'Basic realm="Integration Server" encoding="UTF-8"'
Expected "," at position 33
The user name/password appear correct.
JDev version 10.1.3.42.70
Any ideas?
Many Thanks
Gary
Edited by: user10916721 on 08-May-2012 09:54

Found the answer. Basically I had one proxy web service working and one not both linking to a middle tier written in web methods. THe issue actually ended up being with the web methods code in that the one web service (that was not working) was put together using a backwards compatability mode. Once this was switched back then started working again in JDev.

How to use Axis to access a web service through Authentication proxy

Using axis access internat web service is success,but access a web service through Authentication proxy is failure.But other java classes connect through a proxy to the internet which works very well:
please help me ,thank you!!!
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
//this is my access webservice faliure   codes
public class TestClient
   public static void main(String [] args) {
       try {
            System.getProperties().setProperty("http.proxySet", "true");
            System.getProperties().setProperty("http.proxyHost","proxy.com");
            System.getProperties().setProperty("http.proxyPort", "8080");
            System.getProperties().setProperty("http.proxyUser", "username");
            System.getProperties().setProperty("http.proxyPassword","password");
           String endpoint =
                    "http://nagoya.apache.org:5049/axis/services/echo";
           Service service = new Service();
           Call     call    = (Call) service.createCall();
           call.setTargetEndpointAddress( new java.net.URL(endpoint) );
           call.setOperationName(new QName("http://soapinterop.org/", "echoString") );
           String ret = (String) call.invoke( new Object[] { "Hello!" } );
           System.out.println("Sent 'Hello!', got '" + ret + "'");
       } catch (Exception e) {
           System.err.println(e.toString());
   }I get an "(407)Proxy authorization required" error?

I am also looking for a solution. Does any one know how to do through code instead of jvm settings?
Thanks in advance!

Invoking a Web Service using XI 2.0

Hi all,
I am attempting to create a scenario where an SAP application invokes a web service through XI 2.0.
I have created an ABAP proxy to allow my ABAP to start the call process and have set up the message interfaces within the Integration Directory.
I want XI to receive a call from this proxy and then act as the client to an existing Web Service.. calling it and bringing back a response... but it doesn't look like I can import the existing WSDL as a I would have expected.
So... instead I have exported the Message Interface for the "out of XI" portion of the interface as a WSDL and have asked the Web Service provider to amend their service according to this XI generated WSDL.
My difficulty now is how to use the SOAP adapter. Within the Integration Directory I presumably need to define the endpoint with XI Connectivity but I am not sure how to fill in the URL address of the SOAP adapter...
Any help on how to configure the actual SOAP adapter to fulfill this requirement would be great too.
I have looked around the boards to see if I could work this out from previous posts but without success so far.
It's a synchronous scenario and basically should look like...
ABAP Proxy->XI->SOAP Adapter->Web Service->XI->ABAP Proxy
Many thanks,
Gordon

Hi Gordon,
here is an example for SOAP-Adapter config:
# Bubble adapter java class
classname=com.sap.aii.messaging.adapter.ModuleBubble
# Sets the bubble module helper that can instantiate your bubble bag
Bubble.Helper=com.sap.aii.messaging.adapter.ModuleBubbleHelperXMBWSImpl
###### Part 0 (FromWS and ToWS) : common part ######
# Keeps the XMB headers in web service messages
XMBWS.KeepHeaders=false
# Encodes the xmb headers into a special HTTP header string x-xmb_ws_encoded
XMBWS.UseEncoded=false
# The target URL for the web service, to which the adapter sends web service messages.
# The address is part of the WSDL
XMBWS.TargetURL=http://www.extensio.com:8080/ExtensioInfoServer/servlet/rpcrouter
# Proxy configuration from SAP
XMBWS.proxyHost=PrOxY
XMBWS.proxyPort=8080
# The port and path where the adapter waits for XMB messages from clients.
XMBWS.XMBPort=8400
XMBWS.XMBPath=/soap/stockquote
# The default SOAPAction HTTP request header to the web Service server
# The SoapAction is part of the WSDL
XMBWS.DefaultSOAPAction=
Of course you have to set URL, proxy and SOAP-action to your belongings.
You define the endpoint as:
"http://<Adapter-Server>:<XMBPort><XMBPath>"
in this example:
"http://localhost:8400/soap/stockquote"
Stefan

Error invoking SSL web service using pl sql UTL_HTTP

Web Services Gurus,
I am invoking a secure web service based on the following WSDL file from a pl/sql program using UTL_HTTP package.
The web service is secure and prompts for authentication.
The web services certificate is imported in Oracle Wallet on Database Server.
I am listing the WSDL file, the pl/sql code and error message as follows -
1. The WSDL file -
<definitions
name="Webservice"
targetNamespace="http://webservice.airclic.com/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://webservice.airclic.com/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<types>
<xs:schema targetNamespace="http://webservice.airclic.com/" version="1.0" xmlns:tns="http://webservice.airclic.com/"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Exception" type="tns:Exception"/>
<xs:element name="sendAuthenticationResponse" type="tns:sendAuthenticationResponse"/>
<xs:element name="sendAuthenticationResponseResponse" type="tns:sendAuthenticationResponseResponse"/>
<xs:complexType name="AuthenticationResponse">
<xs:complexContent>
<xs:extension base="tns:Response">
<xs:sequence>
<xs:element name="success" type="xs:boolean"/>
<xs:element name="username" type="xs:string"/>
<xs:element minOccurs="0" name="password" type="xs:string"/>
<xs:element minOccurs="0" name="firstName" type="xs:string"/>
<xs:element minOccurs="0" name="lastName" type="xs:string"/>
<xs:element minOccurs="0" name="email" type="xs:string"/>
<xs:element minOccurs="0" name="active" type="xs:boolean"/>
<xs:element minOccurs="0" name="timeZone" type="xs:string"/>
<xs:element minOccurs="0" name="group" type="xs:string"/>
<xs:element minOccurs="0" name="role" type="xs:string"/>
<xs:element minOccurs="0" name="errorCode" type="xs:string"/>
<xs:element minOccurs="0" name="errorMessage" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="DispatchEvent"></xs:complexType>
<xs:complexType name="sendAuthenticationResponse">
<xs:sequence>
<xs:element minOccurs="0" name="authenticationResponse" type="tns:AuthenticationResponse"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="sendAuthenticationResponseResponse">
<xs:sequence/>
</xs:complexType>
<xs:simpleType name="status"></xs:simpleType>
<xs:simpleType name="source"></xs:simpleType>
<xs:simpleType name="eventType"></xs:simpleType>
</xs:schema>
</types>
<message name="Webservice_sendAuthenticationResponse">
<part name="sendAuthenticationResponse" element="tns:sendAuthenticationResponse"/>
</message>
<message name="Webservice_sendAuthenticationResponseResponse">
<part name="sendAuthenticationResponseResponse" element="tns:sendAuthenticationResponseResponse"/>
</message>
<portType name="Webservice">
<operation name="sendAuthenticationResponse" parameterOrder="sendAuthenticationResponse">
<input message="tns:Webservice_sendAuthenticationResponse"/>
<output message="tns:Webservice_sendAuthenticationResponseResponse"/>
<fault name="Exception" message="tns:Exception"/>
</operation>
</portType>
<binding name="WebserviceBinding" type="tns:Webservice">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="sendAuthenticationResponse">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
<fault name="Exception">
<soap:fault name="Exception" use="literal"/>
</fault>
</operation>
</binding>
<service name="Webservice">
<port name="WebservicePort" binding="tns:WebserviceBinding">
<soap:address location="https://host.airclic.com:443/webservice/product/fieldservice/v1/Webservice"/>
</port>
</service>
</definitions>
2. The pl/sql code that calls the web service operation sendAuthenticationResponse
procedure send_auth_response
as
soap_request varchar2(30000);
soap_respond varchar2(30000);
http_req utl_http.req;
http_resp utl_http.resp;
resp XMLType;
i integer;
begin
-- initiate wallet for AirClic certificate
dbms_output.put_line ('1');
utl_http.set_wallet('file:/etc/oracle/wallet','<wallet password>');
-- create soap request
dbms_output.put_line ('2');
soap_request:= '<?xml version = "1.0" encoding = "UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<ns1:sendAuthenticationResponse xmlns="https://host.airclic.com:443/webservice/product/fieldservice/v1/Webservice" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<success xsi:type="xsd:boolean">true</success>
<username xsi:type="xsd:string">changlanih</username>
<password xsi:type="xsd:string">abcd1234</password>
<firstName xsi:type="xsd:string">hero</firstName>
<lastName xsi:type="xsd:string">changlani</lastName>
<email xsi:type="xsd:string">[email protected]</email>
<active xsi:type="xsd:boolean">true</active>
<timeZone xsi:type="xsd:string">eastern</timeZone>
<group xsi:type="xsd:string">Northeast</group>
<role xsi:type="xsd:string">Service Manager</role>
<errorCode xsi:type="xsd:string"></errorCode>
<errorMessage xsi:type="xsd:string"></errorMessage>
</ns1:sendAuthenticationResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>';
-- request that exceptions are raised for error Status Codes
dbms_output.put_line ('3');
utl_http.set_response_error_check (true);
-- allow testing for exceptions like UTL_HTTP.http_server_error
dbms_output.put_line ('4');
utl_http.set_detailed_excp_support (true);
--utl_http.set_transfer_timeout (ln_time_out);
dbms_output.put_line ('5');
utl_http.set_body_charset ('UTF-8');
-- begin request
dbms_output.put_line ('5.5');
http_req:= utl_http.begin_request
('https://host.airclic.com:443/webservice/product/fieldservice/v1/Webservice/sendAuthenticationResponse', ------ is the url correct here ?
'POST',
'HTTP/1.1'
dbms_output.put_line ('6');
utl_http.set_authentication(http_req, '<username for webservice>', '<password for webservice user>');
dbms_output.put_line ('7');
utl_http.set_persistent_conn_support (http_req, false);
dbms_output.put_line ('8');
utl_http.set_header(http_req, 'Content-Type', 'text/xml'); -- since we are dealing with plain text in XML documents
dbms_output.put_line ('9');
utl_http.set_header(http_req, 'Content-Length', length(soap_request));
dbms_output.put_line ('10');
utl_http.set_header(http_req, 'SOAPAction', ''); -- required to specify this is a SOAP communication
dbms_output.put_line ('11');
utl_http.write_text(http_req, soap_request);
dbms_output.put_line ('12');
http_resp := utl_http.get_response(http_req);
-- debug messages
DBMS_OUTPUT.PUT_LINE('-------utl_http.get_response---------------------');
DBMS_OUTPUT.PUT_LINE('http_resp.status_code is :'||http_resp.status_code );
DBMS_OUTPUT.PUT_LINE('http_resp.reason_phrase is :'||http_resp.reason_phrase);
DBMS_OUTPUT.PUT_LINE('http_resp.http_version is :'||http_resp.http_version);
DBMS_OUTPUT.PUT_LINE('http_resp.private_hndl is :'||http_resp.private_hndl);
DBMS_OUTPUT.PUT_LINE('-------utl_http.get_response----------------------');
utl_http.read_text(http_resp, soap_respond);
dbms_output.put_line ('13');
utl_http.end_response(http_resp);
dbms_output.put_line ('14');
resp := XMLType.createXML(soap_respond);
dbms_output.put_line ('15');
resp := resp.extract('/soap:Envelop/soap:Body/child::node()',
'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"');
i:=0;
dbms_output.put_line ('16');
loop
dbms_output.put_line(substr(soap_respond, 1 + i * 255, 250));
i := i + 1;
if (i * 250) > length(soap_respond) then
exit;
end if;
end loop;
exception
when utl_http.request_failed then
dbms_output.put_line('request failed: ' || utl_http.get_detailed_sqlerrm);
when utl_http.http_server_error then
dbms_output.put_line('server error: ' || utl_http.get_detailed_sqlerrm);
when utl_http.http_client_error then
dbms_output.put_line('client error: ' || utl_http.get_detailed_sqlerrm);
when others then
dbms_output.put_line(sqlerrm);
end send_auth_response;
3. Output when I run the send_auth_response procedure
Connecting to the database cpdev.
1
2
3
4
5
5.5
ORA-12560: TNS:protocol adapter error
Process exited.
Disconnecting from the database cpdev.
Comments -
The web service operation only has input message. The input message consists of a complex type as seen in WSDL.
Questions -
1. This is my first attempt in invoking a web service from pl/sql program. Is the code in SOAP body correct as mapped to the complex type in WSDL ?
2. As seen from the dbms_out - the last message before ORA-12560 is 5.5, that means the call is erroring at following code line -
http_req:= utl_http.begin_request ------ what am I doing wrong here ?
3. The web service is SSL as seen from WSDLand needs a username/password for access - which is being performed by following code line -
utl_http.set_authentication(http_req, '<username for webservice>', '<password for webservice user>'); ------- is that correct ?
4. I am not using any proxy server - should I be using it ? When is it necessary to use proxy ?
Appreciate any help.
Thanx.

Oracle is hosted by HOST A - this is where the pl/sql program resides.
The Web Service being accessed by pl/sql program is hosted by HOST B and there are 4 firewalls in between.
Oracle was not even able to establish connection to web services host.
Escalated the issue with networking folks and they resolved the connectivity problem.
Hope that helps.

Configuring the application server to use HTTP proxy server

Hi,
I am trying to configure LiveCycle ES2 to access services over the internet and since my Livecycle server connects to internet through a Proxy server, I have referred to section 5.8.2 of LiveCycle install_weblogic.pdf that states the following:
If the computer that LiveCycle ES2 is running on uses proxy settings to access external web sites, the
application server should be started with the following values set as Java virtual machine (JVM)
arguments:
-Dhttp.proxyHost= [server host]
-Dhttp.proxyPort= [server port]
However, I am getting the below exception while running the LC application as my Proxy server requires User credentials to connect to the internet:
weblogic.net.http.HttpUnauthorizedException: Proxy or Server Authentication Required.
I tried providing the below JVM startup argument too, but no luck:
-Dhttp.proxyUser= [proxy user]
-DhttpPassword= [Proxy password]
Can you please suggest how to configure User credentials for the Proxy server in Livecycle.
Thanks in advance.

Hi WASIL,
Thank you for your response.
I have followed the above document suggested by yourself and the relevant steps while setting up the Server and the Workbench, and verified the settings too.
The installation guide does highlight the steps to configure a Proxy server. However, the guide does not mention anything about how to handle Proxy server authentication.
Please note that there are Proxy authenication options available in Workbench to configure how the Workbench connects to the LiveCycle server, whereas the problem I am facing here is how to connect the LiveCycle server with internet services through a Proxy server.
I hope that clears the problem statement.
Thankyou for your assistance.

Webclipping via proxy server with autorization

I am using a proxy server that requires authorization to access web pages. How can I configure the web clipping tool to use username and password during the authorization with the proxy server? The wireless portal configuration page has an option to define this username/pwd pair but it seems not to be used by the web clipping tool according to the application logs (DEBUG WcsTxLiaison: setupProxyAuthorization host = *******, user = null, scheme = null). I tried to access the web clipping tool by logging in on the hostname/webtools/login.uix page with both the orcladmin or my private username and navigating to the "services" tab and clicking on the "web clipping" tool link.
More debug messages:
(webclipping-web: DEBUG Provider Id = default_wireless_instance_id
webclipping-web: DEBUG Portlet Id = -1
webclipping-web: DEBUG Portlet Instance Id = default_wireless_service_id
webclipping-web: DEBUG Portal User Id = default_wireless_user_name

Does total commnder recognize http proxy gatewaying for ftp?
If so, can you capture the traffic between the total commander, the proxy, and the ftp server? (Use any available snoop commands to do this.) and paste it here?

Unable to pass xmlbeans object in weblogic web services using OEPE

Migrating Weblogic web services from Weblogic Workshop 10.3 to Oracle Enterprise for Eclipse...Passing xmlbean generated types in arguments of webservice call
How to work around the following errors? I do not have this error when in workshop 10.3 only in OEPE eclipse
"oracle.eclipse.tools.webservices.compiler.CompilationException: Errors: JAX-WS web services must not have xmlBean parameter or return type"
PLease note that I want DocType to be xmlbeans generated or inherited from org.apache.xmlbeans.XmlObject....
@WebMethod
     public void upload(String filename, DocType doc) {
Hi, I have legacy codes from Weblogic workshop 10.1 and 10.3.....
I am able to compile and run in Weblogic workshop 10.3 by passing the xmlbean generated DocType as arguments in the web services call.... but why am I not able to do this in Oracle Enterprise for Eclipse OEPE......
If I were to generate the web service from teh wsdl...it will generate it's own DocType.class in the jar files and not use the xmlbean generated class one....
How to get iOEPE to generate the classes in build\jws\ for
testWSService-annotation.xml
weblogic-webservices.xml etc like in workshop
How can I resolve this??? Am I stuck with Workshop on this?? How to work around??
Any help or clarifications would be much appreciated.
Inside testWS.java,
package ws;
import java.io.File;
import javax.jws.*;
import org.example.doc.DocType;
@WebService
public class testWS {
     @WebMethod
     public void upload(String filename, DocType doc) {
          try {
               doc.save(new File(filename));
          catch(Exception e) {
               System.out.println(e);
Inside xmlbeans generated DocType.java.....and DocTypeDocuments.java
* XML Type: DocType
* Namespace: http://www.example.org/doc
* Java type: org.example.doc.DocType
* Automatically generated - do not modify.
package org.example.doc;
* An XML DocType(@http://www.example.org/doc).
* This is a complex type.
public interface DocType extends org.apache.xmlbeans.XmlObject
public static final org.apache.xmlbeans.SchemaType type = (org.apache.xmlbeans.SchemaType)
org.apache.xmlbeans.XmlBeans.typeSystemForClassLoader(DocType.class.getClassLoader(), "schemaorg_apache_xmlbeans.system.testWSTypeSystem").resolveHandle("doctypec217type");
* Gets the "element1" element
java.lang.String getElement1();
* Gets (as xml) the "element1" element
org.apache.xmlbeans.XmlString xgetElement1();
* Sets the "element1" element
void setElement1(java.lang.String element1);
* Sets (as xml) the "element1" element
void xsetElement1(org.apache.xmlbeans.XmlString element1);
* Gets the "element2" element
java.lang.String getElement2();
* Gets (as xml) the "element2" element
org.apache.xmlbeans.XmlString xgetElement2();
* Sets the "element2" element
void setElement2(java.lang.String element2);
* Sets (as xml) the "element2" element
void xsetElement2(org.apache.xmlbeans.XmlString element2);
* A factory class with static methods for creating instances
* of this type.
public static final class Factory
public static org.example.doc.DocType newInstance() {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newInstance( type, null ); }
public static org.example.doc.DocType newInstance(org.apache.xmlbeans.XmlOptions options) {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newInstance( type, options ); }
/** @param xmlAsString the string value to parse */
public static org.example.doc.DocType parse(java.lang.String xmlAsString) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xmlAsString, type, null ); }
public static org.example.doc.DocType parse(java.lang.String xmlAsString, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xmlAsString, type, options ); }
/** @param file the file from which to load an xml document */
public static org.example.doc.DocType parse(java.io.File file) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( file, type, null ); }
public static org.example.doc.DocType parse(java.io.File file, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( file, type, options ); }
public static org.example.doc.DocType parse(java.net.URL u) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( u, type, null ); }
public static org.example.doc.DocType parse(java.net.URL u, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( u, type, options ); }
public static org.example.doc.DocType parse(java.io.InputStream is) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( is, type, null ); }
public static org.example.doc.DocType parse(java.io.InputStream is, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( is, type, options ); }
public static org.example.doc.DocType parse(java.io.Reader r) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( r, type, null ); }
public static org.example.doc.DocType parse(java.io.Reader r, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( r, type, options ); }
public static org.example.doc.DocType parse(javax.xml.stream.XMLStreamReader sr) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( sr, type, null ); }
public static org.example.doc.DocType parse(javax.xml.stream.XMLStreamReader sr, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( sr, type, options ); }
public static org.example.doc.DocType parse(org.w3c.dom.Node node) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( node, type, null ); }
public static org.example.doc.DocType parse(org.w3c.dom.Node node, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( node, type, options ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.example.doc.DocType parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xis, type, null ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.example.doc.DocType parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xis, type, options ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newValidatingXMLInputStream( xis, type, null ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newValidatingXMLInputStream( xis, type, options ); }
private Factory() { } // No instance of this class allowed
Edited by: user11079482 on Jan 1, 2010 2:09 AM

Ok just as I expected. So I guess I am left with the following two options
1) either I switched to using JAXB in my apps instaed of xmlbeans....
2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
Programming Web Services for WebLogic Server (ant tasks)
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
Getting Started With WebLogic Web Services Using JAX-RPC
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How to deploy a web service on Oracle Application Server 10.1.2.0.2?

Hi everyone,
I followed the instructions of the following link to create a web service using jDeveloper 10.1.3.1.0 on Oracle Application Server 10.1.2.0.2. [http://st-curriculum.oracle.com/obe/jdev/obe1013jdev/10131/devdepandmanagingws/devdepandmanagingws.htm#t1]
The web service created was deployed & used with no errors on the standalone OC4J instance.
But my goal is to deploy my web service on Oracle Application Server 10.1.2.0.2.
So after several attempts, I was able to deploy it on the Oracle Application Server 10.1.2.0.2 but unfortunately I didn't know the URL needed to use the web service.
I tried the following link (http://192.168.0.91:18100/JavaWebService-GetDates-context-root/GetDatesWSSoapHttpPort) but also didn't work :(
I also tried converting to J2EE 1.3 and still not knowing how to access the web service.
Please advice with a solution.
Thanks in advance.
Lana

Thanks everyone for your help :)
The problem turned out to be that Oracle application server 10.1.2 is unlike the others servers, it uses 2 ports:
- port (19100) is dedicated for the console.
- port (7779) is to view your applications.
So the URL needed turned out to be "http://acteos-109.beirut.acteos:7779/beanTest" instead of "http://acteos-109.beirut.acteos:18100/beanTest"
Hope this info is useful
Lana

How to invoke a web service using https

Hi,
I have a few security related questions surrounding BPEL process manager.
1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
2. If not, what needs to be done to enable accessing a https based web service?
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
Thanks,
Pranav

1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
We currently don't have support for HTTP over SSl. We are working on it to include this functionality in near future.
2. If not, what needs to be done to enable accessing a https based web service?
I am not sure it is possible with current product offering. I will confirm it after discussing with our concerned development group. There is some work going to integrate with Oblix security mechanism [recently acquired by Oracle].
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
This will be easier to do if we can use Oblix along with BPEL PM. Could you please let us know more about your application so that we can provide you the customized solution till it's part of the product. You can send this query to [email protected] so that our product management team can give you more detailed roadmap regarding this.
HTH.
Thanks,
Rakesh

Timeout to Web Services using via Proxy Server

Similar Messages

Maybe you are looking for