Timeouts in JavaScript for PS

I did a search for this. I know JavaScript has a built in method for timeouts in the form setTimeout() and clearTimeout(). The only thing I found on this for Photoshop is for Applescript. Is there a way to start a timeout in Photoshop using JavaScript?
I have a script that runs whenever I open a CR2 file but only if I haven't processed it yet (there is a .psd file of the same name). I would like to add in a timeout with a dialog so I can suppress the actions that run from the script but if I do nothing for a specified time (5 seconds) it will default to doing the action.
This is what I have....
var im=app.activeDocument
var f=new String(im.fullName)
var len=f.length-4
var ps=File(f.substring(0,len)+".psd")
if ((im.name.indexOf(".CR2",0)) && (!ps.created)) {
//    timeOut=setTimeout("doAction('Sharpen', 'Workflow')",5000)
    if (!confirm("Suspend Sharpen?")) {
        doAction('Sharpen', 'Workflow')
    else {
//        clearTimeout(timeOut)
I modified it slightly from my original post. The above reflects the script as I have it now.
I tried setTimeout, settimeout, im.setTimeout, im.settimeout, app.setTimeout, app.settimeout but none are recognized as methods.
Any help is greatly appreciated. Thanks.
Mike

Scripts in Photoshop do not work that way. You can use $.sleep() to set a delay in your script but you will not be able to do anything in Photoshop while the script is running.
You might be able to use Bridgetalk to check the historyState after a delay and run the action then if the state is the same but I have not tried that so it may not work.

Similar Messages

  • Javascript for multiple date fields

    Hi all-
    I have to write javascript for 15 different date fields in a form.
    The requirement here is that we convert all date fields on Page 100 from date pickers (editable date fields) to display-only date fields with two controls for the users to set the date.
    If the field is empty (no date registered yet), there will be a green checkmark(X). When the user clicks this checkmark, the current date is entered into the field.
    If the field is not empty (there is a date already in the system), there will be a red X. When the user click this red X, the date from the date field is removed.
    The javascript I am using here is
    </script>
    <script type="text/javascript">
         function init(){
              var datePickerVal = $v2('P100_TODAYS_DATE');
              if(datePickerVal){
                   $x_Show('ToggleDateR');
                   $x_Hide('ToggleDateG');
              }else{
                   $x_Hide('ToggleDateR');
                   $x_Show('ToggleDateG');
         function toggleDateFunc(pValue){
              var sysDate = $v2('P100_DATE');
              if(pValue == 'R'){
                   $x_Hide('ToggleDateR');
                   $x_Show('ToggleDateG');
                   $x_Value('P100_TODAYS_DATE','');
              }else if(pValue == 'G'){
                   $x_Show('ToggleDateR');
                   $x_Hide('ToggleDateG');
                   $x_Value('P100_TODAYS_DATE',sysDate);
         window.onload = init;
    </script>
    This javascript is working for one date field( 'P100_TODAYS_DATE') but i have 15 different date fields in this page(100) all should have same funtionality. Please help me out how to write a logic to use this function for all the date fields.
    Thanks,(apex 3.2)
    Greenhorn
    Edited by: Greenhorn on Jul 19, 2011 12:30 PM

    Hi,
    You can do the needful by re-using the code if you can give the item names as P8_DATE1, P8_DATE_hh1, P8_DATE2, P8_DATEhh2 etc..So your item name just differs by a sequence.
    Now you write function which will return desired date value taking above items as input. Pass item names to this function, get session state using APEX_UTIL.GET_SESSION_STATE('item_name') API.
    Now modify you code as
    FOR i IN 1..30
    LOOP
    v_date_array[i] = f_get_date('P8_DATE'||i, 'P8_DATEhh'||i);
    END LOOP;
    ....Now you have all date valus in array. Just write one update as follows
    UPDATE  TABLE1
    SET date1 = my_date_array[1], date2 = my_date_array[2]..
    WHERE ....Hope it helps :)
    Cheers,
    Hari

  • Javascript won't work - JavaScript for Reader Mobile API Reference (Android)

    I have created a Form with the new Adobe Acrobat Pro DC (trial version).
    The Javascript code just won't work on a mobile phone.
    Doc - JavaScript for Reader Mobile API Reference (Android this shows that what I want to do is supported.
    But not even the simplest command will work on my phone. (I am using Adobe Acrobat DC - PDF reader for Android)
    Any suggestions of what I could be doing wrong?
    Best,
    Menno

    A Doc.getField() should work.. Try small steps: Create a document with two fields (e.g. Text1 and Text2), then create a custom calculation script for Text2 that uses the following code:
    event.value = this.getField("Text1").value;
    Does this copy the data you enter in Text1 to Text2?
    Then, add a third field ("Text3") and a button with the following MouseUp JavaScript action:
    this.getField("Text3").value = this.getField("Text1").value;
    Does this work? It actually works for me. To save you some work, here is a link to the test file I've used: http://khkonsulting.com/files/AUC/AndroidTest.pdf

  • 10.8.2 update: can't install "error occurred while evaluating Javascript for the package"

    Greetings All-
    I'm trying to update from 10.8.1 to 10.8.2 on my Macbook Air. When I downloaded the .dmg from Apple and ran it, I got the following error:
    "OS X Update Can't be installed on this disk. An error occurred while evaluating JavaScript for the package."
    So far, I've done the following, all to no avail:
    (1) Updated Java to v7 per Java's website, no change
    (2) Downloaded the 10.8.2 combo update, no change
    (3) Found Apple's OS X Java update (which is still at v6)- get an error at install that "the contents of the disk can't be changed"
    (4) Restarted at each step
    Does anyone have any suggestions or ideas?
    Thanks!

    Permission repair, too?
    Take a look here: https://discussions.apple.com/thread/3811748?start=0&tstart=0
    And possibly here:  https://discussions.apple.com/thread/3889562

  • PDF Form javascript for making readonly field by using button

    Please let me know the PDF Form JavaScript for making selected fields(Text field,Drop down list,..) as read-only by using Button.

    Do you want your button to be made read only?
    One starts with Acrobat JS Reference.
    // make all fields in a form read only;
    var oField; // variable for field being processed;
    // loop through the form fields;
    for (var i = 0; i < this.numFields; i++) {
    // process each field name;
    oField = this.getField(this.getNthFieldName(i)).readonly = true;

  • How do I localize text strings in the javascriptresource section i a Javascript for Photoshop?

    I have made a javascript for photoshop. I am using the <javascriptresource> and <terminology> tags to make the script to work with actions. How do I make the textstrings within the <javascriptresource> section local (translated)? The localize function and other ways to localize text that I described in the documentation do not work.

    I recommend that you post your question in the scripts forum as this forum is meant for beginners. It is not that we won't help, it is that we may not beable to provide the best help. Good luck, I hope you can figure it out.
    http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
    http://forums.adobe.com/community/photoshop/photoshop_sdk?view=discussions

  • Help with embedding Javascript for Lightbox Photo Gallery in Muse!

    Hi all:
    I am fairly new to Muse and I have been having trouble finding relevant information for embedding Javascript in order to get a lightbox to work in Muse. Would anyone be able to walk me through embedding the Javascript for the Lightbox Photogallery for Picasa in Muse?
    This is the code I want to use: Lightbox Photo Gallery and Slideshow for Picasa
    And this is the look I am trying to accomplish within my Muse site: Cycling Around The World / January 2006 / Picasa Template by www.paulvanroekel.nl
    Any help would be appreciate. Thanks much,
    Alexis

    Hi,
    I have tried inserting the script that you have pasted above as HTML on my test site and it worked.
    What happens is whenever you insert something as HTML, Muse by default creates a div tag and places the content within the div tag. What I have done differently is I have inserted the JS with in the <script> tag and it has inserted the Javascript in this manner,
    I beleive that since this a browser re-direct script that you are using, you would like to place this in the head section and not in the body tag, however, that is certainly not possible using Muse as it does not allow access to the code it generates as a muse file.
    You, can still export the pages as HTML and make the appropriate changes there before uploading to the server.
    Hope that helps.
    Regards,

  • "Adobe Photoshop Lightroom 5.4 can't be installed on this disk. An error occurred while evaluating JavaScript for the package."

    Hi there,
    I'm getting this error on trying to install / update LR 5.3 to 5.4:
    "Adobe Photoshop Lightroom 5.2 can't be installed on this disk. An error occurred while evaluating JavaScript for the package."
    I hope there's somebody that can help me out here.
    Cheers

    Hi kglad,
    Sorry for the late response:
    Here's the screenshot you wanted:
    It's in Dutch but it 's exactly the same as posted above by abphoto.biz
    I'm running OS X Maverick on an early iMac (2007). No problems until now.....
    Hope you can help,
    Cheers

  • How to use  Javascript for anchors as I cant get it to work at all?

    I am currently trying to build my own web site using iweb 08. I am a total newby so this question is for anyone who knows about javascript, particularly Cyclosaurus. I have tried in vain to use Cyclosaurus's javascript for anchors in my FAQ's page via html snippet. I must be doing something wrong, so can you help?
    1). I copied and pasted the javascript anchors code into a html snippet
    2). I changed the, anchors.push(3146) to no's 1, 2 and so on for each question
    3). I then changed 'change this to your page' to faq's
    4). I don't understand anything else from this point so please can you help to rectify my total incompetence and explain it in detail.
    This is what i have tried to do.... anchors.push(1);//faq's. followed by my question? y position
    Is this correct or have I gone totally wrong
    Please help
    Many Thanks

    I have finally published my site and yes Cyclosaurus anchors javascript worked great. It won't work when you are working on your site pages, not until you publish your site.
    Follow Cyclosaurus instructions above, it was after where I got stuck. So this is for the many people who need very clear instructions from start to finish. Otherwise you can spend countless hours scrolling through these forums. Here is what you have to do next:
    Each question must be numbered. So your first question would be numbered "1" and so on. Highlight your question at the top of your page. Open inspector and go into hyperlink
    Tick enable hyperlink box and select link to an external page. Delete everything but http:// and type in #1
    Repeat this for each question - next question would be #2 and so on
    Remember to hyper link all your "back to top" or "Top" as #0
    That's it, your good to go to go
    Thanks again to everyone

  • BackupExec: A timeout occurred waiting for NDMPD.NLM to init

    "Error: 1004 A timeout occurred waiting for NDMPD.NLM to initialize."
    A very common and well documented issue but every fix I have found has not worked. The list is extensive so I will start by describing the issue, then the environment and finally what I have tried so far.
    The issue
    I can not load BackupExec 9.1 or 9.2 on NetWare 6.5 SP8. The loader starts and when it gets to loading NDMPD.NLM the CPU hits 99% (reported by monitor.nlm) and BackupExec stops loading for about 80-120 seconds. The loader eventually gives up after a non-critical abend. From this point on I can not unload becdm.cdm and I generally reboot the server to clear the abend.
    BackupExec has been working on the server for about 2 years, I can not link any changes to the time it stopped working.
    It used to load reliably every time for about 1.5 years and then it started to exhibit this issue when loading 1 in 10 times. It has gradually gotten worse and now will not load at all.
    Before you say it, yes I know Symantec dropped BackupExec for NetWare years ago.
    It seems to me this can only be a hardware issue now but I'm keen to hear any other ideas?
    The environment
    * The physical server is a HP DL385 G5 (SKU 411360-371), the tape drive is an external half height HP Ultrium 448 LTO 2 (SKU DW086A) using SAS to connect to a HP SC44Ge SAS HBA (SKU 416096-B21). It has 18GB of RAM, Two quad-core AMD Opteron 2352 2.1 GHz CPU's and 5 x direct attached SAS hard drives running on the internal P400 RAID controller configured with RAID 5.
    * I can provide firmware versions if needed, the BIOS is HP A09 2009-07-11. Don't have the tape drive or HBA versions to hand.
    * The server is running VMware ESXi 4.1.0 build 260247, using a free license i.e. stand alone.
    * The VMware server uses about 50% of RAM, 70% of storage and 12% of CPU.
    * The guest is NetWare 6.5 SP8 (overlay) running as a guest with 4GB of vRAM and a single CPU. The tape drive is presented as a generic SCSI device.
    * I'm running BackupExec for NetWare 9.2.1401.5 build 287839 with the NetWare Open File Option and a Windows Remote Agent.
    * I'm running the storage driver LSIMPTNW.HAM version 5.02, 5 Dec 2007, which is default with SP8. BackupExec 9.2 device driver becdm.cdm version 7.50, 7 Feb 2006.
    * The NetWare server sees the tape drive as an "Unbound Device Object" until becdm.cdm is loaded at which point its recognsied as "HP Ultrium 2-SCSI T65D"
    * The tape drive is listed on the BackupExec HCL - "StorageWorks Ultrium 448 LTO2" except mine is SAS not SCSI. Enterprise Support - Symantec Corp. - Symantec Backup Exec for NetWare Servers (tm) 9.x (9.0, 9.1, 9.2) Hardware Compatibility List. Includes HCL information for supported drives, libraries, virtual tape devices, fibre-channel HBAs, switches, and rou
    What have I tried so far?
    * We have a rental tape drive identical to our own as the original one was over-heating, so I have tried two physical tape drives. Both using the same server, HBA and SAS tape drive cable.
    * I have used tcpcon.nlm to check that port 10,000 is unused.
    * I have tried the parameter -!X on the line of bestart.ncf that loads BackupExec to stop it checking if port 10,000 is free.
    * I have added a set statement to c:\nwserver\startup.ncf "set auto load of cdm modules = off" so it will not try to load unwanted CDM's.
    * I have renamed all copies of nwtape.cdm to nwtape.cdx on the C: so they can not be auto loaded.
    * There are no load statements in the startup.ncf for other tape drive device drivers. Just scsihd.cdm and idecd.cdm.
    * There are no tape libraries or robots involved. Its just a basic tape drive.
    * The physical and virtual server have been rebooted numerous times to ensure its not a memory issue etc...
    * I've loaded the server with no other significant modules loaded. Just the basics like eDirectory etc... and the same issue still occurs.
    * In addition to the NW65 SP8 default version of lsimptnw.ham I have tried version 5.03.01, 23 Jan 2008, from the LSI website.
    * I have deleted the original BackupExec folder from the server (sys:\bkupexec) and re-installed BackupExec numerous times.
    * I have powered off the tape drive a number of times
    * I have changed the tape drives virtual SCSI ID, presented by VMware to the NetWare guest, to be a higher number on the same virtual HBA as the virtual disk. I have also tried allocating the tape drive a virtual SCSI ID on a dedicated virtual HBA, SCSI 1:0.
    * I have deleted the SMDR config file (sys:\etc\sms\smdr.cfg) and re-created it using the command "load smdr.nlm new"
    * I have deleted the NetWare servers backup queue and the SMS SMDR Group from eDirectory and re-created the queue using the command "load qman.nlm new". Note: as its NW65SP8 the SMS RPC object does not exist and the SMS SMDR group is not re-created.
    * I have deleted the two BackupExec objects from eDirectory and re-created them by loading BackupExec using "bestart.ncf".
    * I have checked the health of eDirectory.
    * I have tried the LSI SAS and LSI Parallel virtual HBA's in the VMware guest machine.
    * I have tried adding the parameter qtags=off to the load command for lsimptnw.ham in startup.ncf.
    * I have tried the parameter -b on the line of bestart.ncf that loads BackupExec
    * I have tried loading ipxspx.nlm to stop any public symbol error messages when loading BackupExec
    * I have also tried BackupExec version 9.1 build 0306.12 and 9.1.1158.10 build 289707
    * I have built a second NetWare 6.5 SP8 server (SP8 overlay DVD, MD5 verified ISO media) using the Backup server profile during the GUI install stage. I have loaded afreecon.nlm, installed VMware tools (vmwtool.nlm) and BackupExec for NetWare 9.2.1401.5 build 287839. The same issue occurs
    System output
    1) Excerpt from "list storage adapters"
    0x04 [V358-A3] SAS1068:00008 [slot 8]
    0x06 [V358-A3-D0:0] HP Ultrium 2-SCSI T65D
    2) Backup Exec SureStart Console
    Module NETDB.NLM is already loaded
    Module SMDR.NLM is already loaded
    Module TSAFS.NLM is already loaded
    Loading module TSANDS.NLM
    Module BECDM.CDM is already loaded
    Loading module B2D.NLM
    Module NWIDK.NLM is already loaded
    Module NSS.NLM is already loaded
    Loading module OFM.NLM
    Loading module NRLTLI.NLM
    Loading module AD_ASPI.NLM
    Loading module NDMPD.NLM
    Error: 1004
    A timeout occurred waiting for NDMPD.NLM to initialize.
    Press <Alt+Esc> to return to the Server Console. After you resolve
    the error condition(s), re-execute the BESTART command.
    3) Abend log
    Novell Open Enterprise Server, NetWare 6.5
    PVER: 6.50.08
    Server halted Sunday, 6 May 2012 5:38:23.196
    Abend 1 on P00: Server-5.70.08: Page Fault Processor Exception (Error code 00000002)
    Registers:
    CS = 0008 DS = 0010 ES = 0010 FS = 0023 GS = 0023 SS = 0010
    EAX = 00000000 EBX = 00204B58 ECX = 896B77E0 EDX = 8A26157C
    ESI = 00204B58 EDI = 00000F9B EBP = 8A261DD4 ESP = 8A261DA8
    EIP = 8A1E03FD FLAGS = 00010082
    8A1E03FD C680B00E000000 MOV [EAX+00000EB0]=?, 00
    EIP in LSIMPTNW.HAM at code start +000013FDh
    Access Location: 0x00000EB0
    The violation occurred while processing the following instruction:
    8A1E03FD C680B00E000000 MOV [EAX+00000EB0], 00
    8A1E0404 8A45FC MOV AL, [EBP-04]
    8A1E0407 8845F8 MOV [EBP-08], AL
    8A1E040A 8A45F8 MOV AL, [EBP-08]
    8A1E040D 89EC MOV ESP, EBP
    8A1E040F 5D POP EBP
    8A1E0410 5F POP EDI
    8A1E0411 5E POP ESI
    8A1E0412 5B POP EBX
    8A1E0413 C3 RET
    Running process: Server 10 Process
    Thread Owned by NLM: SERVER.NLM
    Stack pointer: 8A261F5C
    OS Stack limit: 8A25A020
    Scheduling priority: 67371008
    Wait state: 50500F0 Waiting for work
    Stack: --8A261E01 ?
    --00000001 (LOADER.NLM|KernelAddressSpace+1)
    --00951740 ?
    8A1E0414 (LSIMPTNW.HAM|(Code Start)+1414)
    --0097BAA0 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --01900190 ?
    --157C157C ?
    --0D000001 ?
    --0097BACC ?
    --8A261D01 ?
    --8A261E18 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    8A1DFD6B (LSIMPTNW.HAM|(Code Start)+D6B)
    --0097BAA0 ?
    --0097BAC0 ?
    --00000001 (LOADER.NLM|KernelAddressSpace+1)
    --0097BA50 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00F20000 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00200000 ?
    --0097BAA0 ?
    --0097BAC0 ?
    --8A261EB0 ?
    --8A261E44 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    8A1FAA64 ?
    --0097BA50 ?
    --00000F03 (LOADER.NLM|KernelAddressSpace+F03)
    --00000286 (LOADER.NLM|KernelAddressSpace+286)
    --00951740 ?
    8972FA00 (NWPA.NLM|HAI_Enable_Real_Mode_Access+34)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --8A261E70 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    8A1FAC47 ?
    --0097BA50 ?
    --00204B58 ?
    --0097BA50 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --01080000 ?
    --01080000 ?
    --8A261E90 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    8A1FAC95 ?
    --00952180 ?
    --010824A0 ?
    --02058001 ?
    --8A261EB8 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    8A207658 ?
    --010824A0 ?
    --01091240 ?
    --00951740 ?
    --00008100 (LOADER.NLM|KernelAddressSpace+8100)
    --00008134 (LOADER.NLM|KernelAddressSpace+8134)
    --8A261EEC ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    8A208ED6 ?
    --010824A0 ?
    --00000003 (LOADER.NLM|KernelAddressSpace+3)
    --00000046 (LOADER.NLM|KernelAddressSpace+46)
    --02010002 ?
    --010824A0 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00951740 ?
    --00000001 (LOADER.NLM|KernelAddressSpace+1)
    --00204B60 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    89729AE5 (NWPA.NLM|NPAThreadRoutine+3D)
    --00010002 ?
    -896E5110 (MM.NLM|PostponeEvent+0)
    8973173F (NWPA.NLM|CDM_MountActivate_Message+EB)
    --00000001 (LOADER.NLM|KernelAddressSpace+1)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --802171E4 ?
    --802171E4 ?
    80327F6B (MM.NLM|RetryPostponedMessages+237)
    --01081A00 ?
    --00204B60 ?
    --00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
    --00204B58 ?
    --00204B58 ?
    003682B2 (SERVER.NLM|CallAESRoutineWithEsiSet+A)
    Additional Information:
    The CPU encountered a problem executing code in LSIMPTNW.HAM. The problem may be in that module or in data passed to that module by a process owned by SERVER.NLM.
    Thanks,
    MC

    Well the problem is now resolved. It was either faulty tapes (about 12 of) or two tape drives with faulty heads. We had the heads replaced in one of the drives and tested it with a new tape, it works perfectly again.
    MC

  • Client-Auth reports: HTTP4030: Timeout while waiting for client certificate

    Hello,
    I'm having problems with the certificate authentication in my Sun Java System Web Server Enterprise Edition 6.1: I have created an ACL in the SJWS that asks for a client certificate when the user goes to a specific URI:
    acl "uri=/server1/myaction.do";
    authenticate (user) {
    method="ssl";
    deny (all)
    user = "admin";
    It works great and, when the user goes to "/server1/myaction.do" (we are using Internet Explorer 7 as Web browser), the window for selecting the client certificate appears:
    - If the user selects a certificate that doesn't require password, everything works fine.
    - The problem comes when the certificate is configured in Internet Explorer for asking for a password every time it is accessed. Once the user has selected the password protected certificate, the window for typing the password appears, but if the user doesn't type it and click OK IN LESS THAN 5 SECONDS (I've timed it), the following messages appear in the SJWS logs:
    [28/Nov/2007:09:25:05] failure ( 2055): for host 10.0.145.11 trying to GET /server1/myaction.do, Client-Auth reports: HTTP4030: Timeout while waiting for client certificate.
    [28/Nov/2007:09:25:05] security ( 2055): HTTP4290: get_auth_user_ssl: client passed no certificate.
    I tried to add the following two lines to the magnus.conf file of the SJWS, but nothing changed:
    SSLClientAuthTimeout 240
    AcceptTimeout 3600
    Has anyone experienced something similar? Any little piece of advice would be greatly appreciated.
    Thank you very much in advance,
    Carlos.

    This is fixed in Web Server 7.0 update 2. Please migrate/upgrade to Web Server 7.0 update 2. Sorry for the inconvenience.

  • How to validate an text field item using javascript for numbers only.

    hi,
    how to validate an text field item using javascript for numbers only.please help me on this urgent
    please mail me solun if posible on [email protected]

    Hi,
    Page HTML header
    <script>
    function onlyNum(evt) {
      // Usage: onKeyPress="return onlyNum(event)"
      evt = (evt) ? evt : window.event;
      var charCode = (evt.which) ? evt.which : evt.keyCode;
      if (charCode > 31 && (charCode < 48 || charCode > 57)) {
        var status = 'This field accepts numbers only!';
        alert(status);
        return false;
      var status = '';
      return true;
    </script>Item HTML Form Element Attributes
    onKeyPress="return onlyNum(event)"Br,Jari

  • The JavaScript for this page failed to load correctly. Always on shutterfly.

    I'm trying to view photo albums on shutterfly and always get the following error. "The JavaScript for this page failed to load correctly. "

    Howdy there JohnB,
    It sounds like you are unable to access your Shuttefly due to a JavaScript issue in Safari. I would start by checking to see if JavaScript is enabled in the Preferences.
    Enable JavaScript
    JavaScript is a software technology that allows some buttons, online forms, and other webpage content to work properly. To block JavaScript, deselect this checkbox.
    Note: Disabling JavaScript can cause many sites not to work properly.
    From: Safari 6 (OS X Mountain Lion): Security preferences
              http://support.apple.com/kb/PH11886
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • The JavaScript for this page failed to load correctly

    I keep getting this message "The JavaScript for this page failed to load correctly" when I try to access my Shutterfly accounts.
    This is a new problem since upgrading to Mavericks.  It does not happen on my Macbook Pro running Mavericks.
    John

    Howdy there JohnB,
    It sounds like you are unable to access your Shuttefly due to a JavaScript issue in Safari. I would start by checking to see if JavaScript is enabled in the Preferences.
    Enable JavaScript
    JavaScript is a software technology that allows some buttons, online forms, and other webpage content to work properly. To block JavaScript, deselect this checkbox.
    Note: Disabling JavaScript can cause many sites not to work properly.
    From: Safari 6 (OS X Mountain Lion): Security preferences
              http://support.apple.com/kb/PH11886
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Despite my Javascript for Firefox 23 being "enabled" ( I checked re the "about:config" steps), some websites are still asking me to enable my Javascript.

    Despite my Javascript for Firefox 23 being "enabled" ( I checked re the "about:config" steps), some websites are still asking me to enable my Javascript to view content. Safari works without any problem. OS/X 10.8.4

    These files are hidden to me because my OS/X is 10.8.4 and I cannot make them appear. This is way, way more trouble than it's worth. Thanks for your help. Firefox has lost me.

Maybe you are looking for

  • Ibook - External Display problem

    Hi, I have ibook G3 running on Mac OS 10.1.3 Its screen starts flickering and hence I connected new external monitor using VGA adopter. It worked fine for a month. Now I am facing a strange problem... red colour is missing from external monitor. iboo

  • My Nokia N95 doesn't show the codes like *#0000# a...

    My Nokia N95 doesn't show the codes like *#0000# and *#06# anymore. Actually all the codes , even those for restoring to the factory settings  don't work anymore. Now when i type them in  , the phone only bips once and that's all. They worked before

  • FLV Master Detail Gallery

    I'd like to use a master/detail region scenario with FLV's. Right now I've been using iframes and its sketchy at best. I want the user to click thumbnails which load an FLV video and text from an XML file. Here's what I've come up with this far: http

  • Awswax.ocx add-on error during course quit

    We have started getting an error almost every time we quit our courses. We are getting it on both our main server and our test server. Many of the courses, especially on the main server, have not been changed for some time. We are running those same

  • Essbase 9.3.1, more time taken for data load.

    Hi, i am trying to load 15gb of data, (data is taken from two seperate database of oracle) to my ASO application directly. the load is very slow, what factors should i consider to make the load faster? Will incresing the RAM size help me in this cont