BackupExec: A timeout occurred waiting for NDMPD.NLM to init
"Error: 1004 A timeout occurred waiting for NDMPD.NLM to initialize."
A very common and well documented issue but every fix I have found has not worked. The list is extensive so I will start by describing the issue, then the environment and finally what I have tried so far.
The issue
I can not load BackupExec 9.1 or 9.2 on NetWare 6.5 SP8. The loader starts and when it gets to loading NDMPD.NLM the CPU hits 99% (reported by monitor.nlm) and BackupExec stops loading for about 80-120 seconds. The loader eventually gives up after a non-critical abend. From this point on I can not unload becdm.cdm and I generally reboot the server to clear the abend.
BackupExec has been working on the server for about 2 years, I can not link any changes to the time it stopped working.
It used to load reliably every time for about 1.5 years and then it started to exhibit this issue when loading 1 in 10 times. It has gradually gotten worse and now will not load at all.
Before you say it, yes I know Symantec dropped BackupExec for NetWare years ago.
It seems to me this can only be a hardware issue now but I'm keen to hear any other ideas?
The environment
* The physical server is a HP DL385 G5 (SKU 411360-371), the tape drive is an external half height HP Ultrium 448 LTO 2 (SKU DW086A) using SAS to connect to a HP SC44Ge SAS HBA (SKU 416096-B21). It has 18GB of RAM, Two quad-core AMD Opteron 2352 2.1 GHz CPU's and 5 x direct attached SAS hard drives running on the internal P400 RAID controller configured with RAID 5.
* I can provide firmware versions if needed, the BIOS is HP A09 2009-07-11. Don't have the tape drive or HBA versions to hand.
* The server is running VMware ESXi 4.1.0 build 260247, using a free license i.e. stand alone.
* The VMware server uses about 50% of RAM, 70% of storage and 12% of CPU.
* The guest is NetWare 6.5 SP8 (overlay) running as a guest with 4GB of vRAM and a single CPU. The tape drive is presented as a generic SCSI device.
* I'm running BackupExec for NetWare 9.2.1401.5 build 287839 with the NetWare Open File Option and a Windows Remote Agent.
* I'm running the storage driver LSIMPTNW.HAM version 5.02, 5 Dec 2007, which is default with SP8. BackupExec 9.2 device driver becdm.cdm version 7.50, 7 Feb 2006.
* The NetWare server sees the tape drive as an "Unbound Device Object" until becdm.cdm is loaded at which point its recognsied as "HP Ultrium 2-SCSI T65D"
* The tape drive is listed on the BackupExec HCL - "StorageWorks Ultrium 448 LTO2" except mine is SAS not SCSI. Enterprise Support - Symantec Corp. - Symantec Backup Exec for NetWare Servers (tm) 9.x (9.0, 9.1, 9.2) Hardware Compatibility List. Includes HCL information for supported drives, libraries, virtual tape devices, fibre-channel HBAs, switches, and rou
What have I tried so far?
* We have a rental tape drive identical to our own as the original one was over-heating, so I have tried two physical tape drives. Both using the same server, HBA and SAS tape drive cable.
* I have used tcpcon.nlm to check that port 10,000 is unused.
* I have tried the parameter -!X on the line of bestart.ncf that loads BackupExec to stop it checking if port 10,000 is free.
* I have added a set statement to c:\nwserver\startup.ncf "set auto load of cdm modules = off" so it will not try to load unwanted CDM's.
* I have renamed all copies of nwtape.cdm to nwtape.cdx on the C: so they can not be auto loaded.
* There are no load statements in the startup.ncf for other tape drive device drivers. Just scsihd.cdm and idecd.cdm.
* There are no tape libraries or robots involved. Its just a basic tape drive.
* The physical and virtual server have been rebooted numerous times to ensure its not a memory issue etc...
* I've loaded the server with no other significant modules loaded. Just the basics like eDirectory etc... and the same issue still occurs.
* In addition to the NW65 SP8 default version of lsimptnw.ham I have tried version 5.03.01, 23 Jan 2008, from the LSI website.
* I have deleted the original BackupExec folder from the server (sys:\bkupexec) and re-installed BackupExec numerous times.
* I have powered off the tape drive a number of times
* I have changed the tape drives virtual SCSI ID, presented by VMware to the NetWare guest, to be a higher number on the same virtual HBA as the virtual disk. I have also tried allocating the tape drive a virtual SCSI ID on a dedicated virtual HBA, SCSI 1:0.
* I have deleted the SMDR config file (sys:\etc\sms\smdr.cfg) and re-created it using the command "load smdr.nlm new"
* I have deleted the NetWare servers backup queue and the SMS SMDR Group from eDirectory and re-created the queue using the command "load qman.nlm new". Note: as its NW65SP8 the SMS RPC object does not exist and the SMS SMDR group is not re-created.
* I have deleted the two BackupExec objects from eDirectory and re-created them by loading BackupExec using "bestart.ncf".
* I have checked the health of eDirectory.
* I have tried the LSI SAS and LSI Parallel virtual HBA's in the VMware guest machine.
* I have tried adding the parameter qtags=off to the load command for lsimptnw.ham in startup.ncf.
* I have tried the parameter -b on the line of bestart.ncf that loads BackupExec
* I have tried loading ipxspx.nlm to stop any public symbol error messages when loading BackupExec
* I have also tried BackupExec version 9.1 build 0306.12 and 9.1.1158.10 build 289707
* I have built a second NetWare 6.5 SP8 server (SP8 overlay DVD, MD5 verified ISO media) using the Backup server profile during the GUI install stage. I have loaded afreecon.nlm, installed VMware tools (vmwtool.nlm) and BackupExec for NetWare 9.2.1401.5 build 287839. The same issue occurs
System output
1) Excerpt from "list storage adapters"
0x04 [V358-A3] SAS1068:00008 [slot 8]
0x06 [V358-A3-D0:0] HP Ultrium 2-SCSI T65D
2) Backup Exec SureStart Console
Module NETDB.NLM is already loaded
Module SMDR.NLM is already loaded
Module TSAFS.NLM is already loaded
Loading module TSANDS.NLM
Module BECDM.CDM is already loaded
Loading module B2D.NLM
Module NWIDK.NLM is already loaded
Module NSS.NLM is already loaded
Loading module OFM.NLM
Loading module NRLTLI.NLM
Loading module AD_ASPI.NLM
Loading module NDMPD.NLM
Error: 1004
A timeout occurred waiting for NDMPD.NLM to initialize.
Press <Alt+Esc> to return to the Server Console. After you resolve
the error condition(s), re-execute the BESTART command.
3) Abend log
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.08
Server halted Sunday, 6 May 2012 5:38:23.196
Abend 1 on P00: Server-5.70.08: Page Fault Processor Exception (Error code 00000002)
Registers:
CS = 0008 DS = 0010 ES = 0010 FS = 0023 GS = 0023 SS = 0010
EAX = 00000000 EBX = 00204B58 ECX = 896B77E0 EDX = 8A26157C
ESI = 00204B58 EDI = 00000F9B EBP = 8A261DD4 ESP = 8A261DA8
EIP = 8A1E03FD FLAGS = 00010082
8A1E03FD C680B00E000000 MOV [EAX+00000EB0]=?, 00
EIP in LSIMPTNW.HAM at code start +000013FDh
Access Location: 0x00000EB0
The violation occurred while processing the following instruction:
8A1E03FD C680B00E000000 MOV [EAX+00000EB0], 00
8A1E0404 8A45FC MOV AL, [EBP-04]
8A1E0407 8845F8 MOV [EBP-08], AL
8A1E040A 8A45F8 MOV AL, [EBP-08]
8A1E040D 89EC MOV ESP, EBP
8A1E040F 5D POP EBP
8A1E0410 5F POP EDI
8A1E0411 5E POP ESI
8A1E0412 5B POP EBX
8A1E0413 C3 RET
Running process: Server 10 Process
Thread Owned by NLM: SERVER.NLM
Stack pointer: 8A261F5C
OS Stack limit: 8A25A020
Scheduling priority: 67371008
Wait state: 50500F0 Waiting for work
Stack: --8A261E01 ?
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00951740 ?
8A1E0414 (LSIMPTNW.HAM|(Code Start)+1414)
--0097BAA0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--01900190 ?
--157C157C ?
--0D000001 ?
--0097BACC ?
--8A261D01 ?
--8A261E18 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
8A1DFD6B (LSIMPTNW.HAM|(Code Start)+D6B)
--0097BAA0 ?
--0097BAC0 ?
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--0097BA50 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00F20000 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00200000 ?
--0097BAA0 ?
--0097BAC0 ?
--8A261EB0 ?
--8A261E44 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
8A1FAA64 ?
--0097BA50 ?
--00000F03 (LOADER.NLM|KernelAddressSpace+F03)
--00000286 (LOADER.NLM|KernelAddressSpace+286)
--00951740 ?
8972FA00 (NWPA.NLM|HAI_Enable_Real_Mode_Access+34)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--8A261E70 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
8A1FAC47 ?
--0097BA50 ?
--00204B58 ?
--0097BA50 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--01080000 ?
--01080000 ?
--8A261E90 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
8A1FAC95 ?
--00952180 ?
--010824A0 ?
--02058001 ?
--8A261EB8 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
8A207658 ?
--010824A0 ?
--01091240 ?
--00951740 ?
--00008100 (LOADER.NLM|KernelAddressSpace+8100)
--00008134 (LOADER.NLM|KernelAddressSpace+8134)
--8A261EEC ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
8A208ED6 ?
--010824A0 ?
--00000003 (LOADER.NLM|KernelAddressSpace+3)
--00000046 (LOADER.NLM|KernelAddressSpace+46)
--02010002 ?
--010824A0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00951740 ?
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00204B60 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
89729AE5 (NWPA.NLM|NPAThreadRoutine+3D)
--00010002 ?
-896E5110 (MM.NLM|PostponeEvent+0)
8973173F (NWPA.NLM|CDM_MountActivate_Message+EB)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--802171E4 ?
--802171E4 ?
80327F6B (MM.NLM|RetryPostponedMessages+237)
--01081A00 ?
--00204B60 ?
--00000F9B (LOADER.NLM|KernelAddressSpace+F9B)
--00204B58 ?
--00204B58 ?
003682B2 (SERVER.NLM|CallAESRoutineWithEsiSet+A)
Additional Information:
The CPU encountered a problem executing code in LSIMPTNW.HAM. The problem may be in that module or in data passed to that module by a process owned by SERVER.NLM.
Thanks,
MC
Well the problem is now resolved. It was either faulty tapes (about 12 of) or two tape drives with faulty heads. We had the heads replaced in one of the drives and tested it with a new tape, it works perfectly again.
MC
Similar Messages
-
CCP related: A timeout occured waiting for a response from the ECU
Hello All,
I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
-Lucky.Hello,
I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
I am sending you a link which gives you some insight about the installation of CCP command set and the use of the toolkit with the USB CAN hardware.
http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
Attachments:
can manual.pdf 1437 KB -
Timeout(60 seconds) occurred waiting for page to load
Hello,
Can somebody provide solution for mentioned problem-
After Browser launch when I try to navigate the URL, openscript is throwing error (Timeout(60 seconds) occurred waiting for page to load.).
Error code - WAIT_FOR_PAGE_TIMEOUT_ERROR.
I am performing following steps.
1. Launch Browser
2. Navigate to Oracle EBS url
3. Close Browser
4. Launch Browser
5. Navigate again to Oracle EBS url
The last steps is not working correctly, openscript throw timeout error and also IE msg "Internet Explorer has stopped working".
IE version - 8
Thanks.Any comments plz
-
Client-Auth reports: HTTP4030: Timeout while waiting for client certificate
Hello,
I'm having problems with the certificate authentication in my Sun Java System Web Server Enterprise Edition 6.1: I have created an ACL in the SJWS that asks for a client certificate when the user goes to a specific URI:
acl "uri=/server1/myaction.do";
authenticate (user) {
method="ssl";
deny (all)
user = "admin";
It works great and, when the user goes to "/server1/myaction.do" (we are using Internet Explorer 7 as Web browser), the window for selecting the client certificate appears:
- If the user selects a certificate that doesn't require password, everything works fine.
- The problem comes when the certificate is configured in Internet Explorer for asking for a password every time it is accessed. Once the user has selected the password protected certificate, the window for typing the password appears, but if the user doesn't type it and click OK IN LESS THAN 5 SECONDS (I've timed it), the following messages appear in the SJWS logs:
[28/Nov/2007:09:25:05] failure ( 2055): for host 10.0.145.11 trying to GET /server1/myaction.do, Client-Auth reports: HTTP4030: Timeout while waiting for client certificate.
[28/Nov/2007:09:25:05] security ( 2055): HTTP4290: get_auth_user_ssl: client passed no certificate.
I tried to add the following two lines to the magnus.conf file of the SJWS, but nothing changed:
SSLClientAuthTimeout 240
AcceptTimeout 3600
Has anyone experienced something similar? Any little piece of advice would be greatly appreciated.
Thank you very much in advance,
Carlos.This is fixed in Web Server 7.0 update 2. Please migrate/upgrade to Web Server 7.0 update 2. Sorry for the inconvenience.
-
Timeout in waiting for IPS service to start. Component: IPS
Hello
I have an sa 520 and in logs i see the message
<Timeout in waiting for IPS service to start.
Component: IPS>
i am sure that ips failed to start because although i have enabled ips in lan with
Signature File SBIPS000019 i do not see any logs for ips events
firmware version = 2.2.0.7
the above happened after a facory reset and configuration from scratchWell the problem is now resolved. It was either faulty tapes (about 12 of) or two tape drives with faulty heads. We had the heads replaced in one of the drives and tested it with a new tape, it works perfectly again.
MC -
Machine freeze, timeout waiting for nf to load
my imac27 was randomly freezing requiring reboot, other times kernel panicking.
apple changed the logicboard after doing some diagnostics.
for a while it was fine -- then began freezing again.
console logs seem to show the following repeated kernel error
Timeout while waiting for nf to load: > AR_PHY_AGC_CONTROL=0x40d22
this is logged multiple times (2 dozen) before the system eventually freezes.
searching on this error -- seems to point to a network problem. either base station/WAP or wireless NIC in the imac, but i can't be sure and the details are still murky.
can anyone shed light here?I have exactly the same problem.
Apple changed the bluetooth module, but the problem is still hier.
Someone has got a solution? -
Hi Everyone,
We have the password portal up and running on one box and another server with FIM R2 and SharePoint 2010. All is good with the exception that our end users typically get distracted during the password registration and/or reset process and receive:
"An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000) ". The timeout kicks in after 5 minutes of inactivity in the browser.
The FIM Service log shows the following:
"Authentication gate timed out waiting for a challenge response".
I have confirmed that the default password portal web.config setting is <add key="SessionTimeoutInMinutes" value="20" />.
We have also updated Microsoft.ResourceManagement.Service.exe.config per this
article to the following but with no luck:
<resourceManagementClient resourceManagementServiceBaseAddress="myAddress" timeoutInMilliseconds="600000" />
<resourceManagementService externalHostName="myHost" dataReadTimeoutInSeconds="600" dataWriteTimeoutInSeconds="600"/>
We did not update the Windows SharePoint Servicesweb.config setting per the article about since we are on SharePoint 2010.
There is no NLB or firewall in front on this server.
If anyone has any solution to how to solve this on FIM R2/SharePoint 2010 please let me know.
Cheers!FIM_Admin,
You could try changing the receiveTimeoutInSeconds parameter of the resourceManagementService node in your Microsoft.ResourceManagement.Service.exe.config file. However, you are warned not to do this unless instructed to by MS customer support.
http://msdn.microsoft.com/en-us/library/windows/desktop/ee652424(v=vs.100).aspx
http://technet.microsoft.com/en-us/library/ff800821(v=ws.10).aspx -
Patch 9239090 - ORA-04021: timeout occurred while waiting to lock object
Hello Guys,
I need help urgently to comlete an upgrade of ebs 12.1.1 to 12.1.3.
We are upgrading ebs 11i to 12i going live this weekend. We have encountered "ORA-04021: timeout occurred while waiting to lock object" on patch 9239090 with two Workers:
In adctrl:
1 Run AutoPatch R120 AFUTLGRS.pls FAILED
2 Run AutoPatch R120 AFUTLOGS.pls FAILED
sqlplus -s APPS/***** @/u02/applfinp/apps/apps_st/appl/admin/OFPROD/out/p001invok.sql
Connected.
create or replace package wf_bes_cleanup AUTHID CURRENT_USER as
ERROR at line 1:
ORA-04021: timeout occurred while waiting to lock object
I have done everything everything imaginable but cannot get pass these 2 failed workers.
1) I have checked are there are no locks blocking on any objects:
select s1.username || '@' || s1.machine
|| ' ( SID=' || s1.sid || ' ) is blocking '
|| s2.username || '@' || s2.machine || ' ( SID=' || s2.sid || ' ) ' AS blocking_status
from v$lock l1, v$session s1, v$lock l2, v$session s2
where s1.sid=l1.sid and s2.sid=l2.sid
and l1.BLOCK=1 and l2.request > 0
and l1.id1 = l2.id1
and l2.id2 = l2.id2 ;
2) I also checked and there is space in the database.
3) From adctrl, I have tried restarting the jobs one by one but the worker 1 hangs at and eventually fails on several (12) attempts.
4) The solution on Doc ID 1291064.1 is not the problem:
SQL> select SUPPLEMENTAL_LOG_DATA_MIN, SUPPLEMENTAL_LOG_DATA_PK, SUPPLEMENTAL_LOG_DATA_UI, FORCE_LOGGING
from v$database;
SUPPLEME SUP SUP FOR
NO NO NO NO
5) Manual execution still gave ORA-04021:
sqlplus -s APPS/apps @/u02/applfinp/apps/apps_st/appl/admin/OFPROD/out/p001invok.sql
sqlplus -s APPS/apps @/u02/applfinp/apps/apps_st/appl/admin/OFPROD/out/p002invok.sql
6) The alert log has no related errors
7) I Finally, after over 6 hours of waiting, I could only get the patch to continue after by using adctrl option 8 to skip these two workers.
After proceeding, I have yet hit two more errors and now stuck:
I have hit another error with the same patch:
create or replace package body FND_LOG as
/* $Header: AFUTLOGB.pls 120 ...
AD Worker error:
ORA-04021: timeout occurred while waiting to lock object
Unable to process file in PACKAGE mode.
Not converting file for Invoker's Rights because it appears to be a package body creation script (based on the filename).
File is: /u02/applfinp/apps/apps_st/appl/fnd/12.0.0/patch/115/sql/AFUTLOGB.pls
AD Worker warning:
Product Data File
/u02/applfinp/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the above file does not exist in APPL_TOP. The product will be ignored without error
AD Worker error:
The following ORACLE error:
ORA-04063: package body "APPS.FND_LOG" has errors
ORA-06508: PL/SQL: could not find program unit being called: "APPS.FND_LOG"
ORA-06512: at "APPS.FND_FUNCTION", line 834
ORA-06512: at "APPS.FND_MENU_ENTRIES_C_DELTRG", line 4
ORA-04088: error during execution of trigger 'APPS.FND_MENU_ENTRIES_C_DELTRG'
Can I stop and restart this patch 9239090?Hello,
I later executed the failed jobs or scripts manually (successfully) for the patch to continue
sqlplus -s APPS/apps @/u02/applfinp/apps/apps_st/appl/admin/OFPROD/out/p001invok.sql
sqlplus -s APPS/apps @/u02/applfinp/apps/apps_st/appl/admin/OFPROD/out/p002invok.sql
The patch ended with the following :
The following Oracle Reports objects did not generate successfully:
ap reports/US APXARATE.rdf
ar reports/US ARXCTA.rdf
fa reports/US FASRSVED.rdf
ont reports/US OEXOEORD.rdf
pa reports/US PAXACMPT.rdf
pa reports/US PAXALRUN.rdf
pa reports/US PAXACRPT.rdf
pa reports/US PAXCPGAL.rdf
pa reports/US PAXPCRFD.rdf
The patch execution ended but the patch number is not record in apps.ad_bugs table:
select TO_CHAR(CREATION_DATE,'dd-Mon-yyyy, hh24:mm:ss'), BUG_NUMBER from apps.ad_bugs where bug_number in ('9239090');
no rows selected
JFI
Patches located in ad_applied_patches to which there is no a corresponding record in ad_bugs:
SQL> SELECT a.patch_name, TO_CHAR(max(a.last_update_date),'dd-Mon-yyyy, hh24:mm:ss')
2 FROM applsys.ad_applied_patches a
3 WHERE NOT EXISTS (SELECT '1'
4 FROM ad_bugs b
5 WHERE b.bug_number = a.patch_name)
6 group by a.patch_name;
PATCH_NAME TO_CHAR(MAX(A.LAST_UP
9239090 26-Oct-2013, 00:10:27
AutoConfig 25-Oct-2013, 17:10:51
merger9179588 25-Oct-2013, 11:10:30
merger_post_5903765 27-Apr-2013, 23:04:45
mergeu6678700 25-Oct-2013, 16:10:09
What could have happened that this was not recorded in ad_bugs?
How to I get this recorded in the ad_bugs table?
Thanks
Mathias -
ORA-02049: timeout: distributed transaction waiting for lock
Hi,
My name is Guneet and I'm working on an application running on BEA Weblogic Server 9.2 running on a Red Hat Linux box using Oracle 10g as the database. My problem is that recently our code started getting the following exception while updating a database table.
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock
Application Details
* Using Stateless Session EJB
* Only one Business method in this EJB with transaction attribute set to "required"
* This method executes two select queries & one update query
* We are using JDBC to access the database.
* We have configured a Data Source & are using it to get a database connection.
* Weblogic's Oracle Driver is being used.
More details
* The application has been running well since a month.
* Two days ago,the update query failed with the above error.
* At that time, a single client was accessing the system.
* Once this problem occurs, it starts appearing frequently.
* Eventually a request to get a connection from the Data Source times out & the exception copied at the end is thrown
* At this stage the application gets stuck and all requests trying to get a connection end up with this exception.
* Fortunately, Restarting the Weblogic Server gets us out of this problem and transactions resume normally.
Now my questions are
# Why is this error happening & what does it mean?
# It looks like the second exception (unable to get a connection from ds) is an after effect of the first problem (ORA-02049) once it appears for a couple of times. Can somebody validate this?
# Though I don't understand JTA well but I don't think this application needs distributed transactions so, I'm thinking of modifying the driver type to non-XA oracle driver. Any advise/pointers/comments on this front is welcome !!!!!!!!
Thanks
Guneet Sahai
Exception Trace
Dec 27, 2006 4:47:50 PM | com.gisil.themis.db | SEVERE | Unable to load merchant DEL = 911168900164. Reason - java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'themis-ds': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException: Unexpected error during start for XAResource 'themis-ds': Transaction timed out after 29 seconds
BEA1-252DE51AC930078CA638
at weblogic.jdbc.wrapper.XA.createException(XA.java:103)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:753)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1408)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1413)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)guneet sahai wrote:
Hi,
My name is Guneet and I'm working on an application running on BEA Weblogic Server 9.2 running on a Red Hat Linux box using Oracle 10g as the database. My problem is that recently our code started getting the following exception while updating a database table.
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock
Application Details
* Using Stateless Session EJB
* Only one Business method in this EJB with transaction attribute set to "required"
* This method executes two select queries & one update query
* We are using JDBC to access the database.
* We have configured a Data Source & are using it to get a database connection.
* Weblogic's Oracle Driver is being used.
More details
* The application has been running well since a month.
* Two days ago,the update query failed with the above error.
* At that time, a single client was accessing the system.
* Once this problem occurs, it starts appearing frequently.
* Eventually a request to get a connection from the Data Source times out & the exception copied at the end is thrown
* At this stage the application gets stuck and all requests trying to get a connection end up with this exception.
* Fortunately, Restarting the Weblogic Server gets us out of this problem and transactions resume normally.
Now my questions are
# Why is this error happening & what does it mean?
# It looks like the second exception (unable to get a connection from ds) is an after effect of the first problem (ORA-02049) once it appears for a couple of times. Can somebody validate this?
# Though I don't understand JTA well but I don't think this application needs distributed transactions so, I'm thinking of modifying the driver type to non-XA oracle driver. Any advise/pointers/comments on this front is welcome !!!!!!!!
Thanks
Guneet SahaiHi Guneet. If you want to debug the JTA issue, I suggest opening an official
support case. They will lead you through producing the JTA debug information.
However, I believe you are correct that the transaction you describe is
completely doable with a simple local transaction, so if you were to alter
your pool to use the non-XA driver, it would probably be faster, simpler,
and just work.
Let me know...
Joe
>
Exception Trace
Dec 27, 2006 4:47:50 PM | com.gisil.themis.db | SEVERE | Unable to load merchant DEL = 911168900164. Reason - java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'themis-ds': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException: Unexpected error during start for XAResource 'themis-ds': Transaction timed out after 29 seconds
BEA1-252DE51AC930078CA638
at weblogic.jdbc.wrapper.XA.createException(XA.java:103)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:753)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1408)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1413)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181) -
Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start
I am trying to run .portal file using "Run on server" option in Workshop for weblogic.
After doing this, its trying to start the server Oracle weblogic server v10.3 at localhost and then publish my module.
Server view status shows as "State" as "Starting" and "Status" as "Synchronizing". When status reaches 82% it gets stopped there for a long time, and when 83% comes up, I can see the "State" as "Stopped" and "Status" as "Republish". And then an error window with title as "Problem Occured" and contents saying, Starting server- Oracle weblogic server v10.3 at localhost (Time of error: ...) Details >> Timeout waiting for Oracle WebLogic Server v10.3 at localhost to start. Server did not start after 480s.
But the console tab (when I give the startup & Deployment option as "Launch Weblogic server in eclipse console) shows,
<Sep 8, 2011 6:15:03 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
e changed to STARTING> (final step alone I pasted)
Before this I can see, WLS Start mode = Development, setting Classpath ,
<Sep 8, 2011 5:56:36 PM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\user_projects\domains\myPortalDomain\servers\AdminServer\logs\Ad
minServer.log is opened. All server side log events will be written to this file
.>
When I checked Adminserver file its having,
<AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315487671986> <BEA-160151> <Registered library Extension-Name: wlp-groupspace-app-lib, Specification-Version: 10.3, Implementation-Version: 10.3.0.1 (EAR).>
And many more similar entries...
Also there is Adminserver.logxxx file which is having,
####<Sep 8, 2011 5:33:58 PM IST> <Warning> <JDBC> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438048> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>
####<Sep 8, 2011 5:33:58 PM IST> <Info> <JDBC> <CINTNCHEOLY0GX7> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1315483438267> <BEA-001156> <Stack trace associated with message 001129 follows:
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.
at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
at com.pointbase.net.netJDBCConnection.a(Unknown Source)
at com.pointbase.net.netJDBCConnection.<init>(Unknown Source)
at com.pointbase.net.netJDBCDriver.getConnection(DashoA10*..:170)
at com.pointbase.net.netJDBCDriver.connect(DashoA10*..:94)
at com.pointbase.jdbc.jdbcUniversalDriver.getConnection(Unknown Source)
at com.pointbase.jdbc.jdbcUniversalDriver.connect(Unknown Source)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:316)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:217)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2282)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
And many more entries like the above...
I even tried startup & Deployment option as "Start weblogic server in Expressmode" and still same error I am getting and this time instead of in eclipse console, I can see command prompt and here also showing "Server state changed to STARTING"
FYI, I created domain with runtime JRocket 1.6.0_05.
I even tried to clean build the portal project and publish using clean option. Still same problem coming :(
FYI, my system is having 1 GB RAM only and bit slow. Could this be a problem or something else? Please suggest.
Thanks in advance.
Edited by: gopikrish on Sep 8, 2011 6:20 AMHi Gopikrish
The root cause for your error is, it is not able to start the Pointbase database. Looks like you configured a domain with default pointbase database. In the domain\bin\ one of the starup scripts like startWeblogic.cmd, you should see some lines that start the pointbase database.
java.sql.SQLException: SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093
Instead of starting from Workshop, go to the domain root folder and start the weblogic using the command like startWeblogic.cmd (or .sh on unix). This should start the pointbase and then start the portal domain. Portal domain does need this backend pointbase database to store all the portal meta data and has datasources configured for this.
Do you have a Clustered Portal domain, with one of the managed servers located in the remote machine. If yes, and if you use default Pointbase database, you need to change something like pointbase db should not be localhost but the name of the machine where you have the admin server running.
Either way, the issue is not able to stat the pointbase db and thus serve not starting.
Thanks
Ravi Jegga -
Error 15 Occurred at Wait for GPIB RQS
I have a VI that works well, but occasionally gives my the following error at random:
Error 15 Occurred at Wait for GPIB RQS in Instron Test Logger.vi
Labview: Resource not Found
If I press continue my VI will usually run fine but occasionally it will give me the same error a second time. Also the error only occurs when I first fire up my VI. Once I dismiss the error the VI will run properly for days.Jeff Bohrer wrote:
Crusher wrote:
Today I was using my VI and I got a different error on a different GPIB block. On the first GPIB Read block in the system I am getting an Error 6.
Also I was Finally able to find the error code table and here are the error descriptions:
6 EABO I/O operation aborted. This error occurs when the I/O operation is aborted due to timeout, ibstop, or Device Clear.
15 ESTB Serial poll byte queue overflow.
I attached my vi.
Message Edited by Crusher on 09-29-2009 10:40 AM
I'm not totally familliar with the instrument you are using but I see no place in your code where you tell it to assert RQS and under what conditions you do so. This makes some sense as if, the unit is not responding to the serial polls ??? it would eventually timeout and overflow the serial poll buffer. Can you post a link to the 8511 programming guide?
And is it possible to use VISA instead of straight GPIB?
Bill
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha
Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
/// <summary>
/// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
/// determine whether or not the entity class should be generated.
/// </summary>
public class CodeWriterFilter : ICodeWriterFilterService
//list of entity names to generate classes for.
private HashSet<string> _validEntities = new HashSet<string>();
//reference to the default service.
private ICodeWriterFilterService _defaultService = null;
/// <summary>
/// constructor
/// </summary>
/// <param name="defaultService">default
implementation</param>
public CodeWriterFilter( ICodeWriterFilterService defaultService )
this._defaultService = defaultService;
LoadFilterData();
/// <summary>
/// loads the entity filter data from the filter.xml file
/// </summary>
private void LoadFilterData()
XElement xml = XElement.Load("filter.xml");
XElement entitiesElement = xml.Element("entities");
foreach (XElement entityElement in entitiesElement.Elements("entity"))
_validEntities.Add(entityElement.Value.ToLowerInvariant());
/// <summary>
/// /Use filter entity list to determine if the entity class should be generated.
/// </summary>
public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
//All other methods just use default implementation:
public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
return _defaultService.GenerateAttribute(attributeMetadata, services);
public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
return _defaultService.GenerateOption(optionMetadata, services);
public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
return _defaultService.GenerateOptionSet(optionSetMetadata, services);
public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
public bool GenerateServiceContext(IServiceProvider services)
return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
<entity>systemuser</entity>
<entity>team</entity>
<entity>role</entity>
<entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you. -
Ora-04021: timeout occured while waiting to lock object.
I have upgraded the DB From 8.1.5 to 8.1.7 then 9.0.2
but while converting to 9i it gave a warning that
"some uncompiled objects were found".
now the DB works fine with every DDL and DML operation but when I edit any precedure or function it hangs for 4 to 5 mins and then show the following error
ora-04021: timeout occured while waiting to lock object.
when I shutdown the DB and restarts it then it allowes me to edit any founction or procedure or package only for one time,then again shows the error when I try to edit second time.
what my be the reason , can any body help me pl.
thankx in advance.If you have oracle metalink support, then, read Note:169139.1. If not, give me your email id, i will send you the note.
SJH -
Ora-04021 timeout occurred while waiting to lock object
Hai All
When adding a column into a table then an error comes error
Error Message:
ORA-04021: timeout occurred while waiting to lock object .....
How it happens ...what is the solution....please help
Shiju..Hi
Identify the session that is using this object, kill it and then perform the ALTER table... or wait until the session that is accessing this table release it.
Rgds
Adnan -
Error while creating user on Unix through OIM timeout waiting for user password
Hello all ,
we made integration with Unix using connector , while creating user we receive the following error
<Jun 27, 2013 1:30:14 PM AST> <Error> <ORACLE.IAM.CONNECTORS.ICFCOMMON.PROV.ICPROVISIONINGMANAGER> <BEA-000000> <oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : createObject : Error while creating user
org.identityconnectors.framework.common.exceptions.ConnectorException: Exception occured while setting the password.org.identityconnectors.framework.common.exceptions.OperationTimeoutException: Command timed-out while waiting for: new[\s](unix[\s])?password:
at org.identityconnectors.genericunix.GenericUnixConnection.setUserPassword(GenericUnixConnection.java:866)
at org.identityconnectors.genericunix.operation.GenericUnixCreate.setUserPassword(GenericUnixCreate.java:193)
at org.identityconnectors.genericunix.operation.GenericUnixCreate.analyzeResult(GenericUnixCreate.java:233)
at org.identityconnectors.genericunix.operation.GenericUnixCreate.createOp(GenericUnixCreate.java:180)
at org.identityconnectors.genericunix.operation.GenericUnixCreate.create(GenericUnixCreate.java:111)
at org.identityconnectors.genericunix.GenericUnixConnector.create(GenericUnixConnector.java:200)
at org.identityconnectors.framework.impl.api.local.operations.CreateImpl.create(CreateImpl.java:80)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:93)
at $Proxy363.create(Unknown Source)
any one can support me how to fix thisTry increasing the commandTimeout from 100seconds to 200seconds and see if this works?
Also, look at the Section 5.2.5 in the connector doc.
Maybe you are looking for
-
Hi, I downloaded an itunes update to my windows vista pc a couple of days ago. Now I cannot open itunes because I am told that MSVCR80.dll can not be found. What is my best course of action please?
-
Premiere Elements stops playing timeline randomly
Hi, since some days, Premiere Elements 10 stops randomly the replay of the timeline. Sometimes after 1 second, sometimes 20 seconds. And always on different positions ... between to cuts, at a transition, ... not reproducible. I'm using PE10 for year
-
PROBLEM-WILL NOT CONVERT PDF TO EXCEL, ONLY WORD
NEED HELP ASAP
-
Notification Settings don't stick
I'm running Yosemite (10.10) I have 3 Macs and this happens on all 3. (mid 2011 Macbook Air 13", Late 2013 iMac 27", 2013 Macbook Air Retina 15") I go into Notification settings and then click on Messages. I change the Messages alert style from Ban
-
HOW TO MANAGE THE SESSION IN JSF 2.0
Hi to All. I need your help, I am beginner in JSF 2.0, and wanted to know how the sessions work on jsf 2.0?. If you could send a small example. I need my web application is safe, for example I have a web page users.xhtml to this web page must be ente