Timer problems on Linux changing system time and data

On Linux SO,
both with flash player plugin and standalone flash player, setting system time with command:
date -s 11:11:11
hang timers (flash.utils.Timer) immediately!

I notice that updating system time (both with "date -s hh:mm:ss" and through ntpd) with a new time in the future doesn't hang up flash.utils.Timer component.
Contrary, if I update system time with a past new one, flash.utils.Timer stops work immediately!!!
This is huge problem for those interfaces that need to run for a long time and also need to be time updated (for examplem through ntp daemon).
Can anyone help me?
PS: Windows Flashplayer doesn't have this problem !!

Similar Messages

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

How to get System Time and Date?

Hi, may i know how do i get the System's current Time and Date?? And i need to format them into 2 separate String, that's Time is a String, Date is another String. Pls guide me. Thanks a lot!

What's the problem? The previous example was pretty clear. Just adapt it to your purposes...
        Date currentDateAndTime = new Date();
        SimpleDateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy");
        SimpleDateFormat timeFormat = new SimpleDateFormat("HH:mm:ss");
        System.out.println(dateFormat.format(currentDateAndTime));
        System.out.println(timeFormat.format(currentDateAndTime));

Time and date settings change when phone is powered down (not shut off)..

I recently installed the iOS 8 update and immediately noticed that the time and date settings would change when I powered down my iPhone. I did not turn off my phone, only clicked the button to power down or save power. I have tried all the fixes, suggestions, etc., but I am still having issues. In the power down state, I am able to receive phone calls or texts but when I go into my phone, the time and date will be off. It stops from the moment I click the button to power down the phone. Please don't get this confused with turning off the phone completely. This happens when I click the button for power down or power save, however it is described.
So, how do I fix it? Is the app/software for the clock the problem? Is the battery distribution the problem? For some reason, in power down mode, the clock is not receiving constant power in order to keep accurate time. It stops the moment I click the button. Any suggestions? fixes, etc. I could try. Apple support techs were absolutely no help what-so-ever.

This sounds exactly like what is going on with my phone, http://www.idownloadblog.com/2012/10/19/iphone-5-date-time-glitch/

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

Time and date problems

Since I updated my iTouch to v 2.0, it's been having problems keeping the date and time. It usually reverts to 7 days ago and about 6 hours earlier. I had no problems when using v 1.1.4
Has anyone else had these problems?

In many cases, this occurs when you connect your iPod to the computer when iTunes has an incorrect backup date. I recently experienced this issue as well, and was able to fix it with little difficulty. Here's what I did.
1. Disconnect your iPod from the computer.
2. Make sure that the time and date on your computer is correct.
3a. In iTunes, go to Edit => Preferences => Syncing.
3b. You should see your device listed there, along with that same $#%& incorrect date and time. Select it and press "Remove Backup".
4. Close out of and reopen iTunes.
5. Reconnect your iPod. It will create a new backup to replace the one you just deleted, with the (hopefully) correct date and time, and your iPod's date and time will change to mirror that of your computer's.
I hope that helps!

Ipod touch always changes the time and date when synced

Since I got my touch, even before any updates etc, every time I sync it the time and date changes, usually back about a week or so. Anyone else got this problem or any solution as its really annoying me. A cutting edge bit of kit that has practically every function that works so well and the clock and calendar cant keep time? weird....

Not true in all cases, I updated to 2.0 and had 2 problems: One App had a Bug *NOT Apple`s fault*, and the second was another App ( again, not Apples fault ) that went back to home screen after opening. This was solved by a simple reset ( I have the first batch of Touches, 16 gb ). And the battery thing, I haven`t noticed it at all, I have an almost full charge, and have been using it for 4 days, never shut it down, only sleep mode when not in use.

Time and Date keeps changing

Every time I connect my ipod touch 2.1.1 the date and time keeps changing. is it a glitch? i also tried restoring my ipod but it didnt help, so please fix this

Thanks. This solves the time and date issue. But I still have a problem when I do the following: Settings>General>Time & Date, then the main screen (with all of the icons) is displayed, I never see the time, date screen, it goes back after about 1 second to main screen The same thing happens when I do the following: Settings>Mail, Contacts, Calendar>I then scroll to the bottom of the page and I get the main page again. I never get to touch on contacts or calendar, only mail. Please help.

IPhoto time and date problem

I cannot change the time and date on pictures just imported. So far I am back to 1795. Is anyone else having this problem?

Try boot into Safe Mode and try again.

Has anyone else had issues with changing how the time and date look on the status menu in Mavericks?

I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.

There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
I'm guessing Apple thinks only Time Travellers need to ask what year it is...

Capturing system time and date and the time difference and date difference.

Hello Experts,
i have a requirement the i need to capture select query start time and date as i runthe program on midnight (ie) 11:55 p.m.
I tried system fields sy-datum and sy-uzeit for capturing the system date and time when my program runs but it gets reset when the date changes.
i tried get time field option but it is resetting the sy-datum to zero so i am able to capture the date of the next day and resulting in wrong calculation of time .
please help with your valuable answers.
Thank you,
Srinivas.

Hi,
As per my understanding you want to fetch those data which are created between the program last run date time and current date time.
If I am right please follow the below procedure.
1. Create one custom table to store program name and program execution last date time
2. at event INITIALIZATION populate to fields date and Time using the statement sy-datum
initialization.
v_curr_time = sy-uzeit. " Current time
v_curr_date = sy-datum. " Current date
3. Get the last run date and time from the above custom table.
4. Do your logic.
5. at last Update the custom table with current date and time based on the step two (Here do not take sy-datum like that, take the value in the global variable populated in step 2)
Thanks
Subhankar

Random Clock Time and Date Changes

My clock time and date changes randomly. I have reset the iPhone and updated its software but it still changes. Can anyone help?

That just happened to me too! It started yesterday April 27 and did it today too. I think it changes around like 1pm-1:15pm. In order to get it to change back to the right time, I just turn off my phone then turn it back on. But that doesn't fix the problem. I don't know why its doing this! :[

HT5706 My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help

My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help...has anyone else had these problems?

Hi i ran into the same problem Ithoght it was the control, i changed the batteries the the control, and stil did not work, in the same connection (network and everything) i installed a new one and it worked perfectly, i can deduct the unit is nit working properly

How to get system time and date with PHP

Dear Mr.Craig,
Thanx a lot. We are running SRM 5.0 (RAMP - Implementation).
My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it?
Regards,
Deva.

Perhaps that will help.
[code]
<html>
<h1>Access System time and date</h1>
<?
     // saprfc-class-library
     require_once("saprfc.php");
     $sap = new saprfc(array(
   "logindata"=>array(
   "ASHOST"=>"localhost"          // application server
   ,"SYSNR"=>"00"                    // system number
      ,"CLIENT"=>"000"               // client
      ,"USER"=>"bcuser"               // user
      ,"PASSWD"=>"minisap"          // password
     ,"show_errors"=>false               // let class printout errors
     ,"debug"=>false)) ;                     // detailed debugging information
     $result=$sap->callFunction("MSS_GET_SY_DATE_TIME",
        array(     array("EXPORT","SAPTIME",array()),
           array("EXPORT","SAPDATE",array())));
     if ($sap->getStatus() == SAPRFC_OK) {
    echo "Time: ".$result["SAPTIME"];
    echo "<br>Date: ".$result["SAPDATE"];
    echo "<br>or<br>";
    echo "Server is showing: "
         .substr($result["SAPDATE"], 0, 4)
         ."-".substr($result["SAPDATE"], 4, 2)
         ."-".substr($result["SAPDATE"], 6, 2)
         ." and "
         .substr($result["SAPTIME"], 0, 2)
         .":".substr($result["SAPTIME"], 2, 2)
         .":".substr($result["SAPTIME"], 4, 2);
     } else {
          $sap->printStatus();
     $sap->logoff();
?>
[/code]

How can I change the language of the time and date and numbers?

Hey
I bought the iPhone 5 and when I setted the settings I chose the country where I live now but the time and date and other numbers because in the language of the country and not in the language that I chose which Is english
so how can I change them?

Go to settings >> general and checkout keyboard, international and date & time.

Timer problems on Linux changing system time and data

Similar Messages

Maybe you are looking for