Tips for using clock in/out mass approval report in the portal.

Currently there is no standalone application for mass approval of the time corrections. There is no seperate workflow template for Clock-In/Out Corrections as well. So its suggested to copy the standard leave request template WS12300111 and use it for Clock-In/Out Corrections.
Usually the volume of the Clock-In/Out Corrections for approval are large. So the report RPTCORAPP is provided for mass approval of all the Clock-In/Out Corrections pending for the manager in the backend. This report can also be used in the portal in the following way. Before proceeding, I will take up an example :-
Let us assume that we are using a custom WF template 'WS99900013' for clock in/out corrections which is a copy of the standard LeaveRequest template WS12300111. The approval task is 'TS99900043' which used for approving the workitems.
Below are steps to configure the RPTCORAPP in the portal:-
1. Change the task 'TS99900043'  to point to a DUMMY method. i.e. create a DUMMY method and make the task to point to the method.
2. Save and activate the workflow.
3. Create an i-view in the portal which calls the report RPTCORAPP directly.
4. In the UWL xml file change the attributes of the task 'TS99900043'  to call the PCD of that iview directly.
5. Upload the modified UWL XML file and re-register the workitems to sync it with changes of the task 'TS99900043'  in the backend.
6. Test the application.
Please note that the application is tested across all the scenario known to me. There might some scenario which are unknown to me, in which some issues may crop up. So I would suggest to to take a backup of the current WF template and UWL xml
file before implementing the above changes.

Hi,
Checked everything and it seems fine. Any other ideas where i should looking?
Regards

Similar Messages

  • The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

    The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

    Guys, i am actually trying using a solution provided by the article shared by dominic23,
    It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
    So in my home, we have such device that could clean the air using ion, and i am using it in my room...
    Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
    Thanks again dominic23

  • Tips for using Galil Tools with Labview

    This post is not a question, but below is a link to Galil's site that provides various methods and tips for using Galil's software for communicating with their controllers using LabVIEW. Hopefully it will assist others in the future.
    http://www.galilmc.com/techtalk/software/using-labview-with-the-galiltools-communication-library/
    Enjoy!
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

    Thank you very much!
    This is the information I was looking for.

  • I am setting up ipads for use in an elementary, and I would like the "home screen" to be the apps, rather than the default with the chat, mail, etc icons.  how do I change that?

    Can anyone answer this question?
    I am setting up ipads for use in an elementary, and I would like the "home screen" to be the apps, rather than the default with the chat, mail, etc icons.  how do I change that?

    Depending on exactly what you want to do, there are a couple of ways of handling this. You may want to access teh user guide for some ideas: http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    In particular, check the sections on Customizing iPad and Settings > Restrictions.

  • Will the iPhone 5c be abel for use with a Norvegian operator if I buy the phone in the US?

    Will the iPhone 5c be abel for use with a Norvegian operator if I buy the phone in the US? Im going on a vacation to USA in a few days, and i dont know when the phone will come to norway, so if it's possible, i would like to buy it in the US! Is it then possible for me to use it in Norway when i get back with a Norvegian operator?

    Jules Francis,
    The model numbers are different and each is carrier locked to their respective carriers.
    Even if they were not, the £269 price in the UK includes VAT. The price without VAT is £228.94
    The price in the U.S. Store does not include sales tax. Last time I checked sales tax in New York City is 8.375%.
    If you compare the pre-tax prices the difference is approximately £24. The rest of the difference is taxes.
    Hope this helps,
    Nathan C.

  • MDM Record Check out and Check in from the Portal

    Hi everybody,
    I'm trying to figure out what is the standard way to trigger the Check out and Check in from the Portal.
    How do I need to configure the MDM workflows and the Portal, so the standard Item Details iView would automatically check out the record when the Edit button is pressed.
    Do I need to configure Guided Procedures or UWL on the Portal or can I avoid that?
    Thanks for your help in advance,
    Boris

    Hi Boris,
    When we connect MDM to a front end system like Portal,the portal will replicate all teh functionalities of the backend sytem from the front end as in this case in EP.
    But when we maintain Master data form the MDM Data Manager we get a lot of options in the context menu ,when we right click a record in the record pane.
    All of these cannot be made available on the portal,but however the feature of Checkout can be made possible if you try to update the record  through a MDM workflow.
    As in MDM workflow you have to option of Checking ou the record at the beginning of the Uddate and then checking in back at the completion of the record update.
    For this you can use the MDM workflows and integrate it through EP using UWL.
    Kindly refer some additional docs which will guide you in the configuration of the same:
    Re: MDM workflow with UWL
    Re: Need to Integrate Universal Worklist in SAP Master Data Management.
    Re: MDM Portal configurations.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Any tips for using the battery ? T500

    Are there any tips to use the battery for a long time ?
    I've seen the posts somewhere that "conditioning" is not needed for this battery, Li-on based ?
    Is recharging when the battery is half-charged a bad habit ?
    Thanks

    Hello shong9,
    First you should load your battery 36h, then unload it normally, till it will go to sleep or hibernate
    (depends on setting in power manager).
    Second load it 24, then unload it normally till it went to sleep or hibernate.
    Third and last, load it 12h, then unload it normally till it went to sleep or hibernate.
    Then you battery has got it´s full capacity and the powermanger will do all for you, to keep it healthy.
    You should leave the battery in your machine, if using AC.
    When you are working mobile, then charge it, when it´s necessary. 
    That´s it.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Tips for Using Pages to Write a Short Book?

    Hello- I really don't wanna go back to Word.
    My needs are pretty simple. A short book in 5.5 x 8.5 format (standard, right?).
    Any tips to using (setting up) pages to write a book? Any ideas where to get good templates for this?
    Thanks.

    ePub requires HTML
    Thoughts on that plan?
    For paper-based exchange, Peter's point is that preparing the printing surface encounters problems in Apple's support for ISO 15930 PDF/X-3. Peter also wants support for spot colours which Apple development has resisted for as long as I can remember, and with good reason .
    For paper-less exchange, Apple's implementation of PDF has the problem that it does not support search for glyph substitution, that is, it neither supports search for Apple Advanced Typography (AAT) nor does it support search for Microsoft OpenType Layout (OTL).
    For paper-less exchange, furthermore, whether one is working in a document markup model (SGML implementations such as HTML, ePUB) or a document mastering model (PDL implementations such as PDF, XPS) the audience interacts with the authors input of character information in order to identify and download the digital document, and then image the digital document on a digital graphic device (display, printer). This means that the input of character information must be configured for assumptions compatible between author and audience. It is possible to do a long list of things in the Apple Character Palette that will cause the audience complications in searching for the digital document whether offline on a local computer or online in a distributed network of computers.
    Best,
    Henrik

  • Tips for using 3D camera to avoid maximum size issues?

    Hi
    I'm doing a project with lots of camera moves, and type flying past camera, but i'm getting constant 'the maximum size is 4096x4096' issues, even to the point where some projects freeze when i open them. What are good practices to avoid these issues when using entirely 3D scenes?
    Thanks alot guys
    aaron

    Just to explain a bit more. Basically i'm not using any hires images, all i'm doing is moving text that is used as a particle very very close to the camera (effectively zooming right into the letterforms), and the text has a particle trail (over other text). Everytime i get close to the letterforms, i get the dreaded 'the image is too large' error message. Is there any way i can avoid this when trying to zoom in close to stuff?

  • Unlocked old iPhone 3GS for use with pay as you go sim in the UK on vacation. O2 sim works while ph plugged in.  Unplugged, works short time and crashes.  Sometimes won't even re-boot.  Software on phone up to date as far as 3GS goes.

    I brought an old IPhone 3GS to the UK on vacation for use with sim card.  I had the phone unlocked with approval and instructions from ATT.  Store in the UK recommended O2 pay as you go sim which works as long as the phone remains plugged into the wall.  Once unplugged, it will work for a short time and then always crashes.  Sometimes it will re-boot and crash again and sometimes it will not re-boot at all.  One store told me to sync with itunes which I did on my Mac Book.  I don't know if the sim is defective or if the software of the 3GS is just not compatible with the sim when on the battery.  I have updated the software on the phone as far as it will go.  Any suggestions?  Maybe the phone is too old to use with the latest pay as you go sim cards.  I am disappointed that this phone has not been reliable as a pay as you go and I have had to purchase a UK phone here in order to have a reliable phone.

    There is nothing you can do. You bought an illegally unlocked phone off Ebay. A lot of sellers there will tell you it is unlocked but the first time you try to update the operating system it will put the lock back on to the carrier the phone was originally locked to. Sorry but unless the carrier it was locked to will unlock the phone I am afraid you have a very expensive paper weight now. You should have bought it from a reputable dealer instead of ebay.

  • Clock-in/out runtime error in Netweaver UI5 portal

    Dear Experts
    Following error is runtime error for the service clock-in/out in the portal
    when i click on the service,i m getting the runtime error(in ST22)
    Category                        ABAP Programming Error
    Runtime Errors              MESSAGE_TYPE_X
    ABAP Program             SAPLPT_COR_REQUEST_UIA
    Application Component  PT-RC-TE
    Date and Time              12.09.2014 16:45:43
    Error analysis
        Short text of the error message:
        No Customizing E
        Long text of the error message:
        Technical information about the message:
        Message class....... 53
        Number.............. 999
        Variable 1.......... No Customizing
        Variable 2.......... E
        Variable 3..........
        Variable 4.......... " "
    please help.
    what should i do, to fix this error

    thank you
    this issue is solved!

  • Is my Droid Razr Maxx xt912 locked for use with another carrier's SIM - either in the U.S. or globally?

    Is the Verizon Droid Razr Maxx XT912 locked to prevent using another carrier's SIM in the U.S.?  Is it blocked to prevent use of another carrier's SIM outside the U.S.?
    Thanks

        Hi MattFlash, that is a great questions and I would be happy to help! The good news is that all of our 4G devices would be unlocked and ready for use with another carrier, so the Maxx is ready to go. If you would like to use another carriers service you may need their SIM card and would then need to follow their activation procedures. Hope this helps!
    AdamG_VZW
    Follow us on Twitter @VZWSupport

  • How to Find out who is login into the Portal.

    Hi Friends ,
    I have one doubt  Now I have one Requirement. i.e.
    How many members (users) login in to the Portal?
    In what time they login into the portal?
    How many times hits the iView in  Portal?
    Who is last login into the portal?
    I have find out these details by using these details I will create one Iview.
    How to find these details. By using these details I will created one iView. Kindly  let me know.
    Could you tell me those
    1.     Is it creating Portal Activity Report iView in Portal?
    2.     By using WDJ Application we can create one Application. By using this application we can create iView?
    Regards
    Vijay Kalluri

    Hello Vijay,
    If you are interested in a 3rd party application with all the stats you need and more, check out Click Stream by Sweetlets. Easy to download and user friendly with many key reports quickly accessible. It also answers some of the questions you had above a whole lot simpler than anything else out there or any other route you had in mind.
    In the very near future Click Stream will also have iView recording to monitor iViews, telling which iViews have been clicked, etc. Also, the one you were looking for, "who the last login into the portal", will soon be added.
    Click Stream uses the Usermanagement (UME) API to get more information about the user, groups, roles, LDAP attributes etc. and offers you the ability to use such information for filtering within any report.
    Click Stream also uses the PCD API to get information about the pages your users are visiting.
    Here are some reviews on the SAP EcoHub from people who have used it: http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream
    Please just let me know if you have any question or if you are open to test drive Click Stream. We will certainly help as best as we can.
    Good luck.

  • Use more than one look and feel in the Portal

    Hi,
    I'm searching for a solution to use more than one Theme in the portal. It's not based on user or a role. One and the same user should be able to enter the portal and depending on his adress he should be rooted to A or B theme.
    We are usein EP6 sps13.
    Kind regards
    Michiel Veenemans

    Hello,
    To my feeling you should be work with display rules.
    You probably have user who need one theme and other user you want to give another theme. By using display rules you can assign a theme to one user group and another theme or themes to another group.
    So depending on the group the user is assigned to you get another theme. This way everybody uses the same URL and a theme can be altered with the default user functions.
    Best regards,
    Frederik

  • A Tip for using EJB 3.0 with WebLogic Ant Tasks

    I started out writing this up as a problem, but then I found the answer so I'm, posting a tip instead.
    When I tried to write an EJB [stateless] using EJB 3.0 in my legacy Weblogic ear project I started getting this error:
    <pre>
    No EJBs found in the ejb-jar file 'test'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
    </pre>
    This is why: wlcompile will put the class files in the App-Inf/classes directory unless it finds an ejb-jar.xml file in the META-INF directory for the module it is working on. With EJB 3.0, I wasn't using an ejb-jar.xml file because it was unnecessary. Later, Appc runs and it complains <b>because there are no classes module directory, they went into the shared ear folder instead.</b>
    Here's I how it working again: Use javac [not wlcompile] to compile the EJB 3.0 module and make sure that the class files go into the correct module directory. Then you can use wlappc to generate all the associated files for the EJB. I have sucessfully deployed an ear file that uses both EJB 2.x and EJB 3.0 with this approach.
    I wish Weblogic's own ejb3.0 sample application used their split directory deployment.
    Good Luck.
    John Aronson

    Hi John,
    I am working on development an enterprise application using EJB 3.0 on Weblogic 10.
    While developing, I am keeping all my classes (from ejb's as well as web) into APP-INF/classes directory. It is working fine for Web and ejb 2.0 packages, but ejb 3.0 packages, I get the following error when I keep my ejb 3.0 beans classes in APP-INF/classes directory.
    No EJBs found in the ejb-jar file 'customer'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
    One solution is to keep the classes under customer ejb directory, but I wan tto keep all the classes in APP-INF/classes directory so that when using Eclipse IDE I can output all compiled sources into APP-INF/classes directory.
    Has anyone faced this situation? Any suggestions to fix this issue?

Maybe you are looking for