Title in motion starts fast and ends slow... need to make it consistent across the motion. Deadline is very soon! help!

I made a title, and used the motion tool (position and scale) in effect controls to move it across the screen, while making it bigger. When I see the motion at hand, it starts very fast and ends very slowly... how do I edit the speed of that motion? working with Mac BTW. HELP

Control it with Key Frames.
If you have applied  no KFs it should be linear (constant) already.

Similar Messages

  • In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

    <header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
    </header>
    I'm doing SP app development and have the following problem.
    I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
    in the form.
    function AddCalendarListItems() {
    var SD = document.getElementById("datepicker1").value;
    var SThh = document.getElementById("St1").value;
    var STmm = document.getElementById("St2").value;
    var ED = document.getElementById("datepicker2").value;
    var EThh = document.getElementById("Et1").value;
    var ETmm = document.getElementById("Et2").value;
    var T = document.getElementById("Title").value;
    var S1 = SThh;
    SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
    ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
    //alert("SD= " + SD + " , ED= " + ED);
    var siteUrl = SiteCollurl + "/SharePointApp11";
    var clientContext = new SP.ClientContext(siteUrl);
    var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
    var ListItemCInfo = new SP.ListItemCreationInformation();
    var newEvent = oList.addItem(ListItemCInfo);
    newEvent.set_item("Title", T);
    newEvent.set_item("EventDate", SD);
    newEvent.set_item("EndDate", ED);
    newEvent.update();
    clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
    function onQueryAddCalendarSucceeded2(sender, args) {
    alert("Success");
    function onQueryAddCalendarFailed2(sender, args) {
    alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
    But I receive the following error:
    Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
    I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time]  exist but do not exist at the Site Column level.
    Please advise.

    Hi Khojasteh,
    Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
    If it isn’t the issue, please debug the code, in which line the error occurs.
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • Calculate duration between start date and end date

    Hi everyone,
    I'm facing with problem when calculating duration between start & end with this function below . This fuction  is working well, but i want to change working time from 8:00 am to 17:30 pm instead of 17:00 , and lunch time from 12:00 to 13:30 instead
    of 13:00 as present . Problem is , i changed data type of start hour and end hour from INT to decimal . But it is still wrong .
    Pls help me . It's very urgent bcoz i need it for monthly report .
    Many thanks .
    Here is function which im using :
    ALTER Function [dbo].[GetWorkingMin](@pStartDate DateTime, @pEndDate DateTime) Returns Int
    AS
    Begin
          Declare @StartDate DateTime = @pStartDate
          Declare @EndDate DateTime = @pEndDate
        Declare @WorkMin int = 0   -- Initialize counter
        Declare @Reverse bit       -- Flag to hold if direction is reverse
        Declare @StartWorkingHour int = 8   -- Start of business hours (can be supplied as an argument if needed)
        Declare @EndWorkingHour int = 17    -- End of business hours (can be supplied as an argument if needed)
        Declare @Holidays Table (HDate DateTime)   --  Table variable to hold holidayes
          Declare @LunchHour int = 12
          Declare @StartHour int = DatePart(HH, @StartDate)
          Declare @EndHour int = DatePart(HH, @EndDate)
        -- If dates are in reverse order, switch them and set flag
        If @StartDate>@EndDate
        Begin
            Declare @TempDate DateTime=@StartDate
            Set @StartDate=@EndDate
            Set @EndDate=@TempDate
            Set @Reverse=1
        End
        Else Set @Reverse = 0
        -- Get country holidays from table based on the country code
        Insert Into @Holidays (HDate) Select HDate from HOLIDAY Where HDATE>=DateAdd(dd, DateDiff(dd,0,@StartDate), 0)
        If DatePart(HH, @StartDate)<@StartWorkingHour
        begin
                Set @StartDate = DateAdd(hour, @StartWorkingHour, DateDiff(DAY, 0, @StartDate))  
                -- If Start time is less than start hour, set it to start hour
                Set @StartHour = DatePart(HH, @StartDate)
        end
        If DatePart(HH, @StartDate)>=@EndWorkingHour
        begin
                Set @StartDate = DateAdd(hour, @StartWorkingHour+24, DateDiff(DAY, 0, @StartDate))
                -- If Start time is after end hour, set it to start hour of next day
                Set @StartHour = DatePart(HH, @StartDate)
                --return DatePart(day, @StartDate)
        end
        If DatePart(HH, @EndDate)>=@EndWorkingHour
        begin
                Set @EndDate = DateAdd(hour, @EndWorkingHour, DateDiff(DAY, 0, @EndDate))
                -- If End time is after end hour, set it to end hour
                Set @EndHour = DatePart(HH, @EndDate)           
        end
        If DatePart(HH, @EndDate)<@StartWorkingHour
        begin
                Set @EndDate = DateAdd(hour, @EndWorkingHour-24, DateDiff(DAY, 0, @EndDate))
                -- If End time is before start hour, set it to end hour of previous day
                Set @EndHour = DatePart(HH, @EndDate)
        end
        If (@StartHour>=@LunchHour and @StartHour < (@LunchHour +1))
        Begin
                Set @StartDate = DateAdd(hour, @LunchHour + 1, DateDiff(DAY, 0, @StartDate))
                -- If Start time is in lunch time, set it to 12
                Set @StartHour = @LunchHour + 1   
        End
        If (@StartHour>=@LunchHour and DatePart(DW, @StartDate) = 7)
        Begin
                Set @StartDate = DateAdd(hour, @StartWorkingHour + 24, DateDiff(DAY, 0, @StartDate))
                Set @StartHour = DatePart(HH, @StartDate)
        End
        If (@EndHour>=@LunchHour and @EndHour < (@LunchHour +1))
        Begin
                Set @EndDate = DateAdd(hour, @LunchHour +1, DateDiff(DAY, 0, @EndDate))
                -- If End time is in lunch time, set it to 13
                Set @EndHour = @LunchHour + 1
          End
          If (DatePart(DW, @EndDate) = 7 and DatePart(HH, @EndDate) >= @LunchHour) Set @EndDate = DateAdd(hour, @LunchHour, DateDiff(DAY, 0, @EndDate)) -- If End day is Saturday and End time is after end hour, set it to end hour of saturday
        If @StartDate>@EndDate Return 0
        -- If Start and End is on same day
        If DateDiff(Day,@StartDate,@EndDate) <= 0
        Begin
            If (Datepart(dw,@StartDate)>1 And DATEPART(dw,@StartDate)<7)  
            -- If day is between sunday and saturday
                If (Select Count(*) From @Holidays Where HDATE=DateAdd(dd, DateDiff(dd,0,@StartDate), 0)) = 0  
                -- If day is not a holiday
                    If @EndDate<@StartDate Return 0 Else
                    Begin
                                  Set @WorkMin=DATEDIFF(MI, @StartDate, @EndDate)
                                  -- Calculate difference
                                  If (@StartHour <= @LunchHour and @EndHour >= @LunchHour + 1)
                                        Set @WorkMin = @WorkMin - 60;                                   
                            End
                Else Return 0
            Else Begin
                      if (DATEPART(dw,@StartDate)=7) set @WorkMin = @WorkMin + DATEDIFF(MI, @StartDate, @EndDate);
                      Return @WorkMin
            End
        End
        Else Begin
            Declare @Partial int=1   
            -- Set partial day flag
            While DateDiff(Day,@StartDate,@EndDate) > 0   
            -- While start and end days are different
            Begin
                If Datepart(dw,@StartDate)>1 And DATEPART(dw,@StartDate)<7    --  If this is a weekday
                Begin
                    If (Select Count(*) From @Holidays Where HDATE=DateAdd(dd, DateDiff(dd,0,@StartDate), 0)) = 0  -- If this is not a holiday
                    Begin
                        If @Partial=1  
                        -- If this is the first iteration, calculate partial time
                        Begin
                            Set @WorkMin=@WorkMin + DATEDIFF(MI, @StartDate, DateAdd(hour, @EndWorkingHour, DateDiff(DAY, 0, @StartDate)))
                            If (@StartHour <= @LunchHour) Set @WorkMin = @WorkMin - 60;
                            Set @StartDate=DateAdd(hour, @StartWorkingHour+24, DateDiff(DAY, 0, @StartDate))
                            Set @Partial=0
                        End
                        Else Begin     
                        -- If this is a full day, add full minutes
                            Set @WorkMin=@WorkMin + (@EndWorkingHour-@StartWorkingHour - 1)*60        
                            Set @StartDate = DATEADD(DD,1,@StartDate)
                        End
                    End
                    Else Set @StartDate = DATEADD(DD,1,@StartDate)  
                End
                Else Begin
                            If (DATEPART(dw,@StartDate)=7)
                            Begin                   
                                  Set @WorkMin = @WorkMin + DATEDIFF(MI, @StartDate, DateAdd(hour, @LunchHour, DateDiff(DAY,
    0, @StartDate)));
                            End
                            --Set @StartDate = DATEADD(DD,1,@StartDate)
                            Set @StartDate = DateAdd(hour, @StartWorkingHour + 24, DateDiff(DAY, 0, @StartDate))
                                  Set @StartHour = DatePart(HH, @StartDate)
                      End
            End
            If Datepart(dw,@StartDate)>1 And DATEPART(dw,@StartDate)<7  
            -- If last day is a weekday
                If (Select Count(*) From @Holidays Where HDATE=DateAdd(dd, DateDiff(dd,0,@StartDate), 0)) = 0   
                -- And it is not a holiday
                    Begin
                                  If @Partial=0 Set @WorkMin=@WorkMin + DATEDIFF(MI, @StartDate, @EndDate) Else
    Set @WorkMin=@WorkMin + DATEDIFF(MI, DateAdd(hour, @StartWorkingHour, DateDiff(DAY, 0, @StartDate)), @EndDate)
                                  If (@EndHour >= (@LunchHour + 1)) Set @WorkMin = @WorkMin - 60;
                            End   
                If (DATEPART(dw,@EndDate)=7)
                Begin
                      Set @WorkMin = @WorkMin + DATEDIFF(MI, DateAdd(hour, @StartWorkingHour, DateDiff(DAY, 0, @EndDate)),@EndDate);        
                End
        End
        If @Reverse=1 Set @WorkMin=-@WorkMin
        Return @WorkMin
    End

    The problem is you cannot specify partial hours.
    I think your best bet would be to alter the function sufficiently so it will accept times instead of hours, and where you're making comparisons to the hour, use dates/date functions instead.
    Then, just set the variable as a full time (or datetime, if you need).

  • Time machine starts well, and then slow as cold molasses

    Hi All,
    I've scoured the net for clues, but no love.
    I've set up a new external drive for TimeMachine. I created a single partition with Disk Utility, formatted as HFS+ and told TM to use it for backups.
    Clicked go. Yay! Lots of data cruising along and after a short while 40GB of the 90GB backup is copied over.
    And then it stops... almost. Now it copies new data over at about 1mb per minute. Checked "top" and very little activity going on. Checked console and it reports no failures of backupd and in fact backupd uses a bit of CPU time every minute or so.
    In the last hour, about 80mb of data has been copied. I've opened the backup package file and am watching as each new file is copied over.
    I've shut everything down more than once and restarted. When I tell it to back up, it knows where it left off... does a lot of disk churning and then begins it's crawling copy again.

    Thanks for the replies. I've read about how it starts slow and later gets into a groove and picks up, but mine starts fast and flies along nicely and then grinds to a halt. I can open the package file and watch as a new file (say a 5mb video clip) gets backed up every minute or so.
    During the slow time, I can copy large files onto the drive quickly and easily, so it's not the drive, or the usb connection.
    Can TM go from fast to slow and back to fast? I guess I'll let it run overnight and report my results...
    Message was edited by: Awumba

  • Difference between Start Routine  and End Routine in Transformations

    Hi  Friends,
      I'm using BI 7.0... here in Transformations step  we have two options..that is START ROUTINE... and END ROUTINE... What is the Difference between Start Routine  and End Routine in Transformations..
       When  we go for Start Routine.. and when we go for End Routine..
    Plz clarrify... points will be rearded..
    thanks
    babu

    Hi,
    One real time scenario for End Routine.
    We have a scenario where in a datasource field is mapped to three infoobjects on the datatarget side. There are 2 key figures which need to get data after these these Infoobjects are filled. The best place for this to happen would be in a End Routine, where in we would loop through the results package and using the values of the infoobjects from the data target ( Cube in this case).
    Hope this helps,
    HD

  • ESS Working Time - Start Time  and End Time in Weekly View

    Hello,
    I'm having a problem with the business package ESS - functionality Working Time (cat2).
    I need that information to Start Time and End Time appear in the Weekly View of the portal.
    In Daily View that information are already visible, but In Weekly View that information does not appear.
    Does anyone have any suggestions?
    Thank you very much your attention.
    Att,
    Jair de Oliveira Junior

    Hi Bala
    You can have clock in and clock out in a weekly view.
    you have to change the data entry profile settings.
    In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
    And you can view the weekly entry in clock in and clock out.
    Ravee
    +91.99206.33669

  • Search on basis of start date and end date

    Hi,
    I have added two fields 'Start Date' and 'End Date' on a search page.
    I have done the VO extension also.
    Now, I have to implement search logic to get all the records created in between 'Start Date' and 'End Date' after pressing the 'GO' button on that page.
    Can anyone please provide guidance to extend the controller.
    Thanks in advance.
    Gaurav.

    Hi Anil,
    Thanks for ur reply.
    As per the link, I have written following code in the controller :
    package oracle.apps.irc.vacancy.webui;
    import oracle.apps.fnd.framework.OAApplicationModule;
    import oracle.apps.fnd.framework.OAViewObject;
    import oracle.apps.fnd.framework.webui.OAPageContext;
    import oracle.apps.fnd.framework.webui.beans.OAWebBean;
    import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
    public class xxVacancyCriteriaCO extends VacancyCriteriaCO
    public xxVacancyCriteriaCO() {}
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    // Pressing the Go button causes the search to be executed.
    OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
    OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXIrcVacancySearchCriteriaVO");
    if (pageContext.getParameter("Go") != null)
    String created = pageContext.getParameter("ViewDate");
    oaviewobject.setWhereClauseParam(0, created);
    oaviewobject.executeQuery();
    OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
    table.queryData(pageContext, false);
    But while compiling it, I am getting the error as :
    "Error(14,42): PerTransactionTopCOImpl not found in class oracle.apps.irc.common.webui.IrcOAControllerImpl in class oracle.apps.irc.vacancy.webui.VacancyCriteriaCO in class oracle.apps.irc.vacancy.webui.xxVacancyCriteriaCO"
    Can u please suggest where the mistake is?
    Thanks again.
    Gaurav.
    Edited by: Gaurav on Jan 14, 2011 12:51 AM

  • How to display absence start date and end date in workflow notification?

    Hi,
    I would like to display the absence start date and end date at
    1) Subject of workflow email notification/worklist notification OR/AND
    2) Content of workflow email notification/worklist notification.
    Appreciate if anyone can advise on this as this information is very crucial to our client.
    Thank you.
    Regards,
    Shiau Chin, Teo

    1) Subject of workflow email notification/worklist notification OR/ANDyou have to customize the subject of notification message. You can find the message using following query.
    SELECT message_type, message_name
       FROM wf_notifications notif
      where notification_id = <your notification>;> 2) Content of workflow email notification/worklist notification.
    its already there I think.

  • Function module to find start date and end date of fiscal year for company

    Hi,
    Is there any function module exist which will provide me start date and end date of fiscal year for company code and fiscal year provided?
    Thanks & Regards,
    Parag

    Hi,
    please check this link
    it would be very useful
    http://www.sapdevelopment.co.uk/fmodules/fms_fiscalyr.htm
    Thanks and regards
    durga.K

  • Hide the start time and end time in ESS portal

    Experts,
    We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal.  I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
    Please Advise.
    Best Regards,
    Martin Weakley

    Hi Martin,
    you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
    maybe this helps or gives you a helpful alternative to the already stated measures in this thread
    regards, Lukas

  • How to activate fields "Start Reason" and "End Reason" in "Contact" form?

    Hello all,
    We recently migrated HRMS from version 11.5.7 to *12.1.3*. In the previous version users filled the fields Start Reason and End Reason in the Contact form (PERWSDPC), section Contact Relationship.
    In our 12.1.3 version these fields are read-only and I can not figure out how to activate them.
    PS: I have populated the list of values that should be used in the above fields, using the form Life Event Reasons (Total Compensation: General Definitions: Additional Setup: Life Event Reasons) and setting the Type field value with Personal, but I don't know how activate the fields in Contact form.
    Any suggestions?
    Thanks
    Paolo Bertinetto
    Edited by: user3312880 on 7-gen-2013 2.11

    But in addition to entering values in *Life Event Reasons" form, there are other setup steps that have to be performed in order to use the two above fiields?                                                                                                                                                                                                                                                                                                                           

  • Org.Assignment Infotype start date and End date is getting wrong.

    Hi, When i create a new employee in PA40, in Org. Assignment infotype start date and end date is getting wrong. for eg. When i create an employee on 01.04.2014.    In org. assignment infotype its getting like this. 01.01.2014  to  31.03.9999  and 01.04.9999 to 31.12.9999  Two date entries are creating by default.

    Hi
    Check in the Table - T588Z : Dynamic Actions ,is there any custom routines causing the defaulting dates functionality.
    Thanks,
    Sreeram

  • Modelling Time Dimension with Fact Table containing Start Date and End Date

    Hi Gurus,
    I have a time dimension with Year till Date. I have a fact table which consists of Start Date, End Date, Person ID, Department ID.
    How do i design Time dimension with fact table the below scenario
    In the dashboard i have start Month and End month as prompts.
    In the report i need to display Count(Person ID) > Start Date and < End Date along the trend.
    For instance, i have selected Jan-2009 as start date and Apr-2009 as End Date, then i need to display Count(Person ID) of Jan-2009, Feb2009, Mar-2009 andApr-2009.
    I Can not connect Time dimension with only Start Date or only with End Date to get the trend along the months.
    Please advice on the issue which i am having.

    Hi,
    Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
    Can you please let know where i am going wrong.
    Thanks

  • How to create start date and end date

    Hi guys
    Need to create start date and end date as prompt in webi report.... how could it be possible please help me ...
    regards

    @Universe:
    Go to Condition/Filter:
    Definition: Date=@Prompt("Select Start Date",D,,mono/multi,free/constrained,...)
    OR @Select(Class\Object Date)=@Prompt("Select Start Date",D,,mono/multi,free/constrained,...)
    Parse it & Apply OK.
    Class/Object : If you have already object Date in any class already, use them.
    Follow the same for End date also.
    For both filters/prompts, check Apply on Universe
    @Report/Query:
    Drag [Date] object to Query filters section and in Operand say Prompt. Change text as Select Start Date & again drag [Date], this time say Select End Date.
    Hope it helps you alot.
    Gracias...!!

  • Updating start date and end date at header level for a contract

    As per the requirement I have to create a contract and assign the start date and end date to the contract.
    I am using BAPI_CONTRACT_CREATEFROMDATA for creating a contract. I am assigning value for start date and end date for header data of contract in fields
    -CT_VALID_F and CT_VALID_T of CONTRACT_HEADER_IN import parameter and also setting the corresponding indicator in CONTRACT_HEADER_INX parameter.
    The BAPI executes successfully and does not return any error but when I check the start date and end date for contract in va43 the values are not assigned.
    I also want to update the start date and end date for contract in other case for which I am using BAPI_CUSTOMERCONTRACT_CHANGE and passing date values to the same fields as those create but it give me an error while executing. The error is as follows:
    Field 'GUEEN' cannot be changed, VBAKKOM 2000000162 ready for input.
    Can anyone suggest what can be done for update the date values?
    Thanks in advance.
    Komal

    So are we... The BAPI BAPI_CONTRACT_CREATE has the following importing parameters:
    HEADER     TYPE     BAPIMEOUTHEADER
    HEADERX     TYPE     BAPIMEOUTHEADERX
    VENDOR_ADDRESS     TYPE     BAPIMEOUTADDRVENDOR
    TESTRUN     TYPE     BAPIFLAG-BAPIFLAG
    TECHNICAL_DATA     TYPE     BAPIMEOUTTECH
    Change the HEADER and HEADERX parameters as I have indicated in my first post.
    Regards,
    John.

Maybe you are looking for