TMSPE 1.2 Installation SQL Authentication Error
Hello,
I am trying to install TMSPE 1.2 with TMS 14.3.0. But when I get to SQL Server Credentials page, I get error 'Process must exist ..' as shown in pic below. I am sure the credentials are correct. Has anyone come across this before? Any help is appreciated.
Thanks,
I haven't ran across this, but I do see that there is no SQL Instance Name in your screenshot. Try putting SQLTMS in there and then click next and see what happens. Or if you know the name of your TMS database instance, put that in there.
Similar Messages
-
SQL Server Error when tryingt to install the CMS DB on SQL Server 2005 x64
I am trying to install BOEXI R3 on w2k3 64-bit OS in a SQL Server 2005 x64 database, I am currently at the installation step where i Specify an exisiting CMS database. I created a System DSN and tested it, and it was successful. So when I got to the screen where I select my datasource I had to check use trusted connection because the datasource would not show up when Use DSN created by WOW64 option was checked. From there I could select the database I created. Oh yeah, I also made the application server local system account part of my DB admins group so it has full access to the database yet when I click next to connect I get a CMS Database Error: STU000226. here is what I have in my log:
ThreadID Message
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: findDFA_LLR: (CmdLineDir) C:Documents and SettingsgsdadminDesktopBOEXI and BSM AnalyticsBOEXI R3 Full Version from SAPpackagedbcheck
sqlrule.llr
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: Loading: database subsystem only
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: loading libary succeeded
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: DatabaseSubsystem::Init()
(Thu Apr 23 20:57:46 2009) 3024 3028 (.wireobinit.cpp:96): trace message: Creating the shared CWireObject::PropertyNameMap
(Thu Apr 23 20:57:46 2009) 3024 3028 (.wireobinit.cpp:118): trace message: Setting static property map
(Thu Apr 23 20:57:46 2009) 3024 3028 (.wireobinit.cpp:125): trace message: CWireObject::InitializeStaticPropertyMap() - reference count: 1
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: initializing subsystem succeeded
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: Loading: done loading subsystem - database subsystem only
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: DatabaseSubsystem::Connect()
(Thu Apr 23 20:57:46 2009) 3024 3028 (.DBConnectionManager.cpp:802): trace message: DBConnectionManager - Setting total target number of connections for pool 0 to 1.
(Thu Apr 23 20:57:46 2009) 3024 3028 (.SQLServerDatabase.cpp:119): trace message: SQLServer error found: ErrorMessage( (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified), ErrorCode(0)
(Thu Apr 23 20:57:46 2009) 3024 3028 (.dbutils.cpp:820): trace message: Caught DatabaseSubystem Error: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOEXI_CMS". Reason: (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified
(Thu Apr 23 20:57:46 2009) 3024 3028 trace message: DatabaseSubsystem::Shutdown()
(Thu Apr 23 20:57:46 2009) 3024 3028 (.wireobinit.cpp:175): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
(Thu Apr 23 20:57:46 2009) 3024 3028 (.wireobinit.cpp:182): trace message: Releasing
static property map
How do I get past this?The workaround was, I installed the SQL Server Client tools and created a System DataSource and then had to create a user DataSource (it is a quirk in the installer I guess) to get past this point in the installation. Now I have an even bigger problem. Everything but the CMS installed and the installer hung at the "Configuring the CMS" part. The installation finished but when I tried to log into the Central managment console I got this error:
Error: Server GSD-RRPT-RDC:6400 not found or server may be down (FWM 01003) null
I looked at the forums for the cause of this error and came to the conclusion that BOEXI does not support an installation on SQL Server 2005 when using Integrated Authentication to the SQL Server. See the engineers here disabled SQL Authentication for the SQL Server and will not allow it.
Is this true? Or is there a workaround to install the CMS using Integrated Authentication in the DataSource ?
Thanks. -
While trying to connect to Oracle database 11g from SQL developer (Error)
Hi Guys,
Installed OIM in virtual machine with Windows 2008 and when trying to connect to Database after completing installation receiving with Error ' No more data to read from socket'
Vendor code : 17410. can anybody give suggestion on this.
thanks
sri485.yes i tried connecting DB directly its working fine and i tried select * from DUAL it displays 2 . VMware with OIM working fine in my system and when i copied the same VMWARE file to other system and i tried running OIM and connecting to DB it not working.
log trace:
<Aug 21, 2012 2:28:56 PM BST> <Warning> <DeploymentService> <BEA-290014> <Inval
d user name or password.>
<Aug 21, 2012 2:28:58 PM BST> <Error> <OIM Authenticator> <BEA-000000> <Error s
tting SQL Hint java.sql.SQLException: Unable to start the Universal Connection
ool: oracle.ucp.UniversalConnectionPoolException: Error during pool creation in
Universal Connection Pool Manager MBean: oracle.ucp.UniversalConnectionPoolExce
tion: Error during pool creation in Universal Connection Pool Manager: oracle.u
p.UniversalConnectionPoolException: Universal Connection Pool already exists in
the Universal Connection Pool Manager. Universal Connection Pool cannot be adde
to the Universal Connection Pool Manager>
java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.uc
.UniversalConnectionPoolException: Error during pool creation in Universal Conn
ction Pool Manager MBean: oracle.ucp.UniversalConnectionPoolException: Error du
ing pool creation in Universal Connection Pool Manager: oracle.ucp.UniversalCon
ectionPoolException: Universal Connection Pool already exists in the Universal
onnection Pool Manager. Universal Connection Pool cannot be added to the Univer
al Connection Pool Manager
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java
488)
at oracle.ucp.util.UCPErrorHandler.throwSQLException(UCPErrorHandler.ja
a:163)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java
651)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.
ava:890)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.
ava:857)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.
ava:851)
at oracle.iam.platform.auth.impl.DBStore.getConnection(DBStore.java:130
at oracle.iam.platform.auth.impl.DBStore.setSQLHint(DBStore.java:107)
at oracle.iam.platform.auth.impl.DBStore.<init>(DBStore.java:62)
at oracle.iam.platform.auth.impl.DBStore.getInstance(DBStore.java:83)
at oracle.iam.platform.auth.impl.Authenticator.<init>(Authenticator.jav
:87)
at oracle.iam.platform.auth.impl.Authenticator.getInstance(Authenticato
.java:71)
at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMA
thLoginModule.java:43)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(Lo
inModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(Lo
inModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:
86)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:
80)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(
AASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHand
er.invoke(Delegator.java:57)
at $Proxy25.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceIm
l.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceIm
l.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHand
er.invoke(Delegator.java:57)
at $Proxy43.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authen
icate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(Princi
alAuthenticator.java:348)
at weblogic.security.service.PrincipalAuthenticator.authenticate(Princi
alAuthenticator.java:355)
at weblogic.management.servlet.BootstrapServlet$1.run(BootstrapServlet.
ava:169)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticat
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java
146)
at weblogic.management.servlet.BootstrapServlet.processGet(BootstrapSer
let.java:119)
at weblogic.management.servlet.BootstrapServlet.doGet(BootstrapServlet.
ava:108)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.ru
(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecur
tyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.ja
a:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.ja
a:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
n.wrapRun(WebAppServletContext.java:3717)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
n.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticat
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java
120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebApp
ervletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServlet
ontext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.
ava:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.ucp.UniversalConnectionPoolException: Error during pool creat
on in Universal Connection Pool Manager MBean: oracle.ucp.UniversalConnectionPo
lException: Error during pool creation in Universal Connection Pool Manager: or
cle.ucp.UniversalConnectionPoolException: Universal Connection Pool already exi
ts in the Universal Connection Pool Manager. Universal Connection Pool cannot b
added to the Universal Connection Pool Manager
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(
CPErrorHandler.java:368)
at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolExceptio
(UCPErrorHandler.java:49)
at oracle.ucp.util.UCPErrorHandler.throwUniversalConnectionPoolExceptio
(UCPErrorHandler.java:80)
at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl.createConne
tionPool(UniversalConnectionPoolManagerMBeanImpl.java:316)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java
625)
... 61 more
<Aug 21, 2012 2:28:58 PM BST> <Error> <Configuration Management> <BEA-150035> <
n attempt was made to download the configuration for the server oim_server1 by
he user iamamin with an invalid password.>
thanks
sri485 -
XDK for PL/SQL install errors
Is this a problem ?
resolver :
Error while turning off verifier
ORA-29532: Java call terminated by uncaught Java exception:
java.security.AccessControlException: the Permis
sion (oracle.aurora.security.JServerPermission Verifier ) has
not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SYSTEM|PolicyTableProxy(SYSTEM))
I also get some of these ...
errors : oracle/xml/sql/dml/OracleXMLSave
ORA-29534: referenced object
SYSTEM.oracle/xml/sql/core/OracleXMLConvert could not be resolved
skipping : oracle/xml/sql/core/OracleXMLTime is already resolved
resolving: oracle/xml/sql/core/OracleXMLConvert
errors : oracle/xml/sql/core/OracleXMLConvert
ORA-29521: referenced name oracle/gss/util/XmlValidate could
not be found
resolving: oracle/xml/sql/OracleXMLSQLNoRowsException
errors : oracle/xml/sql/OracleXMLSQLNoRowsException
ORA-29534: referenced object
SYSTEM.oracle/xml/sql/OracleXMLSQLException could not be resolved
resolving: oracle/xml/sql/core/OracleXMLUtil
errors : oracle/xml/sql/core/OracleXMLUtil
ORA-29534: referenced object
SYSTEM.oracle/xml/sql/core/OracleXMLConvert could not be resolved
At the end, the final test shows ...
SQL> Rem Use these to test the results..
SQL> select dbms_xmlquery.getxml('select * from dual', 2) from
dual;
select dbms_xmlquery.getxml('select * from dual', 2) from dual
ERROR at line 1:
ORA-29541: class
SYSTEM.oracle/xml/sql/query/OracleXMLStaticQuery could not be
resolved
ORA-06512: at "SYSTEM.DBMS_XMLQUERY", line 20
ORA-06512: at "SYSTEM.DBMS_XMLQUERY", line 271
ORA-06512: at line 1
Can anyone please help. My load command was ...
./xdkload -u "system/manager" -s -noverify -dbver "817"
I'm trying to load version 9.0.2.0.0C into an 8.1.7 instance on
HP-UX 11. Before running the script, I had to set environment
variables INSTALL_ROOT, and LD_LIBRARY_PATH (we use
SHLIB_PATH). I haven't actually found any installation
instructions, so I've only got this far by poking around. Any
help is much appreciated.
SteveSounds like the same problem described in a number of posts
recently.
Re: Startup/Shutdown 9iAS on windows
http://forums.oracle.com/forums/message.jsp?id=550104
The problem is caused by unresolved classes in the XSU package
from the latest Beta, I hope someone from Oracle can take a look
at this.
Good luck!
Ola -
How to create a Web Application when SQL is running in SQL Authentication mode ?
Hi,
I a have the following config:
SQL server 2012 with mixed authentication, running in the LAN
IIS server with SharePoint 2013 SP1, running in a DMZ --> SharePoint contacts the SQL server with a SQL login (not a Windows login, the required port has been opened in the FW)
SharePoint is working fine but when I want to create a new Web Application, I get an error: "Could not connect to MySQLServer\MySQLInstance,MyPortnumber using integrated security: Cannot
connect to database master at SQL server. The database might not exist, or the current user does not have permission to connect to it."
I think, since I use SQL authentification, I have to use PowerShell. I found a script on the Internet but this script was not made to create a Web App which a SharePoint installed with SQL authentication.
Can you help to adapt the script ?
Thks
THE SCRIPT Documentation:
New-SPWebApplication -ApplicationPool <String> -Name <String> [-AdditionalClaimProvider <SPClaimProviderPipeBind[]>] [-AllowAnonymousAccess <SwitchParameter>] [-ApplicationPoolAccount <SPProcessAccountPipeBind>]
[-AssignmentCollection <SPAssignmentCollection>] [-AuthenticationMethod <String>] [-AuthenticationProvider <SPAuthenticationProviderPipeBind[]>] [-Confirm [<SwitchParameter>]] [-DatabaseCredentials <PSCredential>] [-DatabaseName
<String>] [-DatabaseServer <String>] [-HostHeader <String>] [-Path <String>] [-Port <UInt32>] [-SecureSocketsLayer <SwitchParameter>] [-ServiceApplicationProxyGroup <SPServiceApplicationProxyGroupPipeBind>] [-SignInRedirectProvider
<SPTrustedIdentityTokenIssuerPipeBind>] [-SignInRedirectURL <String>] [-Url <String>] [-WhatIf [<SwitchParameter> ]] [<CommonParameters>]
The Example:
$siteName = “PowerShell for SharePoint”
$port = 80
$hostHeader = “lab.ps4sp.com”
$url = “http://lab.ps4sp.com”
$appPoolName = “PS4SPAppPool”
$managedAccount = “PS4SPspservice”
$dbServer = “PS-SQL”
$dbName = “PS4SP_SP2010_LAB_ContentDB”
$allowAnonymous = $true
$authenticationMethod = “NTLM”
$ssl = $false
New-SPWebApplication -Name $siteName -Port $port -HostHeader $hostHeader -URL $url -ApplicationPool $appPoolName -ApplicationPoolAccount (Get-SPManagedAccount “$managedAccount”) -DatabaseName $dbName -DatabaseServer $dbServer -AllowAnonymousAccess: $allowAnonymous
-AuthenticationMethod $authenticationMethod -SecureSocketsLayer:$ssl
CharlesHi Scott,
Based on your aticle, I changed my script by adding the credential, but I still have an error.
Il also put the SQL specific port in the $dbServer variable.
Any idea ?
MY SCRIPT:
$siteName = "TEST Site"
$port = 80
$hostHeader = "sharepoint.test.be"
$url = "http://sharepoint.test.be"
$appPoolName = "TestAppPool"
$managedAccount = "DISNET\administrator"
$authenticationMethod = "NTLM"
$dbServer = "DSPORT-SQL02\DSPORTPRDEXT,50123"
$dbName = "WSS_TEST_Content"
$dbServer_secPassword = ConvertTo-SecureString "MySQLPassword" -AsPlaintext -Force
$dbServer_Creds = New-Object System.Management.Automation.PsCredential "DMZSharePointLoginSQL", $dbServer_secPassword
New-SPWebApplication -Name $siteName -Port $port -HostHeader $hostHeader -URL $url -ApplicationPool $appPoolName -ApplicationPoolAccount (Get-SPManagedAccount "$managedAccount") -AuthenticationMethod $authenticationMethod -DatabaseName
$dbName -DatabaseServer $dbServer -DatabaseCredentials $dbServer_Creds
Charles -
Authentication Error while Configue SOA in JDev 11g TP4
Hi everyone.
I'm trying to configure SOA suite 11g in my local system. I have done the schema creation and already created a App server connection in JDev->Tools-> Java EE Runtime Preferences.
When I start the configue SOA, it failes to start or stop the oc4j instance as below phase:
[echo] Changing oc4j ports with following values:
HTTP Port : 8988 -> 8888
RMI Port : 23891 -> 12401
RMI SSL Port: 24043 -> 24043
JMS Port : 9227 -> 12601
[echo] Create jms queues/topics from new oc4j jms template
[echo] Changing jms.xml to use port : 12601
[echo]
* Configuring SOA Infrastructure. This will take 5-10 minutes. *
* Summary of SOA configuration parameters: *
** Oracle Home = F:\jdeveloper11g\
** Oracle Instance = F:\jdevinstance\system11.1.1.0.22.49.49
** SOA Database = localhost:1521:XE
** SOA Database User = jdev_soainfra
** HTTP Port = 8888
** RMI Port = 12401
** JMS Port = 12601
** Component Type = o.j2ee
** Component Name = embedded-oc4j
** Configure OWSM = false
** Configure SOA Console = true
** Configure B2B UI = false
** Configure XEngine = false
[echo] ==Stopping oc4j standalone...
[exec] Result: 1
[echo] ==Waiting max 240 second(s) for shutdown of URL http://ESFANDIYAR:8888...
BUILD FAILED
F:\jdeveloper11g\install\bpel\build.xml:10: The following error occurred while executing this line:
F:\jdeveloper11g\install\bpel\soa-infra-config.xml:48: The following error occurred while executing this line:
F:\jdeveloper11g\install\bpel\soa-infra-config.xml:89: ***************************************************
* Configuring SOA Infrastructure has FAILED.
* If following log files exists, please check them for possible cause:
* F:\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\install\tmp\soa-infra-java.log
* F:\jdevinstance\system11.1.1.0.22.49.49\o.j2ee\embedded-oc4j\log\startsoa.log
Total time: 4 minutes 23 seconds
I checked the log file and it says it is encountered an authentication error. I'm wondering which user name and password it is referring and where shall I set the correct values. During the app server connection, I have entered the proper value for oc4jadmin/password.
Aug 30, 2008 11:37:00 PM oracle.j2ee.util.AnnotatedLogger logWithThrowable
WARNING: J2EE JNDI-00005
Authentication failed when trying to connect to the server. You need to provide a valid username and password.
Caused by:class javax.naming.AuthenticationException: Not authorized
oracle.oc4j.admin.deploy.cmdline.AdminCommandException:
Failed to connect to the server with deployment URI (deployer:oc4j:ESFANDIYAR:12401). Please refer to the exception trace from server above to identify the cause.
at oracle.oc4j.admin.deploy.cmdline.AdminCommandBase.execute(AdminCommandBase.java:54)
at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.executeCommand(Oc4jAdminCmdline.java:107)
at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.main(Oc4jAdminCmdline.java:71)
Thanks for any help.
EsfandHi Heidi,
I tried once again to install a fresh instance of Oracle soa suite 10.1.3.0 and upgraded it to 10.1.3.4 successfully. I did all the JDeveloper 11g installation and configure SOA process all successfully. I can create a connection to OC4J using 12401 RMI port successfully but none of my applications are deployed to server.
This message is repeatedly displaying in messages tab:
Exception returned by remote server: com.evermind.server.rmi.RMIConnectionException: Disconnected: oracle.oc4j.admin.management.shared.SharedModuleType. local class incompatible during deploy ...
The default OC4J RMI port is 23791 but in my installation it is set to 12401 when I checked the Runtime Port option of Oracle Application Server and the connection is fine with this port but applications can not be deployed with this configuration.
I can deploy applications on separate standalone OC4J instance successfully but not able to do it with my SOA application server.
Any comments will be appreciated.
Thanks again
Esfand
Edited by: user3788199 on Sep 8, 2008 6:50 AM -
I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 === -
Installer encountered an error: 0x80096002 on windows 8.1
hello,
I am trying to install Windows Installer 4.5 [windows6.0-KB942288-v2-x64] on windows 8.1 which is pre-requisite for installation of "Microsoft® SQL Server® 2008 Express with Advanced Services"
I am getting below error while installing Windows Installer 4.5
"Installer encountered an error: 0x80096002 on windows 8.1"
I tried to add the feature "Windows Identity Foundation 3.5" in order to resolve the issue
But it didn't help
PLs assist
Thanks
PadolHi Padol,
Since the issue regards Widows 8.1. I will help you move the question to the related forums at
http://social.technet.microsoft.com/Forums/en-US/home?forum=w8itprogeneral . It is appropriate and more experts will assist you.
Thanks for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Java.sql.SQLException: Error accessing jdbc driver
Hi,
We are using WebLogic Server 7.0 as Application Server.
We now create a connection pool named regPool and
a Tx datasource named regDS.
When we get the connection from the datasource, exception occurred.
java.sql.SQLException: Error accessing jdbc driver: driverURL =
jdbc:weblogic:pool:regPool, props = {enableTwoPhaseCommit=false,
jdbcTxDataSource=true, connectionPoolID=regPool}
at
weblogic.jdbc.jts.Driver.wrapAndThrowSQLException(Driver.java:323)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:377)
at weblogic.jdbc.jts.Driver.connect(Driver.java:129)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java
:265)
So I guess that why we can't use CMP for finding data. Here is the error when we call the finder.
javax.ejb.FinderException: Exception in findAllEmr while preparing or
executing statement: 'null'
java.sql.SQLException: Cannot obtain connection after 30 seconds. ,
Exception = Access not allowed
java.sql.SQLException: Cannot obtain connection after 30 seconds. ,
Exception = Access not allowed
at
weblogic.jdbc.jts.Connection.wrapAndThrowSQLException(Connection.java:694)
According to the exception message, it looks
like the connection fail between WLS and Oracle 9.2.
Here is a scenario I think you should need to know.
I change the table-name in the weblogic-cmp-rdbms-jar.xml
to a name that doesn't exist in the database.
Then, re-package the EJB, copy it to server and restart the server.
A exception occurred that says the table doesn't exist.
So, in this case, it looks like the datasource works and
connection is fine.
Any recommendation will be appreciated.
Jimmy ChangHi!
I am a default user to the databse server. I connect to the database with '\' as the username and blank passoword(I mean with Network authentication may be).When I am trying to create connection using
con = DriverManager.getConnection("jdbc:oracle:thin:@DRACINAL2:BSAJ", "/","" )
it gives me followint error
ava.sql.SQLException: Null user or password not supported in THIN driver
void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)
void oracle.jdbc.dbaccess.DBError.throwSqlException(int, java.lang.Object)
void oracle.jdbc.dbaccess.DBError.check_error(int)
oracle.jdbc.dbaccess.DBConversion oracle.jdbc.ttc7.TTC7Protocol.logon(java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
void oracle.jdbc.driver.OracleConnection.<init>(oracle.jdbc.dbaccess.DBAccess, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
java.sql.Connection oracle.jdbc.driver.OracleDriver.getConnectionInstance(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
java.sql.Connection oracle.jdbc.driver.OracleDriver.connect(java.lang.String, java.util.Properties)
java.sql.Connection java.sql.DriverManager.getConnection(java.lang.String, java.util.Properties, java.lang.ClassLoader)
java.sql.Connection java.sql.DriverManager.getConnection(java.lang.String, java.lang.String, java.lang.String)
void textPack.GenTextFile.main(java.lang.String[])
How should I go about it?
Thanks for your help.
-Sreekanth Varidhireddy -
BPM Integration with SQL Authenticator Provider in WebLogic
Hi Gurus,
Related to the explanation from this blog : http://orasoa.blogspot.com/2010/06/sqlauthenticator-and-human-worklist.html
I have followed this review, I can see all user and groups from sql authenticator provider.
And also I can assign bpm application roles to users from sql authenticator provider.
But when I try to assign bpm application roles to groups from sql authenticator provider, the bpm application is not show from bpm workspace.
Is there any clue to solve this problem?
Cheers,
Agus WHi All,
Found the reason for the exception. I was implementing the generated the CustomAuthenticatorImpl class (generated through WebLogic MBeanMaker utility) as the provider class by implementing the AuthenticationProvider interface. Keeping them separate solved the issue.
Able to create the jar without any issues and also no error or exception after restart.
Thanks. -
Oracle bi authentication error
Hi,
I am getting authentication error when I tried to login in to oracle bi publisher when I tried to save an i bot again I get authentication error. Is there anyway for me to override authentication or what can caıuse something like this. any help would be appreciatedHi,
You are probably encountering 2 different issues.
For BI Publisher:
With a default OBI installation the BI Publisher security model is set to "Oracle BI Server". So to log into BI Publisher the BI Server has to be up. It can also be the case that you created a new repository. Then you probably have not created and granted the right roles to the OBI user (i.e. XMLP_ADMIN etc. see the default paint.rpd or samplesales.rpd for those roles).
You can turn off the OBI authentication. For that you have to go the Admin tab, security configuration and use another security model (i.e. BI Publisher security).
For the iBot:
Did you follow all configuration steps as stated in the configuration guide? One step is to add the user, which you configured with the job manager, to the credential store. I think you missed that step.
Regards -
"Authentication error", making disk image
I'm trying to make a disk image of my OS X boot disk, as an emergency backup. I'm booting from the Installation CD that came with my Mac Pro, and using Disk Utility. I select my boot drive, click New Image, and tell it to save to an external firewire drive, compressed and encrypted. It starts and quickly errors out, with "Authentication error." What does this mean?
I've used 250 GB of the 500 GB on my boot drive, and my external drive is 120 GB. I'd rather tell it to skip some files to save space, but it doesn't give me the option to do that. Will "compress" get it to be small enough? Is this why I'm getting an error? I've repaired permissions before booting from the CD.I don't know about the authentication error; however, to make a disk image of 250 GB source drive to a 120 GB target is an exercise in futility. There's not enough room. 250 GB? What are storing? A complete music store, the movies of Hollywood, or the pictures in an art gallery?
If you want an emergency backup of your 500 GB HD, then you'll need an external at least as big. BTW, making disk images for this purpose is fraught with danger since you can't ensure that it's good until you restore it to a bootable HD. I strongly recommend something like Carbon Copy Cloner, SuperDuper!, etc. instead. BTW, you can just drag & drop any data files from one HD to another. There's no need to put them in a disk image and certainly no need to encrypt things. If you decide to go the bootable backup route, move the data files to root-level and don't back those up. That should make your emergency backup a lot smaller. -
Authentication error while logging in through WEBLOGIC user
Hi All
I have installed OBIEE 11.1.1.5 on my system having Windows 7 (32bit). The installation went thru without any errors.
I am able to login to Enterprise manager and Console with user weblogic/oracle123 but am not able to login to Analytics. its giving Authentication error.
Can somebody lease help.
Thanks
Regards
AnkitWhenever you want to login to OBIEE 11g - First Start--Go to all programs --Oracle Business Intelligence- Stop BI services. Stop the BI services first.
You may try this -->
Go to Run, Type odbccp32.cpl
go to System DSN - Select Coreapplication.....
Configure ->Say OK-> Uncheck Clustered DSN option. -> OK.
Start the OBI services.
Note : Before starting the OBIEE 11g services - first of all STOP the bi services.
After you press start BI service - wait for 10 min to finish the process - a blank page will open by itself - wait again for 2 minutes and then just refresh the page -
Thanks.
Maybe you are looking for
-
Changing Stage size at runtime
I have been poking around and not finding any info on this. What I want to do is change the height of the STAGE (not a MovieClip) based on which view I'm showing the customer at a particular time. For instance... I may have a thumbnail and a detail v
-
First-chance exception on load and calls
When loading our application we see quite a few "first chance exception" error messages being reported from the berkeley db xml library. The same first chance exceptions are thrown on each call to the berkeley db xml library - about 30 or so result f
-
Xl reporter for 2007 authorization error
Hi All, we are working on SAP Business One 2007 B (8.60.034) SP: 00 PL: 07. the XL reporter comes with the release of the core product. I was facing the error of 'User authentication failed' and came to know that it was because the system was upgra
-
Images to pdf gc overhead exceeded
I have an application that collects uploaded images. This part works fine. I need to also be able to take all those images and send them to a pdf file but the page does not load and gives a GC java overhead limit exceeded, after several minutes. What
-
Adobe Creative Suite 4 in Japan?
Hi!! Actually living in Japan I'd like to buy the last "Adobe Creative Suite 4". When I go on the adobe.com website and select the product for buying it, it automaticly send me bck on the Japanese Store and replace the version 4.0 with the 3.3 versio