Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards
Script returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.
Similar Messages
-
Connection for Source DataConnection failed because the enviroment is not trusted
Keep getting the error "Connection for Source DataConnection failed because the enviroment is not trusted. I have searched the internet and have not found a solution to this problem. Anyone know a way around this? Trying to connect a live cycle form and an Access database....I am at the end of my rope here...
TIA@There are browser settings that control whether you allow getting data from other sources (than where the current page is loaded). In preview you are loading the PDF in an browser ActiveX control so that is why this is coming up. You may also have to add the other server name to your trusted site list in the browser.
-
Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
GhosalHello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal -
Connection for srouce dataconnection failed because the environment is not trusted
HI all I keep gettng this message when I
preview the page
i get this message that sayd he the connection for the source dataconnection failed because the environment is not trusted
can anyone help??Here is a blog entry that discusses how to deal with getting specific records etc....
http://forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
Note at the bottom of the blog he mentions new security rules in version 8. Make sure you follow that link and look at the section on cloning ....you will need to do that in your script.
Once you are on that blog you can search for your "Environment not Trusted" error. There were a couple of hits in the Q/A sections at the bottom of the blog. There is no definitive answer but there was a couple of suggestion there.
Also if you go a google serach on "Environment not Trusted" there are numerous hits on different discussion forums. You may get your answer from one of those. If you find the answer can you post it back here please?
paul -
Free CS6 upgrade for student master collection at $599?
Our school sells the Master Collection for $599 (currently CS5.5). I would like to buy it and the school staff assures me that I'd get the free upgrade to CS6 if I bought it now. However, that price (which they've had for awhile now, and is not listed as a special or sale price for them) seems to be less than the normal educational price for the Master Collection. They say the price will go up when they have CS6 to sell.
The adobe upgrade policy says that the following are invalid: "Receipts showing a product price that is discounted more than 25% off the Adobe retail or educational price (some product exceptions apply)"
What is the regular educational price for the CS5.5 Master Collection and does a purchase now at my school qualify for the free upgrade to CS6 Master Collection when it is released? The price listed on the adobe site for CS6 Master Collection is $799, which would make our school's price 25.03% off that.
I want to buy now but want to be sure to qualify for the discount.
2nd question: if this is eligible for the upgrade, can I buy the Mac version and then switch to the PC version later? Our school is out of stock on the PC collection and won't get any in until May 4th. (which is cutting it very close to cutoff date for eligibility on upgrades).I'm also in the same situation, kind of. I already got my cs5.5 master collection through my school on the 26th. But every other post I've read about the upgrade only says Creative Suite cs5.5 will get upgrade. So I'm trying to find out if people who got the master collection (which comes with the Creative Suites) are eligible for upgrades complimentary? Any help answers would be appreciated. Thanks.
Alonzo G. -
G580 Upgrade to Windows 10 failed in the SAFE_OS phase with an error during BOOT operation
0xC1900101-0x20017 I could not successfully upgrade from windows update, nor from the straight download site. The installation failed in the SAFE_OS phase with an error during BOOT operation. I see w10 bios updates for other models. Has anyone been successful in upgrading to W10 from W8?
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:21, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >:uspend(1066): Result = 0xC18001042015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteInstallMode(656): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::Execute(222): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupHost::Execute(370): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216
2015-07-31 21:36:36, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:36:40, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:37:02, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:03, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:11, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:15, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:18, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] -
Visio Database Wizard fails - ODBC connection to MS SQL
When I try to create an ODBC connection in Visio's 2010's Database wizard I get the error: "Cannot set the database context information. Additional error information:ODBC Error: s1009. Database cxweba does not exist."
Note that the database name is cxwebapp_bkk. I get the same error if I connect to any database on that server, and it always truncates the name in the error message (if that is a hint to the error).
Using Visio 2013, after connecting to the database: when I select the database object I get the error message: "The selected table has only one field or contains no definition information. The Database Wizard requires a minimum of one key field
and one additional data field."
I have this problem using both SQL Server driver (6.02.9200.116384 and SQL Server Native Client 11.0 (2011.1102.2100.60).
I do not have this problem connecting to a MYSQL database with either version of Visio, nor do I have this problem when I link link to the same SQL database in a drawing and link shapes in that drawing using the "Link Data to Shapes" under the
Data tab.Hello,
What's the version of the SQL Server instance you connect to? It seems that the Database Wizard in Visio 2010 not work well with the Microsoft SQL Server ODBC driver. Did you try to use the Generic OLEDB Provider for SQL Server?
Since the issue is more related to office Visio, please post the question in the following forum. More experts there will assist you:
Visio General Questions and Answers for IT Professionals
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Hi
I installed a upgrade of itunes on my windows computer
It came up with error message of msvcr80.dll I went to repair and to reinstall itunes but this didnt fix it
Please help meUninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Matlab script in LV6.1 built app fails after upgrade to Matlab 7 (R14).
The LV6.1 built app, running under LV6.1 runtime, successfully invokes Matlab script server, R13. After Matlab upgrade to R14, the script server fails to activate. Use of the newest matscript.dll download is not a satisfactory solution, since it fails on systems still running Matlab R13. Is there a universal fix for this problem? I have already checked the related postings.
voraciousniuser wrote:
> Hey Joxyl! I think the reason why we are not able to do this on R14 is
> because Mathworks has modified its ActiveX interface -- I dont know if
> NI has a fix for it yet, but probably the way to go would be to use
> the previous release. I hope NI brings out a patch for it soon. Hope
> this helps -- Thanks VNIU
This fix has been released just recently and announced in several
threads on this forum yesterday.
href="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000F4E80000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=matlab+script+7.0&USEARCHCONTEXT_QUESTION_S=0">this
thread for more information.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Database login failed after upgrade to VS 2008
I am having trouble with one of my reports after upgrading a project from VS 2005 to VS 2008. All reports work fine except for one. The one that doesn't work has a subreport and I am assuming that the subreport is the cause of the problem.
My configuration is - using Crystal Reports Professional XI (11.5.8.826)
The web server has Crystal reports server install, but I know very little about it. When I installed it, I had so much trouble configuring it, I don't know what it is that I finally got to work on the server. I think I ended up installing one of the runtimes a while back to get it working.
When I upgraded my project, I simply opened the project in VS 2008, set the target as .net 3.5, built it and everything works except for this one report.
Can someone please tell me what I need to install, or change on the server to make this work properly?
Is there a way that I can determine how my reports are being served up? As I said, I'm not very familiar with the CR server and I had a lot of trouble with it when I did the initial configuration.
ThanksThanks for the reply. I got the upgrade complete, but I am still getting the database logon error. I am using Visual Studio 2008, C#, Crystal Reports 2008 (dll version 12.0.2), Sql Server 2000. All of my reports work fine except for this one. The difference in this one is that it has a subreport. The report and subreport are using stored procedures. I have tried using the sa account to login to them. They login to two different databases on the same database server.
Here is the code that I am using to login to the database.
public enum ReportDatabase{MGA, Brokers, Intranet, TimeClock };
public void SetDBLogonForTables(Tables tables, ReportDatabase database)
string _userid = string.Empty;
string _password = string.Empty;
switch (database)
case ReportDatabase.MGA:
_userid = "abc";
_password = "123";
break;
case ReportDatabase.Brokers:
_userid = "abc";
_password = "123";
break;
case ReportDatabase.Intranet:
_userid = "abc";
_password = "123";
break;
case ReportDatabase.TimeClock:
_userid = "abc";
_password = "123";
break;
ConnectionInfo _connection = new ConnectionInfo();
_connection.ServerName = "123.123.123.212";
_connection.DatabaseName = database.ToString();
_connection.UserID = _userid;
_connection.Password = _password;
foreach (Table table in tables)
TableLogOnInfo _logoninfo = table.LogOnInfo;
_logoninfo.ConnectionInfo = _connection;
table.ApplyLogOnInfo(_logoninfo); -
Polling for database updates fails to update sequence file/table
I have a small system to poll for changes to a database table of student details. It consists of:
Database adapter, which polls the database for changes, retreives a changed row, and passes the generated XML to -
"receive" router service, which simply passes the retrieved database XML data to -
"execute" router service, which transforms the XML and passes the new message to -
File Adapter, which writes the transformed XML to a file.
The problem is that the database polling is not updating the sequence recorder - I have tried using a sequence file which stores the personnumber, a sequence table which stores the personnumber and a sequence table which stores the last-updated timestamp. In all cases the database adapter successfully reads the sequence file/table and retreives the correct row, based on the sequence value ( I have tested this by manually changing the sequence value), the data is transformed and a correct xml file is created, but the system then fails to update the sequence file/table so that when the next polling time comes around the very same database row is extracted again and again and again.
In the ESB control panel I have one error: "Response payload for operation "receive" is invalid!"
The Trace is:
oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: Response payload for operation "receive" is invalid! at oracle.tip.esb.server.service.EsbRouterSubscription.processEventResponse(Unknown Source) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(Unknown Source) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(Unknown Source) at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(Unknown Source) at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:281) at oracle.tip.adapter.db.InboundWork.onMessageImpl(InboundWork.java:1381) at oracle.tip.adapter.db.InboundWork.onMessage(InboundWork.java:1291) at oracle.tip.adapter.db.InboundWork.transactionalUnit(InboundWork.java:1262) at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:501) at oracle.tip.adapter.db.InboundWork.run(InboundWork.java:401) at oracle.tip.adapter.db.inbound.InboundWorkWrapper.run(InboundWorkWrapper.java:43) at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242) at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215) at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819) at java.lang.Thread.run(Thread.java:595)
The payload is:
<PersonCollection xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/ISSSimIN">
<Person>
<name>Bob</name>
<surname>Stupid</surname>
<istatus>2</istatus>
<active>Active</active>
<personnumber>3001</personnumber>
<role>Staff</role>
<organization>TEX</organization>
<updateTimestamp>2007-11-29T14:06:55.000+00:00</updateTimestamp>
</Person>
</PersonCollection>
The payload above is the XML output from the Database adapter, the xsd for which was autogenerated by JDeveloper, so I don't understand how it can be invalid.
I have only been working with ESB for 3 days, but half of that time has now been spent stuck on this issue. Anyone got any ideas??
RichardYou need to be careful. Submit and committing to the database are two different things.
Submit on a page (and autoSubmit the property) are only posting the changes you typed into the field, back down to the application server. NOTHING is happening with the database at this point. So the applications's internal "cache" of records (using something like ADF BC) is holding the changes but the database doesn't know anything. So if you quit now, no changes will go to the database.
These changes onlyget submitted down to the app server when you do some sort of action like press a button. Simply navigating fields will be doing nothing back to the app server. If you add autoSubmit then you will automatically submit the changes on that field down to the app server when you leave the field (but again, this is not touching the database)
You have to explicitly add a COMMIT operation to save those changes to the database.
Maybe if you try in a simple EMP example and send us your findings we can help direct you further.
Regards
Grant -
Solved, you can see the details down in this post https://bbs.archlinux.org/viewtopic.php … 6#p1481476. Basically I rebooted.
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
As the subject states, when running ./build.sh there is a mount: work/mnt/airootfs: mount failed: Unknown error -1
looking through the script I think the command that is being ran is
mount /home/pingbuild/archlive/baseline/work/airootfs.img /home/pingbuild/archlive/baseline/work/mnt/airootfs
The mnt/airootfs directory does exist. I guess normally the directory is removed, but I am assuming the scripts stop with the error. Anyway if I run the command by hand I get the same error.
Is the airootfs.img not being created correctly?
Here is a snapshot of the std out. I could not get std err to go to curl/spurgen, so the actual error did not upload. I will paste by hand so you can see where it would have been.
[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO: Command: prepare
[mkarchiso] INFO: Architecture: x86_64
[mkarchiso] INFO: Working directory: work
[mkarchiso] INFO: Installation directory: arch
[mkarchiso] INFO: Cleaning up what we can on airootfs...
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Creating ext4 image of 32GiB...
Discarding device blocks: 4096/8388608 done
Creating filesystem with 8388608 4k blocks and 2097152 inodes
Filesystem UUID: df2e27ca-bdaf-4923-9568-f066c3f57b6c
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624
Allocating group tables: 0/256 done
Writing inode tables: 0/256 done
Writing superblocks and filesystem accounting information: 0/256 done
[mkarchiso] INFO: Done!
[mkarchiso] INFO: Mounting 'work/airootfs.img' on 'work/mnt/airootfs'
mount: work/mnt/airootfs: mount failed: Unknown error -1
[mkarchiso] INFO: Unmounting 'work/mnt/airootfs'
umount: work/mnt/airootfs: not mounted
Last edited by penright14 (2014-12-04 13:49:27)djgera wrote:See https://bbs.archlinux.org/viewtopic.php?id=190477
Thanks, after looking at the post, I did not see that in the wiki.
My systemd is 217-8
I may have misunderstood what the post was accomplishing, but I run 'modprobe loop', then tried my mount same error. If I may ask a dumb question, once 'modprobe loop' has ran without any errors shown, will the loop be added until the next boot?
Here is my lsmod
Module Size Used by
mousedev 17272 0
ppdev 16782 0
coretemp 12820 0
hwmon 12930 1 coretemp
vmw_balloon 12658 0
crc32c_intel 21809 0
evdev 21544 1
mac_hid 12633 0
psmouse 107214 0
serio_raw 12849 0
pcspkr 12595 0
e1000 130280 0
battery 17452 0
vmwgfx 174313 1
ttm 73743 1 vmwgfx
drm_kms_helper 80934 1 vmwgfx
drm 259106 4 ttm,drm_kms_helper,vmwgfx
i2c_piix4 20857 0
i2c_core 50152 3 drm,i2c_piix4,drm_kms_helper
parport_pc 26351 0
parport 35749 2 ppdev,parport_pc
irda 113859 0
crc_ccitt 12347 1 irda
vmw_vmci 55463 0
intel_agp 17432 1
intel_gtt 17848 1 intel_agp
shpchp 35210 0
processor 27777 0
ac 12715 0
button 12953 0
sch_fq_codel 17343 2
ext4 501833 2
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sr_mod 21903 0
cdrom 47479 1 sr_mod
ata_generic 12490 0
pata_acpi 12771 0
sd_mod 44398 3
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 1 crc_t10dif
ata_piix 33592 0
mptspi 21940 2
scsi_transport_spi 27754 1 mptspi
mptscsih 26657 1 mptspi
mptbase 72945 2 mptspi,mptscsih
libata 181518 3 pata_acpi,ata_generic,ata_piix
scsi_mod 147543 6 scsi_transport_spi,libata,mptspi,sd_mod,sr_mod,mptscsih
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
floppy 69118 0
i8042 18002 1 libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
Also
djgera wrote:
Please check if loop kernel module is loaded. Also, check for any related kernel log messages.
truncate -s 1M coco.img
mkfs.vfat coco.img
mount coco.img /mnt
does this works?
Gives me the same results. Also I tried overwriting the vfat with etx4, same thing. This confused me. I know I have made rootfs before.
Let me step out and set the stage a bit.
This is a question I posted on stackoverflow http://stackoverflow.com/questions/2693 … re-adj-lib One suggestion was archiso. So I started with baseline and was trying to build my 'hello world' iso. Once that is done I will then try port the P.I.N.G scripts to that ISO. Maybe event create it as a package that archiso will then just merged in. Once I get to that point building new iso should be a breeze. Actually, I use the tool as a pxe boot, but until I get the 'hello world' iso working, I can't trust the boot. So I have a script I wrote to build my rootfs once I get the process working and I know it ran once. So I rebooted and all is good.
FYI here is my script.
#!/bin/bash
PINGHOME="/home/Ping"
AIROOTFS="/home/pingbuild/archlive/baseline/work/airootfs"
PINGROOTFS="${PINGHOME}/rootfs"
if [ "$1" == "init" ]
then
rm -r ${PINGROOTFS}
cp -av "${AIROOTFS}/" "${PINGROOTFS}/"
fi
rm -r ${PINGROOTFS}/Braums
cp -av ${PINGHOME}/Braums/ ${PINGROOTFS}/Braums/
dd if=/dev/zero of=initrd bs=1M count=60
mkfs -t ext4 -F initrd
mount -o loop initrd /mnt/PingFS
#rsync -rpltDzv --delete --progress ${PINGROOTFS}/ /mnt/PingFS/
umount /mnt/PingFS
Stepping back in..... When I ran my script I was getting the same errors. Ok, this can't be so I rebooted, ran my script, and it worked. I ran the lsmod and the loop was there.
So tried './build.sh' and it is coping work/airootfs/ to work/mnt/airrootfs.
Not sure why or how it got there since my system is rather new (mid nov 2014) but after a reboot, it does look like systemd 217-8 will insert the loop without forcing a modprobe. That is probably why I did not see it in the wiki.
So back to draining the swamp. If the ISO works and I sure it will then I am back to trying to get pxe boot to work, then integrating the P.I.N.G scripts into the new rootfs. But that maybe another post. :-) -
SPDD Adjustment for Database indexes during the Upgrade
Hi Experts,
I am currently upgrading our Existing ERP 6.0 SP13 to ERP 6.0 ehp 4.0 with SP 03 and NW 701. I am kind of lost on the SPDD modifications Adjustment. We have 4 objects are in the SPDD modifications under "Without Medications Assistant. All of them are related to Database tables, where our developers created indexes for SAP Delivered Database table object. All of them are YELLOW. If select one of them and go to "Adopt Medications", it brings a Dialog window with
"Database table BKPF. Adjust all objects selected subtree?" --> I clicked on YES
I get the following
Database Table BKPF Table Index Z01
background
The object has been modified without using the Modification Assistant.
Therefore no support is available from the system for transferring your
modifications.
Procedure
*[Subtree icon]* Before you adjust your modifications, you can select multiple
objects or a subtree.
*[Check Mark icon]* If you have selected multiple objects, you can skip the processing
of this object.
You can use the "Processor/Status" function to add other processors.
If you have modified an object where multiple versions are possible,
then the last version that contains changes has been stored in "version
management".
*[Pencil icon]* Otherwise, use your own notations to transfer the modifications to
the new version of the object.
*[Check Mark icon]* After an object is inserted in a transportable change request, the
red traffic light icon is replaced by the green checkmark in the tree.
If you do not want any modifications to be adopted, choose the "Reset
to Original" function.
I clicked on the Pencil icon [PENCIL CHANGE] -> it takes me to that object where I DO NOT have any options to adopt the objects....
I am bit of confused, I should get an option to adopt this object, so I can keep the current version and SAP doesnt over write it after upgrade and delete my indexes.
Please tell me what I am doing wrong here.
Thanks in Adamancy
Kumar
Edited by: Kumar Subramaniam on Jun 9, 2009 7:43 PMOSS note 1658376 (Table index displayed in transaction SPDD after deletion) is relevant for this and check the below link as well.
http://www.sapdiary.com/index.php?option=com_content&view=article&id=22738:sap-network-blog-extension-index-in-spdd&catid=81:data-services&Itemid=81
Regards,
Gokul -
SQL Database creation failed in resource group Default-SQL-NorthEurope
Hi
I am getting the following error, when I try to create a database in Azure(https://portal.azure.com/)
OperationName: CreateDatabase
Status: Failed
EventTimestamp: Wed Dec 03 2014 16:44:53 GMT+0100
ResourceUri: /subscriptions/[SubscriptionId]/resourcegroups/Default-SQL-NorthEurope/providers/Microsoft.Sql/servers/img0xvixih/databases/[DatabaseName]
SubscriptionId: XX
EventSubmissionTimestamp: Wed Dec 03 2014 16:51:00 GMT+0100
OperationId: 3972a8b9-046e-4a3d-ae78-6bed77ad2362
SubStatus: N/A
CorrelationId: 3972a8b9-046e-4a3d-ae78-6bed77ad2362
Description: Failed to create database [DatabaseName], SqlErrorCode: 40827 by: [email protected]
Level: Informational
ResourceGroup: Default-SQL-NorthEurope
ResourceProvider: Microsoft.Sql
EventSource: Microsoft.Sql
Properties: ServerName:img0xvixih
DatabaseName:[DatabaseName]
ErrorCode:40827
ClientIP:157.**.***.250
Description:Failed to create database [DatabaseName], SqlErrorCode: 40827
Note :
I have a: pay as you go plan
Thanks in advance.Hi Girish
I am getting the same error:
OperationName: CreateDatabase
Status: Failed
EventTimestamp: 2014-12-03T15:44:53.655Z
ResourceUri: /subscriptions/[SubscriptionId]/resourcegroups/Default-SQL-NorthEurope/providers/Microsoft.Sql/servers/img0xvixih/databases/[DatabaseName]
SubscriptionId: XX
EventSubmissionTimestamp: 2014-12-03T15:51:00.486Z
OperationId: 3972a8b9-046e-4a3d-ae78-6bed77ad2362
SubStatus: N/A
CorrelationId: 3972a8b9-046e-4a3d-ae78-6bed77ad2362
Description: Failed to create database [DatabaseName], SqlErrorCode: 40827 by: [email protected]
Level: Informational
ResourceGroup: Default-SQL-NorthEurope
ResourceProvider: Microsoft.Sql
EventSource: Microsoft.Sql
Properties: ServerName:img0xvixih
DatabaseName:[DatabaseName]
ErrorCode:40827
ClientIP: 157.**.***.250
Description: Failed to create database [DatabaseName], SqlErrorCode: 40827
hmmm, maby next stop is amazon(aws)! -
IPhone 3Gs - upgrade to OS4.0 failed and I can't restore anymore (error 36)
I tried to upgrade my iPhone 3gs to the new OS4 and I received an error message (unknown error (36)) during the process. I can't turn the phone on anymore and it is not possible to restore it using iTunes 9.2.
I tried to follow the steps described in the topic http://discussions.apple.com/thread.jspa?threadID=2469544&start=0&tstart=30
however it hasn't worked. I've downloaded the OS4 file about 10 times, always deleting the previous one located in the DOCUMENTS & SETTINGS folder. I've also tried to install the 3.1.3 firmware but iTunes didn't accept it (error 3194), showing me another error message...
Can anyone help me?
Thanks!Thanks Tommy, but I had already tried the "Notes" setting on and off and neither seemed to make any difference.
I just tried to email a Voice Memo, another feature I use regularly, and it had the same problems as before however this time it wouldn't even send a message to the Outbox.
I decided to try a few differnent mail accounts I have, POP3, IMAP and HOTMAIL to see if any of them would work. Interestingly, when I created a new POP3 account and clicked "Save", during the verification process for this new POP3 account it produced an error with the IMAP account!
I thought I should just delete the newly created POP3 account as well as my normal IMAP account (this one noted in the first post above) and then I'd recreate the IMAP account. As I deleted the POP3 account, I heard the sound that is played when an email is sent, the phone then automatically switched to the Mail application and showed the Outbox with all of my previous attempts to send Notes and Voice Memos from the last couple of days. Which all sent successfully.
So even though I was able to send and receive emails during this time, it would seem the OS4.0 upgrade butchered something in the IMAP account settings, which caused both the Notes and Voice Memos to have issues.
It all seems to be working OK now, I just thought I would share this solution/work-around in case anyone else is having the same problems as I did.
Maybe you are looking for
-
MY APPLE TV ASK TO DOWNLOAD AN UPDATE BUT WHEN IT FINISHED IT ASKED ME FOR MY WI-FI PASSWORD AND I DONT HAVE A WI-FI PASSWORD WHAT CAN I DO?
-
Trying to find a specific SQL statement to determine its cost
If an sql statement is executed will it ALWAYS show up in the awrrpt report? (10g) I am a developer DBA and was handed an SQL statement by the production DBA as being a problem during a specific timeframe within the past hour. That statement does not
-
PDF Desktop Icons - Content Icon Vs. Standard PDF Icon
Hi... I tried getting an answer to this in the READER forum, but to no avail, so someone suggested I try here... On my desktop, for any PDF file, currently all icons are the standard Adobe/PDF style. From time to time, and I don't know what causes t
-
Hi ,Maximum line size in the report
What is the maximum line size inthe report.Some are saying 1023.Some are saying 255 characters.I am full confusing this concept. And if the line size mentiones in less than the length of the data in the write statement ,what happened? Sometimes it is
-
Tecra M2 - Card reader doesn't work on Windows 7
Hi All I've installed Win 7 on my TECRA M2 and everything worked fine at once ... except for one thing! The SD card reader is not recognized (worked well with XP). Any hint please ? Thanks in advance JP