Tn3270 fails on access denied

After configuring the tn3270 Provider I downloaded from Protal Studio, I attempt to connect to the mainframe and it hangs with a grey screen.
I checked the trace file and here are the firs few messages (where nn.nn.nn.nn is the IP address I configured and YYY is the port I configured)
Inside Tn3270Applet.init()
Inside Tn3270Applet.start()
Inside Tn3270Bean()
nn.nn.nn.nn
Inside Tn3270Bean.connect()
Inside Tn3270Main()
Inside Tn3270TcpConnector()
Inside Tn3270Display()
Inside Tn3270Cursor()
Inside Tn3270Stream()
Inside AID
Inside Tn3270Main.openConnection()
Inside Tn3270TcpConnector.openConnection()
Inside Tn3270TcpConnector.openConnection()
access denied (java.net.SocketPermission nn.nn.nn.nnn:yy connect,resolve)
Inside Tn3270Bean.startThread()
Inside Tn3270Applet.renderData()
Inside Tn3270Bean.run()
Inside Tn3270Main.readInputStream()
Inside Tn3270TcpConnector.read()
null
Inside Tn3270Main.processInputStream()
Inside Tn3270TcpConnector.process()
Inside Tn3270Main.readInputStream()
Inside Tn3270TcpConnector.read()
null
Inside Tn3270Main.processInputStream()
Inside Tn3270TcpConnector.process()
Inside Tn3270Main.readInputStream()
Inside Tn3270TcpConnector.read()
null
Inside Tn3270Main.processInputStream()
Inside Tn3270TcpConnector.process()
It stays in this loop forever. I tried this in Internet Explorer(v#6.0) patched up to SP1 and Netscape (v# 7.1) and in both cases it fails identically. I even downloaded the late4s JRE from Sun - but to no avail.
Any help would be appreciated.
Thanx, John Watson

I'm running command: prnmngr.vbs -a -p "blah" -m "blah" -r "blah"
I have made some progress on this, disabling UAC resolves the issue but it is not a suitable solution. Any ideas?
The code runs fine on Windows 7 & 8 with UAC enabled.
Yes - do not use legacy methods on WS2008R2. You should be using Group Policy to connect user printers.
Why do these printers have to be constantly reconnected. Are they on wheels or have wings. Printers get connected once and are published in AD> Users can choose the printer they need from a list.
"Prnmngr" is a leftover from NT 4 and is maintained for use in stand alone systems.
PrintManager does all things and more. It has been the replacement since WS2003R2. Note that is WS2003.
http://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx
¯\_(ツ)_/¯

Similar Messages

PCROleObj- PutRefFormattedPicture() fails with ACCESS DENIED

I am trying to change the bitmap of an OLE object in a CR9 report. Having successfully located the object and put it in pCROleObj, I then run the code below and it fails with access denied. Why?
IPictureDispPtr pPicDisp;
PICTDESC pd;
pd.cbSizeofstruct = sizeof(pd);
pd.picType = PICTYPE_BITMAP;
pd.bmp.hbitmap =
LoadBitmap(theApp.m_hInstance,MAKEINTRESOURCE(IDB_LOGGA));
OleCreatePictureIndirect(&pd,IID_IPictureDisp,TRUE,(LPVOID *)&pPicDisp);
pCROleObj->PutRefFormattedPicture(pPicDisp);

Same reply applies to here as in this thread:
AddPictureObject() returns 0x80047cbd
Ludek

Get-VHD failing with access denied when querying remote VHDs on SMB 3.0 shares

I'm out of ideas on this one. I'm attempting to do a Get-VHD to retrieve VHD info for some Guests that are using SMB 3.0 shares to remotely store their VHDs and I cannot remotely run the powershell command at all without getting Error: 'General Access
denied error' (0x80070005)'. Command running locally on the machine hosting the guest works fine.
Here is the Hyper-V Setup - Host is Server 2012 datacenter, guests are 2012 or 2008 R2 boxes. Storage server is Server 2012, domain is 2008 R2 functionality level if it matters, powershell version 3.0
Host1 --> Guest(1) --> {LAN}--> StorageServer --> Share --> VHD
Make sense? pretty easy, normal setup. The Host has full access NTFS rights on the share and all files, including the VHDs. As does my AD account. All on the same domain. If I RDP into Host1 I can retrieve everything just fine. However, the following methods
will not work to retrieve VHD info of any Guest running on their VHDs off the share (get-vhd works if Guests have their VHDs on locally attached storage).
1.) Enter-PsSession Host1 and then attempt get-vhd
2.) Invoke-Command
3.) import module/hyper-v management tools on client then running get-vhd
4.) Executing GetVirtualHardDiskInfo method in WMI (http://msdn.microsoft.com/en-us/library/cc136797%28VS.85%29.aspx) to retrieve the job which results in same error message.
5.) Even attempting test-path $pathToVHD on the host will result in Access Denied error.
If I check the storage server hosting the VHDs I see some normal access requests come across on my Domain account followed a few seconds later by a null sid/anonymous requests which of course are denied. I have no idea why on earth they are coming across
as null SIDs/anonymous requests but this seems to be the root of the issue. Is it trying to regenerate my credentials or something to access the VHD and failing? If so, is there a way to fix it?

Yeah I thought about that too and that isn't the problem in this particular case (also PSSession takes care of the RSAT/HyperV problem). If it was Scenario #1 wouldn't work and scenario #4 would.
Again, this works fine:
Scenario #1 (works)
1.) Remote computer running PS 3.0 (win 7 desktop in this case) enter-pssession Host1
2.) Get-VHD $VHDOnLocalDirectAttachedStorage (Host1 is running guest)
Scenario #2 (works)
1.) RDP to Host1
2.) Get-VHD $VHDOnSMBShare (host1 is running guest)
Scenario #3 (breaks)
1.) On remote computer enter-pssession Host1
2.) Get-VHD $VHDOnSMBShare (host1 is running guest)
Scenario #4 (breaks):
1.) RDP to Host2 server 2012 running Hyper-v with RSAT installed
2.) Get-VHD $VHDOnSMBShare -ComputerName RemoteHost
Scenario #5 (works):
1.) Enter-Psession Host2
2.) Get-VHD $VHDOnHost1LocalStorage -ComputerName Host1

Help! FCP 6.0.6 Export Failed "File Access Denied"

I use HDV video captured via Firewire with a Sony external HDV deck.
In FCP, I use "Easy Setup", Format: HD / Use: HDV-1080i60.
Export using Quicktime (not quicktime conversion) and set export using HDV 1080i60.
No matter the legnth of the sequence, I will get the error message, "File Access Denied", but not until the end of the export! So it will go until the export should be "done", then give me the error message.
All files are on the computer's hard drive, no external hard drives are used to or from when exporting.
Any help would be appreciated! Thanks in advance!

Did you COMPLETELY UNINSTALL FCP before you reinstalled it?
Trashing the icon is not enough - there may be corrupt files remaining which will ruin the new installation.
This article tells you how, together with other troubleshooting techniques:-
http://support.apple.com/kb/TS1846?viewlocale=en_US
Alternatively you can use FCP Remover but it will clear everything from the FCS set of apps:-
http://www.digitalrebellion.com/fcs_remover.htm

Sharepoint 2013 adding ECT fails with "Access Denied by Business Connectivity Service"

Using SharePoint Designer 2013 I am attempting to setup an External Content Type to a SQL DB. I have setup the SQL database with a valid login that was also used to setup an account with the Secure Store Service. I am running SharePoint 2013 designer and
have opened my site with administrative credentials. No matter what, I continue to get the "access denied" message when I try to add this SQL database to my ECT section in SPD. All users have access to invoke the BCS app.
I have deleted and recreated the BCS service application and it is running with farm credentials and temporarily I added the farm account to the local admin account....and again verified that all users have rights to run BCS...
In all other aspects my SharePoint sites are working, I can modify and add via SPD and publish...etc...but I cannot add a connection to an external SQL server. I have also verified through Excel that I can connect to my SQL DB with the same credentials that
I am trying in SharePoint and everything works.
Most of the posts I see in this area relate to permissions or access problems AFTER the ECT connection is created. My problem is I can't even get a connection created.

Here are the error logs that are generated when I try to connect....maybe this will help someone tell me where to correct the issue.....(I removed the actual domain names) but my account was listed which is an admin on the sharepoint system and domain.
06/25/2013 16:48:00.24 w3wp.exe (0x1908) 0x0EE4 Business Connectivity Services Business Data 9f4c Unexpected 'Business Data Connectivity Service' BdcServiceApplication logging server side AccessDeniedException before marshalling
and rethrowing on client side: Access Denied for User '0#.w|"domain\my account', which may be an impersonation by 'Domain\"sharepoint admin account"'. Securable IMetadataCatalog with Name 'ApplicationRegistry' denied access. Stack Trace:
at Microsoft.SharePoint.BusinessData.SharedService.ModelAccessor.Create(MetadataObjectStruct rawValues, MetadataObjectStruct applicationRegistryStruct, DbSessionWrapper dbSessionWrapper) at Microsoft.SharePoint.BusinessData.SharedService.BdcServiceApplication.Execute[T](String
operationName, UInt32 maxRunningTime, ExecuteDelegate`1 operation) 97fe289c-5245-e040-0f76-59614537398e
06/25/2013 16:48:00.24 w3wp.exe (0x1908) 0x0EE4 Business Connectivity Services Business Data g0kc High Access Denied for User '0#.w|domain\my user account', which may be an impersonation by 'Domain\"sharepoint admin account"'.
Securable IMetadataCatalog with Name 'ApplicationRegistry' has ACL that contains: 97fe289c-5245-e040-0f76-59614537398e

Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
we used the same AppID and name with the new package then uploaded the package to the app catalog.
the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
the upgrade fails with access denied even for site collection administrator.
is there really some permission issue or the upgrade can't be done?
We are volunteers, if the reply help you mark it as your answer. thanks!!

Hi,
According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
How did you upgrade a SharePoint hosted app to a provider hosted app?
They are two different type apps, why not just create a new provider hosted app?
To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
There are two articles about creating provider hosted high trust app, you can have a look at them.
http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
http://msdn.microsoft.com/en-us/library/fp179901.aspx
What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

DTR DAV:access-denied

Hi everyone!
I have set up my DTR successfully, and started to use it. When my colleague had problems adding his projects to the repository, I tried adding a "Principal" in my client. I added his userId and the rights I liked to give him. After that, none of us can log in to the DTR. When using the NWDS (2.0.8) it gives me the error message
" Accessing server root property (XCM_CLIENT:minVersion) failed: Forbidden [(pre||post)-condition failed: DAV:access-denied]" in the console.
If I try to log on using my web browser (http://server:port/dtr), it gives me:
" <?xml version="1.0" encoding="utf-8" ?>
- <DAV:error xmlns:x="http://xml.sap.com/2002/12/dtr/xcm" xmlns:DAV="DAV:">
<DAV:access-denied />
</DAV:error>"
How can I get back to using my DTR correctly?
Please advise.
Best regards, Peter

Hi peter,
according to the error report below, I assume, that is caused by missetting of permissions in the DTR. One has set ACLs at a sub-level (probably on /ws) instead of on the ROOT level. Now nobody has access to the DTR any more.
Solution: create a user "superadmin" with the UME. He doesn't need any permissions. Logon with this user on the UME again and change the password. Then logon with this user in the IDE to the DTR and delete all ACL-FILEs from the ws/system/config/active/ACLs. Try after that whether one can logon as e.g. administrator. If it is true, then delete the superadmin user or lock him for security reason.
Regards
Abdul

Server 2008 R2 DC - Access Denied All Logins

This is what the Google has to offer.
http://serverfault.com/questions/376116/cant-login-to-windows-server-2008-as-any-user-not-even-local...

Something weird happened today... I have a BDC that had some updates to do... I ran them and rebooted... When it came back up, I tried to RDP to it but it failed with access denied... I went to the console and I'm still getting access denied... Doesn't matter who logs in... local admins, domain admins, non admins... nothing... I can't figure out what happened... none of my other DC's are having this issue... What do I do?
This topic first appeared in the Spiceworks Community

The system failed to merge, error code : General Access denied

The system failed to merge, error code : General Access denied. Could anyone help me on this

Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out.

Failed to start hibernate.target: Access denied

I upgraded my machine yesterday and the Hibernate item in kmenu->Leave are missing. also "systemctl hibernate" dont work:
$ systemctl hibernate
Failed to execute operation: Sleep verb not supported
Failed to start hibernate.target: Access denied
log:
Mar 08 22:50:56 arch polkitd[720]: Registered Authentication Agent for unix-process:2370:106040 (system bus name :1.86 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Mar 08 22:50:56 arch dbus[363]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.87" (uid=1000 pid=2370 comm="systemctl hibernate -i ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Mar 08 22:50:56 arch polkitd[720]: Unregistered Authentication Agent for unix-process:2370:106040 (system bus name :1.86, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Suspend works fine.
Last edited by ReiserFS (2014-03-09 12:35:46)

I've got this same problem. For me it's because I haven't got a swap partition (even though I thought I set this machine up with one...). Perhaps you also don't have a swap partition, or maybe it's not mounted? Anyway, I would start with the Swap page of the wiki.

Access Denied - Failed to Open Document

I've done a few hours of searching for a solution to my problem with no specific answer helping me.
I recently upgraded 63 various reports from Crystal Reports version 8.5 to Crystal Reports 2011 (using a Windows 7 box). I realigned all of the report fields, and ensured all the variables within the report worked as they did before. Basically all 63 worked like old. I deployed these reports to a Windows 2012 R2 server which has Crystal Reports 2011 installed (as well as Crystal Report Runtime for .Net Framework) and 4 out of 63 no longer work. When I try to open them with Crystal Reports 2011 it gives me an error 'Access Denied [line break] Failed to Open Document' In the Event Viewer for Windows it gives me the following details as to what happened.
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             crw32.exe
Application Version:                           14.0.4.738
Application Timestamp:                     4fd6ccca
Fault Module Name:                          crw32.exe
Fault Module Version:                        14.0.4.738
Fault Module Timestamp:                  4fd6ccca
Exception Code:                                  c0000005
Exception Offset:                                000cf0e5
OS Version:                                          6.1.7601.2.1.0.272.7
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Here are the things I've done to try and troubleshoot/resolve it:
Re-upgrade the original CR 8.5 Report to 2011 and migrate it to server. (Didn't work)
Migrate the original CR 8.5 Report to Windows 2012 Server and try to upgrade it there (Same error on 8.5 report)
Repair/Reinstall Crystal Reports 2011 on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
Repair/Reinstall Crystal Reports Runtime for .Net Framework on Windows 2012 Server via Windows Control Panel->Uninstall Program tool (Didn't Work)
Add three System Environment Variables to enable Crystal Reports Error Logging through CRLogger.dll (LOGGING_DIR = C:\CRLOGGING; LOGGING_ENABLED_ASSERT = 1; LOGGING_ENABLED_RUNTIME = 30)
Now..the error logging gives me error numbers, and which line of which .cpp file is encountering a problem, but that really doesn't help me because I don't have access to Crystal Reports Source Code. (Pasted below for those who are really curious).
I've seen Ludek or other SAP staff shut down discussions with some line about 'Report Development is not a ...' but I feel that this isn't related to how the report was developed and instead something in the application not jiving well with something else.
Any help or suggestions would be incredibly well received and appreciated.
Time Stamp
Thread ID
File Name
Line Number
Logged Data
Level
2015-4-24-12-48-43
3820
..\cserrinf.cpp
523
Error 31831 (..\..\src\data\preQEFileIO.cpp, 3578)
1
2015-4-24-12-48-43
3820
..\cserrinf.cpp
523
Error 31831 (..\..\src\data\preQEFileIO.cpp, 3847)
1

Hi Thomas,
Statistically speaking, 4 out of 63 reports isn't bad for a migration. So something in these 4 reports is different from the others. I've had this happen if there are images or an object inserted into the report and the update doesn't know how to handle that object.
The best way to try and find the problem is by process of elimination. Open the reports again in 8.5 and remove a couple of things at a time. Save it then open in 2011 and see if it fails or not. Continue doing that until the report actually opens. The problem could be anything from a formula or printer settings to attachments.
Good luck,
Brian

HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

Did you install the airport utility for windows?
Is the windows computer set to home as network location.. it will not work if it is set to work or public.
Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
That is usually the most foolproof method.

Hyper-V 2012 R2 roles, access denied, failed to connect to service, AzMan....

Hi All,
I have followed dozens of tutorials to set up roles for Hyper-V, but I keep coming up short. I have no problem managing the five domain-joined 2012 R2 Core Hyper-V servers we have remotely from my Windows 8.1 PC, but I have a lab box I would like to grant
specific permissions to some Help Desk users on.
The key tutorial I have followed is from John Howard (http://blogs.technet.com/b/jhoward/archive/2008/04/01/part-4-domain-joined-environment-hyper-v-remote-management-you-do-not-have-the-requested-permission-to-complete-this-task-contact-the-administrator-of-the-authorization-policy-for-the-computer-computername.aspx),
but it still does not allow a non-admin account to use Hyper-V Manager remotely. Without his tutorial, I get access denied with my "TestUser" account. After following his steps, Hyper-V Manager appears to connect to the server, but says "The
Virtual Machine Management service is not available." Even using his HVRemote with the /show flag, everything shows as PASSED.
Digging deeper, I see dozens of failed audit Event Viewer logs saying "TestUser" is requesting READ to Service Control Manager. That sent me searching, and I found
http://arnoutboer.nl/weblog/?p=300 and http://msdn.microsoft.com/en-us/library/windows/desktop/aa374928(v=vs.85).aspx.
After granting "AU" (Authenticated Users) every permission resembling "read", Hyper-V Manager now shows "There are no virtual machines to show" (or something along those lines); even though I know there are about 30 VMs on this
host. I try to create a new VM (out of curiosity, and now that those options actually appear), and I get permission denied immediately after the create VM wizard pops up.
Why is this such a convoluted process? I would appreciate any help creating Roles for Hyper-V 2012.
Thank you in advance!

Hi Eric (cool name BTW!)
Putting them in Hyper-V Administrators is definitely not an option.
I absolutely believe Microsoft would do something to push you into buying their software; just as we had to purchase Windows 8.1 Pro to remotely manage our 2012 R2 servers. However, as far as I am seeing, AzMan is still in 2012 R2. Whether it works or not
is another story, but AzMan.msc is still there and I can run it on any of our 2012 R2 GUI installs.
Actually just found this:
http://technet.microsoft.com/en-us/library/dn303411.aspx. According to that, it has not yet been removed, but it has been deprecated. From what I am seeing, the Hyper-V portion of it is definitely broken.
I will look into the remote endpoints solution you mentioned. Thank you for the suggestion. I just recently took the plunge into learning C++, so maybe a Hyper-V manager of sorts will be an app to
attempt to write, haha.
Eric Christensen

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

Tn3270 fails on access denied

Similar Messages

Maybe you are looking for