TNS-00511 - Windows XP, 10g XE connection problem
I cannot get connected to my XE instance.
Using sqlplus I can connect no problem, but there's a problem with the listener AND with connecting via http (I suspect the latter caused by the former).
I'm running Windows XP SP3 (Oracle OBI, for those in the know), using DHCP.
A symptom of the problem is this:
C:\Documents and Settings\tferguso>lsnrctl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 13-OCT-2008 20:50
:01
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=tferguso-lap.usoracle.co
m)(PORT=1521)))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
32-bit Windows Error: 60: Unknown error
LSNRCTL>
As is the fact that when I try to start up the OracleXETNSListener service I get the dreaded "The OracleXETNSListener service on Local Computer started and then stopped" dialog ...
my listener.ora and tnsnames.ora are untouched since I installed.
I have no ORACLE_XXX or TNSXXX type envariables.
I would appreciate your help!
Thanks,
Toby
Hosts file (enclosed by leading ---------- and trailing ------------ )
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
C:\Documents and Settings\tferguso>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : tferguso-lap
Primary Dns Suffix . . . . . . . : us.oracle.com
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : oracle.com
us.oracle.com
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont
roller
Physical Address. . . . . . . . . : 00-1C-23-47-CE-14
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.219
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
Lease Obtained. . . . . . . . . . : Tuesday, October 14, 2008 7:42:54 AM
Lease Expires . . . . . . . . . . : Wednesday, October 15, 2008 7:42:54
AM
Ethernet adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . : 00-1F-3C-39-90-BD
Ethernet adapter Loopback:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.25.129
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
Ethernet adapter Cisco VPN:
Connection-specific DNS Suffix . : oracle.com
Description . . . . . . . . . . . : Cisco Systems VPN Adapter
Physical Address. . . . . . . . . : 00-05-9A-3C-78-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 141.144.49.114
Subnet Mask . . . . . . . . . . . : 255.255.240.0
Default Gateway . . . . . . . . . : 141.144.49.114
DNS Servers . . . . . . . . . . . : 130.35.249.52
130.35.249.41
C:\Documents and Settings\tferguso>
The tnsping output is slightly mangled simply because I cut and pasted the DOS cmd console output and I guess the fonts are a little different between that output and this screen on the web ...
Toby
Similar Messages
-
Oracle Forms 10g & Oracle 10g DB Connection Problem
Toady i have installed oracle forms 10g and oracle 10g db when i run my form it gives me this error how can i resolve it
"ora-12154 tns could not resolve the connect identifier specified"
Here are the values in forms 10g tns
# tnsnames.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
IMS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IMS)
and here the values of forms 10g SQLnet
# sqlnet.ora Network Configuration File: C:\DevSuiteHome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
(description =
# (address=(protocol=tcp)(host=localhost)(port=1383))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(connect_data=(rpc=on))
What changes should i make to overcome this problem."ora-12154 tns could not resolve the connect identifier specified"The problem is local to the Forms Home, probably in tnsnames.ora (seems that there are tabs in IMS entry name). Carefully check it.$ oerr ora 12154
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
// - If you are using local naming (TNSNAMES.ORA file):
// - Make sure that "TNSNAMES" is listed as one of the values of the
// NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA)
// - Verify that a TNSNAMES.ORA file exists and is in the proper
// directory and is accessible.
// - Check that the net service name used as the connect identifier
// exists in the TNSNAMES.ORA file.
// - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
// file. Look for unmatched parentheses or stray characters. Errors
// in a TNSNAMES.ORA file may make it unusable.
// - If you are using directory naming:
// - Verify that "LDAP" is listed as one of the values of the
// NAMES.DIRETORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA).
// - Verify that the LDAP directory server is up and that it is
// accessible.
// - Verify that the net service name or database name used as the
// connect identifier is configured in the directory.
// - Verify that the default context being used is correct by
// specifying a fully qualified net service name or a full LDAP DN
// as the connect identifier
// - If you are using easy connect naming:
// - Verify that "EZCONNECT" is listed as one of the values of the
// NAMES.DIRETORY_PATH parameter in the Oracle Net profile
// (SQLNET.ORA).
// - Make sure the host, port and service name specified
// are correct.
// - Try enclosing the connect identifier in quote marks.
// See the Oracle Net Services Administrators Guide or the Oracle
// operating system specific guide for more information on naming.
$ -
Windows 7 and WRT54GS2 connectivity problem
I have a WRT54G2s router - I currently have a XP laptop and Brother printer working wirelessly with this router. I received a new computer that is running windows 7. I can see the router at full strength and am able to connect to it but once I connect the signal is reduced to one bar and never increases. When I see the network before connection it shows at full strength. Any insight as to why this is happening? I have tried disconnecting all other devices from the router to see if there is interferance - also sitting right next to the router the same thing happens. I can hardwire with ethernet calbe and it works fine but once I try wireless - again the W7 computer sees it at full strength but once I make a connection it is so weak I can barely get an internet connection. Please help - this is incredibly frustrating - I have updated to the latest version of firmware and when I try and use the network troubleshooter in windows it tells me it cannot detect the problem and sends me to a website that is of no help.
Did you tried to connect to any other network and checked if you are facing the issue?
Well make sure that you are using Security Mode as WPA2.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...
This should fix the issue for you. -
Windows 8.1 wired connection problem
My computer with Windows 8.1 started to lose internet connection very often (about every minute). I tried to update drivers for network card, even bought new network card with no result. Also, tried to connect directly without router and connection
still drops. Network troubleshooting did not find any problems, no errors are displaying. What may be causing the problem?Hi,
Wired connection, have you checked the cable? Please make sure that it's functioning fine.
You can also test the connection with another PC to find out whether the culprit is your own PC or the ISP.
Yolanda Zhu
TechNet Community Support -
Connection Problem with a 5GHz Network - AVM 7390
I have the problem to connect a MB Air (mid 2011) to the 5 GHz network of an AVM Fritz 7390. Sometimes the request quits with a timeout sometimes the MB connects but I'm not able to reach a webpage or the front end of the router.
With the 2.4 GHz there is no problem. The connection with a Dell windows laptop is no connection problem.
Is this a known problem? Please help.
Thanks a lot.Make sure that your router / wireless access point is set to one of the following channels.
Supported Channels: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
You can see this list in the WiFi section of the System Information screen. -
TNS-00511: No listener- 64-bit Windows Error: 61: Unknown error
SO - windows 2008 server R2 standard
I've install oracle 10g r2 - 10.2.0.4 ( with some problem - i have modified oraparam.ini to install - 6.1 )
Now when i try to start listener but i have some problems :
LSNRCTL> start
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
and
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.11)(PORT=1521
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
LSNRCTL>
i can connect
sqlplus / as sysdba
i can't conn user/user@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.11)(PORT=1521))
i don't have the service OracleOraDb10g_home1TNSListenerWindows 2008 R2 version is not yet certified for Oracle products by Oracle.
You need reconsider your decision of using this operating system or switch to a certified combination. -
Load balancing 10g forms - Connection from new browser window not supported
Load balancing 10g forms - Connection from new browser window not supported
We're experimenting with using webcache to load balance between multiple applications servers running OC4J forms processes.
We currently have one machine with infrastructure and mid-tier (BI & Forms) installed, which is being used for the webcache functionality, this is load balancing between 2 other servers each of which just have the mid-tier (BI & Forms) installation
In order to get this to work, I had to follow the instructions in the Forms deployment guide : http://download-uk.oracle.com/docs/cd/B14099_11/web.1012/b14032/tuning.htm#sthref707
The main gist of this is that you need to set the following in the orion-web.xml file in order that the sessions are maintained:
<session-tracking
cookies="enabled">
</session-tracking>
This all works fine in most cases.
The problem I am having is if I do one of the following on the client machine:
1) From IE6 / IE7 run a copy of a forms application. Then open a new window using the "New Window" menu option, and attempt to run another forms application.
2) In IE7 or Firefox 2.0 open a copy of the forms application, and then open a new tab and try and open another forms application.
If I try either of these I get a FRM-92101 error, and the following is displayed in the java console:
oracle.forms.net.ConnectionException: Connection from new browser window not supported
From trawling various forums (including metalink and otn) it looks like a problem with the way coockies are handled.
Unfortunately the usual workaround is to ensure that the session tracking option in the orion-web.xml file is disabled.
The problem is that I need this enabled in order for the load balancing to work.
Does anyone know of any other workarounds or patches that might help resolve this?
We're using Application server 10.1.2.0.2 running on windows 2003 servers.You were right. Carriage returns were stopping it from working (the document is laid out over separate lines, so I assumed it would make no difference...).
I've now managed to get it so the forms at least run, but they are all being run in the forms OC4J instance on the same machine as the OHS.
Has anyone actually managed to get this to work, or am I doing something wrong?
I did wonder if using an OHS instance on a machine with no forms installation would make any difference?
I had raised a support call via metalink on this subject, but they eventually came to the conclusion that the only way to do this is with a hardware load balancer (Despite several documents suggesting that webcache is the way to go (including the forms deployment manual)).
I'm at the point now of giving up and writing some custom scripts to do the job instead... -
Connection problem to Oracle 11.1.0 on Windows Professional XP (SP2)
Hello
I've recently performed default installations for 3 Oracle Databases, into seperate homes on a newly formatted Windows
Professional XP (SP2) standalone laptop. For all databases Oracle 10.2.0 (rover), Oracle XE (xe) and Oracle 11.1.0 (fido) I
installed APEX and they worked perfectly.
I then installed my Wireless O2 Broadband for my internet which uses DHCP
I am unable to connect to my databases with the wireless broadband connected. I then bring down all databases and turn
off/disable the Broadband,then restart all databases.
Using commands
Set ORACLE_SID=ROVER
sqlplus system/rover@rover
Set ORACLE_SID=XE
sqlplus system/xe@xe
Set ORACLE_SID=FIDO
sqlplus system/fido@fido
Connections are successfull apart from the Oracle 11.1.0 (fido) database with error
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Can anybody identify my connection problem to Oracle 11.1.0 (fido) database by reviewing my listener.ora, tnsnames.ora and
other configuration files below.
Many thanks in advance
Regards
Ade
tnsping results
===============
C:\>tnsping rover
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localho
t)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = rover)))
OK (10 msec)
C:\>tnsping xe
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = bascilic
o)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (30 msec)
C:\>tnsping fido
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos
t)(PORT = 1523)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = fido)))
OK (20 msec)
lsnrctl stat - results
======================
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1523)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.7.0 - Production
Start Date 17-OCT-2009 15:54:12
Uptime 0 days 0 hr. 32 min. 11 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.1.0\db_fido\network\admin\listener.ora
Listener Log File c:\oracle\product\11.1.0\diag\tnslsnr\bascilico\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1523ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bascilico)(PORT=1523)))
The listener supports no services
The command completed successfully
General configuration - Environment variables
=============================================
PATH =
C:\oracle\product\11.1.0\db_fido\bin;C:\oracle\product\10.2.0\db_rover\bin;C:\oracle\oraclexe\app\oracle\product\10.2.0\serve
r\bin;C:\oracle\ohs\bin;C:\oracle\ohs\jlib;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\ATI
Technologies\ATI Control Panel
TNS_ADMIN = C:\oracle\tns
C:\oracle\tns\tnsnames.ora
==========================
ROVER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rover)
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = bascilico)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
FIDO =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1523))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = fido)
Oracle 10.2.0 listener.ora
==========================
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_rover)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Oracle 10.2.0 tnsnames.ora
==========================
ROVER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = rover)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Oracle XE listener.ora
======================
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oracle\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = bascilico)(PORT = 1522))
DEFAULT_SERVICE_LISTENER = (XE)
Oracle XE tnsnames.ora
======================
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = bascilico)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Oracle 11.1.0 listener.ora
==========================
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1523))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1523))
Oracle 11.1.0 tnsnames.ora
==========================
LISTENER_FIDO =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1523))
FIDO =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1523))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = fido)
)For static registration you need to update the 3 listener.ora files.
Exemple:
SID_LIST_LISTENER_FIDO =
(SID_LIST =
(SID_DESC
(ORACLE_HOME = <Oracle Home path>)
(SID_NAME=FIDO)
) -
IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0
Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks -
Found solution for connection problems iPod Nano 3rd gen to Windows Vista!!
Hello people!
I just found a solution to connection problems with iPod Nano 3rd generation when connecting it to a Windows Vista machine.
Because of 'security reasons', Vista asks you to check the drive for errors when connecting the iPod.
The thing to do here:
Click the cross to exit the windows; DON'T CLICK 'do not check drive'!!!!
So just click the red cross to close the window and the iPod should be recognized by iTunes.
Symptoms:
- iPod cannot be recognized by iTunes when you connect it.
- iPod doesn't show up as a drive in Windows Explorer.
I really really hope I solved your problem. Have fun!
JasperHave not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!
-
I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee. I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
Thanks for your help!I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.
-
Oracle 10G connection problem
I launch my db with the following script:
su - oracle -c "export ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 && /u01/app/oracle/product/10.1.0/db_1/bin/dbstart"
su - oracle -c "export ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 && /u01/app/oracle/product/10.1.0/db_1/bin/lsnrctl start"
Here is the output:
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Feb 27 22:17:51 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 188743680 bytes
Fixed Size 778036 bytes
Variable Size 162537676 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Database "orcl" warm started.
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 27-FEB-2004 22:17:59
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.1.0.2.0 - Production
System parameter file is /u01/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.1.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xavan_fi
xe)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.2.0 - Production
Start Date 27-FEB-2004 22:17:59
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.1.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xavan_fi
xe)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
But when i try to connect with sqlplus:
oracle@xavan_fixe oracle $ sqlplus
SQL*Plus: Release 10.1.0.2.0 - Production on Ven. Févr. 27 22:19:32 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directoryWhen you go to get connection you have to set the ORACLE_SID enviroment variable or use the service name in the string to get connection.
Joel Pérez -
Connectivity problems with Windows 7
I have connectivity problems with a Windows 7 machine. It's just lose the wireless connection from time to time, usualy "forgeting" Default Gateway. Any ideas? Please not the same machine did work very well on previus router: the problems did start after I installed Time Capsule as the main gateway. Thanks a lot.
Make sure you setup the TC with SMB compliant names.. short .. no spaces.. pure alphanumeric.
Use fixed channels.. not auto. Set a different name for 5ghz so it doesn't get mixed up between bands.
Check you have the latest drivers for the particular wireless card in the PC.. eg if a laptop don't download drivers from the laptop manufacturer.. get the ones from the wireless card. -
Pop-up window "Experiencing Connection Problems!"
The last week or so I have had this window (below) popping up on the top right of my screen. There seems to be no logic to when it appears - it goes away on it's own.
Safari is in the forground. "Block Pop-up Windows" is enabled in preferences.
I don't have connection problems.
Safari v6.0 - OSX 10.7.4Thanks - here are the results.
Step 1:
com.Logitech.Control Center.HID
com.Cycling74.driver.Soundflower (1.5.2)
Step 2:
com.craigshopper.GNTPClientService
com.quark.quarkupdate
com.microsoft.office.licensing.helper
com.eskapelabs.MyTVScheduler
com.bombich.ccc
com.barebones.textwrangler
com.barebones.authd
com.adobe.versioncueCS3
com.adobe.SwitchBoard
com.adobe.fpsaud
Step 3:
com.wacom.pentablet
com.Logitech.Control
com.adobe.CS5ServiceManager
com.xerox.printback.daemon
com.google.keystone.user.agent
com.ecamm.printopia
com.akamai.single-user-client
com.akamai.client.plist
com.adobe.ARM.b724ad574990298ebe5adda34990a721f12770ee7a2b9ca2ca747739
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
com.adobe.ARM.925793fb327152fd34795896fa1fb9ffa268b2a852256fe56609efa3
Step 4:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
ApplicationEnhancer.framework
AudioMixEngine.framework
DivX Toolkit.framework
EWSMac.framework
EskapeTVSupport.framework
MOKit.framework
NyxAudioAnalysis.framework
OnOneWidgets.framework
PluginManager.framework
PrintMeSSL.framework
QuarkUpdateInterface.framework
SRFrameBufferConnection.framework
TSLicense.framework
TrMovieMaker.framework
Trinity.framework
Xerces-c-cw8.framework
iTunesLibrary.framework
onOneWelcomeDialog.framework
/Library/Input Methods:
/Library/InputManagers:
Menu Extra Enabler
SIMBL
/Library/Internet Plug-Ins:
.DS_Store
AdobePDFViewer.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
GarminGpsControl.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
NPSVG3.zip
NPSVG3Carbon
NPSVG3ReadMe.html
Photo Center Plugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin
RealPlayer Plugin.xpt
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
SkyCaddiePlugIn.plugin
Unity Web Player.plugin
Unused
flashplayer.xpt
iPhotoPhotocast.plugin
npdivx.xpt
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.Logitech.Control Center.Daemon.plist
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS5ServiceManager.plist
com.wacom.pentablet.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.adobe.versioncueCS3.plist
com.apple.remotepairtool.plist
com.barebones.authd.plist
com.barebones.textwrangler.plist
com.bombich.ccc.plist
com.eskapelabs.MyTVScheduler.plist
com.microsoft.office.licensing.helper.plist
com.quark.quarkupdate.plist
/Library/PhonePlugins:
.DS_Store
/Library/PreferencePanes:
Application Enhancer.prefPane
DivX.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
Logitech Control Center.prefPane
PenTablet.prefPane
QUPreferencePane.prefPane
VersionCueCS3.prefPane
Xerox PrintBack.prefPane
/Library/PrivilegedHelperTools:
com.barebones.authd
com.barebones.textwrangler
com.bombich.ccc
com.microsoft.office.licensing.helper
com.quark.quarkupdate
/Library/QuickLook:
GBQLGenerator.qlgenerator
QuickLookEyeTV.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AlchemyTV.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
CanonMJPEGAVI.component
CanonMJPEGAVIDec.component
CanonText.component
DivX 5.component
DivX Decoder.component
DivX Encoder.component
EyeTV MPEG Support.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Flix Flv.component
Flix Swf.component
TrinityVDIG.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
QXPScriptingAdditions.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
QuarkXPress345.mdimporter
QuarkXPress6.mdimporter
iWork.mdimporter
/Library/StartupItems:
DynDNSUpdater
EyeConnect
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Adobe Wood Type Ornaments 1
Adobe Wood Type Ornaments 2
AdobeFnt07.lst
Agency
AlberMT
AlberMTIta
AlberMTLig
Albertus MT
AntiqOliBla
AntiqOliBol
AntiqOliBolCon
AntiqOliCom
AntiqOliIta
AntiqOliLig
AntiqOliNor
AntiqOliNorIta
AntiqOliRom
Antique Olive 1
Antique Olive 2
Antique Olive Compact
Arial
BaskeBEBol
BaskeBEIta
BaskeBEMed
BaskeBEMedIta
BaskeBEReg
Baskerville.ttc
BerkeleyStd-Black.otf
BerkeleyStd-BlackItalic.otf
BerkeleyStd-Bold.otf
BerkeleyStd-BoldItalic.otf
BerkeleyStd-Book.otf
BerkeleyStd-BookItalic.otf
BerkeleyStd-Italic.otf
Berthold Baskerville
Berthold Imago
BeteNoirA
Bickley Script LET Fonts
Bodon
BodonAntComDDemBol
BodonAntComDDemBol.scr
BodonAntTBol
BodonAntTBol.scr
BodonAntTDemBol
BodonAntTDemBol.scr
BodonAntTDemBolIta
BodonAntTDemBolIta.scr
BodonAntTLig
BodonAntTLig.scr
BodonAntTLigIta
BodonAntTLigIta.scr
BodonBol
BodonBolIta
BodonIta
BodonPos
BodonPosCom
Bodoni 1
Bodoni Poster Compressed
BookmOldSty
BookmOldStyBol
BookmOldStyBolIta
BookmOldStyIta
Burrito
CASTERA
CASTERA.bmap
Cadeaulx
Cairo.ttf
Carta
Carta.
Clare
ClareBol
ClareLig
Clarendon
Comet
CompactaLTStd-Black.otf
CompactaLTStd-Light.otf
CompactaLTStd-LightCm.otf
CoopeBla
CoopeBlaIta
Counterscraps
Cream and sugar
Crimescene Afterimage
Dahrlin
Daily News
DailyNewBol
DailyNewBolIta
DailyNewExtBol
DailyNewExtBolIta
DailyNewIta
DailyNewMed
DailyNewMedIta
DailyNewReg
Dividers
Economica-Bold-OTF.otf
Economica-BoldItalic-OTF.otf
Economica-Italic-OTF.otf
Economica-Regular-OTF.otf
EurosBolCon
EurosBolExtTwo
EurosCon
EurosExtTwo
Eurostile 2
Fazings one
Folio
FolioBol
FolioBolCon
FolioExtBol
FolioLig
FolioMed
Font Heads
FrutiBlaCn
FrutiBolCn
FrutiCn
FrutiExtBlaCn
FrutiLigCn
Frutiger Condensed
Funstuff
Gando BT
Gill Sans 2 (1,2,4)
GillSanBolCon
GillSanCon
GillSanExtBol
GoodDog Bones
GoodDog Cool
Goudy
Goudy 1
Goudy Extra Bold
GoudyBol
GoudyBolIta
GoudyExtBol
GoudyIta
Guinea pigs
GypsySwiJF
GypsySwitchJF.suit
HelveNar
HelveNarBol
HelveNarBolObl
HelveNarObl
Helvetica Narrow
HelveticaNeueLTStd-BdCn.otf
HelveticaNeueLTStd-BdCnO.otf
HelveticaNeueLTStd-Cn.otf
HelveticaNeueLTStd-CnO.otf
HelveticaNeueLTStd-LtCn.otf
HelveticaNeueLTStd-LtCnO.otf
ITC Machine
ITC Mona Lisa Recut
ITC Novarese
ITC Quorum
ITC Stone Informal
ITC Stone Sans
ITC Stone Serif
ITCAvantGardeStd-Bk.otf
ITCAvantGardeStd-BkObl.otf
ITCAvantGardeStd-Bold.otf
ImagoBoo
ImagoBooIta
ImagoExtBol
ImagoExtBolIta
ImagoLig
ImagoLigIta
ImagoMed
ImagoMedIta
JoannMT
JoannMTBol
JoannMTBolIta
JoannMTIta
Joanna (1-4)
JuneBug
KR Crescent Moons
KR I'm This Many!
KR Kat's Flowers
KR Kat's Flowers 2
KR Music Class
KR Pick A Holiday 2
KR Star Struck
Karate
KissMeKissMeKissMe
Life
LifeBol
LifeIta
LifeRom
Love Letters
Machi
MachiBol
Marig
Marigold
MonaLisRec
Mordred
MyFonts
NovarBol
NovarBolIta
NovarBoo
NovarBooIta
NovarMed
NovarMedIta
NovarUlt
Nueva
NuevaBolExt
NuevaBolExtIta
NuevaIta
NuevaRom
Optim
OptimBol
OptimBolIta
OptimIta
Optima 1 (1-4)
Oxfor
Oxford
PizzaDude Pointers
PizzaDude Stars
Poppl-Laudatio
PopplLauBol
PopplLauBolIta
PopplLauIta
PopplLauLig
PopplLauLigIta
PopplLauMed
PopplLauMedIta
PopplLauReg
PopticsThree
PopticsThreeExtras
Pricedown
QuarkInvisibles.ttf
Quicksilver
QuoruBla
QuoruBol
QuoruBoo
QuoruLig
QuoruMed
REDCIRCL.ttf
RequiDisRom
RequiDisSmaCap
RequiTexIta
RequiTexRom
RequiTexSmaCap
Requiem Display
Requiem Display Small Caps
Requiem Text
Requiem Text Small Caps
Roughwork Demo
Royal Pain
SF_Slapstick_Comic.ttf
Sabon
Sabon SC+OsF
SabonBol
SabonBolIta
SabonBolItaOsF
SabonBolOsF
SabonIta
SabonItaOsF
SabonRom
SabonRomSC
Samba!
ShellAllScr
ShellAndScr
ShellVolScr
Shelley
ShowBoat
Single Stroke
SkaterDudes
Skia.dfont
Squareheads
StempGarBol
StempGarBolIta
StempGarIta
StempGarRom
Stempel Garamond
StoneInf
StoneInfBol
StoneInfBolIta
StoneInfIta
StoneInfSem
StoneInfSemIta
StoneSan
StoneSanBol
StoneSanBolIta
StoneSanIta
StoneSanSem
StoneSanSemIta
StoneSer
StoneSerBol
StoneSerBolIta
StoneSerIta
StoneSerSem
StoneSerSemIta
TitilliumText22L001.otf
TitilliumText22L002.otf
TitilliumText22L003.otf
TitilliumText22L004.otf
TitilliumText22L005.otf
TitilliumText22L006.otf
Tombats Four
USIS 1949.ttf
UTILITY.ttf
Ultimatum
UniveGreMatPi
UniveNewComPi
Universal Greek w. Math Pi
Universal News w. Commercial Pi
VanDijAntD
VanDijAntD.scr
VectoLHBla
VectoLHBlaIta
VectoLHBol
VectoLHBolIta
VectoLHIta
VectoLHLig
VectoLHLigIta
VectoLHRom
Vectora
Verdana
VersaBla
VersaBlaIta
VersaBol
VersaBolIta
VersaIta
VersaLig
VersaLigIta
VersaRom
Versailles
VineLeaFolOneDTC
VineLeavesFolioOne
Webstar BV
Win Pets 2
Wingdings
Wingdings 3
WoodtOrnOne
WoodtOrnTwo
ZingDing
Zitcream
creatures
droid.otf
nevis.ttf
Library/Frameworks:
EWSMac.framework
Library/Indexes:
FindByContent
Library/Internet Plug-Ins:
ClickToFlash.webplugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.925793fb327152fd34795896fa1fb9ffa268b2a852256fe56609efa3.plist
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
com.adobe.ARM.b724ad574990298ebe5adda34990a721f12770ee7a2b9ca2ca747739.plist
com.akamai.client.plist
com.akamai.single-user-client.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.ecamm.printopia.plist
com.google.keystone.agent.plist
com.xerox.printbackd.plist
Library/Mail/Bundles:
MailUnreadMenu.mailbundle
Library/Mail/Bundles (Disabled):
MailUnreadMenu.mailbundle
Library/PreferencePanes:
.37I14469C4O2U
.DS_Store
.localized
AkamaiNetSession.prefPane
MenuMeters.prefPane
Opera Preferences
Printopia.prefPane
TapDexPane.prefPane
hueyPrefs.prefPane
Library/QuicKeys:
Abbreviations
Clips
Equation Functions
Global Variables.qkvariables
Instant Shortcut.qkshortcutd
PlugIns
Saved Searches
Shortcuts
Toolbars
Trigger Functions
Library/QuickTime:
MigliaMPEG2.component
Library/ScriptingAdditions:
YouHelper.osax
Library/Services:
WordService.service
Library/Spotlight:
FontMDI.mdimporter
sh-3.2$
Step 5:
News Ticker, ColorChooser, Microsoft AU Daemon, TapDex, System Events, MagiCal, EyeTV Helper, SecuritySpy, Meteorologist, CNQL2403_ButtonManager, iTunesHelper, HoudahSpotHelper, SmoothCursor, XPSLauncher -
the mac clients are running RDC for mac version 2.1 and they cannot connect to Windows 2008 R2 TS server. They get the error "You were disconnected from the Windows-based computer because of problems during the licensing protocol".
really appreciated if someone have a fix for this.
thanks,
/danHey,
Any proposed answer for this ?
I face the same problem and my environment
and I've got same results as dle2k
1. TS lic mode is set to per user confirmed it works for windows clients.
2. the TS server's system log logged error "The Terminal Server security layer detected an error in the protocol stream and has disconnected the client".
3. the reports shows per user cal has been issued to users. no temp per device cal has been issued.
4. yes, CoRD works .
5. we tried version 2.1.1 of the Mac RD Client but it also does not work.
Maybe you are looking for
-
Want to create a Quotation through Report programming
Hi Expert, I need to create an Quotation in my ERP system through report programming. I just want to know, what are the FM Used for this purpose or any idea about this. I really welcome your great ideas. <removed by moderator> Thanks and Regards, Sha
-
Add IBM.Data.DB2.iSeries.Dll Assembly To SQL CLR Causes Errors
I'm writing CLR procs against DB2. Code works as a standalone. When I try to add the IBM.Data.DB2.iSeries.dll as an assembly to my SQL Server database, I get the following error below. I can't find the assembly in the GAC on my server. What's the dep
-
Open C:\folder\ link as file://C:\folder\
I want to have links (on my local html page) written like C:\folder\ I want that they open as file://C:\folder\ How is it possible to do? Should I define new "c" protocol or something? Firefox 27, Windows 7 Thank you!
-
Just installed office, wont work
I just installed office home and student 2013 on my windows 8 computer. I try to open word or excel and immediately after opening a message pops up reading "a problem caused the program to stop working correctly. windows will close the program and n
-
Interactive form in WD4A - dynamic table - adding rows
Hi, I have a problem with dynamic table in WD4A. User can add row to table by clicking a button on form, but added rows are not transfered to mapped context node in my web dynpro application. I have made a lot of searches on SDN and I have found a lo