Add IBM.Data.DB2.iSeries.Dll Assembly To SQL CLR Causes Errors

I'm writing CLR procs against DB2. Code works as a standalone. When I try to add the IBM.Data.DB2.iSeries.dll as an assembly to my SQL Server database, I get the following error below. I can't find the assembly in the GAC on my server. What's the dependency
chain for this dll?
DJ Baby Anne's Biggest Fan................

See this thread here: https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-000014548896
You may need an updated driver from IBM.
This error message means that a dependency of that DLL cannot be loaded. SQL CLR has a different assembly loading mechanism than CLR running outside of SQL Server. To make a dependent assembly available to SQL CLR you must install it in the database
using the CREATE ASSEMBLY statement.
You should look for a version of this driver that doesn't have a dependency on this assembly, and install the assembly in the database only if you have to.
David
David http://blogs.msdn.com/b/dbrowne/

Similar Messages

Add IBM WebSphere Application Server to Gird Control.

I am trying add IBM Web sphere Application Server to grid control getting below error.
No application servers were found on the host abc.com. If the port is SSL enabled, specify the port number and the Trusted Keystore file name.
Grid control & Websphere are installed on same server.
Can anyone help me out.
Thanks in advance.

Hyperion Analyzer 6.2.x supports IBM WebSphere 3.5.5 and 4.0.3 on Windows NT 4.0, Windows 2000, AIX 4.3 or Solaris 8. What operating system is running on your IBM iSeries server?

IBM DB2 iSeries - 3.1

Hello,
Does new sqldevelopper 3.1 supports IBM DB2 iSeries (AS400) ?
If not, is there an estimated date ?
Waiting so...
Thanks a lot

Certify is located at:
http://www.oracle.com/technetwork/developer-tools/sql-developer/certification-096745.html

What is the most efficient way to pass LV data to a dll?

For efficiency, this question primarily becomes important when passing large arrays, structures containing large arrays, or generally, any large block of data to a dll.
The way the dll setup appears and the .c file it create for the dll call, it appears that labVIEW directly passes data in whatever native passing format LV requires without copying the actual data if you select the "Adapt to Type" as the "Type" option. If I pass an array, for example, the .c file contains the type definition of a labVIEW array, i.e., (size,data), and depending whether I select handle or handle pointer, the data passed is either a handle or handle pointer to the array. Likewise, if I pass a LV structure, the .c file will con
tain the typedef to the structure and the data passed is either a pointer, or pointer to a pointer. These are, I believe, labVIEW native types and do not require copying.
On the other hand if an array is passed as an array type, then it is converted to a C array that requires LV to copy the array on both sides of the call.
I further assume all structures can be passed to the memory manager to be manipulated, although I'm actually not sure that you could resize an array pointer in the dll. That seems a bit dubious, but then I guess upon return LV could query the memory manager to determine the array pointer size.
That�s how I would think things work. If not, could someone please correct me?
Kind regards,
Eric

Eric,
Let me tell you something about me too...
I've been working with LabVIEW for (just) 4 years. That is, 40 hours a week
professionally, 10 hours a week privatelly. I've started with LV4, and went
through all versions and revisions until 6.0.2 (6.1 will come soon, but
first I have to finish some major projects.
During this time I've been working on lots of interfaces with the windows
OS. Some 'dll' things I've worked on: OpenGL interface, MSXML driver,
keyboard hooks, mouse hooks, GDI interfacing, calling LV dll's from
assembler, calling assembler dll's from LV, creating threads, using serial
interrupts, etc. I'm now (also) working on a way to automatically generate
documentation (much more then the 'export VI stings') from a VI. This
requires 'under the hood' knowledge about how VI's work.
When I had to make a fast routine for a project one time, I choose
assembler, because I had this knowledge. Also, I wanted to use pure SIMD
opperations. The operation had to modify an array of DBL's. The SIMD uses
the same format (IEEE 754, I think), so it was easy. But when it came to
testing, it appeard that the routine only paid off if the routine was 'long'
enough. The routine was n*O^2, where n was a parameter. When the array was
large, and n small, the overhead of copiing the array to modifiable memory
was relativelly large, and the LV routine was faster.
When I get a pointer to a LV array, I can use this pointer to modify the
data in the array. This can (I think) only be done if LV copied this data,
just like LV is doing when a wire is split to be modified.
It might be that this copiing can be prevented, e.g. by using other data
types, or fiddling with threads and reentrance... If you want to optimally
benefit from dll's I'd look for a way to keep the data in the dll space, or
pass it once at initialisation. You could use CreateHeap, HeapAlloc,
AllocGlobal, and other functions. You can use these functions in LV, or in
the dll. Once you have a pointer to the (one and only) data space, you can
use this to pass to the dll functions.
I think LV does not show the memory in question in the profiler, but I'm not
sure.
Using the "Adapt to type" option might just result in a internal convertion
during 'compile' time, and might be exactly the same as doing it yourself.
Perhaps you can share a bit about the application you are making, or at
least why you need the speed you are seeking?
Regards,
Wiebe.
"Eric6756" wrote in message
news:50650000000500000025C60000-1042324653000@exchange.ni.com...
Greg,
There are two relevant documents which are distributed with labVIEW,
in labVIEW 6i, (hey, I'll get around to upgrading), the first is
titled, "Using External Code in LabVIEW", the second is application
note 154, "LabVIEW Data Formats".
Actually, a statement Wiebe@air made on my previous question regarding
dll calls, "Do dll calls monopolize the calling thead?" provoked this
line of questions. Based on other things he has said, I gather he is
also using dlls. So as long as we're here let me ask the next
question...
If labVIEW must make a copy of the passed data, does it show up as
additional memory blocks in the vi profiler? In other words, can you
use the profiler to infer what labVIEW is doing, or as you put it,
infer whether there is a clever passing method available?
As a personal note Greg:
First, as a one time engineering student and teaching assistant, I
don't recall hearing or using the terms "magical", or "clever". Nor I
might add, do I find them in print elsewhere in technical journals.
While I don't mind NI marketing in their marketing documents, used
here in this mostly educational forum, they strike me as arrogant,
and/or pompous.
I like NI's products because they work and are reliable. I doubt it
has anything to do with magic, has somewhat more to do with being
clever, but is mostly due to the dogmatic persistence of your
engineers. I rather doubt any of them adjoin the term "magical" or
even "clever" to their solutions. I believe the term "best" is
generally accepted with the qualifier "I've or we've found". At
least, that has been my engineering experience.
Second, many of my questions I can sort out on my own, but I figure as
long as your willing to answer the questions, then your answers are
generally available to others. The problem is that one question seems
to lead to another and specific information gets buried in a rather
lengthy discourse. When I come here with a specific question, it
would be nice to find it asked and answered specifically rather than
buried in the obscurity of some other question. As such, at some
point in these discussions it might be appropriate to reframe a
question and put at the top. In my opinion, that decision is
primarily yours as you have a better feel for the redundancy of
questions asked and/or your answers.
Anyway, the next question I'm posting at the top is, "Do the handles
passed to a dll have to be locked down to insure other threads don't
move the data?"
Thanks,
Kind Regards,
Eric

How can I convert SQL Server 2008 Timestamp to DB2/iSeries Timestamp?

In DB2/iSeries I have a column that accepts Timestamp value. When I try to insert a timestamp value from the SQL 2008 table and into DB2/iSeries table I recieve the following error message:
OLE DB provider "IBMDA400" for linked server "XXX" returned message "SQL0180: Syntax of date, time, or timestamp value not valid.
Cause . . . . . : The string representation of a date, time, or timestamp value does not conform to the syntax for the specified or implied data type and format. *N is either the character string constant that is not valid or the column or host
variable that contained the string. If the name is *N, then the value is an expression specified in the statement. If the string was found in a host variable, the host variable number is 1. Recovery . . . : Ensure that the date, time, or
timestamp value conforms to the syntax for the data type it represents. Try the request again.".
Msg 7343, Level 16, State 2, Line 1
The OLE DB provider "IBMDA400" for linked server "XXX" could not INSERT INTO table "[IBMDA400]".
The SQL timestamp column contains the result in the following format:
2014-04-24 07:39:09.000
And my insert TSQL command is:
INSERT INTO OPENQUERY(XXX, 'Select "TimeOfDeal" from ABCD.TICKETS')
SELECT TimeOfDeal
FROM dbo.Tickets
WHERE DealId = 'ABC123'
I appreciate any help on this issue.

You are right it is a datetime data type in MS SQL, and a Timestamp in DB2.
I cast it to datetime2 and it worked.
Interesting. I would guess that somewhere under the covers, the date value gets converted to a string, and the different default string formats for datetime and datetime2 is illustrated with this statement:
SELECT convert(varchar, getdate()), convert(varchar, sysdatetime())
When I ran it, I got these values:
Feb 23 2015 12:31PM 2015-02-23 12:31:18.3708899
Now, why there is a conversion to string in the first place, I'm afraid I don't have any good answer to.
Erland Sommarskog, SQL Server MVP, [email protected]

Sharepoint 2010 - Visual studio 2010 error - Error occurred in deployment step 'Add Solution': Failed to load receiver assembly

Hello,
I get the following error when trying to attach an event reciver ->
Error occurred in deployment step 'Add Solution': Failed to load receiver assembly . The system cannot find the file specified.
This happens only when i try to change the deployment target from "GlobalAssemblyCache" to "WebApplication".
Steps to reproduce->
1. Create a new feature and add an event receiver. Deploy the solution. Everything works fine.(Since deployment target is GlobalAssemblyCache). If you now change the deployment target to "WebApplication" , it works too.
2. Now, restart visual studio. Change Deployment target to "WebApplication" without deploying the solution. And you get the above error.
3. Every time you restart your visual studio with deployment target as "WebApplication", you will receive this error.
Any idea?? Manual deployment of the solution works fine too.
When i go to virutal path bin directory, the dll is missing because of which the error occurs. Dont know why, it doesnt copy the dll to bin?
Thanks in advance,

Hi,
Feature receivers must be deployed in the GAC & cannot be deployed to private bin of the WebApplication.
Link: http://msdn.microsoft.com/en-us/library/ms469501.aspx
HTH !!!
AnjaliCH-MSFT

DB2 iSeries and zSeries

This post is mostly for the development team. I've seen posts where DB2 iSeries and zSeries will be supported in a future release. Can someone confirm which version (I assume it is not scheduled for release 3)? If it is not schedule, I would be happy to add a feature request in the Developer's Exchange.
thanks -
ket

We can't confirm which release the support will be added in, as the priorities for features in releases can change. I can confirm that we will not support the iSeries and zSeries in SQL Developer 3.0.
Please do continue to vote in this in the Exchange.
Regards
Sue

Edit/add XML data in BI Publisher

Hi
I have a java program that is generating an XML file that I am using as input for my BI publisher for PO report. However, I want to add some extra information(location addresses corresponding to location id) that is not there in the XML and I cannot edit the java program generating it. Is there any way I can do this in BI publisher? Can I edit/add XML data in BI publisher? This is really urgent and I appreciate any help.
Thanks,
Sharmila

You have to edit the package which has the sql query,
without fetching them in xml , you cannot display that.
BIP will not help you to get that into report.
The code which generates the XML data has to edited for sure..
I guess, i helped one guy for similar requirement,
i guess you are asking in the same report..
the java program in turn calls the Pl/Sql package which generates the XML data and pass it to the Java Concurrent Program.
The Pl/Sql package picks data from these views po_headers_xml, po_lines_xml, po_distribution_xml.
you can also add the columns you want to be displayed in these views, and then change the template accordingly.

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

How do I erase a CD read/write disc on my macbook so I can add new data

help!
How do I erase a CD read/write disc on my macbook so I can add new data. If a disc is a RW, I shouldn't i be able to write to it after it already has some data on it?
I get a screen note saying I can't add anything because something is already on the disc... but it's only one little 3 meg file. But apple i info. shows no room on the cd.
How can I erase the cd and reuse it? I find no erase command and when I try to drag the file to the trash, i get another note saying i don't have permission... even tho I've check off the permission box.
sheesh.

Open Disk Utility, choose the CD on the left side and click "Erase" on the right.
Matt

Is it possible to add 'Additional Data C' tab in VA01/VA02/VA03

Hi All,
Is there any way or in config that we can enhance the VA01/VA02/VA02 with one more tab other than 'Additional Data B' tab.
i want to add 'Additional Data C' tab for a requirement.
Please give your valuable comments.
Thanks,
Jaffer Ali.S

Hi ,
It can't done for the VA01/VA02/VA03.
these are available for the .
V45A0001 Determine alternative materials for product selection --->The Description of this enhancement tell us that it determines the alternative materials for product selection. (i.e., If one material is not available what is the other material that has to be used as an alternative. So it is item specific).
V45A0002 Predefine sold-to party in sales document--->By Description we understand that we can predefine sold-to party in the sales document. (i.e., it is used to populate the field sold-to party through user-exit while entering the data. ) But our requirement comes after entering the data in the screen and save button is pressed.
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal---->Copy packing proposal Into Out bound delivery. This description implies that whenever we create a Delivery Order from Sales Order it copies the packing proposal Based on the already created Sales order. So, there is no chance for us to save the data while we create or change a Sales order.
We can't done.
Regards,
Bharani

How do I add simple text to a photo? For example, if I took a photo of a chalk board and wanted to add a date via Lightroom making it look like it was written on the chalk board, how would I do that?

I simply need to know how to do this. Everything online talks about doing this as a watermark feature or during Export only. I need to know how to do this during the Develop stage, if it's possible.
I took a photo of a couple for a pregnancy announcement shoot. We added a chalk board that had the date the birth is to take place written on it, but it didn't show as well when I reviewed the first couple pics. So I erased the chalk board thinking that I could just add the date via Lightroom, but I have been unable to figure it out. Any help would be very much appreciated.

To create a graphic watermark or identity plate for this purpose with a hand written chalk look you would need Photoshop or Elements to create a transparent PNG file so you might as well do the whole thing in one of those programs to start with. You can't do this in the develop stage anyway like you requested.

How to add a data-source.xml to the project to config DB connections and to be SCM'ed

I'd like to explicitly manage a data-sources.xml for my JSP + BC4J project.
Any helps on getting the released Jdev to add a data-source.xml that would then
be what the .ear deploys to OC4J?
Thanks, curt

I have a JSP + BC4J project:
So far my naive experiments to explicitely add data-sources.xml to a
project that is picked up by the deploy to .ear step and put in the
root of the .ear have failed.
Is this one of those gaps like the orion-application.xml file, that has no
solution at present?
Or is the back-door via adding an EJB component to my project, then deleting it??
Thanks, curt

Webelements : does not support when i add the data sourcce& view in HTML

hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasala

hi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie

Add IBM.Data.DB2.iSeries.Dll Assembly To SQL CLR Causes Errors

Similar Messages

Maybe you are looking for