TO 2-step confirmation using either L_TO_CONFIRM or L_TO_CONFIRM_SU

Hi,
I've created a TO using the L_TO_CREATE_MOVE_SU function module. I then need to confirm the TO but through a 2-step confirmation. I've both the L_TO_CONFIRM_SU and L_TO_CONFIRM function modules but have only got errors.
Parameters used for these function modules are as below :
L_TO_CONFIRM_SU
Exporting I_LENUM = <storage unit number>
               I_QUKNZ = '1'
Tables     T_LTAP_CONF = <TO items taken from LTAP>
Error returned - Warehouse number does not exist (new selection required)
L_TO_CONFIRM
Exporting I_LGNUM = <warehouse number>
               I_TANUM = <TO created from the L_TO_CREATE_MOVE_SU FM above>
               I_QUKNZ = '1'
Tables     T_LTAP_CONF = <TO items taken from LTAP>
Error returned - Movement type 000 is not allowed (check your entry)
With both these FMs, I've also tried populating the T_LTAP_CONF_HU tables but the same errors were returned. Can anyone please help with some example on how to use these function modules properly?
Note : The purpose of these function modules is to carry out the functions in transaction LT13 (firstly to pick, and then to transfer)
Thanks and regards,
Adeline.

Hi Maen,
Thanks for your reply.
Firstly, I did try all sorts of combinations, especially with the T_LTAP_CONF and T_LTAP_CONF_HU tables in both the function modules, so yes, I did more than enough trial and error but which still returned the same results.
Now, to answer your guesses :
1. Nope, I did not enter a wrong warehouse number. If you look at L_TO_CONFIRM_SU, you can see that there are no import parameters for warehouse, and warehouse also does not exist within the T_LTAP_CONF nor T_LTAP_CONF_HU tables, so I definitely did not enter a wrong warehouse number by mistake.
2. The TO was created with movement type 999 and again, if you look at L_TO_CONFIRM, there isn't an import parameter which takes in movement type nor does this exist in the T_LTAP_CONF nor the T_LTAP_CONF_HU tables which I've also used.
Can anyone else provide an insight into this?
Thanks and regards,
Adeline.

Similar Messages

Confirming TO with 2-step confirmation using L_TO_CONFIRM

I have been using function module L_TO_CONFIRM in several programs with good results, but now I have a scenario where 2-step confirmation is enabled, which means that the TO is confirmed in two steps (with manual confirmation using LT12 you first confirm the "pick" and then in a second confirmation the "transfer").
I have not found a way to do this with L_TO_CONFIRM. The documentation (long text for structure LTAP_CONF) talks about many variants, and even mentions 2-step confirmations in connection with TO splitting, but it never explains how to actually perform the 2-step confirmation. Anyone that has any experience with this? Useful answers will of course be rewarded.
/Leif

I am interested in configuring the 2-step confirmation, but seem to be missing something in config. Can you give me the required config items for this functionality? Thanks.

Two step confirmation for warehouse tasks in EWM

Hello everybody,
I am working on an internal prototyp to evaluate SAP EWM. Therefore it is essential that we use "two step confirmation" for warehouse tasks. Step one: confirm pick up of a pallet; Step two: confirm transportation of a pallet. Like it is used in SAP WM (Parameter I_QUKNZ in function module L_TO_CONFIRM and in standard SAP).
I haven't found anything similar to that in EWM so far. I searched in the official EWM SAP Press book and also in google. But right no I don't have any idea.
Do you guys have any hints on how to achieve two step confirmation somehow?
Many thanks in advance!
Stef

Hi Jürgen.
Thanks for your input! You are right, it works with RF!
But it works kind of strange. Deleting source storage bin, creating another position etc.
I will have a look how to adapt this.
Thanks!

Need config steps to use LM80 transaction to capture serial numbers

Hi,
Our shipping process is:
1. Create delivery (This automatically creates a TO)
2. Confirm TO
3. PGI
If the material is serialized, capturing the serial numbers via VL02N > Extras and then do PGI.
But due to limitation of scanning only 19 serial numbers at a time in VL02N transaction, have to keep scrolling manually to scan more than 19 serial numbers, we want to use LM80 transaction to capture serial numbers.
I need step by step configuration changes and processing steps to use LM80 transaction. As a note, we do scan serial numbers in to system as our business requires scanning 100 serial numbers at times.
Thanks in advance.
-Sri

Hello Alexander,
Firstly, considering the first and last serial numbers and filling in the rest is good. But the challenges will be as follows:
1. What happens if the difference between the first and last is too huge? The user will see a huge list of numbers.
2. What if some in-between serial numbers are consumed already?
One probable solution can be:
1. The system suggests the unconsumed serial numbers for picking based on the actual quantity that has to be picked.
2. The user can either choose these serial numbers or modify the list with scanning based on actual picks.
The solutions can be many based on the actual way the materials are organized in the warehouse.
Regards,
Dilip
http://www.indience.com (Enterprise Mobile Company)

Please confirm use of mini DVI-Video (s-video) cable with Macbook

Hi,
I have tried to use the Mini DVI-> Video cable with my new Macbook in order to be able to connect to my TV.
Unfortunately it doesnt work, I do get the resolution change when I plug in the cable but nothing on the TV. I went back to the local Apple center and they tested the cable on a Powerbook G4, it worked flawlessly. Then they tried a monitor on my Macbook's DVI port, it also worked.
But when trying the mini DVI to Video cable on the Macbook, no luck!
Can anybody please confirm they have used this cable and connected successfully to a TV?? Using either the s-video option or composite?
Thanks in advance!!!
Best Regards,
Thomas
G5 DP2.0, Macbook Mac OS X (10.4.6)

I can confirm that the s-video connection to a standard CRT TV using the mini-DVI video adapter does NOT work with my MacBook.
The display is detected, and when mirroring is enabled, the resolution on the MacBook display is adjusted, but the TV doesn't display the MacBook signal. Instead, I get a black screen or some random flickers of color. Following the instructions in the help files, I've adjusted the resolution down to its lowest level with no success.
My guess is that this is related to the fact that the integrated graphics relies on system RAM, and I am running my machine with the stock 512 Mb RAM it shipped with (2 GB are on their way).
On the off chance it would help, I even tried closing the display, in hopes that the memory savings from turning off the MacBook display would enable the TV signal, but no luck.
Thomas, how much RAM do you have in your MacBook?
Those of you who have been successful using external displays, are any of you using the stock 512 Mb RAM?
2.0 GHz Core Duo MacBook (Black), 512 Mb RAM Mac OS X (10.4.6) Dual 500 MHz G4 "Gigabit Ethernet"

Two step confirmation with RF device (Mobile Data Entry) - 1st step only

Hello
I want to implement the following scenario:
- WM transfer orders are created, relevant for two step confirmation;
- a user working with RF device confirms the 1st step - picking;
- then the materials are transported physically to another building (the same warehouse number);
- another user working with RF device confirms the 2nd step - putaway.
For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
regards

Hi Vlad,
One more information, which i would like to communicate on this issue.
We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
SAP has suggested to test the scenario , without any enhancement on screen 1302.
Still we are in discussion with SAP, and try to find out the resolution.
Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
Thanks & Regards,
Raj.

Project online licenses is purchased via OLP, what is the next step to use project online?

hi,
Project online licenses is purchased via OLP (Open License program), what is the next step to use project online?
tnx

I recently had this with a client using Exchange Online. You should have recieved a Microsoft Licence Confirmation.
From memory I had to login to the OLP tool, and associate these with an O365 account. Your reseller who you bought the licences from should be able to help
Ben Howard [MVP] | web |
blog | book

Blob upload using either forms 9i or plsql

I would like to upload over 100 thousand different images (.doc, .pdf, .txt, .gif, .xls, etc.) into an Oracle 9i database using either Forms 9i Release 2 or plsql. I would like to do this in one batch program... Would anyone please give me some ideas?
I tried using the bin2hex program and the initialize_container in Forms 6i but there is no such command in Forms 9i...
Thanks in advance,
Terry Sicard

Take a look at the following :
Re: Storing a PDF in a BLOB
Re: Retrive Image from DB into Image_item
although the threads above are reffered to images and word doc... the procedure/steps are the same....
Greetings...
Sim

Two step confirmation in Warehouse

Hi All,
Two step confirmation (We can use this indicator to define whether confirmation of the withdrawal of materials from a storage bin and arrival of materials at the target storage bin is allowed in the warehouse in two steps) indicator has been set for my warehouse.
As the two step confirmation is becoming heavy for the warehouse team, that need to be changed as a single step confirmation.
Will there be any impact on open TOs if i change this from two step to single step confirmation. Will there be any other impacts on warehouse environment.
Rgds
Raul

My suspicion would be that the configuration settings are referenced during TO creation and that TOs are then 'locked' with these settings. So the impact would not be significant, all existing TOs, just created or part processed would need to be completed using 2-step and that new ones would be single step.
Why not just trial it in your development system. Possibly all TOs just become single confirmation and the pick confirmation for existing TOs, where that has happened, becomes irrelevant.
Regards,
Nick
Edited by: Nick Whitehurst on May 21, 2010 3:30 PM

Two Step Confirmation Transfer Order with Radiofrquency

Friends & Gurus.
Can I use 2 step confirmation with RF? Which transaction should I use? I can do it with regular SAP transactions, but as soon as I do it with RF transactions both Pick and Transfer are confirmed.
Thanks.
Solved, yes you can.
Edited by: albertiosis on Oct 3, 2008 2:48 PM

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
--> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

WM - Two step confirmation cancellation

Hi Gurus,
I am using the two step confirmation for transfer order in one of my business process (no 2 step picking).
This is a necessary requirement from my client, but I have a little issue with the cancellation. Once the first step is confirmed, all the cancellation transactions issue the error message #L3355.
Physically, the forklift driver should be able to confirm the first step of picking, and also to cancel this first step. However, there seems not to be a standard transaction to cover this "normal" requirement.
Does anyone has an idea on how this process could be carried out in the system ?
Thanks in advance.
Best Regards,
Remi

If you check the code in...
include: ML03TF90_STORNO_PRUEFEN
form: STORNO_PRUEFEN
...you will see that this is the standard behaviour of the system. SAP online help also says:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e744afa11d182b90000e829fbfe/frameset.htm
If a transfer order has already been confirmed, the only way to change a goods movement to restore the original stock situation is to create a new transfer order.
So, in standard system you have to create a new TO or you have to go to development / modification of standard code.
(one )
Edited by: Csaba Szommer on Apr 6, 2011 6:35 PM

TO two step confirmation - return transfers

Hello,
I have set two step confirmation for OT and everything seems ok. I used LT1D for the picking confirmation and LT1E for positioning confirmation. The problems is when in the OT there is a return transfer to a storage type. For example
200 picked from strorage type A
100 positioned in storage type B
100 positioned in storage type R
R is the return storage type (set in customizing for the A storage type in picking strategy section)
In this case the two step confirmation doesn't work. SAP gives the message that two step confirmation is not allowed. I can only confirm with LT12 that is in a single step.
I haven't found any SAP notes for this topic, can someone help me please?
Thank you very much.
Bye Bye,
Andrea

Hi Vlad,
One more information, which i would like to communicate on this issue.
We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
SAP has suggested to test the scenario , without any enhancement on screen 1302.
Still we are in discussion with SAP, and try to find out the resolution.
Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
Thanks & Regards,
Raj.

LT45 (Picking Progress) and Two Step Confirmation

Dear all,
I have Two Step confirmation in place for one WM movement type and I am happy with it.
We also use Multiple Processing for Deliveries. As a result, the Groups created by this process are used to monitor the Picking Progress in LT45
In LT22 or LT24 there is clear distinction between Open TO's, Confirmed TO's and half Conirmed TO's (yellow triangle.
Much to my disappointment I cannot see such a distinction in LT45.
Is there a way or another Monitor available that does show me the different statusses? A yellow bar if the group is half confirmed is too much to ask, but an alternative would be nice.
Thanks!
Sandeep

Ananthram,
Thanks for reading my Question.
I am talking about TO's that use Two-step Confirmation. In LT22 / LT24 they show as Yellow Triangle, as you know this means half confirmed.
As you know in LL01 they don't show as yellow but as red, just like in LT45. So this is very misleading.
Can you tell me a place where I can clearly monitor my Picking Progress and see a distinction between Green, Yellow and Red
(Confirmed, Half confirmed, Open)
Thanks again for taking the time.
Sandeep

TO 2 steps confirmation BAPI.

Hi everybody,
I'm trying to perform a 2 steps confirmation of a TO with the FM L_TO_CONFIRM, but I don't find anything in the FM, where I can specify that is a 2 steps confirmation (first pick and then transfer). Do you know how can I do that? or Do you know another FM or BAPI to do that?
Regards.

Exists a parameter called I_QUKNZ where we can especify if the confirmation is two steps or one step.

System-guided putaway with 2 step confirmation

Hi gurus,
I have configured 2 step confirmation and works fine. But now my client want to use RF System-guided putaway, so one forklift driver confirms the picking process and a second forklift driver confirms the TO with the destination storage bin. The first step is done normally using System-Guided but the problem occurs on the second step, because system-guided can not find any TO for execution, even though the TO hasn't been totally confirmed.
Any help more than appreciate.
Eduardo.

I am interested in configuring the 2-step confirmation, but seem to be missing something in config. Can you give me the required config items for this functionality? Thanks.

TO 2-step confirmation using either L_TO_CONFIRM or L_TO_CONFIRM_SU

Similar Messages

Maybe you are looking for