System-guided putaway with 2 step confirmation

Hi gurus,
I have configured 2 step confirmation and works fine. But now my client want to use RF System-guided putaway, so one forklift driver confirms the picking process and a second forklift driver confirms the TO with the destination storage bin. The first step is done normally using System-Guided but the problem occurs on the second step, because system-guided can not find any TO for execution, even though the TO hasn't been totally confirmed.
Any help more than appreciate.
Eduardo.

I am interested in configuring the 2-step confirmation, but seem to be missing something in config. Can you give me the required config items for this functionality? Thanks.

Similar Messages

TRM two step confirmation

Hi
I am new to TRM and have run into the following problem.
I have configured the Site and the WH and am performing System guided Putaway (PTWY_SG). As required in WM for the source and destination storage type i have maintained separate confirmation.
After the Transfer order is created, as expected it shows up in the TRM monitor. From the monitor i have created the task for the TO. Once i login via the RF device the task shows up and i execute force confirmation for the same.
Now the situation is that the TO is confirmed partially (the pick step of the 2 step confirmation is processed but the putaway step is not performed). However as i login i cannot see any other task to execute the second step.
If i check the TRM monitor there is only the task which i have forced confirmed. Now how to execute the second step so that the TO is fully confirmed.
Can some one help me with the std process to go ahead with the same.
Sandeepan

Hi Sandeepan,
Can you please check the two settings in tcode OMLX (Path:IMG u2192 Logistics Execution u2192 Warehouse Management u2192 Activities u2192Confirmation) The first of these is the requirement to confirm the pick and placement of a transfer order separately and the second is the requirement to confirm placement and removal of stock into and out of a storage type. For the second setting, by default, the requirement to confirm is switched off in interim storage types.
Other than above setting you need to check which mode is considered to find the rout till destination bin of the TO.
Hope this will help.
Regards,
Sudhir

System guided RF processes

Dear experts
Can someone explain how can i use system guided putaway & picking with RF queue.
thank you

Hello,
As clearely mentioned in your other thread in which I answered that if you add system guided transaction in RF menu system prompts the next assignment on Rf device. For this your all RF configuration should be in place.
System guided RF transactions guides user with new To's to be executed.
Regards,
Prashant

Two step confirmation with RF device (Mobile Data Entry) - 1st step only

Hello
I want to implement the following scenario:
- WM transfer orders are created, relevant for two step confirmation;
- a user working with RF device confirms the 1st step - picking;
- then the materials are transported physically to another building (the same warehouse number);
- another user working with RF device confirms the 2nd step - putaway.
For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
regards

Hi Vlad,
One more information, which i would like to communicate on this issue.
We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
SAP has suggested to test the scenario , without any enhancement on screen 1302.
Still we are in discussion with SAP, and try to find out the resolution.
Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
Thanks & Regards,
Raj.

Two Step Confirmation Transfer Order with Radiofrquency

Friends & Gurus.
Can I use 2 step confirmation with RF? Which transaction should I use? I can do it with regular SAP transactions, but as soon as I do it with RF transactions both Pick and Transfer are confirmed.
Thanks.
Solved, yes you can.
Edited by: albertiosis on Oct 3, 2008 2:48 PM

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
--> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

Confirming TO with 2-step confirmation using L_TO_CONFIRM

I have been using function module L_TO_CONFIRM in several programs with good results, but now I have a scenario where 2-step confirmation is enabled, which means that the TO is confirmed in two steps (with manual confirmation using LT12 you first confirm the "pick" and then in a second confirmation the "transfer").
I have not found a way to do this with L_TO_CONFIRM. The documentation (long text for structure LTAP_CONF) talks about many variants, and even mentions 2-step confirmations in connection with TO splitting, but it never explains how to actually perform the 2-step confirmation. Anyone that has any experience with this? Useful answers will of course be rewarded.
/Leif

I am interested in configuring the 2-step confirmation, but seem to be missing something in config. Can you give me the required config items for this functionality? Thanks.

I want to deployment WSUS for our company. So I need step by step guide line with screenshot and video link

I want to deployment WSUS for our company. So I need step by step guide line with screenshot and video link.
Thanks,
Qamrul

I was more interested in writing a script in PowerShell to automatically deny Itanium server updates.
Would you happen to know a good article on this?
I believe this topic has been discussed in this forum, so I'd start by searching the forum.
Beyond that, your best friend in PowerShell script efforts is going to be CodePlex. There may be one posted there, already written.
As a technical reference, you'll need to be familiar with the WSUS API, and the
Software Development Kit is available on MSDN.
You can definitely do this with PowerShell. (I actually do it with a feature of SolarWinds Patch Manager which does it via an API call.)
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Can u guide me with the steps to create user

can u guide me with the steps to create user

Hi,
To create the users and give certain permissions to them please follow the steps mentioned below:
1> Log in to the Administration and open the RPD in Online mode.
2>Click on Manage----->Security
3> It will show a window which will show the users, groups etc.
4> Select the User option.
5> On the right hand side of the window Rightclick and select new user.
6> A window will appear where you have to type the user name, description and password and click ok
7> YOur user is created . Now save the RPD.
8> Login to the Presenation Services with the User you have just created. This will create the user in your presentation.
9>now logg off and log in with the administrator user.
10> Now go to the Settings----->Administration------>Manage Interactive dashboards and give the permissions you want to.

Two step confirmation in Warehouse

Hi All,
Two step confirmation (We can use this indicator to define whether confirmation of the withdrawal of materials from a storage bin and arrival of materials at the target storage bin is allowed in the warehouse in two steps) indicator has been set for my warehouse.
As the two step confirmation is becoming heavy for the warehouse team, that need to be changed as a single step confirmation.
Will there be any impact on open TOs if i change this from two step to single step confirmation. Will there be any other impacts on warehouse environment.
Rgds
Raul

My suspicion would be that the configuration settings are referenced during TO creation and that TOs are then 'locked' with these settings. So the impact would not be significant, all existing TOs, just created or part processed would need to be completed using 2-step and that new ones would be single step.
Why not just trial it in your development system. Possibly all TOs just become single confirmation and the pick confirmation for existing TOs, where that has happened, becomes irrelevant.
Regards,
Nick
Edited by: Nick Whitehurst on May 21, 2010 3:30 PM

Two-step confirmation of Transfer order in WM

Hi
We are confirguring 2 step confirmation.
We have activated 2step conf, for the warehouse & marked corfirmation mandatory for the storage types,
However we are not able to perform confirmation for Pick & Transfer step.
Please let us know on how to configure two step confirmation.
Thanks,

Hello Abhay Desai,
Please kindly refer to SAP Library which has provided the following documentation on 2-step picking:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm
I would suggest you to go through the prerequisites and steps in 2-steps pikcing in the given documentation. You should also be able to access to above with the following path:
http://help.sap.com >> SAP Library
--> SAP ERP Central Component
       --> Logistics
            --> Logistic Execution
                 --> Warehouse Management System
                      --> Goods Issue
                           --> Two Step Picking.
Hope the above helps. If question answered, please close and reward points. Otherwise feel free to get back.

WM - Two step confirmation cancellation

Hi Gurus,
I am using the two step confirmation for transfer order in one of my business process (no 2 step picking).
This is a necessary requirement from my client, but I have a little issue with the cancellation. Once the first step is confirmed, all the cancellation transactions issue the error message #L3355.
Physically, the forklift driver should be able to confirm the first step of picking, and also to cancel this first step. However, there seems not to be a standard transaction to cover this "normal" requirement.
Does anyone has an idea on how this process could be carried out in the system ?
Thanks in advance.
Best Regards,
Remi

If you check the code in...
include: ML03TF90_STORNO_PRUEFEN
form: STORNO_PRUEFEN
...you will see that this is the standard behaviour of the system. SAP online help also says:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e744afa11d182b90000e829fbfe/frameset.htm
If a transfer order has already been confirmed, the only way to change a goods movement to restore the original stock situation is to create a new transfer order.
So, in standard system you have to create a new TO or you have to go to development / modification of standard code.
(one )
Edited by: Csaba Szommer on Apr 6, 2011 6:35 PM

TO two step confirmation - return transfers

Hello,
I have set two step confirmation for OT and everything seems ok. I used LT1D for the picking confirmation and LT1E for positioning confirmation. The problems is when in the OT there is a return transfer to a storage type. For example
200 picked from strorage type A
100 positioned in storage type B
100 positioned in storage type R
R is the return storage type (set in customizing for the A storage type in picking strategy section)
In this case the two step confirmation doesn't work. SAP gives the message that two step confirmation is not allowed. I can only confirm with LT12 that is in a single step.
I haven't found any SAP notes for this topic, can someone help me please?
Thank you very much.
Bye Bye,
Andrea

Hi Vlad,
One more information, which i would like to communicate on this issue.
We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
SAP has suggested to test the scenario , without any enhancement on screen 1302.
Still we are in discussion with SAP, and try to find out the resolution.
Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
Thanks & Regards,
Raj.

Two step confirmation

Hi All
Do we have any thing like two step confirmation in Warehouse Management.
Thanking you
With Rgds
Vinod

Yes it's a terminology where the stock removal and putaway requires two separate confirmation. You can have a look in T-code OMLX and click on Mvt Type button for more info.
Amit

Configuring guided procedure with Uwl

Hi experts,
Iam configuring guided procedure with Uwl.
First step : - the first step in it is to create a new system and it is of they type "com.sap.portal.systems.webservices portal archive (PAR)" , with url "http://<host>:<port>/GPWorkItemProvider/Default?wsdl" i have given this url.
Second step:- My second step is to be able to access and use the GPWorkItemProvider Web service, you have to configure the relevant Web service security options first:
Under Web Services, select Security Configuration -->Web Service Clients -->sap.com To be able to access and use the GPWorkItemProvider Web service, you have to configure the relevant Web service security options first:
Under Web Services, select Security Configuration --> Web Service Clients --> sap.com cafeugpmodeluwlproxy ---> com.sap.caf.eu.gp.model.uwl.proxy.facade*DefaultPort_Document.
.but i could not find this link there "sap.com cafeugpmodeluwlproxy ---> com.sap.caf.eu.gp.model.uwl.proxy.facadeDefaultPort_Document*"
give me a solution pls
thanks in advance

Sriramakrishnan-
Here is how you configure your UWL with GP:
1. Login as an administrator into your Enterprise Portal and navigate to System Administration -> System Configuration
2. Click on Universal Worklist Administration in the Universal Worklist and Workflow folder under Detailed Navigation
3. Click on the New button to create a new UWL System.
4. Provide a System Alias of your choice, and choose the Connector Type as GuidedProceduresConnector and click on Save
5. Initiate your GP Process and you should see it in the UWL of your processor: login as the processor and navigate to Home -> Work
I do not recall making any changes to any web services.
Cheers-
Atul

Configuring Guided Procedures with the Universal Worklist

hi experts,
Pls give me the steps to Configure Guided Procedures with the Universal Worklist....
I have the help file with me but it doesn't work ... and my configuration is NWDS 7.0 sp9.
pls help me
with regards,
sriram

Hi,
You can configure your system so that the tasks generated in Guided Procedures (GP) workflows, both on local and remote systems, are displayed in the Universal Worklist (UWL) together with the tasks pertaining to other SAP NetWeaver Portal work areas.
You perform the configuration steps on the consumer side:
       1.      Create a portal system, specifying the host name, HTTP port of the GP tasks provider and, if available, the WSDL of the relevant service.
       2.      Register the system as the item provider for UWL and configure it for remote access.
You establish the connection between GP and the UWL by assigning a system alias.
       3.      In UWL, browse all pending GP tasks assigned to your user.
You can only view tasks assigned to your user, that is, the logon ID of the user on both systems must match.
Prerequisites:-
a) You have been assigned the System Admin portal role to be able to create portal systems and aliases. For more information, see Administration Roles.
b) You have been assigned the Standard User role to be able to access UWL in the portal. For more information, see Default Portal Content for Standard Users.
c) You know the host name of the system from which you want to retrieve GP tasks
Step by Step Procedure guide can be found out at
[Step by Step Procedure for COnfiguring GP with UWL|http://help.sap.com/saphelp_nw04s/helpdata/en/43/ef06a7860c7061e10000000a1553f6/frameset.htm]
Hope this helps,
Regards,
Shailesh Nagar

System-guided putaway with 2 step confirmation

Similar Messages

Maybe you are looking for